Multi instance ospf support was broken due to PR #4564.
Adding fix back and extra checks to support multi instance
OSPF.
Fixes issues #5343 & #5741
Signed-off-by: Santosh P K <sapk@vmware.com>
The vrrpd one conflicts with the standalone vrrpd package; also we're
installing daemons to /usr/lib/frr on some systems so they're not on
PATH.
Signed-off-by: David Lamparter <equinox@diac24.net>
Address Sanitizer is reporting this issue:
==26177==ERROR: AddressSanitizer: heap-use-after-free on address 0x6120000238d8 at pc 0x7f88f7c4fa93 bp 0x7fff9a641830 sp 0x7fff9a641820
READ of size 8 at 0x6120000238d8 thread T0
#0 0x7f88f7c4fa92 in if_delete lib/if.c:290
#1 0x42192e in ospf_vl_if_delete ospfd/ospf_interface.c:912
#2 0x42192e in ospf_vl_delete ospfd/ospf_interface.c:990
#3 0x4a6208 in no_ospf_area_vlink ospfd/ospf_vty.c:1227
#4 0x7f88f7c1553d in cmd_execute_command_real lib/command.c:1073
#5 0x7f88f7c19b1e in cmd_execute_command lib/command.c:1132
#6 0x7f88f7c19e8e in cmd_execute lib/command.c:1288
#7 0x7f88f7cd7523 in vty_command lib/vty.c:516
#8 0x7f88f7cd79ff in vty_execute lib/vty.c:1285
#9 0x7f88f7cde4f9 in vtysh_read lib/vty.c:2119
#10 0x7f88f7ccb845 in thread_call lib/thread.c:1549
#11 0x7f88f7c5d6a7 in frr_run lib/libfrr.c:1093
#12 0x412976 in main ospfd/ospf_main.c:221
#13 0x7f88f73b082f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
#14 0x413c78 in _start (/usr/local/master/sbin/ospfd+0x413c78)
Effectively we are in a shutdown phase and as part of shutdown we delete the
ospf interface pointer ( ifp->info ). The interface deletion code
was modified in the past year to pass in the address of operator
to allow us to NULL out the holding pointer. The catch here
is that we free the oi and then delete the interface passing
in the address of the oi->ifp pointer, causing a use after free.
Fixes: #5555
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We actually don't validate the IHL field, although it certainly looks
like we do at a casual glance.
This patch saves us from an assert in case we actually do get an IP
packet with an incorrect header length field.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Some preprocessor constants converted to enums to make the names usable
in the preprocessor.
v2: better isolation between core and vty code to make future northbound
conversion easier.
Signed-off-by: David Lamparter <equinox@diac24.net>
Well, "obviously" this condition block is pointless, since
ospf_router_id_update is called afterwards unconditionally...
(And even if it were needed, it would need to go in ospf_get too.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Commit: ddbf3e6060
This commit modified the interface up handling code in
ZAPI such that the zclient handled the decoding for you.
Prior to this commit ospf assumed that it could use the
old ifp pointer to know state before reading the stream.
This lead to a situation where ospf would `smartly` track
and do the right thing in this situation. This commit
changed this assumption and in certain scenarios, say
a interface was changed after it was already up would
lead to situations where ospf would not properly handle
the new interface up.
Modify ospf to track data that is important to it in
it's interface->info pointer.
This code pattern was followed in both eigrp and pim.
In eigrp's case it was just behaving weirdly in any event
so fixing this pattern is not a big deal. In pim's
case it was not properly using this so it's a no-op
to fix.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We are only saving 20 bytes of string output for ospf neighbor
commands. Fixed output:
act-7326-05# show ip ospf vrf vrf1012 neighbor all
VRF Name: vrf1012
Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL
9.9.12.11 1 Full/DROther 39.973s 200.254.2.10 swp49s0.2:200.254.2.9 4 0 0
9.9.12.12 1 Full/DROther 39.995s 200.254.2.14 swp49s1.2:200.254.2.13 9 0 0
9.9.12.13 1 Exchange/DROthe 39.981s 200.254.2.18 swp49s2.2:200.254.2.17 157 0 0
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We test nbr->oi in a couple of places for null, but
in the majority of places of the nbr->oi data is being
used we just access it. Touch up code to trust this
assertion and make the code more consistent in others.
