There is no need for special casing of mac addresses,
since the mac address is it's own type integrated
into `struct prefix` now.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Added support to create mac filters
2. Enabled route-map commands for EVPN address family
3. Provision to add mac filters under match clause in route-maps
Ticket: CM-16349
Review: CCR-6190
Unit-test: Manual (logs attached to ticket)
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The defines:
ONE_DAY_SECOND
ONE_WEEK_SECOND
ONE_YEAR_SECOND
were being defined all over the system, move the
define to a central location.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This adds "@tcp" as new choice on the -z option present in zebra and the
protocol daemons. The --enable-tcp-zebra option on configure is no
longer needed, both UNIX and TCP socket support is always available.
Note that @tcp should not be used by default (e.g. in an init script),
and --enable-tcp-zebra should never have been in any distro package
builds, because
**** TCP-ZEBRA IS A SECURITY PROBLEM ****
It allows arbitrary local users to mess with the routing table and
inject bogus data -- and also ZAPI is not designed to be robust against
attacks.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Behind END_TKN, there is another graph node whose data pointer is
actually struct cmd_element instead of struct cmd_token. Don't try to
interpret that as cmd_token. This causes very interesting crashes when
ASLR decides to give one of the strings of a command definition a lower
32-bit value that is a valid cmd_token_type (e.g. FORK_TKN).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Multi-Instance OSPF configuration CLI would fail because
first client return error upon seeing qobj_index being 0.
With new marco generate new error code to return from each
instance (vtysh client) and if the command is intended for given
instance, its qobj_index would be nonzero and process the command
and push correct ospf context. Other instance would return the error.
On vtysh end, check all instance return an error log a message to a
file.
Testing Done:
Verfied various MI-OSPF configuration CLI with multi instances.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
From discussion we decided that we should use ETH_ALEN instead
of ETHER_ADDR_LEN. Add ETH_ALEN to prefix.h and make
ETHER_ADDR_LEN generate a warning when used( but still work ).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since we were only setting vty->wfd in config_write, vty->fd would
remain 0 and vty_close() wouldn't close vty->wfd.
Clean up the entire fd closing and make it more explicit. We were even
trying to write to stdin...
Reported-by: Jorge Boncompte <jbonor@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
BUILT_SOURCES doesn't do what the name suggests. What it actually means
is "these files should be built first when doing a 'make' without
explicit target" (or "make all").
It's pretty much almost always wrong to use BUILT_SOURCES, the only
correct use is when a file is needed by an unspecified / large set of
files.
Also remove version.h and route_types.h from dist tarball while we're at
it. configure will create them anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Oops, forgot this path... in the --terminal case, stdio is closed when
the user ends the terminal session, but without terminal it was left
open.
(This caused a ssh session hang in the CentOS6 CI because the file
descriptors were still open, so ssh would keep the session alive...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Now that the logging hole is plugged, we can just print config-loading
errors to the log. This has 2 hidden advantages:
- vty_read_config calls in SIGHUP don't print errors to /dev/null
- errors are consistently printed to syslog on --enable-cumulus
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
zlog_* doesn't work in startup before we've loaded the real logging
configuration. Add some code to log to stderr for that window of time.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If the paths for pid or vty don't exist, try creating them. Failure is
ignored (on EEXIST) or prints a non-fatal warning (other errors).
Fixes: #507
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This splits off privs_preinit(), which does the lookups for user and
group IDs. This is so the init code can create state directories while
still running as root.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The OpenBSD's cp(1) command doesn't support the -v option. This will
change in the next releases (starting from v6.2) but this patch fixes
the problem for v6.1 and older releases.
Fixes Issue #875.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
- SIGTSTP appropriately suspends the foreground terminal
- SIGINT causes the daemon to exit, regardless of -d
- SIGQUIT causes the daemon to daemonize, regardless of -d
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Block the parent process until the child has reached the main loop, e.g.
full service is available.
