Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
We would only diplay one "no neighbor 2.2.2.2 send-community XYZ" but
there might be multiple that need to be displayed.
Add checks related to AFI_L2VPN/SAFI_EVPN that were missing in some parts
of the code. Fix incorrect check skipping EVPN when sending End of RIB.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
For certain (sub) address families such as EVPN or L3VPN, the routing
table is organized as a 2-level tree. Ensure that code walking the
routing table does the correct handling in such cases.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Basically if we are reading in a cli with a extended-nexthop
and we have not received from zebra the interface we are working
on I believe we have a race condition where we are not
propagating the PEER_FLAG_CAPABILITY_ENHE in this case.
Modify the code to propagate even if we haven't found the
interface yet.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Basically if we are reading in a cli with a extended-nexthop
and we have not received from zebra the interface we are working
on I believe we have a race condition where we are not
propagating the PEER_FLAG_CAPABILITY_ENHE in this case.
Modify the code to propagate even if we haven't found the
interface yet.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vrf_iflist_create -> By the time this is called in enable, the vrf's iflist
is already created. Additionally this code should be a properly of the vrf
to init/destroy not someone else.
vrf_iflist_terminate -> This function should be a property of vrf deletion
and does not need to be exposed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Implement support for negotiating IPv4 or IPv6 labeled-unicast address
family, exchanging prefixes and installing them in the routing table, as
well as interactions with Zebra for FEC registration. This is the
implementation of RFC 3107.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Implement support for activating the labeled-unicast address family in
BGP and relevant configuration for this address family.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This means there are no ties into the SNMP code anymore other than the
init call at startup.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Start centralising startup & option parsing into the library.
FRR_DAEMON_INFO is a bit weird, but it will become useful later (e.g.
for killing the ZLOG_* enum, and having the daemon name available)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When starting up bgp and zebra now, you can specify
-e <number> or --ecmp <number>
and that number will be used as the maximum ecmp
that can be used.
The <number specified must be >= 1 and <= MULTIPATH_NUM
that Quagga is compiled with.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When configuring l2vpn evpn address-family, the show running indicates
that the address-family l2vpn evpn address-family has been configured,
and not evpn, as it was done before this commit. This is a bug fix.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch introduces show show bgp evpn commands to dump
NLRI entries configured or received on BGP, related to EVPN
New command introduced is the following:
show [ip] bgp l2vpn evpn [all | rd <rd name> ] [overlay]
Like for MPLS, similar set of commands is added for EVPN:
show [ip] bgp l2vpn evpn [all|rd <RDNAME>]
show [ip] bgp l2vpn evpn all neighbor <NEIGHBOR> routes
show [ip] bgp l2vpn evpn all neighbor <NEIGHBOR> advertised-routes
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch introduces code to receive a NLRI message with route type
5, as defined in draft-ietf-bess-evpn-prefix-advertisement-02. It
It increases the number of parameters to extract from the NLRI and
to store into bgp extra information structure. Those parameters are
the ESI (ethernet segment identifier), the gateway IP Address (which
acts like nexthop attribute but is contained inside the NLRI itself)
and the ethernet tag identifier ( that acts for the VXLan Identifier)
This patch updates bgp_update() and bgp_withdraw() api, and then does the
necessary adapations for rfapi.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
To handle BGP NLRI EVPN messages, bgp is modified to handle AFI_L2VPN
and SAFI_EVPN values.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
BGP Large Communities are a novel way to signal information between
networks. An example of a Large Community is: "2914:65400:38016". Large
BGP Communities are composed of three 4-byte integers, separated by a
colon. This is easy to remember and accommodates advanced routing
policies in relation to 4-Byte ASNs.
This feature was developed by:
Keyur Patel <keyur@arrcus.com> (Arrcus, Inc.),
Job Snijders <job@ntt.net> (NTT Communications),
David Lamparter <equinox@opensourcerouting.org>
and Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Job Snijders <job@ntt.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce internal and IANA defintions for AFI/SAFI and mapping
functions and modify code to use these. This refactoring will
facilitate adding support for other AFI/SAFI whose IANA values
won't be suitable for internal data structure definitions (e.g.,
they are not contiguous).
The commit adds some fixes related to afi/safi testing with 'make check
' command.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Ticket: CM-11416
Reviewed By: CCR-3594 (mpls branch)
Testing Done: Not tested now, tested earlier on mpls branch
Preserve forwarding state bit can be set in OPEN message with the use of
new vty commands
bgp graceful-restart preserve-fw-state
no bgp graceful-restart preserve-fw-state
This must be set before activating the connection to a peer, since it is
for forging graceful restart capability of OPEN messages.
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
This patch enable the support of graceful restart for routes sets with
vpnv4 address family format. In this specific case, data model is
slightly different and some additional processing must be done when
accessing bgp tables and nodes.
The clearing stale algorithm takes into account the specificity where
the 2 node level for MPLS has to be reached.
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
bgp_master_init is called first thing in main(), so we need to wedge a
qobj_init() call in there... this needs some improvement...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This contains bgp memory leak fixes as well as cleanups to VRF/namespace
handling and has been run through extended testing in Cumulus' testbed:
Tested-by: Donald Sharp <sharpd@cumulusnetworks.com>
During connection establishment, there is a separate peer structure created
for the doppelganger (for incoming connection). When this is deleted after
the connection has established, take care to ensure that the nexthop entry
for the peer is not deleted.
Fixes: f9164b1d74
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-13875
Reviewed By: None
Testing Done: Manual
(cherry picked from commit 4f2bc892cbddbf36bd5e1b2f36c33260af614b33)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
We shoult not call bgp_unlock() before calling
bgp_delete_connected_nexthop() in the peer_free() function. Otherwise,
if bgp->lock reaches zero, bgp_free() is called and peer->bgp becomes
an invalid pointer in the bgp_delete_connected_nexthop() function.
To fix this, move the call to bgp_unlock() to the end of peer_free().
Bug exposed by commit 37d361e ("bgpd: plug several memleaks").
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
We shoult not call bgp_unlock() before calling
bgp_delete_connected_nexthop() in the peer_free() function. Otherwise,
if bgp->lock reaches zero, bgp_free() is called and peer->bgp becomes
an invalid pointer in the bgp_delete_connected_nexthop() function.
To fix this, move the call to bgp_unlock() to the end of peer_free().
Bug exposed by commit 37d361e ("bgpd: plug several memleaks").
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Since VRFs can be searched by vrf_id or name, make this explicit in the
helper functions.
s/vrf_lookup/vrf_lookup_by_id/
s/zebra_vrf_lookup/zebra_vrf_lookup_by_id/
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
It seems these two were at some point copied in from rsync; replace with
more recent versions that will hopefully become available in glibc as
well.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
bgpd/bgpd.c had a typo
zebra/zebra_mpls_netlink.c was derived from rt_netlink.c
isisd/include-netbsd/* are not needed (2 constants moved over)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-13239
Until today the admin distance cannot be configured for any IPv6
routing protocol. This patch implements it for bgp.
Signed-off-by: Maitane Zotes <maz@open.ch>
Signed-off-by: Roman Hoog Antink <rha@open.ch>
* Fix mild leak, bgp_nexthop_caches were not deleted when their peer was.
Not a huge one, but makes valgrinding for other leaks noisier.
Credit to Lou Berger <lberger@labn.net> for doing the hard work of
debugging and pinning down the leak, and supplying an initial fix.
That one didn't quite get the refcounting right, it seemed, hence
this version.
This version also keeps bncs pinned so long as the peer is defined, where
Lou's tried to delete whenever the peer went through bgp_stop. That causes
lots of zebra traffic if down peers go Active->Connect->Active, etc., so
leaving bnc's in place until peer_delete seemed better.
* bgp_nht.c: (bgp_unlink_nexthop_by_peer) similar to bgp_unlink_nexthop, but
by peer.
* bgp_nht.c: (bgp_unlink_nexthop_check) helper to consolidate checking
if a bnc should be deleted.
(bgp_unlink_nexthop_by_peer) ensure the bnc->nht_info peer reference
is removed, and hence allow bncs to be removed by previous.
* bgpd.c: (peer_delete) cleanup the peer's bnc.
Ticket: CM-13053
Reviewed By: dslice@cumulusnetworks.com
'neighbor x.x.x.x weight' was implemented as a per-peer knob instead of
a per-peer per-afi-safi option. This makes it configurable per-peer
per-afi-safi so that we can do things like soft clear that afi/safi when
weight is modified.
This feature adds an L3 & L2 VPN application that makes use of the VPN
and Encap SAFIs. This code is currently used to support IETF NVO3 style
operation. In NVO3 terminology it provides the Network Virtualization
Authority (NVA) and the ability to import/export IP prefixes and MAC
addresses from Network Virtualization Edges (NVEs). The code supports
per-NVE tables.
The NVE-NVA protocol used to communicate routing and Ethernet / Layer 2
(L2) forwarding information between NVAs and NVEs is referred to as the
Remote Forwarder Protocol (RFP). OpenFlow is an example RFP. For
general background on NVO3 and RFP concepts see [1]. For information on
Openflow see [2].
RFPs are integrated with BGP via the RF API contained in the new "rfapi"
BGP sub-directory. Currently, only a simple example RFP is included in
Quagga. Developers may use this example as a starting point to integrate
Quagga with an RFP of their choosing, e.g., OpenFlow. The RFAPI code
also supports the ability import/export of routing information between
VNC and customer edge routers (CEs) operating within a virtual
network. Import/export may take place between BGP views or to the
default zebera VRF.
BGP, with IP VPNs and Tunnel Encapsulation, is used to distribute VPN
information between NVAs. BGP based IP VPN support is defined in
RFC4364, BGP/MPLS IP Virtual Private Networks (VPNs), and RFC4659,
BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN . Use
of both the Encapsulation Subsequent Address Family Identifier (SAFI)
and the Tunnel Encapsulation Attribute, RFC5512, The BGP Encapsulation
Subsequent Address Family Identifier (SAFI) and the BGP Tunnel
Encapsulation Attribute, are supported. MAC address distribution does
not follow any standard BGB encoding, although it was inspired by the
early IETF EVPN concepts.