Found in Coverity.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The indentation level for ospf_read was starting to be pretty
extremene. Rework into 2 functions for improved readability.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Read in up to 20(ospf write-multipler X) packets, for handling of data.
This improves performance because we allow ospf to have a bit more data
to work on in one go for spf calculations instead of 1 packet at a time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Turning on packet debugs and seeing a header dump that is 11
lines long is useless
2019/11/07 01:07:05.941798 OSPF: ip_v 4
2019/11/07 01:07:05.941806 OSPF: ip_hl 5
2019/11/07 01:07:05.941813 OSPF: ip_tos 192
2019/11/07 01:07:05.941821 OSPF: ip_len 68
2019/11/07 01:07:05.941831 OSPF: ip_id 48576
2019/11/07 01:07:05.941838 OSPF: ip_off 0
2019/11/07 01:07:05.941845 OSPF: ip_ttl 1
2019/11/07 01:07:05.941857 OSPF: ip_p 89
2019/11/07 01:07:05.941865 OSPF: ip_sum 0xcf33
2019/11/07 01:07:05.941873 OSPF: ip_src 200.254.30.14
2019/11/07 01:07:05.941882 OSPF: ip_dst 224.0.0.5
We already have this debugged, it's not going to change and the
end developer can stick this back in if needed by hand to debug
something that is not working properly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit has:
The received packet path in ospf, had absolutely no debugs associated with
it. This makes it extremely hard to know when we receive packets for
consumption. Add some breadcrumbs to this end.
Large chunks of commands have no ability to debug what is happening
in what vrf. With ip overlap X vrf this becomes a bit of a problem
Add some breadcrumbs here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a helper function to return the name of the vrf we are in
so it can be used as part of debug strings.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have a bunch of places that look for ORIGINAL_CODING. There is
nothing in our configure system to define this value and a quick
git blame shows this code as being original to the import a very
very long time ago. This is dead code, removing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Recently Lot of issues are seen in OSPF adjacnecy establishements,
sessions was tear down because of DD Sequence Number mismatch.
adding Debugs to capture Master & slave generated sequence numbers.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Use a local variable to avoid trying to take the address
of a packed struct member - an address from the ip header
in these cases.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The opaque lsa that we are storing is stored on various
lists depending on it's type. This removal from the
list was being done *after* the pointer was freed. This
is not a good idea. Since the use after free was just
removal from a linked list and the freeing function does
not do anything other than free data, than just switching the function
order should be sufficient.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Root Cause:
Lookup for the point-to-point neighbor was failing because the neighbor
lookup was based on neighbor interface IP address. But, for point-to-point
neighbor the key is router-id for lookup. Lookup failure was causing the
BFD updates from PTM to get dropped.
Fix:
Added walk of the neighbor list if the network type is point-to-point to
find the appropriate neighbor. The match is based on source IP address of
the neighbor since that’s the address registered with BFD for monitoring.
Ticket: CM-20411
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Scenarios where this code change is required:
1. BFD is un-configured from BGP at remote end.
Neighbour BFD sends ADMIN_DOWN state, but BFD on local side will send
DOWN to BGP, resulting in BGP session DOWN.
Removing BFD session administratively shouldn't bring DOWN BGP session
at local or remote.
2. BFD is un-configured from BGP or shutdown locally.
BFD will send state DOWN to BGP resulting in BGP session DOWN.
(This is akin to saying do not use BFD for BGP)
Removing BFD session administratively shouldn't bring DOWN BGP session at
local or remote.
Signed-off-by: Sayed Mohd Saquib sayed.saquib@broadcom.com
Cleanup the interface creation apis to make it more
clear what they are doing.
Make it explicit that the creation via name/ifindex will
only add it to the appropriate list.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There's no need to install MPLS FTNs using the ZEBRA_ROUTE_ADD
message since the ZEBRA_MPLS_LABELS_ADD message already does that
(in addition to installing an MPLS LSP).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This new message makes it possible to install/reinstall LSPs with
multiple nexthops using a single ZAPI message.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Add ability to specify the nexthop type;
* Add ability to install or not a FTN (in addition to an LSP).
These two additions will be useful to install local SR Prefix-SIDs
configured with the no-PHP option.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
SR support for IS-IS is coming so we need to be able to distinguish
OSPF and IS-IS LSPs.
