The error handling of the nexthop vrf and the vrf
for what was specified on the cli was not as clean
as it should have been.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The nexthop_vrf should be looked up as appropriate,
If the nexthop_vrf was specified use that, else
use the vrf context of what was passed in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bestpath multipath-relax setting was added to the output of
"show ip bgp neighbor json" several months ago but this is not
the correct place to display that information and this fix removes
it from there. The multipath-relax setting was also added
to the output of "show ip bgp sum json" which is fine.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The code change to switch from stream_getX to STREAM_GETX added
a goto statement to be handled for a failure case. The failure
case was properly handled but the normal case was not tested
properly and there exists a situation where we would free
the out_ctxt 2 times. Prevent that from happening.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Call Route-map, prefix-list clean up routines and
vrf clearnup during ospf daemon exit routine.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The dest->selected_fib assignment needs to happen
after the install and should be controlled by
the southbound api return of success or failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If a peer already has keepalives turned on when asking to turn them on,
return immediately. Same thing for turning them off.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Use the new threading facilities provided in lib/ to streamline the
threads used in bgpd. In particular, all of the lifecycle code has been
removed from the I/O thread and replaced with the default loop. Did not
do the same to the keepalives thread as it is much smaller (doesn't need
the event system).
Also cleaned up some comments to match the style guide.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Some work on FRR's pthread wrapper.
* Provide a built-in way to synchronize thread startup
* Make utility functions take frr_pthread * instead of its integer ID
* Pass frr_pthread * as pthread start function argument
* Correct some comment styling
* Rename some variables to match naming conventions in the file
* Change parameter ordering in stop function prototype to follow the
convention in the other functions
* Default new frr_pthreads to using a vanilla event loop
For the last point, the original goal when designing the implementation
of pthreads into FRR was to be able to use the thread.c event based
system inside pthreads. This code essentially encapuslates all the
thread.c functionality into an easy to use pthread out of the box.
Creating a new frr_pthread with a null attributes field will cause the
created frr_pthread to run a thread.c event loop. The upshot of this is
that it is now possible to safely run existing functions in a pthread in
roughly 3 lines of code. It also serves as an example / starting point
for others.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The route_node that we are working on is going to be interesting
to the kernel_route_rib_pass_fail. So I am setting up the
code to allow me to pass it. This will be done in a subsuquent
commit.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If a BGP message header fails validation we send a BGP NOTIFICATION from
the I/O thread. At this time we clear the output buffer, push a
NOTIFICATION and then call the manual write function for errors. But in
between the push and the write the main thread could have pushed some
other message. Thus we need to hold the lock for the duration of the
function. TOCTTOU.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Issue 1652 was related to OSPF Crash on termination when ospf is
configured to flood self Opaque LSA e.g TE or RI Opaque LSA.
Analysis:
The problem resides in free_opaque_info_per_type() line 576 of
ospf_opaque.c. Once LSA flush, the function removes by calling
listnode_delete() function the opaque_info_per_type data structure.
However, this is also performed at the upper level function
ospf_opaque_type10lsa_term() which call list_delete_and_null() function.
This result into a double free pointer exception.
Solution:
Remove call to listnode_delete() calls in free_opaque_info_per_type()
function as it is done by list_delete_and_null(). Delete lines 592 - 615.
Remove also second call to ospf_opaque_type10lsa_term() in ospfd.c line 848.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
An OSPFv3 enabled Router can originate or receive
multiple Link State-IDs for Router LSAs.
As per RFC 5340 A 4.3, more than one Router LSAs,
from given Vertex is considered (as concatenated)
single large Router LSA.
Created hidden show command to simulate concatenated
large LSA from advertising/self Router LSAs.
Ticket:CM-19329
Reviewed By:
Testing Done:
Simulate 160 subinterfaces between R1 === R2--R3,
This triggers R1 and R2 to generate multiple link state
IDs for Router LSAs. During SPF calculation only aggregated
single router LSA processed and SPF tree formed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Abstract the code that sends the zapi message into zebra
for the turn on/off of nexthop tracking for a prefix.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
zclient_init sets the redist_default to the appropriate
value, testing it with an assert doesn't really provide
us with much of anything useful.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zclient->redist bitmap for vrf's was being set again
for the zclient_send_dereg_requests function. This should
be a unset on tear down.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a nexthop is resolved via a label based nexthop, copy
the labels into the newly created recursive nexthop.
Please note that this does not fix the case where we
have a label based nexthop that is recursively resolved
through *another* nexthop that is also label based.
In this case we need to create a new label stack
for those routes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The function zserv_create_header was exactly the same
as zclient_create_header. Let's just have one in the
system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On some places, macro NS_DEFAULT was not used. This commit is replacind
on some identified places where 0 can be replaced with NS_DEFAULT macro.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
On some places of code, the VRF_DEFAULT define was not used. This commit
is ensuring that the macros is well used.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The VRF_DEFAULT parameter is incorrectly used. The 0 value for the bgp
instance is passed instead.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
fixup bgpd: fix compilation issue with bgpd
Because the VRF_ID is mapped into 32 bit, and because when NETNS will be
the backend of VRF, then the NS identifier must also be encoded as 32
bit.
Also, the NS_UNKNOWN value is changed accordingly to UINT32_MAX.
Also, the NS_UNKNOWN and NS_DEFAULT values are removed from zebra_ns.h
and kept on ns.h header file.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