The feature is conditionally compiled and disabled by default.
Use the --enable-bgp-vnc configure option to enable.
The majority of this code was authored by G. Paul Ziemba
<paulz@labn.net>.
[1] http://tools.ietf.org/html/draft-ietf-nvo3-nve-nva-cp-req
[2] https://www.opennetworking.org/sdn-resources/technical-library
Now includes changes needed to merge with cmaster-next.
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Since the default for ipv4 unicast is to now assume
that the neighbor is activated, print out the
no neighbor 192.168.33.44 activate
line when it is explicitly turned off.
Ticket: CM-12809
Reported-by: Lou Berger <lberger@labn.net>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by:
There is support to configure graceful restart timer. This is the
time to wait to delete stale routes before a BGP open message is
received.
bgp graceful-restart restart-time <1-3600>
no bgp graceful-restart [<1-255>]
* bgpd/bgp_vty.c
* Define command strings for above CLI
* bgpd/bgpd.c
* bgp_config_write(): Output graceful restart-time configuration
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
bgp_address_destroy became per-bgp instance. Moved the
call to the bgp_address_destroy function to the bgp delete.
Signed-off-by: Lou Berger <lberger@labn.net>
(cherry picked from commit 637035710a2f8e1e5944ee714135b7f88ac15ac4)
* Solaris doesn't have u_int64_t, so use uint64_t instead. C99-style
fixed-width integers should always be preferred to improve portability;
* 's_addr' is a macro on Solaris, so we can't use it as a variable name.
Rename the 's_addr' variable to 'addr' in the
bgp_peer_conf_if_to_su_update_v4() function.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Logic for determining the router-id was spread out over bgp_zebra.c and
bgp_vty.c. Move to bgpd/bgpd.c and have these two call more properly
encapsulated functions.
Significant work by Christian Franke <chris@opensourcerouting.org>.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Adds "const" on:
- peer_update_source_addr_set()
- peer_description_set()
Adds parameter names on:
- bgp_timers_set()
(really confusing, this one, with 2 unexplained args of same type)
Adds new setter:
- peer_afc_set(), calling peer_activate/peer_deactivate.
(intended for API consumers, matches peer->afc)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There was an exit added at the end of the BGP commands after we pulled the code from upstream. This was causing the reload scripts to fail. Removed this exit.
Ticket: CM-11464 CM-11924
Reviewed By: CCR-4995
Testing Done: Manual
<DETAILED DESCRIPTION (REPLACE)>
To make BGP configuration as simple as possible, assume the capability
extended-nexthop to be default for interface neighbors. Also allow the
ability to specify remote-as on the same line as neighbor interface to
make BGP unnumbered configuration a single line.
One corner case. This is the first feature for which the default for a
member is different from the default for a peer-group. Since advertising
the capability is only done for interface neighbors, the capability is
not set for the peer-group, but is automatically set for interface
neighbors that belong to that peer-group. So, if you want to disable the
advertisement of this capability for an interface neighbor, you must
do it per each interface neighbor.
The patch is more complicated than it needs to be due to the handling
of quagga reload and appropriate updates to the show running output.
Ticket: CM-11830
Reviewed By: CCR-4958
Testing Done: Usual coterie, including manual
(cherry picked from commit 347914a0a7)
Ticket: CM-11460
Reviewed By: CCR-4927
Testing Done:
Quagga's default "show running" model is to only print the non-default config.
Historically, IPv4 unicast has always had a default 'activate' model unless
its been configured otherwise. In 3.0, we introduced a print of the 'activate'
statement for IPv4 unicast independent of whether it was the default or not.
This causes quagga reload to break as the user doesn't configure 'activate' for
IPv4 unicast, and so any config changes will also not have it. However 'show
running' will display it, causing quagga reload to think that the AFI/SAFI has
been deactivated and bounce the sessions incorrectly.
This patch reverts to the original quagga behavior/model of not printing the
'activate' line for IPv4 unicast if its the default.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-11444
The bgp table may contain nodes without an 'info' (these nodes are used
for balancing the tree, they are created by route_common() in lib/table.c).
When we call bgp_recalculate_all_bestpaths() we should avoid calling
bgp_process() for these nodes. bgp_recalculate_all_bestpaths() is only
called when knobs are configured that could have an impact on which
routes are selected as best.
VPNv6 changes picked from upstream needed fixes and updates due to some
fundamental changes implemented by Cumulus (BGP update-groups, RFC 5549
and nexthop setting etc.) which aren't present upstream.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Updates: 945c8fe, 8ecd326, bb86c60, 93b73df, f4c8985
Ticket: CM-11327
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
Testing Done: Manual testing, bgp-min, vrf-min, bgp-smoke, vrf-smoke all successful
When bgp was configured in a vrf and then deleted, the vrf->iflist
was being deleted from the vrf. Since the vrf itself was not deleted,
it was assumed in later calls that the vrf->iflist was still there
and when it was referenced, the crash occurred.
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Kanna Rajagopal <kanna@cumulusnetworks.com>
Ticket: CM-11055
Reviewed By: CCR-4773
Testing Done: Unit, PTM smoke, BGP neighbor smoke
Issue: bgpd is not replaying the BFD registrations to PTM after quagga restart.
Root Cause: This problem happens when BFD configuration is part of the peer group template. Currently, the BFD configuration is being copied to the peer from template as part of the AF (address family) configuration. But, when the saved config is used after the quagga restart the peer group template is applied to the peer before the AF configuration is configured for the template. Due to this the BFD configuration never gets copied from the template to the peer and the BGP peers have no BFD configuration after the restart
Sample config which failed:
router bgp 100
bgp router-id 10.10.0.1
no bgp default ipv4-unicast
bgp bestpath as-path multipath-relax
neighbor dpeergrp_2 peer-group
neighbor dpeergrp_2 remote-as 100
neighbor dpeergrp_2 bfd
neighbor dpeergrp_2 advertisement-interval 1
neighbor dpeergrp_2 timers connect 1
neighbor dpeergrp_4 peer-group
neighbor dpeergrp_4 remote-as 400
neighbor dpeergrp_4 bfd
neighbor dpeergrp_4 advertisement-interval 1
neighbor dpeergrp_4 timers connect 1
neighbor swp2s0.1 interface peer-group dpeergrp_2
neighbor swp18s3.1 interface peer-group dpeergrp_4
!
address-family ipv4 unicast
redistribute connected route-map redist
neighbor dpeergrp_2 activate
neighbor dpeergrp_2 next-hop-self
neighbor dpeergrp_2 default-originate
neighbor dpeergrp_2 soft-reconfiguration inbound
neighbor dpeergrp_4 activate
neighbor dpeergrp_4 next-hop-self
neighbor dpeergrp_4 default-originate
neighbor dpeergrp_4 soft-reconfiguration inbound
maximum-paths 14
exit-address-family
Fix: Moved the BFD config copy from the peer group AF config copy function to the main peer group config copy function.
Ticket: CM-11327
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
Testing Done: Manual testing, bgp-min, vrf-min, bgp-smoke, vrf-smoke all successful
When bgp was configured in a vrf and then deleted, the vrf->iflist
was being deleted from the vrf. Since the vrf itself was not deleted,
it was assumed in later calls that the vrf->iflist was still there
and when it was referenced, the crash occurred.
Avoids a dynamic allocation which is usually freed immediate afterwards.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
During instance cleanup, an earlier patch walked the workqueue in order
to process queued routes of the instance. However, since the workqueue
is not per instance, the code walks and immediately processes all routes
across all instances.
This may not be ideal in the presence of VRFs, when multiple instances
will be a fact. Revert that part of the change from earlier patch. This
needs to be revisited later for a better solution.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Updates: bb86c6017e
There wasn't much missing for VPNv6 to begin with; just a few bits of
de- & encoding and a few lists to be updated.
Signed-off-by: Lou Berger <lberger@labn.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
[Editorial note: Signed-off-by may imply an authorship claim, but need not]
Edited-by: Paul Jakma <paul.jakma@hpe.com> / <paul@jakma.org>
(cherry picked from commit 9da04bca0e994ec92b9242159bf27d89c6743354)
Conflicts:
bgpd/bgp_attr.c
bgpd/bgp_mplsvpn.c
bgpd/bgpd.c
rtt is calculated dynamically by the kernel. Refresh it on
soft clear.
Fixes: ef757700d0 "bgpd: allow using rtt in route-map's set metric"
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
(cherry picked from commit 5a2a1ec18c89daec5de6690a9b0f47c0d11a0f2d)
Conflicts:
bgpd/bgpd.c
Fix lots of warnings. Some const and type-pun breaks strict-aliasing
warnings left but much reduced.
* bgp_advertise.h: (struct bgp_advertise_fifo) is functionally identical to
(struct fifo), so just use that. Makes it clearer the beginning of
(struct bgp_advertise) is compatible with with (struct fifo), which seems
to be enough for gcc.
Add a BGP_ADV_FIFO_HEAD macro to contain the right cast to try shut up
type-punning breaks strict aliasing warnings.
* bgp_packet.c: Use BGP_ADV_FIFO_HEAD.
(bgp_route_refresh_receive) fix an interesting logic error in
(!ok || (ret != BLAH)) where ret is only well-defined if ok.
* bgp_vty.c: Peer commands should use bgp_vty_return to set their return.
* jhash.{c,h}: Can take const on * args without adding issues & fix warnings.
* libospf.h: LSA sequence numbers use the unsigned range of values, and
constants need to be set to unsigned, or it causes warnings in ospf6d.
* md5.h: signedness of caddr_t is implementation specific, change to an
explicit (uint_8 *), fix sign/unsigned comparison warnings.
* vty.c: (vty_log_fixed) const on level is well-intentioned, but not going
to fly given iov_base.
* workqueue.c: ALL_LIST_ELEMENTS_RO tests for null pointer, which is always
true for address of static variable. Correct but pointless warning in
this case, but use a 2nd pointer to shut it up.