This means it's no longer neccessary to add a "safety sleep" for daemon
cross-dependencies, when using the -d startup option. This doesn't help
if -d isn't used.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Linux -> TCP_CORK is enabled by default
*BSD -> The equivalent is TCP_NOPUSH
As such sockopt_cork is effectively useless
especially since the two places it is used
do it right before TCP writes then disable
it right after the writes are over.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch statements are more elegant (and potentially faster... but that's
not the main motivation).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
SAFI values have been a major source of confusion over the last few
years. That's because each SAFI needs to be represented in two different
ways:
* IANA's value used to send/receive packets over the network;
* Internal value used for array indexing.
In the second case, defining reserved values makes no sense because we
don't want to index SAFIs that simply don't exist. The sole purpose of
the internal SAFI values is to remove the gaps we have among the IANA
values, which would represent wasted memory in C arrays. With that said,
remove these reserved SAFIs to avoid further confusion in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
swpX peers all start out with the same sockunion so initially they all
go into the same hash bucket. Once IPv6 ND has worked its magic they
will have different sockunions and will go in different buckets...life
is good.
Until then though, we are in a phase where all swpX peers have the same
socknunion. Once we have HASH_THRESHOLD (10) swpX peers and call
hash_get for a new swpX peer the hash code calls hash_expand(). This
happens because there are more than HASH_THRESHOLD entries in a single
bucket so the logic is "expand the hash to spread things out"...in our
case expanding doesn't spread out the swpX peers because all of their
sockunions are the same.
I looked at having peer_hash_make and peer_hash_same consider the ifname
of the swpX peer but that is a large change that we don't want to make
at the moment. So the fix is to put a cap on how large we are
willing to let the hash table get. By default there is no limit but if
max_size is set we will not allow the hash to expand above that.
Adds an array of descriptive names for each CLI node, plus a runtime
check to make sure folks don't forget to update it.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Commit 8f942af90 introduced a bug while silencing a clang warning. Silence
the warning in a different way to fix our red-black tree implementation.
Fixes#841.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We should preserve the original indentation to make it easier to keep
these files in sync with the upstream.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The pimregX devices when created by the kernel are put into
the default vrf. When pim gets the callback that the device
exists, check to see if it is a pimregX device and if so
move it into the appropriate vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Before the fix NHT had each path resolving via swp1
cel-redxp-10# show ip route 20.0.11.253
Routing entry for 20.0.11.0/24
Known via "bgp", distance 20, metric 0, best
Last update 00:00:20 ago
* 169.254.0.1, via swp1
* 169.254.0.17, via swp2
cel-redxp-10#
cel-redxp-10# show ip nht
[snip]
20.0.11.253
resolved via bgp
via 169.254.0.1, swp1
via 169.254.0.1, swp1
Client list: pim(fd 19)
After the fix
cel-redxp-10# show ip nht
[snip]
20.0.11.253
resolved via bgp
via 169.254.0.1, swp1
via 169.254.0.17, swp2
Client list: pim(fd 19)
A {foo|bar|baz} graph node will have more than 1/2 incoming links even
if no other references are left to it (which is what the assert was
previously trying to ensure.)
I don't see a good way to "fix" the assert so I'm just removing it.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The label initializer & nhrpd variable are just to shut up GCC 7,
the other two are actual bugs.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Instead of having an ?: expression embedded in every single caller of
vty_out, just expand \n to \r\n in the vty code if neccessary.
(Deprecation warnings will be enabled in the next commits which will do
the search-and-replace over the codebase.)
[This reverts commit 4d5f445 "lib: add vty_outln()"]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Pretty-prints variable autocompletions by breaking them up into multiple
lines, indenting them consistently and respecting the column width of
the terminal.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Implement configuration options for EVPN. The configuration options include
VNI configuration with RD and Import and Export Route Targets. Also, display
the EVPN configuration.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Implement handling of MACs and Neighbors (ARP/ND entries) in zebra:
- MAC and Neighbor database handlers
- Read MACs and Neighbors from the kernel, when needed and create
entries in zebra's MAC and Neighbor databases.