While here, add missing case statement for LDP on
lsp_type_from_re_type().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use the route type and instance instead of the route distance
to identify MPLS FTNs. This is a more robust approach since the
routing daemons can modify the distance of their announced routes
via configuration, which can cause inconsistencies.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do this for the following reasons:
* Improve modularity of the code by separating the decoding of the
ZAPI messages from their processing;
* Create an API that is easier to use by the client daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When OSPF receives a Database description packet and is in
`Down`, `Attempt` or `2-Way` state we are creating a warning
for the end user.
rfc2328 states(10.6):
Down - The packet should be rejected
Attempt - The packet should be rejected
2-Way - The packet should be ignored
I cannot find any instructions in the rfc to state what the operational
difference is between rejected and ignored. Neither can I figure
out what FRR expects the end user to do with this information.
I can see this information being useful if we encounter a bug
down the line and we have gathered a bunch of data. As such
let's modify the code to remove the flog_warn and convert
the message to a debug level message that can be controlled by
appropriate debug statements.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This looks like a finish up of the partial cleanup that
ocurred at some point in time in the past. When we
alloc oi also always alloc the oi->obuf. When we delete
oi always delete the oi->obuf right before.
This cleans up a bunch of code to be simpler and hopefully
easier to follow.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
I am rarely seeing this crash:
r2: ospfd crashed. Core file found - Backtrace follows:
[New LWP 32748]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/aarch64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/ospfd'.
Program terminated with signal SIGABRT, Aborted.
2019-08-29 15:59:36,149 ERROR: assert failed at "test_ospf_sr_topo1/test_memory_leak":
Which translates to this code:
node = listhead(ospf->oi_write_q);
assert(node);
oi = listgetdata(node);
assert(oi);
So if we get into ospf_write without anything on the oi_write_q
we are stopping the program.
This is happening because in ospf_ls_upd_queue_send we are calling
ospf_write. Imagine that we have a interface already on the on_write_q
and then ospf_write handles the packet send for all functions. We
are not clearing the t_write thread and we are popping and causing
a crash.
Additionally modify OSPF_ISM_WRITE_ON(O) to not just blindly
turn on the t_write thread. Only do so if we have data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
ospfd: Remove redundant asserts
assert(oi) is impossible all listgetdata(node) directly proceeding
it already asserts here, besides a node cannot be created
with a null pointer!
If list_isempty is called directly before the listhead call
it is impossilbe that we do not have a valid pointer here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vrf hook handler associated to updating the vrf default name is added.
Then, when creating default ospf vrf instance, the vrf identifier will
be associated to the correct default vrf name.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when an other name is given to default vrf, then there is case where 2
ospf instances are created, which is not wished. Also, it appears that
interface learning and ospf interface configuration is not lost when not
creating that default ospf instance. So removing it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `destination` field of the connection structure was used to store
the broadcast address, if the connection was not p2p. This multipurpose
is not very evident and the benefits over calculating the bcast address
on the fly minimal.
Signed-off-by: Juergen Werner <juergen@opensourcerouting.org>
Need to clear out the external_info for the "always" default route that
we installed in ospf_redistribute_default_set().
Signed-off-by: David Lamparter <equinox@diac24.net>
This is a "workaround" for something broken in LSDB sync that has been
kept around since the beginning of our git history...
(It works correctly without this "workaround".)
Signed-off-by: David Lamparter <equinox@diac24.net>
ospf->external[DEFAULT_ROUTE] and zclient->default_information don't
line up with each other; the former is only used for "originate always".
Fixes: #4237
Signed-off-by: David Lamparter <equinox@diac24.net>
This reverts commit a6b4e1fded.
This fix is wrong too. The zclient->redist & ->mi_redist arrays are
accessed past their size for any external route that is not 0.0.0.0/0.
Also, it is incorrect to check default_information for DEFAULT_ROUTE
since that's "originate always".
Signed-off-by: David Lamparter <equinox@diac24.net>
This reverts commit 313919d6e3.
This is not the correct way to fix this.
- touching the LSDB to explicitly remove a MaxAge LSA is always wrong
and results in desynchronization of the entire routing domain
- the LSDB code correctly handles replacing a MaxAge LSA with a newly
issued one
- removing the old LSA resets the sequence numbers, which may cause
other routers to reject the new LSA as old
- the function was horribly misnamed
Signed-off-by: David Lamparter <equinox@diac24.net>
Neither ospf_external_lsa_originate_timer() nor
ospf_default_originate_timer() are actually timers. They're only
executed on router-ID changes to refresh a particular LSA type.