* ospf6_route.h: Add a comment about the use of (struct prefix) to stuff 2
different 32 bit IDs into in (struct ospf6_route), and the resulting
type-pun strict-alias breakage warnings this causes. Need to use 2
different fields to fix that warning?
general:
* remove unused variables, other than a few cases where they serve a
sufficiently useful documentary purpose (e.g. for code that needs
fixing), or they're required dummies. In those cases, try mark them as
unused.
* Remove dead code that can't be reached.
* Quite a few 'no ...' forms of vty commands take arguments, but do not
check the argument matches the command being negated. E.g., should
'distance X <prefix>' succeed if previously 'distance Y <prefix>' was set?
Or should it be required that the distance match the previously configured
distance for the prefix?
Ultimately, probably better to be strict about this. However, changing
from slack to strict might expose problems in command aliases and tools.
* Fix uninitialised use of variables.
* Fix sign/unsigned comparison warnings by making signedness of types consistent.
* Mark functions as static where their use is restricted to the same compilation
unit.
* Add required headers
* Move constants defined in headers into code.
* remove dead, unused functions that have no debug purpose.
(cherry picked from commit 7aa9dcef80b2ce50ecaa77653d87c8b84e009c49)
Conflicts:
bgpd/bgp_advertise.h
bgpd/bgp_mplsvpn.c
bgpd/bgp_nexthop.c
bgpd/bgp_packet.c
bgpd/bgp_route.c
bgpd/bgp_routemap.c
bgpd/bgp_vty.c
lib/command.c
lib/if.c
lib/jhash.c
lib/workqueue.c
ospf6d/ospf6_lsa.c
ospf6d/ospf6_neighbor.h
ospf6d/ospf6_spf.c
ospf6d/ospf6_top.c
ospfd/ospf_api.c
zebra/router-id.c
zebra/rt_netlink.c
zebra/rt_netlink.h
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Kanna Rajagopal <kanna@cumulusnetworks.com>
Ticket: CM-11055
Reviewed By: CCR-4773
Testing Done: Unit, PTM smoke, BGP neighbor smoke
Issue: bgpd is not replaying the BFD registrations to PTM after quagga restart.
Root Cause: This problem happens when BFD configuration is part of the peer group template. Currently, the BFD configuration is being copied to the peer from template as part of the AF (address family) configuration. But, when the saved config is used after the quagga restart the peer group template is applied to the peer before the AF configuration is configured for the template. Due to this the BFD configuration never gets copied from the template to the peer and the BGP peers have no BFD configuration after the restart
Sample config which failed:
router bgp 100
bgp router-id 10.10.0.1
no bgp default ipv4-unicast
bgp bestpath as-path multipath-relax
neighbor dpeergrp_2 peer-group
neighbor dpeergrp_2 remote-as 100
neighbor dpeergrp_2 bfd
neighbor dpeergrp_2 advertisement-interval 1
neighbor dpeergrp_2 timers connect 1
neighbor dpeergrp_4 peer-group
neighbor dpeergrp_4 remote-as 400
neighbor dpeergrp_4 bfd
neighbor dpeergrp_4 advertisement-interval 1
neighbor dpeergrp_4 timers connect 1
neighbor swp2s0.1 interface peer-group dpeergrp_2
neighbor swp18s3.1 interface peer-group dpeergrp_4
!
address-family ipv4 unicast
redistribute connected route-map redist
neighbor dpeergrp_2 activate
neighbor dpeergrp_2 next-hop-self
neighbor dpeergrp_2 default-originate
neighbor dpeergrp_2 soft-reconfiguration inbound
neighbor dpeergrp_4 activate
neighbor dpeergrp_4 next-hop-self
neighbor dpeergrp_4 default-originate
neighbor dpeergrp_4 soft-reconfiguration inbound
maximum-paths 14
exit-address-family
Fix: Moved the BFD config copy from the peer group AF config copy function to the main peer group config copy function.
* bgpd.c: (peer_uptime) Wraps after 1 year, and doesn't indicate years.
Fix. Assume a year is 365 days, for an easy life.
Fixes: Bug #836
Reported-by: Rolf Hanßen
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
peer_uptime was doing the same work unnecessarily.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
When a BGP instance including the default instance is deleted, it needs to be
unlinked from the corresponding VRF structure. However, instance deletion does
not happen in one shot but needs a lot of threads to run - peer event handling,
route processing etc. - before it can complete. Premature unlinking of the
instance from underlying VRF would result in BGP routes not being deleted from
the zebra RIB.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-10930
Reviewed By: CCR-4717
Testing Done: Manual, bgp-smoke
Instead of turning on IPv6 RA on every interface as soon as it has an IPv6
address, only enable it upon configuration of BGP neighbor. When the BGP
neighbor is deleted, signal that RAs can be turned off.
To support this, introduce new message interaction between BGP and Zebra.
Also, take appropriate actions in BGP upon interface add/del since the
unnumbered neighbor could exist prior to interface creation etc.
Only unnumbered IPv6 neighbors require RA, the /30 or /31 based neighbors
don't. However, to keep the interaction simple and not have to deal with
too many dynamic conditions (e.g., address deletes or neighbor change to/from
'v6only'), RAs on the interface are triggered upon any unnumbered neighbor
configuration.
BGP-triggered RAs will cause RAs to be initiated on the interface; however,
if BGP asks that RAs be stopped (upon delete of unnumbered neighbor), RAs
will continue to be exchanged if the operator has explicitly enabled.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-10640
Reviewed By: CCR-4589
Testing Done: Various manual and automated (refer to defect)
With the addition of RA being turned on by default.
Spewing this error message when unable to connect
doesn't make much sense anymore.
Ticket: CM-10494
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Modified the configuration code to properly allow a peer-group member
to have a route-map out applied when one does not exist on the peer-group
itself. This capability already existed for route-map in.
Ticket: CM-10058
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
Quagga BGP needed a config 'bgp multiple-instance' in order to be able
to configure and use VRFs. Since this support is intrinsic to the
implementation, make this configuration on by default. Corresponding
change to 'show running-config' (and write) to display only if "no" is
configured.
This change will eliminate one unnecessary step in the configuration.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-10070
Reviewed By: CCR-4383
Testing Done: Manual
When displaying the output of a 'show run',
display the neighbor information in an ordered
manner.
Ticket: CM-10184
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
When creating a 'struct peer' add in the ability to set the peer group
associated with that peer.
Ticket: CM-10184
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Upon receipt of incoming connection, a peer structure (doppelganger) is
created internally and the connection processed for it. The problem is
that in the case of BGP unnumbered, the sockunion structure within BGP was
being updated (in peer_create()) prior to the peer's flags being updated,
so it didn't take into account the 'v6only' configuration. This results
in subsequent problems when bgp_bind() is done - the socket ends up being
bound to the BGP instance instead of the interface.
In the case of an incoming connection, we should just use the addresses
on which the connection was setup/accepted, there is no need to attempt to
derive it again. Further, there is no need to attempt to update addresses
at the time of peer_create() since that is done when the connection is
attempted in bgp_start().
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-10028
Reviewed By: CCR-4373
Testing Done: Manual, bgpsmoke
Updates to routemaps and delete of the routemap were not working properly
for VRFs. This was because while routemaps are global, the routemap update
processing timer and the processing were at the per-instance level. This
approach was unable to handle processing for multiple instances as the
routemap has no tracking of which instances are still pending processing.
This lead to the processing happening correctly only for the first instance
- which could be the default instance or some other instance. It could also
result in reference to freed memory for an instance.
The fix done is to make the update/delete processing also global and not per
instance. This means that the route-map delay timer will be global and a global
thread will handle the change (or delete) for all instances instead of spawning
a separate thread for each instance. To support this, a global BGP command
"bgp route-map delay-timer <value>" has been implemented. The existing command
per-instance is not deleted but will update the global timer.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6970, CM-9918
Reviewed By: CCR-4320
Testing Done: Manual, bgpsmoke
Code changes to make unnumbered peering work in a VRF. The changes have
to do with locating the interface in the correct VRF (in order to look for
neighbor address) in the case of outgoing connections and when specifying
source address as well as fetching the correct instance for an incoming
connection based on reading the device the socket is bound to (the multi-vrf
socket option in the kernel).
Additionally, for IPv4 unnumbered peering in a VRF (based on /30 or /31
addresses), bind to the VRF rather than the interface.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-9311
Reviewed By: CCR-4192
Testing Done: Manual, bgpsmoke
The BGP instance cleanup was deleting interfaces in that instance after
prior fixes, but this ended up deleting the interface list header which
was not being re-created. Added code to re-create this at the time an
instance is created.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-9466
Reviewed By: CCR-4164
Testing Done: Manual and verified failed test
Perform interface cleanup as an instance is deleted. This takes care of the
scenario when BGP exits (or is stopped/restarted) too as instances undergo
deletion and the interface cleanup is done as the last step in that.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Fixes: 46abd3e3e6
Ticket: CM-9410
Reviewed By: CCR-4143
Testing Done: Reran failed test
Link BGP instance (Default or VRF) to the corresponding VRF structure and
modify lookup to use this. The logic is very similar to what is implemented
in zebra - the 'struct zebra_vrf' there is essentially 'struct bgp' in BGP.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-9122
Reviewed By: CCR-4102
Testing Done: Manual
With VRF support, certain objects are now maintained per BGP instance. At
exit, the list of BGP instances has to be freed only after processing the
per-instance objects.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Fixes: ad4cbda1a3
Ticket: CM-9340
Reviewed By:
Testing Done:
Various changes and fixes related to VRF registration, deletion,
BGP exit etc.
- Define instance type
- Ensure proper handling upon instance create, delete and
VRF add/delete from zebra
- Cleanup upon bgp_exit()
- Ensure messages are not sent to zebra for unknown VRFs
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-9128, CM-7203
Reviewed By: CCR-4098
Testing Done: Manual
When a BGP instance is deleted through 'no router bgp', the required
cleanup was not being performed. This is after VRF-related changes.
Fix to ensure this is taken care of.
