The prefix of routes to border routers consists of two pieces of
information embedded in a single struct (prefix.u.lp):
struct prefix {
uint8_t family;
uint16_t prefixlen;
union {
[snip]
struct {
struct in_addr id;
struct in_addr adv_router;
} lp;
} u __attribute__((aligned(8)));
};
As such, using prefix2str() (or the %pFX format specifier) isn't
correct when logging such routes.
This commit adds a few special cases here and there to handle
OSPF6_DEST_TYPE_ROUTER routes differently. It'd probably be a good
idea to add a helper function to handle all cases in a single place,
but that can be left for a second moment.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Problem :
=======
When all the groups from Ixia are stopped,
groups still keep refreshing and not getting timeout
RCA:
====
IGMP Report is coming in include mode without any source address, this problem will come.
Fix :
===
If the requested filter mode is INCLUDE *and* the requested
source list is empty, then the entry corresponding to the
requested interface and multicast address is deleted if present.
If no such entry is present, the request is ignored.
When an interface receives the IGMP report without any source, then the group is deleted.
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Also, update the ospf6_topo2 topotest since the expected output
was wrong. With this fix, NSSA routes will be created on r2
("redistribute connected"), and NSSA routes appear in the routing
table as regular external routes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Once NSSA is unconfigured on an area, all self-originated Type-7
LSAs need to be flushed. The existing code was iterating over the
LSDB in the wrong way, causing ospf6_nssa_flush_area() to flush
LSAs of all types. Use the ALL_LSDB_TYPED_ADVRTR macro to perform
the intended iteration correctly.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Once NSSA is unconfigured, the OSPF area should still be operational
as a normal area instead of being deleted.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RFC 3101 - Section 2.1 says:
"(..) Interfaces associated with an NSSA will not send or receive
Type-5 LSAs on that interface but may send and receive Type-7 LSAs.
Therefore, if the N-bit is set in the options field, the E-bit must
be clear."
If the E-bit isn't cleared on an NSSA ABR, that will cause hello
packets to be dropped (due to parameters mismatch), which will
prevent the ABR from forming adjacencies with others routers in
the NSSA area.
This problem didn't affect the existing NSSA topotest by chance
of luck. In that topotest, in the NSSA ABR, the NSSA area is
configured before any interface is associated to it. That caused
ospf6_check_and_set_router_abr() to return false, leading to
the unsetting of the E-bit. With this fix, the order in which
areas/interfaces are configured shouldn't matter because the E-bit
will always be unset on NSSA areas.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
OSPF mixes uses of "delete" and "del_action" depending on which library
function is called. It's a bug-prone mess that needs fixing; however, for
now we fix the one obvious incorrect use in this test.
Signed-off-by: Christian Hopps <chopps@labn.net>
Problem Statement:
==================
Everytime redistribute CLI is executed, external LSAs are
re-originated. When there is no change in the CLI parameters
the LSAs should not get re-originated.
Fix:
=================
Check if the CLI params are same, do not re-originate the LSA.
Fixes: #9445
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
The lsa and lsanext must be unlocked if break out of ALL_LSDB loop.
Incidentally correct the comment of ALL_LSDB.
Signed-off-by: anlan_cs <anlan_cs@tom.com>
In particular, the fixed 2 second sleep here was not long enough.
Switch to standard run_and_expect polling to make test more robust.
Signed-off-by: Christian Hopps <chopps@labn.net>
- In order to run tests in parallel the netns-based vrfs need to
have unique names primarily bc they are all tracked/looked-up in
`/run/netns` which is not network namespace nesting friendly
- use ip(8) exclusively rather than a mix of `ip` and `ifconfig`
and `vconfig`, reducing required pkg count by a couple.
Signed-off-by: Christian Hopps <chopps@labn.net>
- bugs in the support library function `verify_gr_address_family`
allowed this test to pass depending on ordering of python dictinoary
keys. Fix the bugs, fix the test.
Signed-off-by: Christian Hopps <chopps@labn.net>
