Problem Statement:
=================
This commit is to add document support for OSPF6 authentication
trailer feature, which is adding support for RFC7166.
RCA:
====
NA
Fix:
====
To add detailed description for feature support.
This document caputres
Configuration CLI
Show commands
Debug commands
Clear command
That are added as part of the feature with examples.
Risk:
=====
Low
Tests Executed:
===============
NA
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
`show ip pim assert` shows S,G ifchannel information even when
there is no information available about the assert process.
Fix the code to not dump non-interesting cases.
Fixes: 10462
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
While going through the doc, found some commands are missing in the doc.
Also correcting few mistakes.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
New Constaint Shortest Path First algorithm has been introduce in FRR library.
Add a new 'show sharp cspf' command as example of how to use these
CSPF algorithm.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
As helper function of Segment Routing Flex Algo or RSVP-TE
add Constrained Shortest Path First algorithm able to compute
path with constraints. Supported constraints are as follow:
- Standard IGP metric
- TE IGP metric
- Delay metric
- Bandwidth for given Class of Service for bandwidth reservation (RSVP-TE)
Usage of CSPF algorithms is detailed in the doc/developer/cspf.rst file
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Opaque data takes up a lot of memory when there are a lot of routes on
the box. Given that this is just a cosmetic info, I propose to disable
it by default to not shock people who start using FRR for the first time
or upgrades from an old version.
Fixes#10101.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Here "new" is very puzzling. If new parameters with default values on peer
configuration node are set, they will not be used yet.
So just clarify it:
Only "non-default" values on peer configuration node are set, they can override
the conrresponding values from profile.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Instead of referring to the draft of IP Prefix Advertisement in
Ethernet VPN let's point to the recently published RFC9136.
Signed-off-by: Marlin Cremers <marlin@cbws.nl>
Adding an `s` after these printfrr specifiers replaces 0.0.0.0 / :: in
the output with a star (`*`). This is primarily intended for use with
multicast, e.g. to print `(*,G)`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since this is only used in very few places, moving it out of the way is
reasonable. (`%pSG` will be pim_sgaddr)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Added the High Level design for implementing MLD and PIMv6.
Added a PPT as well in case someone wants to translate it
to some other language.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
On lower CPU with lots of static routes, it will cost more than 2
minutes.
2 minutes is the default timeout value, we can adjust it by configure:
./configure --with-service-timeout=<digit>
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Using with LLGR, this should be allowed setting GR restart-time timer to 0,
to immediately start LLGR timers.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
rfc7196 recommends:
In addition, BGP implementations have an internal constant, which we
will call the 'maximum penalty', and the current computed penalty may
not exceed it.
Router Maximum Penalty: The internal constant for the maximum
penalty value MUST be raised to at least 50,000.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The following subcodes are defined for the Cease NOTIFICATION
message:
Subcode Symbolic Name
1 Maximum Number of Prefixes Reached
2 Administrative Shutdown
3 Peer De-configured
4 Administrative Reset
5 Connection Rejected
6 Other Configuration Change
7 Connection Collision Resolution
8 Out of Resources
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Updating babel default configuration parameters rtt-min and
max-rtt-penalty according to the actual implementation.
Signed-off-by: Adriano Marto Reis <adrianomarto@gmail.com>
Currently, it is possible to rename the default VRF either by passing
`-o` option to zebra or by creating a file in `/var/run/netns` and
binding it to `/proc/self/ns/net`.
In both cases, only zebra knows about the rename and other daemons learn
about it only after they connect to zebra. This is a problem, because
daemons may read their config before they connect to zebra. To handle
this rename after the config is read, we have some special code in every
single daemon, which is not very bad but not desirable in my opinion.
But things are getting worse when we need to handle this in northbound
layer as we have to manually rewrite the config nodes. This approach is
already hacky, but still works as every daemon handles its own NB
structures. But it is completely incompatible with the central
management daemon architecture we are aiming for, as mgmtd doesn't even
have a connection with zebra to learn from it. And it shouldn't have it,
because operational state changes should never affect configuration.