- Handle add/update/delete notifications from the kernel for MACs and
Neighbors and update zebra's database appropriately
- Inform locally learnt MACs and Neighbors to client
- Handle MACIP add/delete from client and install appriporiate entries
into the kernel
- Since Neighbor entries will be installed on an SVI, implement the
needed mappings
NOTE: kernel interface is only implemented for Linux/netlink
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement fundamental handling for VNIs and VTEPs:
- Handle EVPN enable/disable by client (advertise-all-vni)
- Create/update/delete VNIs based on VxLAN interface events and inform
client
- Handle VTEP add/delete from client and install into kernel
- New debug command for VxLAN/EVPN
- kernel interface (Linux/netlink only)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some platforms don't support 64-bit atomics, missed converting a
floating point pow() to an integral mul when changing SD algo.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Restoring some code that was unintentionally removed when we were
migrating to Quentin's parser.
This shows up as still reachable allocation on exit, which is somewhat
misleading. Note this only affects --enable-dev-build.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
"$(top_srcdir)" is not on the include path, but "$(top_srcdir)/lib" is.
This is relevant when building with a separate build directory.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
hash_cmd_init will overwrite _hashes with a new list, while _hashes
already has been initialised from cmd_init(), thread_master_create(), or
any other function that may have created a hash.
Found while valgrind'ing ospf6d/test_lsdb.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Most read accesses of route_table are actually exact matches where
walking down the tree is wildly inefficient. Use a parallel hash
structure instead.
This significantly speeds up processes that are performance-bound by
table accesses, e.g. BGP withdraw processing. In other locations, the
improvement is not seen as strongly, e.g. when filter processing is the
limiting factor.
[includes fix to ignore prefix host bits in hash comparison]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
route_node->parent and route_node->link shouldn't be touched by user
code since that is a recipe for trouble once we have a hash table in
parallel.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This allows passing struct prefix_{ipv4,ipv6,evpn} * in addition to
struct prefix * without an extra cast (since the union uses the gcc
transparent-union extension present in all compilers that we support.)
Also applies some "const" while we're at it.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Consuming va_args modifies its internal bits, hence the need to copy
it... but the copying wasn't quite right just yet.
Fixes: 4d5f445 ("lib: add vty_outln()")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
NetBSD can't take the square root of a long double
and we should be fine just using a double here anyway
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Adds the ability to name hash tables, and a new cli command that will
show various summary statistics for named hash tables.
Statistics computed are
- load factor
- full load factor (see comments)
- stddev of full load factor
Standard deviation is computed by storing the sum of squares of bucket
lengths. This is somewhat susceptible to overflow. On platforms where a
double is 32 bits, placing 65535 or more elements into a hash table
opens up the potential for overflow, depending on how they are arranged
in buckets (which depends on the hash function). For example, placing
65535 elements into one hash bucket would cause ssq overflow, but
distributing 40000000 elements evenly among 400000 buckets (100 elements
per bucket) would not.
These cases are extremely degenerate, so the vague possibility of
overflow in an informational command is deemed an acceptable tradeoff
for constant time calculation of variance without locks or compromising
efficiency of actual table operations.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Adds a function that calculates various statistics on our implementation
of a hash table. These are useful for evaluating performance.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Fix bad format specifier in thread.[ch]
* Move PRINTF_ATTRIBUTE macro to zebra.h
* Use PRINTF_ATTRIBUTE on termtable printers
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add support for naming pthreads. Also, note that we don't have any
records yet if that's the case.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This patch fixes up show thread commands so that they know about
and operate on all extant thread_masters, since we can now have multiple
running in any given application.