Signed-off-by: David Lamparter <equinox@diac24.net>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
State1:
If match cmd returns RMAP_MATCH then, keep existing behaviour.
If routemap type is PERMIT, execute set cmds or call cmds if applicable,
otherwise PERMIT!
Else If routemap type is DENY, we DENYMATCH right away
State2:
If match cmd returns RMAP_NOMATCH, continue on to next route-map. If there
are no other rules or if all the rules return RMAP_NOMATCH, return DENYMATCH
We require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Also, this rule should be applicable for routes with VNI label only, and
not for routes without labels. For example, type 3 and type 4 EVPN routes
do not have labels, so, this match cmd should let them through.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
As a result we have a 3rd state:
State3:
If match cmd returned RMAP_NOOP
Then, proceed to other route-map, otherwise if there are no more
rules or if all the rules return RMAP_NOOP, then, return RMAP_PERMITMATCH.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
no router ospf triggers to cancel all threads
including read/write (receive/send packets) threads,
cleans up resources fd, message queue and data.
Last job of write (packet) thread invoked where the
ospf instance is referenced is not running nor
the socket fd valid.
Write thread callback should check if fd is valid and
ospf instance is running before proceeding to send a
message over socket.
Ticket:CM-20095
Testing Done:
Performed the multiple 'no router ospf' with the fix
in topology where the crash was seen.
Post fix the crash is not observed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Same ospf neigbor can be learnt via multiple
interfaces, ospf detail json only displayed
last instance only.
Fix json output format to contain "neighbors"
keyword, under which to display all neighbors
for a given vrf.
Fix
show ip ospf neighbor detail json
show ip ospf neighbor detail all json
show ip ospf neighbor <intf name> detail json
Ticket:CM-25528
Reviewed By:
Testing Done:
Run the output with JSON formatter and the output
has passed.
switch1# show ip ospf vrf all neighbor detail json
{
"default":{
"vrfName":"default",
"vrfId":0,
"neighbors":{
"0.0.0.2":[
{
"ifaceAddress":"14.0.0.22",
"areaId":"0.0.0.0",
"ifaceName":"Bridge1.510",
"nbrPriority":1,
"nbrState":"Full",
"stateChangeCounter":6,
"lastPrgrsvChangeMsec":82668,
"routerDesignatedId":"14.0.0.22",
"routerDesignatedBackupId":"14.0.0.21",
"optionsCounter":2,
"optionsList":"*|-|-|-|-|-|E|-",
"routerDeadIntervalTimerDueMsec":36195,
"databaseSummaryListCounter":0,
"linkStateRequestListCounter":0,
"linkStateRetransmissionListCounter":0,
"threadInactivityTimer":"on",
"threadLinkStateRequestRetransmission":"on",
"threadLinkStateUpdateRetransmission":"on",
"peerBfdInfo":{
"type":"single hop",
"detectMultiplier":4,
"rxMinInterval":600,
"txMinInterval":800,
"status":"Down",
"lastUpdate":"0:00:00:29"
}
},
{
"ifaceAddress":"14.0.0.26",
"areaId":"0.0.0.0",
"ifaceName":"Bridge1.511",
"nbrPriority":1,
"nbrState":"Full",
"stateChangeCounter":6,
"lastPrgrsvChangeMsec":82658,
"routerDesignatedId":"14.0.0.26",
"routerDesignatedBackupId":"14.0.0.25",
"optionsCounter":2,
"optionsList":"*|-|-|-|-|-|E|-",
"routerDeadIntervalTimerDueMsec":36196,
"databaseSummaryListCounter":0,
"linkStateRequestListCounter":0,
"linkStateRetransmissionListCounter":0,
"threadInactivityTimer":"on",
"threadLinkStateRequestRetransmission":"on",
"threadLinkStateUpdateRetransmission":"on"
},
]
}
}
}
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The shutdown of ospf was causing crashes because the shutdown
was calling a ALL_LIST_ELEMENTS_RO macro and modifying the
underlying data structures. Switch to using ALL_LIST_ELEMENTS.