Note: Further changes needed in this area for VRFs.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-9597
Reviewed By: CCR-4097
Testing Done: Verified failed test
While processing references to the macro PEERAF_FOREACH(), aggressive loop
optimization by gcc 4.9.x (probably 4.8 and greater) was resulting in the
generated code not checking on the index as well as eliminating some code.
This was leading to a dereference of invalid memory when a BGP peer came up.
The fix is to scrap this convoluted macro. Two other changes done are to
eliminate overloading of "afindex" and make the loop iterator an integer.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Dave Olson <olson@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-8889
Reviewed By: CCR-4018
Testing Done: Verified failure scenario
Note: This code was added as part of update-groups implementation; when
upstreaming update-groups, this patch should also be included.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-8788
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-8472
The first as-path is what the original as-path for the test, the second
is what the as-path should look like once all confed SETs and SEQs have
been removed. At the time the test was written quagga did not correctly
remove confed SETs and SEQs but whoever wrote the test didn't notice
this and assumed that the behavior they were seeing was correct so used
that output to populate the second as-path.
Now that we do correctly remove the confed parts these tests fail. So
the fix is to update the second as-path for these two tests so that they
no longer contain any confed SETs/SEQs.
BGP uses a second #define that is equal to MULTIPATH_NUM. There
is no point in having a different #define. Just consolidate.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
configuration
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Ticket: CM-8321
This allows the user to configure the peer-group as an option for the
"neighbor swpX interface" command.
{code}
!
router bgp 100
neighbor FOO peer-group
neighbor FOO remote-as external
neighbor swp1 interface
neighbor swp2 interface v6only
neighbor swp3 interface peer-group FOO
neighbor swp4 interface v6only peer-group FOO
!
address-family ipv4 unicast
neighbor FOO activate
neighbor swp1 activate
neighbor swp2 activate
exit-address-family
!
{code}
Note that if the user configures
{code}
neighbor swp5 interface
neighbor swp5 peer-group FOO
{code}
We will display that as "neighbor swp5 interface peer-group FOO". It
did not seem worth tracking that the peer-group was entered via two
lines instead of one.
During CR for nexthop upstream it was noticed that usage
of prefix2str was not consistent. This fixes this problem
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
BGP is currently displaying the in-use router-id in the config. This is
conditional on a CONFIG flag, however, that flag is set even when there
is no configured router-id and the router-id learnt from Zebra is in-use.
The CONFIG flag for router-id is redundant since there is a separate
variable for the configured value, so use that and deprecate the CONFIG
flag. This also makes BGP behave like OSPF.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-8077, CM-8220
Reviewed By: CCR-3793
Testing Done: Manual verification (in 2.5-br)
Note: Imported from 2.5-br patch bgpd-fix-router-id-config-display.patch
Modify code to recognize that we are not actually reseting the
neighbor if the user actually enters a remote-as of external->external
for a neighbor.
Ticket: CM-8100
Reviewed-by: CCR-3783
Testing: See bug
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-8122
per draft-ietf-idr-ix-bgp-route-server-09:
2.3.2.2.2. BGP ADD-PATH Approach
The [I-D.ietf-idr-add-paths] Internet draft proposes a different
approach to multiple path propagation, by allowing a BGP speaker to
forward multiple paths for the same prefix on a single BGP session.
As [RFC4271] specifies that a BGP listener must implement an implicit
withdraw when it receives an UPDATE message for a prefix which
already exists in its Adj-RIB-In, this approach requires explicit
support for the feature both on the route server and on its clients.
If the ADD-PATH capability is negotiated bidirectionally between the
route server and a route server client, and the route server client
propagates multiple paths for the same prefix to the route server,
then this could potentially cause the propagation of inactive,
invalid or suboptimal paths to the route server, thereby causing loss
of reachability to other route server clients. For this reason, ADD-
PATH implementations on a route server should enforce send-only mode
with the route server clients, which would result in negotiating
receive-only mode from the client to the route server.
This allows us to delete all of the following code:
- All XXXX_rsclient() functions
- peer->rib
- BGP_TABLE_MAIN and BGP_TABLE_RSCLIENT
- RMAP_IMPORT and RMAP_EXPORT
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com
Ticket: CM-8014
This implements addpath TX with the first feature to use it
being "neighbor x.x.x.x addpath-tx-all-paths".
One change to show output is 'show ip bgp x.x.x.x'. If no addpath-tx
features are configured for any peers then everything looks the same
as it is today in that "Advertised to" is at the top and refers to
which peers the bestpath was advertise to.
root@superm-redxp-05[quagga-stash5]# vtysh -c 'show ip bgp 1.1.1.1'
BGP routing table entry for 1.1.1.1/32
Paths: (6 available, best #6, table Default-IP-Routing-Table)
Advertised to non peer-group peers:
r1(10.0.0.1) r2(10.0.0.2) r3(10.0.0.3) r4(10.0.0.4) r5(10.0.0.5) r6(10.0.0.6) r8(10.0.0.8)
Local, (Received from a RR-client)
12.12.12.12 (metric 20) from r2(10.0.0.2) (10.0.0.2)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 8
Last update: Fri Oct 30 18:26:44 2015
[snip]
but once you enable an addpath feature we must display "Advertised to" on a path-by-path basis:
superm-redxp-05# show ip bgp 1.1.1.1/32
BGP routing table entry for 1.1.1.1/32
Paths: (6 available, best #6, table Default-IP-Routing-Table)
Local, (Received from a RR-client)
12.12.12.12 (metric 20) from r2(10.0.0.2) (10.0.0.2)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 8
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:44 2015
Local, (Received from a RR-client)
34.34.34.34 (metric 20) from r3(10.0.0.3) (10.0.0.3)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 7
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
56.56.56.56 (metric 20) from r6(10.0.0.6) (10.0.0.6)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 6
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
56.56.56.56 (metric 20) from r5(10.0.0.5) (10.0.0.5)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 5
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
34.34.34.34 (metric 20) from r4(10.0.0.4) (10.0.0.4)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 4
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
12.12.12.12 (metric 20) from r1(10.0.0.1) (10.0.0.1)
Origin IGP, metric 0, localpref 100, valid, internal, best
AddPath ID: RX 0, TX 3
Advertised to: r1(10.0.0.1) r2(10.0.0.2) r3(10.0.0.3) r4(10.0.0.4) r5(10.0.0.5) r6(10.0.0.6) r8(10.0.0.8)
Last update: Fri Oct 30 18:26:34 2015
superm-redxp-05#
BGP ORF prefix lists are in a separate namespace; this was previously
hooked up with a special-purpose AFI value. This is a little kludgy for
extension, hence this splits it off.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These are about to be touched and there's no point in other code
touching into prefix list's internas. Add some isolation.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7926
There was a crash from not NULLing out peer->hostname but I cleaned
up a bunch of other suspect ones as well.
very easy to blackhole routes.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6649
Ticket: CM-7861
Reviewed by: CCR-3651
Testing: See bug
bgp is using both bm->master and master pointers interchangebly
for thread manipulation. Since they are the same thing consolidate
to one pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7737
Reviewed-by: CCR-3611
Testing: See bug
When configuring a bgp peer that already has some config hung off of it,
such as 'interface v6only' and then configuring remote-as internal/external
will not cause the config to be taken.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
As part of the debian build process for jessie we are seeing
some compile issues. This addresses these issues
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
bgp is using both bm->master and master pointers interchangebly
for thread manipulation. Since they are the same thing consolidate
to one pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
zclient.c depended upon link time inclusion of a
extern struct thread_master *master. This is a violation of the
namespace of the calling daemon. If a library needs the pointer
pass it in and save it for future use.
This code change also makes the zclient code consistent with
the other lib functions that need to schedule work on your behalf
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch adds a hostname capability. The node's hostname and
domainname are exchanged in the new capability and used in show command
outputs based on a knob enabled by the user. The hostname and domainname
can be a maximum of 64 chars long, each.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Ticket: CM-5660
Reviewed By: CCR-2563
Testing Done:
Ticket: CM-7012
Reviwed by: CCR-3451
Testing: See bug
When you specify a neighbor <interface> <something>
and don't specify a remote-as the neighbor relationship
will still come up with ipv6 unnumbered if you have
RA configured on the interface.
Ticket: CM-4109
Reviewed-by: CCR-3414
Testing: See bug
Fixup of these memory issues:
(A) peer->clear_node_queue was accidently removed. Add back in.
(B) Clean up bm->process_main_queue and bm->process_rsclient_queue initialization
(C) Some memory leaks
(D) Clean up unused threads
Ticket: CM-6369
Reviewed By: CCR-3318
Testing Done: Manual testing of various password scenarios.
This is a port of patch bgpd-unnumbered-nbr-fix-password.patch from
2.5-br.
In the case of BGP unnumbered, the peer IP address is derived and not
explicitly configured. If there is a password configured for the peer,
it can be set on the listen socket only after the IP address has been
derived and needs to be cleared when the IP address goes away.
Ticket: CM-6517
Reviewed By: Trivial
Testing Done: Manual testing in 2.5-br
This commit is a port of the patch bgpd-dynamic-nbr-fix-config-error.patch
from 2.5-br.
Ticket: CM-6192
Reviewed By: Donald, Daniel, Vipin
Testing Done:
In the presence of an IPv4 address that is not a /30 or /31 and the user
is trying to use BGP unnumbered, a warning message is printed which
seems confusing to the user. Fixing the warning message to indicate that
its only a v4 session isn't coming up makes it clearer.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Acked-by: Daniel Walton <dwalton@cumulusnetworks.com>
Acked-by: Vipin Kumar <vipin@cumulusnetworks.com>
Ticket:CM-6534
Reviewed by:CCR-3239
Testing: See Bug
Dynamic neighbors did not work properly with multiple bgp instances.
This was caused by the lookup for the dynamic range attempting to
break out of two for loops at the same time. The break only stopped
the innermost for loop, causing it to only ever find the listen-range
for the last instance in the bm->bgp list.
Additional bug fix for dynamic listen for peer groups that are configured
with internal or external key word.