This change also eliminates a heap use after free that appears when
using a single cpu_record shared among multiple threads. Since struct
thread's have pointers to bits of memory that are freed when the global
statistics hash table is freed, later accesses are invalid. By moving
the stats hash to be unique to each thread_master this problem is
sidestepped.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
json-c does not (yet) offer support for unsigned integer types, and
furthermore, the docs state that all integers are stored internally as
64-bit. So there's never a case in which we would want to limit,
implicitly or otherwise, the range of an integer when adding it to a
json object.
Among other things this fixes the display of ASN values greater than
(1/2) * (2^32 - 1)
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The if_update function was taking the interface name as
input and reapplying it, using strncpy to reapply the name.
This has several issues. strncpy should not be used
to copy memory in place. The second issue is that
the interface name is not actually changing when we
update interface to be in the new vrf.
Since every usage of if_update was just reapplying the same
name the interface actually had, just remove that part of
the function and rename it to if_update_to_new_vrf
to represent what it is actually doing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Issue reported that a configuration commonly used on other routing implementations
fails in frr. If under ospf, "network 172.16.1.1/32 area 0" or under eigrp, "network
172.16.1.1/32" is entered, the appropriate interfaces are not included in the routing
protocol. This was because the code was calling prefix_match, which did not match if
the network statement had a longer mask than the interface being matched. This fix
takes away that restriction by creating a "lib/prefix_match_network_statement" function
which doesn't care about the mask of the interface. Manual testing shows both ospf and
eigrp now can be defined with more specific network statements.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
When vtysh sends 'exit' to a daemon, we set the vty->status to
VTY_CLOSE but never actually close the connection. Lovely.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
ospf redefines the standard route map commands which causes ambiguity
issues in the CLI parser, it also uses a signed integer to hold an
unsigned quantity leading to weirdness when specifying metrics larger
than 2,147,483,647
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
indicate which daemon was the source of the message and that it may be a
question of daemon support rather than a malformed argument
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
So the *bsd implementations of RB Tree's for older
platforms use a macro implementation. New platforms
have converted to a function implementation that uses
a different calling parameter list. So when
we attempt to build FRR on older *bsd implementations
the macro's and functions do not interact too well.
As a workaround put the openbsd-tree.h #include
inside of zebra.h at a point before the particular
platforms version is included. Since we use
the same #if guard for the header we should be ok.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Account for the pipe poker in poll() by explicitly returning NULL when
we have no events, timers or file descriptors to work with
* Add a comment explaining exactly what we are doing and why
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Update pollfds copy as well as the original
* Keep array count for copy in thread_master
* Remove last remnants of POLLHUP in .events field
* Remove unused snmpcount (lolwut)
* Improve docs
* Add missing do_thread_cancel() call in thread_cancel_event()
* Change thread_fetch() to always enter poll() to avoid starving i/o
* Remember to free up cancel_req when destroying thread_master
* Fix dereference of null pointer
* Fix dead store to timeval
* Fix missing condition for condition variable :-)
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This patch implements an MT-safe version of thread_cancel() in
thread_cancel_async(). Behavior as follows:
* Cancellation requests are queued into a list
* Cancellation requests made from the same pthread as the thread_master
owner are serviced immediately (thread_cancel())
* Cancellation requests made from a separate pthread are queued and the
call blocks on a condition variable until the owning pthread services
the request, at which point the condition variable is signaled and
execution continues (thread_cancel_async())
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- All ipv4 labeled-unicast routes are now installed in the ipv4 unicast
table. This allows us to do things like take routes from an ipv4
unicast peer, allocate a label for them and TX them to a ipv4
labeled-unicast peer. We can do the opposite where we take routes from
a labeled-unicast peer, remove the label and advertise them to an ipv4
unicast peer.
- Multipath over a labeled route and non-labeled route is not allowed.
- You cannot activate a peer for both 'ipv4 unicast' and 'ipv4
labeled-unicast'
- The 'tag' variable was overloaded for zebra's route tag feature as
well as the mpls label. I added a 'mpls_label_t mpls' variable to
avoid this. This is much cleaner but resulted in touching a lot of
code.