This is caused by this change:
commit f9e1501aea5d429be2ecda1a3e2bde17e6ad5e4b
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Wed Feb 27 15:08:29 2019 -0500
ospfd: Cleanup ospf->redist and ospf->external on shutdown
Effectively my original testing for this only had one external
route and as such we would not have a crash here. It only
showed up after multiple externals have been introduced.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These two data types were written to handle redistribute
and external data types. On shutdown cleanup the memory
allocated to these if we are doing redistribution.
This was found using valgrind.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf_id parameter is replaced with struct vrf * parameter. It is
needed to create vrf structure before entering in the fuction.
an error is generated in case the vrf parameter is missing.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf pointer is used as reference when calling if_get_by_name() function.
this will permit to create interfaces with an unknown vrf_id, since it
is only necessary to get the vrf structure to store the interfaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
Action: Apply route-map match and return the result (RMAP_MATCH/RMAP_NOMATCH)
State1: Receveived RMAP_MATCH
THEN: If Routemap type is PERMIT, execute other rules if applicable,
otherwise we PERMIT!
Else: If Routemap type is DENY, we DENYMATCH right away
State2: Received RMAP_NOMATCH, continue on to next route-map, otherwise,
return DENYMATCH by default if nothing matched.
With reference to PR 4078 (https://github.com/FRRouting/frr/pull/4078),
we require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP (or another enum) to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
Question: Do we repurpose an existing enum RMAP_OKAY or RMAP_ERROR
as the 3rd state (or create a new enum like RMAP_NOOP)?
RMAP_OKAY and RMAP_ERROR are used to return the result of set cmd.
We chose to go with RMAP_NOOP (but open to ideas),
as a way to bypass the rmap filter
As a result we have a 3rd state:
State3: Received RMAP_NOOP
Then, proceed to other route-map, otherwise return RMAP_PERMITMATCH by default.
Signed-off-by:Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
bfd cbit is a value carried out in bfd messages, that permit to keep or
not, the independence between control plane and dataplane. In other
words, while most of the cases plan to flush entries, when bfd goes
down, there are some cases where that bfd event should be ignored. this
is the case with non stop forwarding mechanisms where entries may be
kept. this is the case for BGP, when graceful restart capability is
used. If BFD event down happens, and bgp is in graceful restart mode, it
is wished to ignore the BFD event while waiting for the remote router to
restart.
The changes take into account the following:
- add a config flag across zebra layer so that daemon can set or not the
cbit capability.
- ability for daemons to read the remote bfd capability associated to a bfd
notification.
- in bfdd, according to the value, the cbit value is set
- in bfdd, the received value is retrived and stored in the bfd session
context.
- by default, the local cbit announced to remote is set to 1 while
preservation of the local path is not set.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The route_map_event_hook callback was passing the `route_map_event_t`
to each individual interested party. No-one is ever using this data
so let's cut to the chase a bit and remove the pass through of data.
This is considered ok in that the routemap.c code came this way
originally and after 15+ years no-one is using this functionality.
Nor do I see any `easy` way to do anything useful with this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vrf_id parameter is added to the api of bfd_client_sendmsg().
this permits being registered to bfd from a separate vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Solve issue #4198
Link-ID and Remote IP address must be set accordingly to the interface type
(Point-to-Point or Broadcast) from the neighbor information. However, this
information are only valid once the Network State Machine (NSM) is Full i.e.
when the adjacency is up. The original TE code only look to Interface State
Machine (ISM) change which not allow to collect valid neighbor information.
The patch move setup of Link-ID and Remote-IP TE parameters from
ospf_mpls_te_ism_change() to ospf_mpls_te_nsm_change() function.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The order of ECMP nexthops currently depends on whatever order the
pqueue code returns the vertices in, which is essentially random since
they compare as equal. While this shouldn't cause issues normally, it
is nondeterministic and causes the ldp-topo1 test to fail when the
ordering comes up different. Also, nondeterministic behaviour is not a
nice thing to have here in general.
Just sort by nexthop address; realistic numbers of ECMP nexthops should
hopefully not make this a performance issue. (Also, nexthops should be
hot in the caches here.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
OSPFD uses -1 as a sentinel value for uninitialized metrics. When
applying a route map with a +/-metric to redistributed routes, we were
using -1 as our base value to increment or decrement on, which meant
that if you set e.g. +10, you would end up with a redistributed route of
metric 9.