Ticket: CM-7177
Reviewed-by: CCR-3396
Testing: See bug
This code change does several small things:
(A) Fix a couple detected memory leaks
(B) Fix all malloc operations to use the correct XMALLOC operation in bgpd and parts of lib
(C) Adds a few new memory types to make it easier to detect issues
Ticket: CM-6789
Reviewed By: CCR-3263
Testing Done: Manual Testing and smoke tests
Whenever some sort of output is encountered, added a json version with
proper logic as well.
When deleting a set of peers, the peer->group pointer was being set to NULL
and then passed into peer_delete.
peer_delete has functionality to safely remove the peer->group structure if it
non-null and to remove the peer->group if it's refcnt reaches zero.
This is a day one bug in the quagga source tree.
OSPF BFD command enhancement to configure BFD parameters (detect multiplier, min rx and min tx).
interface <if-name>
ip ospf bfd <detect mult> <min rx> <min tx>
This patch also adds BFD support for IPv6 OSPF. ospf6d will dynamically register/deregister IPv6 neighbors with BFD for monitoring the connectivity of the neighbor. Neighbor is registered with BFD when 2-way adjacency is established and deregistered when adjacency goes down if the BFD is enabled on the interface through which the neighbor was discovered.
OSPF6 BFD command added to configure BFD and parameters (detect multiplier, min rx and min tx).
interface <if-name>
ipv6 ospf6 bfd <detect mult> <min rx> <min tx>
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Kanna Rajagopal <kanna@cumulusnetworks.com>
BGP: Determine peer's IP address if interface has /30, /31
Allow interface-based session config for IPv4 numbered links
if the link address is either /30 or /31. This is not RFC5549,
but can be deployed now, and independent of whether the peer
supports RFC5549 or not.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-By: Vivek Venkataram <vivek@cumulusnetworks.com>
deleted from the listen socket in some situations. This would lead
to incorrect behavior where a BGP connection from a peer that does
not specify the MD5 option would be accepted.
This patch also adds BFD multihop support for BGP. Whether a peer is multi-hop or single hop is determined internally. All IGP peers are considered as multi-hop peers. EBGP peers are considered as single hop unless configured as multi-hop.
BGP BFD command enhancement to configure BFD parameters (detect multiplier, min rx and min tx).
router bgp <as-number>
neighbor <name/ip-address> bfd <detect mult> <min rx> <min tx>
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Kanna Rajagopal <kanna@cumulusnetworks.com>
"bgp confederation id X" are the same value.
router bgp 1
bgp router-id 10.1.1.1
bgp confederation identifier 1
bgp confederation peers 24 35
neighbor 10.1.1.2 remote-as 24
neighbor 10.1.1.2 update-source lo
neighbor 10.1.1.3 remote-as 1
neighbor 10.1.1.3 update-source lo
The customer does this because they want to peer to 10.1.1.2 as a
confed-external peer but peer with 10.1.1.3 as a normal iBGP peer.
The bug was that we thought 10.1.1.3 was an EBGP peer so we did not send him
LOCALPREF which caused the Juniper to send us a NOTIFICATION. I confirmed
that quagga also sends a NOTIFICATION in this scenario.
The fix is to add a check to see if router bgp X and bgp confederation
identifier X are equal because that is a factor in determining if a peer is
EBGP or IBGP
Additional issues fixed in the this patch:
We were not properly removing all AS_CONFED_SEQUENCEs/SETs from the aspath
when advertising a route to an ebgp peer. This was due to two issues:
We only called aspath_delete_confed_seq() if confederations were
configured. We can RX as aspath with CONFED segments even if
confederations are not configured.
aspath_delete_confed_seq() was implemented based on the original confed
RFC 3065 which basically said "remove all of the leading
AS_CONFED_SEQUENCEs/SETs" where the new confed RFC 5065 says "remove ALL
of the AS_CONFED_SEQUENCEs/SETs"
peer-groups did not work for confed-external peers. peer_calc_sort() always
returned BGP_PEER_EBGP for a confederations where the remote-as was not
specified. The reason was the peer->as_type was AS_UNSPECIFIED but we checked
if (peer->as_type != AS_SPECIFIED)
return (peer->as_type == AS_INTERNAL ? BGP_PEER_IBGP : BGP_PEER_EBGP);
After fixing that I found that when we got to the else where we checked for
peer1 we could only possibly return BGP_PEER_IBGP or BGP_PEER_EBGP, we need
to also be able to return BGP_PEER_CONFED. I changed this to return
peer1->sort.
"show ip bgp x.x.x.x" would always display "Local" for the aspath. This is
because we were calling aspath_counts_hop() to determine if the aspath was
empty. This is wrong though because CONFED segments do not count towards
aspath hopcount. The fix is to null check aspath->segments to determine if
the aspath is actually empty.
"show ip bgp x.x.x.x" and "show ip bgp neighbor" always displayed
"internal" or "external" and never "confed-internal" or "confed-external".
This made troubleshooting difficult because I couldn't tell exactly what
kind of peer I was dealing with. I added the confed-internal and
confed-external output...also added a "peer-type" field in the json output
for 'show ip bgp x.x.x.x'
"show ip bgp peer-group" did not list the peer-group name if we hadn't
determined the "type" (internal, external, etc) for the peer-group
This adds support for BGP RFC 5549 (Extended Next Hop Encoding capability)
* send and receive of the capability
* processing of IPv4->IPv6 next-hops
* for resolving these IPv6 next-hops, itsworks with the current
next-hop-tracking support
* added a new message type between BGP and Zebra for such route
install/uninstall
* zserv side of changes to process IPv4 prefix ->IPv6 next-hops
* required show command changes for IPv4 prefix having IPv6 next-hops
Few points to note about the implementation:
* It does an implicit next-hop-self when a [IPv4 prefix -> IPv6 LL next-hop]
is to be considered for advertisement to IPv4 peering (or IPv6 peering
without Extended next-hop capability negotiated)
* Currently feature is off by default, enable it by configuring
'neighbor <> capability extended-nexthop'
* Current support is for IPv4 Unicast prefixes only.
IMPORTANT NOTE:
This patch alone isn't enough to have IPv4->IPv6 routes installed into
the kernel. A separate patch is needed for that to work for the netlink
interface.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Vivek Venkatraman <vivek@cumulusnetworks.com>
Donald Sharp <sharpd@cumulusnetworks.com>
BGP: Fix EBGP multihop transitions correctly
Since BGP connection setup has migrated to using NHT to decide when to bring a
session up, we have to handle ebgp multihop transitions correctly to ensure NHT
registrations are correctly handled.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
bgp: Fix of peer group internal and external show run output
When doing a show run for peer-groups in bgp, the remote-as was not being printed
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by:
bgpd: Exchange hostname capability and display hostnames in outputs
This patch adds a hostname capability. The node's hostname and
domainname are exchanged in the new capability and used in show command
outputs based on a knob enabled by the user. The hostname and domainname
can be a maximum of 64 chars long, each.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
bgp: Fixup of the remote-as command to allow user to not have to enter an actual as number
Signed-off-by: Donald Sharp<sharpd@cumulusnetworks.com>
Reviewed-by:
BGP: Fix network import check use with NHT instead of scanner
When next hop tracking was implemented and the bgp scanner was eliminated,
the "network import-check" command got broken. This patch fixes that
issue. NHT is used to not just track nexthops, but also the static routes
that are announced as part of BGP's network command. The routes are
registered only when import-check is enabled. To optimize performance,
we register static routes only when import-check is enabled.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
deleted while in other situations, the peer continues to exist but its
global flags have all been reset. This is incorrect, particularly for the
CONFIG_NODE flag as other parts of the code depend on this flag being set
for a configured peer. This patch ensures that the correct flags still
remain set for the peer after unbind from its peer-group.
state through bgp_ignore() as that may not do required cleanup. Instead,
define a new event handler to handle such cases, which will go through
bgp_stop(). A similar change is also done to handle the case where an
event handler fails.
Also add a couple of variables to keep track of events for a peer.
sockunion_same() and bgp_peer_conf_if_to_su_update() need to use the scope_id
field of the ipv6 address to uniquify/identify the address.
This allows sessions based on link local address when that address is not
unique across peers.
list or filter-list is applied (added or removed) against a neighbor or
peer group. This makes the behavior inline with other configuration changes
such as add or remove of route-map against a neighbor or change of other
settings such as next-hop-self or as-override.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vipin Kumar <vipin@cumulusnetworks.com>
In the data center, in conjunction with next hop propagation for features
such as announcing VIP routes to load balancers and such, it is desired to
disable the connected route check even on ebgp peers with TTL of 1. This
patch is used to disable the check for all peers instead of the peer by
peer check that is currently supported. Furthermore, the existing
disable-connected-check is different from how Cisco implements this feature.
So, we add this new flag to avoid reliance on the existing flag.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
sessions dynamically. The operator configures a range of neighbor addresses
to which peering is allowed. The ranges are configured as subnets and
multiple ranges are allowed. Each range is associated with a peer-group
so that additional parameters can be configured.
BGP neighbor sessions are dynamically created when connections are initiated
by remote neighbors whose addresses fall within a configured range. The
sessions are deleted when the BGP connection terminates.
A limit on the number of neighbors allowed from each range of addresses
can be specified.
IPv4 and IPv6 peering is supported. Over the peering, any of the address
families configured for the peer-group can be negotiated.
This patch implements the 'update-groups' functionality in BGP. This is a
function that can significantly improve BGP performance for Update generation
and resultant network convergence. BGP Updates are formed for "groups" of
peers and then replicated and sent out to each peer rather than being formed
for each peer. Thus major BGP operations related to outbound policy
application, adj-out maintenance and actual Update packet formation
are optimized.
BGP update-groups dynamically groups peers together based on configuration
as well as run-time criteria. Thus, it is more flexible than update-formation
based on peer-groups, which relies on operator configuration.
[Note that peer-group based update formation has been introduced into BGP by
Cumulus but is currently intended only for specific releases.]
