When the summary-address is deleted, `ospf_aggr_handle_external_info` is
called for each aggregated route for the cleanup. It needs to find the
corresponding OSPF instance and it does it using the `ei->instance`
which is totally wrong, because it's the instance from which the route
is redistributed, not the local OSPF instance. A pointer to the correct
OSPF instance is already stored in the external_info structure.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Update verify_ospf6_neighbor() so we can verify there are no
neighbors in a given router
input_dict = {
"r0": {
"ospf6": {
"neighbors": []
}
}
}
result = verify_ospf6_neighbor(tgen, topo, dut, input_dict)
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
RFC 3101 states both E-bit and N-bit need to be checked when receiving a Hello packet.
"To support the NSSA option an additional check must be made in the function
that handles the receiving of the Hello packet to verify that both the N-bit
and the E-bit found in the Hello packet's option field match the area type and
ExternalRoutingCapability of the area of the receiving interface."
This PR adds the check for the N-bit
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
An OSPF ABR, while in the process of announcing summary LSAs,
checks whether it's connected to the backbone area. If not, then
all summary LSAs are invalidated and not announced (or flushed)
while the missing backbone connectivity persists.
The backbone connectivity check consists of assessing whether
there's at least one fully formed adjacency in the backbone area. The
problem is that this check can fail unexpectedly if the router is
acting as a helper for a neighbor that is performing a graceful
restart. This is because there's a short interim of time in which
that neighbor's state will oscillate between ExStart and Full during
the LSDB synchronization process.
To address that issue, update ospf_act_bb_connection() to consider
neighbors performing a graceful restart as if they were fully
adjacent (which is what a GR helper should do).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RCA: When upstream transition from Joined to NotJoined due to SGRpt
prune, then only SGRpt prune was sent and SG Prune is missed.
Fix: Send SG Prune towards source as well as SGRpt prune towards RP.
Signed-off-by: sarita patra <saritap@vmware.com>
The interface area command is deprecated under
router ospf6 and should be on the individual interface.
Let's modify the tests to not actually put the
interface foo area 0.0.0.0 command under the
router node.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When using build_config_from_json there exists a timing
window where neighbors can come up before the router-id
is applied. As a precaution, quickly clear the neighbors
to ensure that we get neighbors with the expected router-id.
This can especially happen under high system load.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The test_ospf_dual_stack test had area configuration
under the `router ospf6` nodes. This is getting
lots of warning messages from the cli. Let's remove
this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When testers use the build_config_from_json function
the create_router_ospf function is double creating
the ospfv3 cli to be passed in. This is because
the create_router_ospf loops over both v2 and v3
and then create_router_ospf6 re-adds v3.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The ospf_basic_functionality/test_ospf_lan.py creates
a ethernet segment and attaches 4 routers to it and
assigns ip addresses in a /24. As one of the tests
it picks a new address for r0 which coincides with
a ip address on r3. Then the test immediatly
checks for other data. The problem is of course
that if a test is `slow` enough hello's will
start to be ignored from r3 to r0 and the
neighbor relationships will come down. Choose
an ip address that doesn't cause this issue.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The new bgp_route_server_client test is not setting the
timers for peers to be fast enough to have the ability
to converge in under 60 seconds if a packet is dropped/missed
at startup. Make the test have the ability to converge
under load
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The external_id_table was only ever used to store pointers to data
and was never used for lookup during the course of normal operations.
However it did lead to crashes because somewhere along the way
external routes stored in the external_table never had their
id associated into the external_id_table and we would assert
on the node lookup failing.
Since this code was never used for anything other than
storing data and it was never retrieved for anything useful
let's just remove it from ospf6d.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