This patch also removes an off-by-one sanity check that would cause a
set metric +1 or set metric 0 to result in a metric value of 20 :-)
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
rn is not set the first time through the do {} while (); loop
As such we need to protect against it from being null( although
highly unlikely to ever happen given the ospf code base.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
While fragmenting ospf ls packets, before appending the link state info,
wrong value is checked to see if current packet can fit in another ls info.
Because of this, when a lower mtu is configured, it couldn't fit in even 1
ls ack, which tries to send all the available ls ack in the list in loop.
This keeps allocating memory to send the packet and ends up putting the
packet buffer without ls-ack into deferred send que(ospf_ls_ack_send_delayed).
This infinite loop causes infinite memory being allocated in a loop causing
system to be unstable. This commit takes care of calculating the right value
to compare for checking oif this buffer can fit in more.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Fix a few json output values: a few are in seconds, not msecs,
and one is a number-per-second, not a duration.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When creating a ospf vrf based instance allow it to work
if the vrf has been created *before* we create the ospf
instance.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Made changes and updated the routemap applied counter in the following flows.
1.Increment the routemap applied counter when route map attached to a
redistribution list. The counter will be updated if the routemap exists.
2.Decrement when route map removed / modified from a redistribution list.
3.Increment/decrement when route map create/delete callback triggered.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
Based on the vulnerability mentioned in 793496 an attacker can craft an
LSA with MaxSequence number wtih invalid links and not set age to MAX_AGE
so the lsa would not be flush from the database.
To address the issue, check incoming LSA is MaxSeq but Age is not set
to MAX_AGE 3600, discard the LSA from processing it.
Based on RFC-2328 , When a LSA update sequence reaches MaxSequence
number, it should be prematurely aged out from the database with age set
to MAX_AGE (3600).
Ticket:CM-18989
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
Ospfd cored because of an assert when we try to write more than the MTU
size to the ospf packet buffer stream. The problem is - we allocate only MTU
sized buffer. The expectation is that Hello packets are never large
enough to approach MTU. Instead of crashing, this fix discards hello and
logs an error. One should not have so many neighbors behind an
interface.
Ticket: CM-22380
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8204
the command was not checking
correctly in all cases whether the virtual link existed. This caused
bugs in some corner cases, e.g. when two virtual links were created,
one of them was deleted, and the second one was reset with no
authentication - this would instead create a new virtual link with
the area in decimal format.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
default-information originate does not work
if config is removed and re-added.
Ticket:CM-20026
Testing Done:
Validate default-information originate config
removed and re-added, check ospf lsa database, and peer
route cache entry for default route.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Some daemons like ospfd and isisd have the ability to advertise a
default route to their peers only if one exists in the RIB. This
is what the "default-information originate" commands do when used
without the "always" parameter.
For that to work, these daemons use the ZEBRA_REDISTRIBUTE_DEFAULT_ADD
message to request default route information to zebra. The problem
is that this message didn't have an AFI parameter, so a default route
from any address-family would satisfy the requests from both daemons
(e.g. ::/0 would trigger ospfd to advertise a default route to its
peers, and 0.0.0.0/0 would trigger isisd to advertise a default route
to its IPv6 peers).
Fix this by adding an AFI parameter to the
ZEBRA_REDISTRIBUTE_DEFAULT_{ADD,DELETE} messages and making the
corresponding code changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
DEFPY commands are easier to maintain and less susceptible to
bugs. In the long term we should try to merge the plethora of
"show ip ospf neighbor" commands (total of 14) into a single DEFPY.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
cf. https://wiki.debian.org/NonFreeIETFDocuments
These MIBs were in our git purely for documentation purposes, they are
not installed and not needed for building SNMP support.
Signed-off-by: David Lamparter <equinox@diac24.net>
so as to isolate ospf contexts separately for each vrf, the interface
used is cornered to the passed vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This reverts commit 48944eb65e.
We're using GNU C, not ISO C - and this commit triggers new (real)
warnings about {0} instead of bogus ones about {}.
Signed-off-by: David Lamparter <equinox@diac24.net>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Router Information needs to specify the area ID when flooding scope is set to
AREA. However, this authorize only one AREA. Thus, Area Border Router (ABR) are
unable to flood Router Information Opaque LSA in all areas they are belongs to.