From 11098af65b2b8f9535484703e7f40330a71cbae4 Mon Sep 17 00:00:00 2001
Subject: [PATCH] updgrp commits
——————————————-------------
- etc/init.d/quagga is modified to support creating separate ospf daemon
process for each instance. Each individual instance is monitored by
watchquagga just like any protocol daemons.(requires initd-mi.patch).
- Vtysh is modified to able to connect to multiple daemons of the same
protocol (supported for OSPF only for now).
- ospfd is modified to remember the Instance-ID that its invoked with. For
the entire life of the process it caters to any command request that
matches that instance-ID (unless its a non instance specific command).
Routes/messages to zebra are tagged with instance-ID.
- zebra route/redistribute mechanisms are modified to work with
[protocol type + instance-id]
- bgpd now has ability to have multiple instance specific redistribution
for a protocol (OSPF only supported/tested for now).
- zlog ability to display instance-id besides the protocol/daemon name.
- Changes in other daemons are to because of the needed integration with
some of the modified APIs/routines. (Didn’t prefer replicating too many
separate instance specific APIs.)
- config/show/debug commands are modified to take instance-id argument
as appropriate.
Guidelines to start using multi-instance ospf
---------------------------------------------
The patch is backward compatible, i.e for any previous way of single ospf
deamon(router ospf <cr>) will continue to work as is, including all the
show commands etc.
To enable multiple instances, do the following:
1. service quagga stop
2. Modify /etc/quagga/daemons to add instance-ids of each desired
instance in the following format:
ospfd=“yes"
ospfd_instances="1,2,3"
assuming you want to enable 3 instances with those instance ids.
3. Create corresponding ospfd config files as ospfd-1.conf, ospfd-2.conf
and ospfd-3.conf.
4. service quagga start/restart
5. Verify that the deamons are started as expected. You should see
ospfd started with -n <instance-id> option.
ps –ef | grep quagga
With that /var/run/quagga/ should have ospfd-<instance-id>.pid and
ospfd-<instance-id>/vty to each instance.
6. vtysh to work with instances as you would with any other deamons.
7. Overall most quagga semantics are the same working with the instance
deamon, like it is for any other daemon.
NOTE:
To safeguard against errors leading to too many processes getting invoked,
a hard limit on number of instance-ids is in place, currently its 5.
Allowed instance-id range is <1-65535>
Once daemons are up, show running from vtysh should show the instance-id
of each daemon as 'router ospf <instance-id>’ (without needing explicit
configuration)
Instance-id can not be changed via vtysh, other router ospf configuration
is allowed as before.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Summary of changes
- added an option to enable keepalive debugs for a specific peer
- added an option to enable inbound and/or outbound updates debugs for a specific peer
- added an option to enable update debugs for a specific prefix
- added an option to enable zebra debugs for a specific prefix
- combined "deb bgp", "deb bgp events" and "deb bgp fsm" into "deb bgp neighbor-events". "deb bgp neighbor-events" can be enabled for a specific peer.
- merged "deb bgp filters" into "deb bgp update"
- moved the per-peer logging to one central log file. We now have the ability to filter all verbose debugs on a per-peer and per-prefix basis so we no longer need to keep log files per-peer. This simplifies troubleshooting by keeping all BGP logs in one location. The use
r can then grep for the peer IP they are interested in if they wish to see the logs for a specific peer.
- Changed "show debugging" in isis to "show debugging isis" to be consistent with all other protocols. This was very confusing for the user because they would type "show debug" and expect to see a list of debugs enabled across all protocols.
- Removed "undebug" from the parser for BGP. Again this was to be consisten with all other protocols.
- Removed the "all" keyword from the BGP debug parser. The user can now do "no debug bgp" to disable all BGP debugs, before you had to type "no deb all bgp" which was confusing.
The new parse tree for BGP debugging is:
deb bgp as4
deb bgp as4 segment
deb bgp keepalives [A.B.C.D|WORD|X:X::X:X]
deb bgp neighbor-events [A.B.C.D|WORD|X:X::X:X]
deb bgp nht
deb bgp updates [in|out] [A.B.C.D|WORD|X:X::X:X]
deb bgp updates prefix [A.B.C.D/M|X:X::X:X/M]
deb bgp zebra
deb bgp zebra prefix [A.B.C.D/M|X:X::X:X/M]
- Schedule write thread for advertisements and withdraws only if corresponding
FIFOs are growing and/or upon work_queue getting fully processed.
- Set non-default yield time for the main work_queue, as the default value
of 10ms results in yielding after processing very few nodes.
- Remove unnecessary scheduling of write thread when update packet is formed.
- If MRAI is 0, don't start a timer unnecessarily, directly schedule write
thread.
- Some debugs.
protocols. BGP and OSPF are integrated to respond this BFD session down message
originated in Zebra via ptmd.
BGP and OSPF now have a bfd command, which tells OSPF/BGP to respond to the
BFD session down message.
OSPF:
interface <>
ip ospf bfd
BGP:
router bgp <>
neighbor <> bfd
Please note that these commands don't enable BFD as a protocol. BFD configuration
and paramter tuning are via BFD applicable UI.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
BGP: Reprocess the trigger points when an attached route map changes
Currently, modifications to route maps do not affect already processed
routes; they only affect new route updates. This patch addresses this
limitation.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
COMMAND:
Possible forms of the command configuration:
[no] bgp max-med administrative
[no] bgp max-med administrative <max-med-value>
[no] bgp max-med on-startup <period>
[no] bgp max-med on-startup <period> <max-med-value>
DESCRIPTION:
'administrative' takes effect from the time of the config until the config is
removed.
'on-startup' is effective only at the startup time for the given '<period>'
after the first peer is established.
'<max-med-value>' is used as the MED value to be sent out when the max-med
is effective. Default max-med value is 4294967294.
NOTE:
When max-med is active, MED is changed only in the outgoing attributes to the
peers, it doesn't modify any MED specific state of the attributes in BGP on
the local node.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
BGPd: Allow route-map policy modifications to also affect route reflectors.
By default, attribute modification via route-map policy out is ignored on
reflected routes. This patch provides an option to allow this modification
to occur. Once enabled, it affects all reflected routes.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
BGP: Fix FSM to handle active/passive connections better
The existing code didn't work well when dual connections resulted between
peers during session bringup. This patch fixes that.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
BGP: Event-driven route announcement taking into account min route advertisement interval
ISSUE
BGP starts the routeadv timer (peer->t_routeadv) to expire in 1 sec
when a peer is established. From then on, the timer expires
periodically based on the configured MRAI value (default: 30sec for
EBGP, 5sec for IBGP). At the expiry, the write thread is triggered
that takes the routes from peer's sync FIFO (adj-rib-out) and sends
UPDATEs. This has a few drawbacks:
(1) Delay in new route announcement: Even when the last UPDATE message
was sent a while back, the next route change will necessarily have
to wait for routeadv expiry
(2) CPU usage: The timer is always armed. If the operator chooses to
configure a lower value of MRAI (zero second is a preferred choice
in many deployments) for better convergence, it leads to high CPU
usage for BGP process, even at the times of no network churn.
PATCH
Make the route advertisement event-driven - When routes are added to
peer's sync FIFO, check if the routeadv timer needs to be adjusted (or
started). Conversely, do not arm the routeadv timer unconditionally.
The patch also addresses route announcements during read-only mode
(update-delay). During read-only mode operation, the routeadv timer
is not started. When BGP comes out of read-only mode and all the
routes are processed, the timer is started for all peers with zero
expiry, so that the UPDATEs can be sent all at once. This leads to
(near-)optimal UPDATE packing.
Finally, the patch makes the "max # packets to write to peer socket at
a time" configurable. Currently it is hard-coded to 10. The command is
at the top router-bgp mode and is called "write-quanta <number>". It
is a useful convergence parameter to tweak.
Signed-off-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
COMMAND:
table-map <route-map-name>
DESCRIPTION:
This feature is used to apply a route-map on route updates from BGP to Zebra.
All the applicable match operations are allowed, such as match on prefix,
next-hop, communities, etc. Set operations for this attach-point are limited
to metric and next-hop only. Any operation of this feature does not affect
BGPs internal RIB.
Supported for ipv4 and ipv6 address families. It works on multi-paths as well,
however, metric setting is based on the best-path only.
IMPLEMENTATION NOTES:
The route-map application at this point is not supposed to modify any of BGP
route's attributes (anything in bgp_info for that matter). To achieve that,
creating a copy of the bgp_attr was inevitable. Implementation tries to keep
the memory footprint low, code comments do point out the rationale behind a
few choices made.
bgp_zebra_announce() was already a big routine, adding this feature would
extend it further. Patch has created a few smaller routines/macros whereever
possible to keep the size of the routine in check without compromising on the
readability of the code/flow inside this routine.
For updating a partially filtered route (with its nexthops), BGP to Zebra
replacement semantic of the next-hops serves the purpose well. However, with
this patch there could be some redundant withdraws each time BGP announces a
route thats (all the nexthops) gets denied by the route-map application.
Handling of this case could be optimized by keeping state with the prefix and
the nexthops in BGP. The patch doesn't optimizing that case, as even with the
redundant withdraws the total number of updates to zebra are still be capped
by the total number of routes in the table.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
COMMAND:
'update-delay <max-delay in seconds> [<establish-wait in seconds>]'
DESCRIPTION:
This feature is used to enable read-only mode on BGP process restart or when
BGP process is cleared using 'clear ip bgp *'. When applicable, read-only mode
would begin as soon as the first peer reaches Established state and a timer
for <max-delay> seconds is started.
During this mode BGP doesn't run any best-path or generate any updates to its
peers. This mode continues until:
1. All the configured peers, except the shutdown peers, have sent explicit EOR
(End-Of-RIB) or an implicit-EOR. The first keep-alive after BGP has reached
Established is considered an implicit-EOR.
If the <establish-wait> optional value is given, then BGP will wait for
peers to reach establish from the begining of the update-delay till the
establish-wait period is over, i.e. the minimum set of established peers for
which EOR is expected would be peers established during the establish-wait
window, not necessarily all the configured neighbors.
2. max-delay period is over.
