Modifying name of struct igmp_source to struct gm_source, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Fix:
====
Modifying name of struct igmp_join to struct gm_join, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Abhishek N R abnr@vmware.com
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
When both ripd and eigrpd run at the same time, all key configuration in
key chain node is duplicated. This change adds a concept of nested nodes
into vtysh to fix the issue.
Before:
```
key chain test
key 1
key-string 1
exit
key 1
key-string 1
exit
exit
!
```
After:
```
key chain test
key 1
key-string 1
exit
exit
!
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Per RFC 5880 section 6.8.12, the use of a Poll Sequence is not necessary
when the Detect Multiplier is changed. Currently, we update the Detection
Timeout only when a Poll Sequence is terminated, therefore we ignore the
Detect Multiplier change if it's not accompanied with RX/TX timer change.
To fix the problem, we should update the Detection Timeout on every
received packet.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
YANG leaf means "enable" while CLI command is "disable".
So we should use "no" when the leaf is "true", not "false".
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issue: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Add optional NHG ID output to `show ip route` dumps. We have
this in json output already as nexthopGroupID but nice
to have the option in a normal dump as well. Not including in main
output for now to avoid breaking screen scrapers.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Don't hide the LABELED_UNICAST safi when processing route
updates; map it where necessary (to use the UNICAST table
for instance).
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Lot's of the GR topotests kill daemons in order to test code
that deals with crashing daemons. Under heavy system load
it was noticed that a kill command was sent and if told to
wait we would sleep 2 seconds send another kill command and
call it good. This was causiing issues when subsuquent
json commands would get errors like `lost connection to daemon`
as the daemon finally shut down after some time due to load.
Modify the kill the daemon function to notice that the daemon
was not actually killed and if we need to wait wait some
more time for it too happen
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
On startup we create a thread timer event to do a rib sweep
of the system. On shutdown we never stopped this timer and
as such we have a situation where a thread event could be run
on shutdown after the data for it has been freed. Here is the
crash I am seeing:
(gdb) bt
(gdb)
Save the thread data in zebra_router and stop the thread so we don't
accidently do work on shutdown we don't mean to. In this case
it happened in our topotests with some severe system load.
Essentially we happened to kill the zebra daemon just as the
graceful_restart timer popped here.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently under system load tests that use verify_pim_interface_traffic
immediately after a interface down/up event are not giving any time
for pim to receive and process the data from that event. Give
the test some time to gather this data.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Under heavy system load, we are sometimes seeing this
output for addKernelRoute:
2021-11-28 16:17:27,604 INFO: topolog: [DUT: b1]: Running command: [ip route add 224.0.0.13 dev b1-f1-eth0]
2021-11-28 16:17:27,604 DEBUG: topolog.b1: LinuxNamespace(b1): cmd_status("['/bin/bash', '-c', 'ip route add 224.0.0.13 dev b1-f1-eth0']", kwargs: {'encoding': 'utf-8', 'stdout': -1, 'stderr': -2, 'shell': False, 'stdin': None})
2021-11-28 16:17:27,967 DEBUG: topolog.b1: LinuxNamespace(b1): cmd_status("['/bin/bash', '-c', 'ip route']", kwargs: {'encoding': 'utf-8', 'stdout': -1, 'stderr': -2, 'shell': False, 'stdin': None})
2021-11-28 16:17:28,243 DEBUG: topolog: ip route
70.0.0.0/24 dev b1-f1-eth0 proto kernel scope link src 70.0.0.1
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This tells us that the ip route add succeeded but when looking for it
the system failed to immediately find it. Why is this happening?
Probably we are under heavy system load and the two different
commands, 'ip route add..' and 'ip route show' are being executed
on different cpu's and the data has not been copied to the different
cpu yet in the kernel. This is not necessarily something normally
seen but entirely possible. Giving the system a few extra seconds
for the kernel to execute/work the memory barrier system seems
prudent for long term success of our programming.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Modify the timers uses to send updates/hello's every
1 seconds instead of 5. Allowing this test to converge
faster under heavy system load.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
During repeated runs I am seeing this test fail to run successfully.
Upon inspecting the output:
{
"prefix":"10.0.10.0/24",
"prefixLen":24,
"protocol":"isis",
"vrfId":6,
"vrfName":"r1-cust1",
"selected":true,
"destSelected":true,
"distance":115,
"metric":10,
"queued":true,
We can see that the route is still queued. Under heavy system
load and not ensuring that isis has time to send the route to
zebra and for zebra to install the route, this test can fail.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