The path implies that the area ID is no more necessary for the command
'router-info area'. It remains suported for compatibility, but mark as
deprecated. Documentation has been updated accordingly.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
avoid counting twice the number of areas configured, when entering back
to router ospf config node.
PR=61288
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Acked-by: Emmanuel Vize <emmanuel.vize@6wind.com>
The frr-interface YANG module models interfaces using a YANG list keyed
by the interface name and the interface VRF. Interfaces can't be keyed
only by their name since interface names might not be globally unique
when the netns VRF backend is in use. When using the VRF-Lite backend,
however, interface names *must* be globally unique. In this case, we need
to validate the uniqueness of interface names inside the appropriate
northbound callback since this constraint can't be expressed in the
YANG language. We must also ensure that only inactive interfaces can be
removed, among other things we need to validate in the northbound layer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce frr-interface.yang, which defines a model for managing FRR
interfaces.
Update the 'frr_yang_module_info' array of all daemons that will
implement this module.
Add automatically generated stub callbacks in if.c. These callbacks will
be implemented in the following commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR_DAEMON_INFO should now contain an array of 'frr_yang_module_info'
structures describing the YANG modules implemented by the daemon.
This array will be used by frr_init() function to load all YANG modules
and initialize the northbound callbacks during the daemon initialization.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
when adding/removing virtual links per interface, sometimes, the ospf
virtual link can not be removed, whereas the associated area is already
removed. Do not remove the area while a virtual link is yet configured.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a missing check to bail out earlier when SR is not configured. The
same command without the "no" prefix has the same check as it prevents
unexpected things (i.e. crashes) from happening.
Fixes the following segfaults:
ospfd aborted: vtysh -c "configure terminal" -c "router ospf" -c "no segment-routing prefix 1.1.1.1/32"
ospfd aborted: vtysh -c "configure terminal" -c "router ospf" -c "no segment-routing prefix 1.1.1.1/32 index 65535 no-php-flag"
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When the ospf->oi_write_q is not empty that means that ospf could
already have a thread scheduled for running. Just dropping
the pointer before resheduling does not stop the one currently
scheduled for running from running. The calling of thread_add_write
checks to see if we are already running and does the right thing here
so it is sufficient to just call thread_add_write.
This issue was tracked down from this stack trace:
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: [EC 134217739] interface eth2.1032:172.16.4.110: ospf_check_md5 bad sequence 5333618 (expect 5333649)
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: message repeated 3 times: [ [EC 134217739] interface eth2.1032:172.16.4.110: ospf_check_md5 bad sequence 5333618 (expect 5333649)]
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: Assertion `node’ failed in file ospfd/ospf_packet.c, line 666, function ospf_write
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: Backtrace for 8 stack frames:
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: [bt 0] /usr/lib/libfrr.so.0(zlog_backtrace+0x3a) [0x7fef3efe9f8a]
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: [bt 1] /usr/lib/libfrr.so.0(_zlog_assert_failed+0x61) [0x7fef3efea501]
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: [bt 2] /usr/lib/frr/ospfd(+0x2f15e) [0x562e0c91815e]
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: [bt 3] /usr/lib/libfrr.so.0(thread_call+0x60) [0x7fef3f00d430]
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: [bt 4] /usr/lib/libfrr.so.0(frr_run+0xd8) [0x7fef3efe7938]
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: [bt 5] /usr/lib/frr/ospfd(main+0x153) [0x562e0c901753]
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: [bt 6] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7fef3d83db45]
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: [bt 7] /usr/lib/frr/ospfd(+0x190be) [0x562e0c9020be]
Oct 19 18:04:00 VYOS-R1 ospfd[1811]: Current thread function ospf_write, scheduled from file ospfd/ospf_packet.c, line 881
Oct 19 18:04:00 VYOS-R1 zebra[1771]: [EC 4043309116] Client ‘ospf’ encountered an error and is shutting down.
Oct 19 18:04:00 VYOS-R1 zebra[1771]: client 41 disconnected. 0 ospf routes removed from the rib
We had an assert(node) in ospf_write, which means that the list was empty. So I just
searched until I saw a code path that allowed multiple writes to the ospf_write function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Made changes such that message wont be sent to zebra to validate default
route existence if user configured with “always”.
Signed-off-by: rgirada <rgirada@vmware.com>
Default route type is not considered while processing lsa
refresh timer expiry which intern makes it flushed from lsdb.