On hitting any of the above two conditions, BGP resumes the decision process
and generates updates to its peers.
Default <max-delay> is 0, i.e. the feature is off by default.
This feature can be useful in reducing CPU/network used as BGP restarts/clears.
Particularly useful in the topologies where BGP learns a prefix from many peers.
Intermediate bestpaths are possible for the same prefix as peers get established
and start receiving updates at different times. This feature should offer a
value-add if the network has a high number of such prefixes.
IMPLEMENTATION OBJECTIVES:
Given this is an optional feature, minimized the code-churn. Used existing
constructs wherever possible (existing queue-plug/unplug were used to achieve
delay and resume of best-paths/update-generation). As a result, no new
data-structure(s) had to be defined and allocated. When the feature is disabled,
the new node is not exercised for the most part.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Dinesh Dutt <ddutt@cumulusnetworks.com>
ISSUE:
Quagga BGP doesn't send or use the restart-bit via the Graceful-Restart(GR)
capability. GR capability implementation isn't complete as per the RFC.
PATCH:
Patch uses BGP instance creation as the beginning of the startup period,
and 'restart_time' is taken as the startup period. As a result, BGP will
set the restart bit in the GR capability of the OPEN messages during the
startup period.
As an indication of quagga implementation's capability of sending End-Of-RIB,
helping a restarting neighbor, quagga BGP will now send global GR capability
irrespective of the graceful-restart config in BGP and the address-family
specific GR capability will be sent only if the GR config is present.
Forwarding bit is not set assuming its not preserved.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Quagga sources have inherited a slew of Page Feed (^L, \xC) characters
from ancient history. Among other things, these break patchwork's
XML-RPC API because \xC is not a valid character in XML documents.
Nuke them from high orbit.
Patches can be adapted simply by:
sed -e 's%^L%%' -i filename.patch
(you can type page feeds in some environments with Ctrl-V Ctrl-L)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When allowas-in is changed on a peer that is not up, BGP would crash
trying to do route_refresh. If peer is not up, there is no need
to do notification or send.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Feng Lu <lu.feng@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
ISSUE:
Currently, for non-ipv4-unicast address families where prefixes are
encoded in MP_REACH/MP_UNREACH attributes, BGP ends up sending one
prefix per UPDATE message. This is quite inefficient. The patch
addresses the issue.
PATCH:
We introduce a scratch buffer in the peer structure that stores the
MP_REACH/MP_UNREACH attributes for non-ipv4-unicast families. This
enables us to encode multiple prefixes. In the end, the two buffers
are merged to create the UPDATE packet.
Signed-off-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
[DL: removed no longer existing bgp_packet_withdraw prototype]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Traditionally, ttl-security feature has been associated with EBGP
sessions as those identify directly connected external peers. The
GTSM RFC (rfc 5082) does not make any restrictions on type of
peering. In fact, it is beneficial to support ttl-security for both
EBGP and IBGP sessions. Specifically, in data centers, there are
directly connected IBGP peerings that will benefit from the protection
ttl-security provides.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
[DL: function refactoring split out into previous 2 patches. changes:
- bgp_set_socket_ttl(): ret type int -> void
- is_ebgp_multihop_configured(): stripped peer == NULL check
- comments/whitespace]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The check for an eBGP multihop configuration is unwieldy; factor it out
into a separate function.
[DL: originally by Dinesh G Dutt <ddutt@cumulusnetworks.com>,
split off from the next commit]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The issue it fixes is that the notification message is not sent to a
second peer when bgp is stopped manually.
According to BGP RFC4271, section 8.2.2, regarding the FSM transitions,
in OpenSent state:
If a ManualStop event (Event 2) is issued in the OpenSent state, the
local system:
* sends the NOTIFICATION with a Cease,
* sets the ConnectRetryTimer to zero,
* releases all BGP resources,
* drops the TCP connection,
* sets the ConnectRetryCounter to zero, and
* changes its state to Idle.
I've added a check for OpenSent state when the notification is sent from
the functions which are called from the CLI commands which
directly/indirectly stop/restart BGP.
Acked-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Compute multipath in BGP based on AS_PATH hop count match. If the knob
is turned on, it is not required to have an exact match of AS_PATHs
(provided other multipath conditions are met, of course).
Signed-off-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This patch resolves the significance of order of group and password
statements.
It prevents passwords from being lost in cases where all
three conditions apply:
1. the peer is member of a group with or without group password
2. the peer has an individual password set
3. the peer is added to a group within an address-family ipv6
section
In addition this patch prevents the same issue in cases, where an IPv4
peer's password is set first and the peer is added to a group
afterwards.
Adding a peer to a group cancels his individual password. Without ipv6
this is not a problem, because choosing the right order of config
statements will do (set password only after adding peer to group).
When adding the peer to a group within the address-family
section, his password is definitely lost. The same workaround (ie.
setting the password after the address-family section) can not be used,
because "show run" will print the configuration statements in the wrong
order.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If a neighbor was in a peer group for any AFI/SAFI, bgpd would never write a
"no neighbor activate" line for IPv4 unicast, so a valid setup like following
could be configured, but not saved:
router bgp 64600
bgp router-id 198.51.100.1
network 198.51.100.0/24
neighbor peers peer-group
neighbor 2001:db8::2 remote-as 64601
no neighbor 2001:db8::2 activate
!
address-family ipv6
network 2001:db8:1::/48
neighbor peers activate
neighbor peers soft-reconfiguration inbound
neighbor 2001:db8::2 peer-group peers
exit-address-family
!
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Added replace-as modifier for BGP neighbors when using
local-as. If the replace-as modifier is specified, only the
replacement AS as specified by the local-as modifier is
prepended to the AS_PATH, not the process's AS.
In bgp_attr.c, I decided that
if (peer->change_local_as) {
/* If replace-as is specified, we only use the change_local_as when
advertising routes. */
if( ! CHECK_FLAG (peer->flags, PEER_FLAG_LOCAL_AS_REPLACE_AS) ) {
aspath = aspath_add_seq (aspath, peer->local_as);
}
aspath = aspath_add_seq (aspath, peer->change_local_as);
} else {
aspath = aspath_add_seq (aspath, peer->local_as);
}
was clearer than the alternative that didn't duplicate the prepending of the
process's AS:
/* First, append the process local AS unless we have an alternate local_as
* and we're replacing it (as opposed to just prepending it). */
if (! (peer->change_local_as
&& CHECK_FLAG (peer->flags, PEER_FLAG_LOCAL_AS_REPLACE_AS) ) ) {
aspath = aspath_add_seq (aspath, peer->local_as);
}
if (peer->change_local_as)
aspath = aspath_add_seq (aspath, peer->change_local_as);
}
But I could be convinced otherwise.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd.h: add a BGP_OPT_NO_LISTEN option for the master BGP configuration,
to prevent any listen socket being created automatically. Allows code
to be used outside of BGP daemon settings.
* bgpd.c: (bgp_get) honour above the flag, suppress auto-creation of listen
socket on first BGP instance if set.
(bgp_option_set) whitelist BGP_OPT_NO_LISTEN
peer_sort() it's called so much as to be annoying. In the assumption
that the 'sort' of the peer doesn't change during an established session,
I have changed all calls to peer_sort() in the 'fast-path' to only check
the 'sort'. All the calls from the vty and such still recalculate the sort
and store it in the peer.
There's a lot of other calls to peer_sort() that could be changed but some
maube tricky, someone more knowledgeable may try to reduce them.
This hits peer_sort() from 5th out of the stadium^H^H list on a full
internet table loading profiling session.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This function scores 2nd, profiling a full internet table load. It's called
for every prefix received.
Instead of looping in the interface lists comparing addresses use a hash
to mantain them.
* bgpd.c: Init the own address hash.
* bgp_nexthop.c: Introduce methods to maintain an own address hash.
(bgp_connected_add) add addresses to the hash.
(bgp_connected_delete) delete addresses from the hash.
(bgp_nexthop_self) lookup addresses in the hash. Removed the unused afi_t
parameter.
* bgp_route.c: (bgp_update_main) Micro-optimization, rearranged condition to
not lookup the hash for bogus nexthops (0.0.0.0 or a class D/E address)
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* Separate out BGP socket initialisation from bgp_get, and make it an
explicit function. Allows unit tests to work again and probably also
benefits dry-run.
* bgpd.c: (bgp_get) move socket init out...
(bgp_socket_init) to here
* bgp_main.c: and call it after dry-run.
* bgpd.h: (bgp_socket_init) add prototype
* (general) Move functions in headers into files, to be compiled into
shared object files. Remove inline qualifier from functions. Let the
compiler do the work.
- SAFI value 3 is reserved. It was assigned by RFC 2858 for a use
that was never fully implemented, so it is deprecated by this
document.
* zebra.h: rename macro
* bgp_fsm.c: (bgp_graceful_restart_timer_expire,
bgp_graceful_stale_timer_expire, bgp_stop, bgp_establish): update
* bgpd.c: (peer_nsf_stop): update
* bgp_open.c: (bgp_capability_vty_out): SAFI 3 isn't a recognized case
any more
There is support to configure this for each (AFI,SAFI), but
currently this configuration is only present for IPv4 unicast:
maximum-paths [ibgp] <1-255>
no maximum-paths [ibgp] [<1-255>]
* bgpd/Makefile.am
* Add bgp_mpath.h and bgp_mpath.c to build
* bgpd/bgp_mpath.h
* New file for bgp multipath declarations
* define BGP_DEFAULT_MAXPATHS
* bgpd/bgp_mpath.c
* bgp_maximum_paths_set(): Configure maximum paths for the given
afi, safi and bgp instance
* bgp_maximum_paths_unset(): Return maximum paths configuration to
the default setting for the given afi, safi and bgp instance
* bgpd/bgp_vty.c
* Define command strings for above CLI
* bgp_config_write_maxpaths(): Outputs configuration for the given
afi, safi and bgp instance
* Install command elements for IPv4 unicast
* bgpd/bgp_zebra.h
* bgp_config_write_maxpaths(): External declaration
* bgpd/bgpd.c
* bgp_create(): Initialize bgp instance to default maximum paths setting
* bgp_config_write_family(): Output maximum paths configuration
for the given address family
* bgp_config_write(): Output maximum paths configuration for
IPv4 unicast address family
* bgpd/bgpd.h
* struct bgp: Add storage for maximum paths configuration for
each afi, safi
* bgpd.h: Add error code for setting GTSM on iBGP
* bgpd.c: (peer_ttl_security_hops_set) use previous error code and signal
incompatibility of GTSM+iBGP to vty.