To solve the problem and simplify the code, I propose to expand the `-o`
option to all daemons. By using the startup option, we let daemons know
about the rename before they read their configs so we don't need any
special code to deal with it. There's an easy way to pass the option to
all daemons by using `frr_global_options` variable.
Unfortunately, the second way of renaming by creating a file in
`/var/run/netns` is incompatible with the new mgmtd architecture.
Theoretically, we could force daemons to read their configs only after
they connect to zebra, but it means adding even more code to handle a
very specific use-case. And anyway this won't work for mgmtd as it
doesn't have a connection with zebra. So I had to remove this option.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Problem:
=======
Generate query once cli is generating IGMPv2 report for IGMPv3 enabled interface
Description:
===========
If the version is not specified in the cli, it was taking version 2 as default
Fix:
===
If the version is not specified in the cli along with ip igmp generate-query-once,
the default will be the version enabled on that interface.
Signed-off-by: nsaigomathi <nsaigomathi@vmware.com>
This utility script helps in generated formatted and consistent
change log including:
1- group logs per daemon
2- standarize daemon names (lowercase, end with d)
3- capitalize all log lines
4- no merge commits
caveat: comments are assumed to be in the form
daemon-name : message
Sample Output:
```
sharpd
Follow the practice on cli design for json output
Install route supports nexthop-seg6 (step3)
Install_routes_helper support zapi_route flags (step1)
snapcraft
Add missing dependency
Add pathd to frr snap daemons
Change base to ubuntu 18.04 and libyang 2.0.7
staticd
Convert typedef to enum
Fix distance processing
Fix late initialization of blackhole type
Output config using nb callbacks instead of operational data
```
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Add Link State TED features to isis_te.c and new CLI to export LS TED and
show LS TED to IS-IS.
IS-IS LSPs are parse each time a new LSP event occurs in order to update
accordingly the Link State Traffic Engineering Database. LS TED could be
exported through the ZAPI Opaque message (see sharpd as example).
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
- Add advertisement of Global IPv6 address in IIH pdu
- Add new CLI to set IPv6 Router ID
- Add advertisement of IPv6 Router ID
- Correctly advertise IPv6 local and neighbor addresses in Extended IS and MT
Reachability TLVs
- Correct output of Neighbor IPv6 address in 'show isis database detail'
- Manage IPv6 addresses advertisement and corresponiding Adjacency SID when
IS-IS is not using Multi-Topology by introducing a new ISIS_MT_DISABLE
value for mtid (== 4096 i.e. first reserved flag set to 1)
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Move the "longer-prefixes" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "route-map" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "filter-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "prefix-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "community-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For IPv4 matching, we have "match ip next-hop address A.B.C.D".
For IPv6 matching, we have "match ipv6 next-hop X:X::X:X".
To have consistency, let's add "address" keyword to IPv6 commands.
Old commands are preserved as hidden for backward compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There was a historical blurb at the top of the process architecture
document that in several instances caused some confusion regarding
whether or not FRR supports multithreading. Remove this paragraph and
replace it with a summary of the page contents.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
It's strictly optional, but… the backtraces are really much better.
Specifically, `libunwind` is notably more capable in figuring out
function names compared to glibc/libexecinfo `backtrace_symbols()`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* Separate process into stages; stage 1 is preparation, stage 2 is
staging, stage 3 is publishing
* Reorder some steps
* Remove some steps
* Elaborate on some steps
* Add some steps
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Clarify process for editing changelog and updating the configure.ac
project version, as well as procedure for doing sanity testing prior to
creating the release tag.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
The `neighbor <peer> version <X>` command does not
exist. I am unable to find it going back to version
2.0 of FRR. So this command has been not in the system
for a very long time.