Signed-off-by: rgirada <rgirada@vmware.com>
Issue: # https://github.com/FRRouting/frr/issues/1836
Issue 1: if the router ospf current configuration is "area 0.0.0.2
range 1.0.0.0/24 cost 23" and user try to configure "area 0.0.0.2
range 1.0.0.0/24 not-advertise", the existing o/p is "area 0.0.0.2
range 1.0.0.0/24 cost 23 not-advertise". The keywords "not-advertise"
& "cost" are multually exclusive, so they should not come together.
The vice versa way configuration is working fine.
Fix: When ospf area range "not-advertise", the cost should be initialized
to OSPF_AREA_RANGE_COST_UNSPEC.
Issue 2: if the router ospf current configuration "area 0.0.0.2 range
1.0.0.0/24 substitute 2.0.0.0/24" and user try to configure "area 0.0.0.2
range 1.0.0.0/24 not-advertise" the existing o/p is "area 0.0.0.2 range
1.0.0.0/24 not-advertise substitute 2.0.0.0/24". The keywords
"not-advertise" & "substiture" are multually exclusive, so they should
not come together. The vice versa way configuration is working fine.
Fix: When ospf area range "not-advertise" is configured,
ospf_area_range_substitute_unset() should be get called.
Issue 3: if the router ospf6 current configuration is "area 0.0.0.2
range 2001::/64 cost 23" and user try to configure "area 0.0.0.2 range
2001::/64 advertise", the existing o/p is area 0.0.0.2 range 2001::/64.
The keyword "cost 23" disappears.
Fix: When ospf area range "advertise" is configured and the range is not
NULL, the cost should not be modified.
Signed-off-by: Sarita Patra <saritap@vmware.com>
The head and tail pointers of linked lists should never be modified
manually, the linked list API guarantees that these pointers are always
valid and up-to-date.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
config.h (or, transitively, zebra.h) must be the first include file
listed for autoconf things like _GNU_SOURCE and _POSIX_C_SOURCE to work
correctly.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
If we detect we already have a neighbor, no need to
re-add so no need to warn since we do not do anything with
the data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) stream allocation cannot fail
2) some warnings were removed when functions safely ignored
the calling parameters being wrong.
3) some warnings were removed when functions did not consider
the state as an error since we did not return an error code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The problem is seen where speed mismatch caused ECMP route
not being reflected with correct number paths (NHs).
During cold boot, some interface speed updated by zebra as
part of one shot timer and triggers interface add to clients.
In this case, ospf already have created interface (bond interface),
but speed was not updated, trigger to do interface speed change
as part of interface add, which will trigger all Router LSA to
use updated speed into cost calculation.
Ticket:CM-22170
Testing Done:
Bring up CLOS config with Spine and leafs. Leaf have CLAG pair,
with same VRR ip address.
At spine one of the bond connecting to leaf node was having
higher speed than the paired device, With this fix, at spine (DUT)
bond interface speed is equal from all peer nodes.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The ospf_external_route_lookup function was not
being used so let's just remove it.
Unfortunately the removal was not quite so simple as
that ospf_asbr.h was being used to generate a reference
for the `struct ospf_route` data structure, so we
need to fix up the compile by fixing up header
inclusions so that ospf_route.h is actually included
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In all but one instance we were following this pattern
with ospf_lsa_new:
ospf_lsa_new()
ospf_lsa_data_new()
so let's create a ospf_lsa_new_and_data to abstract
this bit of fun and cleanup all the places where
it assumes these function calls can fail.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Use the correct license header
* Stop headers from including themselves
* Use uniform relative include conventions
* Ensure that sources include what they use
* Turn off clang-format around struct array blocks
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't show BFD commands with timers since it might confuse users
("show running-config" won't display timers in client daemons anymore),
but keep accepting this command from previous configurations.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When BFD timers are configured, don't show it anymore in the daemon
side. This will help us migrate the timers command from daemons to
`bfdd`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When calling route_map_finish, every place that we do we must
first set the deletion event to NULL, or we will create an infinite
loop, if we are using the delayed route-map application code.
As such we might as well just make the route_map_finish code
do this work, as that there is really no viable alternative here
and route_map_finish should only be called on shutdown.
This fixes an infinite loop in zebra on shutdown when there
are route-maps.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