The xml2cli.pl script was useful years ago when the vty code was very
rudimentary. This is not the case anymore, so convert all ldpd CLI
commands to use DEFUNs directly and get rid of the XML interface.
The benefits are:
* Consistency with the other daemons;
* One less build dependency (the LibXML perl module);
* Easier to add new commands.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
'do' is syntax sugar that allows the user to execute a command under
ENABLE_NODE when in another CLI node. If the user is already in
ENABLE_NODE, use of 'do' was previously disallowed. This patch allows it
because it makes it easier for us to hack around certain instances of
the node synchronization problem with vtysh.
Also included is a fix for one of these problems.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Switch the RB tree implementation completely to the new dlg@'s version
that uses pre-declared functions instead of macros for tree functions.
Original e-mail/diff:
https://marc.info/?l=openbsd-tech&m=147087487111068&w=2
Pros:
* Reduces the amount of code that the usage of those macros generate
* Allows the compiler to do a better compile-time check job
* Might have better i-cache utilization since the tree code is shared
Con:
* dlg@ benchmarks shows it has 'very slightly slower' insertions
* imported RB_* code must adapt the following calls:
RB_INIT(), RB_GENERATE(), RB_ROOT(), RB_EMPTY(), make compare
functions use 'const' (if not already) and maybe others.
Adds "DEFPY()" which invokes an additional layer of preprocessing, so
that we get pre-parsed and named function arguments for the CLI.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Wraps the command parsing code for Python, so we can use it to do fancy
preprocessing and replace extract.pl.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Standard define the default SRGB range from 16000 to 23999. This
commit defines these default values for frr.
Ticket: CM-16737
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6347
it's just an alias for a millisecond timer used in exactly nine places
and serves only to complicate
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If fd_poll() is called with no file descriptors, an incorrect check in
the function prelude causes it to return instantly; for a thread that
wishes to poll but has no file descriptors, this results in busy
waiting. Desired behavior is to block.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Allow routing protocols to call one function to add/delete
routes into zebra. Future commits will start adding
this code to individual routing protocols.
Why are we doing this? Well the zapi_ipv[4|6]_route functions
are fundamentally broken in their ability to pass down anything
but NEXTHOP_TYPE_IFINDEX or NEXTHOP_TYPE_IPV[4|6] and we need
the ability to pass down a bit more information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
pim controls the vrf table creation for due to the way that
pim must interact with the kernel. In order to match the
table_id for unicast <-> multicast( not necessary but a
real nice to have ) we need to pass up from zebra the
table_id associated with the vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
a bunch of pollfds can cause a stack overflow when using a stack
allocated buffer...silly me...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When scheduling a task onto a thread master owned by another pthread, we
need to lock the thread master's mutex. However, if the pthread which
owns that thread master is in poll(), we could be stuck waiting for a
very long time. To solve this, we copy all data poll() needs and unlock
during poll(). To break the target pthread out of poll(), thread_master
has gained a pipe whose reading end is passed into poll(). After an event
that requires immediate action by the target pthread, a byte is written
into the pipe in order to wake it up.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
[DL: split off from select() removal]
poll() is present on every supported platform and does not have an upper
limit on file descriptors.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
[DL: split off from AWAKEN() change]
Modify EVPN prefix to use the generic IP address structure. Add support
for EVPN type-2 and type-3 prefix dump. Fix references to modified fields
as needed.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Define an IP address structure which is a union of an IPv4 and IPv6
address. This is for subsequent use in EVPN.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Added APIs to:
a) pre-assign 0th bit in the bitfield
b) free 0th bit in the bitfield
c) free the allocated bitfield data
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
incorrect array sizes causing out of bounds read and potentially
incorrect capability settings
introduced in 1b322039
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Allow some more flexibility in case callers wish to manage their own
thread pointers and don't require or don't want the thread to keep a
back reference to its holding pointer.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