In any event bgp already supports version 4 of bgp and
it auto-negotiates this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Sphinx tries to parse :c:function: as function prototype, which doesn't
quite work with macros.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Sphinx warns about a few nits here, just fix. (Note :option:`-E` can't
be used without a "option:: -E" definition, it's intended as a cross
reference.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
We have `frr-X.Y-dev` tags on master after pulling stable branches,
otherwise the `gitversion` tooling / `--with-pkg-git-version` gets
_very_ confused (it'll print something like:
```
FRRouting 8.2-dev-g210a75e65dad (areia).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
This is a git build of frr-8.1-rc1-8-g210a75e65dad
```
(Note the conflicting version numbers.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add the ability to specify the router-id/area-id when deleting the debug
ospf6 configuration.
The new commands are as follow:
no debug ospf6 border-routers router-id [A.B.C.D]
no debug ospf6 border-routers area-id [A.B.C.D]
Update the doc as well.
Signed-off-by: Ahmad Caracalli <ahmad.caracalli@6wind.com>
Implement NSSA address ranges as specified by RFC 3101:
NSSA border routers may be configured with Type-7 address ranges.
Each Type-7 address range is defined as an [address,mask] pair. Many
separate Type-7 networks may fall into a single Type-7 address range,
just as a subnetted network is composed of many separate subnets.
NSSA border routers may aggregate Type-7 routes by advertising a
single Type-5 LSA for each Type-7 address range. The Type-5 LSA
resulting from a Type-7 address range match will be distributed to
all Type-5 capable areas.
Syntax:
area A.B.C.D nssa range X:X::X:X/M [<not-advertise|cost (0-16777215)>]
Example:
router ospf6
ospf6 router-id 1.1.1.1
area 1 nssa
area 1 nssa range 2001:db8:1000::/64
area 1 nssa range 2001:db8:2000::/64
!
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Extend the pathd documentation with more configuration examples, more
detailed and some graphics to help understand what pathd supports.
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Since there's very few locations where the `frr-format` actually prints
false positive warnings, consensus seems to be to just work around the
false positives even if the code is correct.
In fact, there is only one pattern of false positives currently, in
`bfdd/dplane.c` which does `vty_out("%"PRIu64, (uint64_t)be64toh(...))`.
The workaround/fix for this is a replacement `be64toh` whose type is
always `uint64_t` regardless of what OS we're on, making the cast
unnecessary.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The typesafe containers have been around for quite a while now and
haven't gone up in a blaze of flames, so let's add a "strong
recommendation" to use them for new code and refactors.
For the nhrpd custom lists I'm already working to remove them; meanwhile
the old skiplists are primarily used in RFAPI (4 users outside of that),
so those could be next.
What remains are the old `list_*` and `hash_*`, which have >300 and >100
users respectively, making them a much harder problem to tackle. And
the new hash implementation doesn't have the same level of
debug/introspection yet (it's on my TODO.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add the "default-information-originate" option to the "area X nssa"
command. That option allows the origination of Type-7 default routes
on NSSA ABRs and ASBRs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Considering that both the GR helper mode and restarting mode can be
enabled at the same time, the "graceful-restart helper-only" command
can be a bit misleading since it implies that only the helper mode
is enabled. Rename the command to "graceful-restart helper enable"
to clarify what the command does.
Start a deprecation cycle of one year before removing the original
command
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Because vrf backend may be based on namespaces, each vrf can
use in the [16-(2^32-1)] range table identifier for daemons that
request it. Extend the table manager to be hosted by vrf.
That possibility is disabled in the case the vrf backend is vrflite.
In that case, all vrf context use the same table manager instance.
Add a configuration command to be able to configure the wished
range of tables to use. This is a solution that permits to give
chunks to bgp daemon when it works with bgp flowspec entries and
wants to use specific iptables that do not override vrf tables.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Considering that both the GR helper mode and restarting mode can be
enabled at the same time, the "graceful-restart helper-only" command
can be a bit misleading since it implies that only the helper mode
is enabled. Rename the command to "graceful-restart helper enable"
to clarify what the command does.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