Consider the session state when setting GTSM, and reset Open/Active peers
to let them pick up new TTL from start.
* bgp_vty.c: (peer_ebgp_multihop_{un,}set_vty) tail-call cleanup.
({no_,}neighbor_ttl_security) ditto.
* bgpd.c: (peer_ttl_security_hops_set) Peer group checks and TTL set only
need to be done on transition.
* sockunion.c: (sockopt_minttl) remove always-on debug and improve readability.
* bgpd: Add support for RFC 5082 GTSM, which allows the TTL field to be used
to verify that incoming packets have been sent from neighbours no more
than X IP hops away. In other words, this allows packets that were sent from
further away (i.e. not by the neighbour with known distance, and so possibly
a miscreant) to be filtered out.
* lib/sockunion.{c,h}: (sockopt_minttl) new function, to set a minimum TTL
using the IP_MINTTL socket opt.
* bgpd.h: (BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK) define for command
error for minttl.
(struct peer) add a config variable, to store the configured minttl.
(peer_ttl_security_hops_{set,unset}) configuration handlers
* bgpd.c: (peer_group_get) init gtsm_hops
(peer_ebgp_multihop_{un,}set) check for conflicts with GTSM. Multihop and
GTSM can't both be active for a peer at the same time.
(peer_ttl_security_hops_set) set minttl, taking care to avoid conflicts with
ebgp_multihop.
(bgp_config_write_peer) write out minttl as "neighbor .. ttl-security hops X".
* bgp_vty.c: (bgp_vty_return) message for
BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK
(peer_ebgp_multihop_{un,}set_vty)
* bgp_network.c: (bgp_accept) set minttl on accepted sockets if appropriate.
(bgp_connect) ditto for outbound.
BGP uses time() to get system time of day; but that value
fluctuates with time adjustments from NTP. This can cause premature
flapping of peer sessions and other failures.
Use the system monotonic clock supported by Quagga thread library
to avoid issue.
See: http://bugzilla.vyatta.com/show_bug.cgi?id=4467
* bgpd/bgp_fsm.c
* bgp_uptime_reset(): dismiss function
* bgpd/bgpd.c
* bgp_clock(): new function
* bgpd/bgp_damp.c
* bgp_reuse_timer(): employ bgp_clock() instead of time(NULL)
* bgp_damp_withdraw(): idem
* bgp_damp_update(): idem
* bgp_damp_scan(): idem
* bgp_damp_info_vty(): idem
* bgp_damp_reuse_time_vty(): idem
* bgpd/bgp_fsm.c
* bgp_routeadv_timer(): idem
* bgp_stop(): idem
* bgp_establish(): idem
* bgpd/bgp_packet.c
* bgp_update_receive(): idem
* bgpd/bgp_route.c
* bgp_update_rsclient(): idem
* bgp_update_main(): idem
* bgp_static_update_rsclient(): idem
* bgp_static_update_main(): idem
* bgp_static_update_vpnv4(): idem
* bgp_aggregate_route(): idem
* bgp_aggregate_add(): idem
* bgp_redistribute_add(): idem
* bgpd/bgp_snmp.c
* bgpPeerTable(): idem
* bgpTrapEstablished(): idem
* bgpTrapBackwardTransition(): idem
* bgpd/bgpd.c
* peer_create(): idem
* peer_uptime(): idem
* bgp_master_init(): idem
* bgpd/bgp_aspath.c
* ashash: only used in one file, make static
* aspath_count_numas(): dead code, sayonara
* bgpd/bgpd.c
* peer_nsf_stop(): only used in one file, make static
* bgpd/bgp_packet.h
* bgp_capability_receive(): add missing prototype for a
global function
* bgpd.c: (peer_lookup_with_open) Bodged application of previous patch
meant the second loop around bgp->peer wasn't included in the loop
around bm->bgp as it was supposed to be. Fix..
* bgpd.c: (peer_lookup) Search through all BGP instances for matches, not just
the default instance, if no specific instance is given.
(peer_lookup_with_open) same.
Start BGP listener only after first instance is started. This helps the
security if BGP is not used but daemon is started. It also addresses some
issues like MD5 not working on listener unless IPV6 configured (because
listener was not in list); as well as compiler warnings.
* bgp_network.c: (bgp_listener) listen socket creation consolidated here
(bgp_socket) Use bgp_listener
* bgpd.c: (bgp_get) call bgp_socket on creation of first struct bgp.
(bgp_init) remove bgp_socket call.
* memtypes.c: Add MTYPE_BGP_LISTENER
I've spent the last several weeks working on stability fixes to bgpd.
These patches fix all of the numerous crashes, assertion failures, memory
leaks and memory stomping I could find. Valgrind was used extensively.
Added new function bgp_exit() to help catch problems. If "debug bgp" is
configured and bgpd exits with status of 0, statistics on remaining
lib/memory.c allocations are printed to stderr. It is my hope that other
developers will use this to stay on top of memory issues.
Example questionable exit:
bgpd: memstats: Current memory utilization in module LIB:
bgpd: memstats: Link List : 6
bgpd: memstats: Link Node : 5
bgpd: memstats: Hash : 8
bgpd: memstats: Hash Bucket : 2
bgpd: memstats: Hash Index : 8
bgpd: memstats: Work queue : 3
bgpd: memstats: Work queue item : 2
bgpd: memstats: Work queue name string : 3
bgpd: memstats: Current memory utilization in module BGP:
bgpd: memstats: BGP instance : 1
bgpd: memstats: BGP peer : 1
bgpd: memstats: BGP peer hostname : 1
bgpd: memstats: BGP attribute : 1
bgpd: memstats: BGP extra attributes : 1
bgpd: memstats: BGP aspath : 1
bgpd: memstats: BGP aspath str : 1
bgpd: memstats: BGP table : 24
bgpd: memstats: BGP node : 1
bgpd: memstats: BGP route : 1
bgpd: memstats: BGP synchronise : 8
bgpd: memstats: BGP Process queue : 1
bgpd: memstats: BGP node clear queue : 1
bgpd: memstats: NOTE: If configuration exists, utilization may be expected.
Example clean exit:
bgpd: memstats: No remaining tracked memory utilization.
This patch fixes bug #397: "Invalid free in bgp_announce_check()".
This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c:
bgp_clear_route_node()".
My apologies for not separating out these changes into individual patches.
The complexity of doing so boggled what is left of my brain. I hope this
is all still useful to the community.
This code has been production tested, in non-route-server-client mode, on
a linux 32-bit box and a 64-bit box.
Release/reset functions, used by bgp_exit(), added to:
bgpd/bgp_attr.c,h
bgpd/bgp_community.c,h
bgpd/bgp_dump.c,h
bgpd/bgp_ecommunity.c,h
bgpd/bgp_filter.c,h
bgpd/bgp_nexthop.c,h
bgpd/bgp_route.c,h
lib/routemap.c,h
File by file analysis:
* bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released.
* bgpd/bgp_attr.c: #if removed uncalled cluster_dup().
* bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from
bgp_exit().
* bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and
also fix memory leak.
* bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees
allocations made as part of bgpd initialization and, to some extent,
configuration. If "debug bgp" is configured, memory stats are printed
as described above.
* bgpd/bgp_nexthop.c: zclient_new() already allocates stream for
ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so
zlookup is global so bgp_exit() can use it.
* bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route()
adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag.
* bgpd/bgp_route.h: Correct reference counter "lock" to be signed.
bgp_clear_route() now accepts a bgp_clear_route_type of either
BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT.
* bgpd/bgp_route.c:
- bgp_process_rsclient(): attr was being zero'ed and then
bgp_attr_extra_free() was being called with it, even though it was
never filled with valid data.
- bgp_process_rsclient(): Make sure rsclient->group is not NULL before
use.
- bgp_processq_del(): Add call to bgp_table_unlock().
- bgp_process(): Add call to bgp_table_lock().
- bgp_update_rsclient(): memset clearing of new_attr not needed since
declarationw with "= { 0 }" does it. memset was already commented
out.
- bgp_update_rsclient(): Fix screwed up misleading indentation.
- bgp_withdraw_rsclient(): Fix screwed up misleading indentation.
- bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also
free struct bgp_clear_node_queue used for work item.
- bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in
case peer is released by peer_unlock() call.
- bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use
struct bgp_clear_node_queue to supply data to worker. Add call to
bgp_table_lock().
- bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or
BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL.
Bug 397 fixes:
- bgp_default_originate()
- bgp_announce_table()
* bgpd/bgp_table.h:
- struct bgp_table: Added reference count. Changed type of owner to be
"struct peer *" rather than "void *".
- struct bgp_node: Correct reference counter "lock" to be signed.
* bgpd/bgp_table.c:
- Added bgp_table reference counting.
- bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if
set.
- bgp_unlock_node(): Added assertion.
- bgp_node_get(): Added call to bgp_lock_node() to code path that it was
missing from.
* bgpd/bgp_vty.c:
- peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment
to owner. Handle failure gracefully.
- peer_rsclient_unset_vty(): Add call to bgp_clear_route() with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
* bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it.
* bgpd/bgpd.c:
- peer_lock(): Allow to be called when status is "Deleted".
- peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to
bgp_clear_route() call.
- peer_delete(): Common variable listnode pn. Fix bug in which rsclient
was only dealt with if not part of a peer group. Call
bgp_clear_route() for rsclient, if appropriate, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host.
- peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host.
- bgp_delete(): Delete peers before groups, rather than after. And then
rather than deleting rsclients, verify that there are none at this
point.
- bgp_unlock(): Add assertion.
- bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself.
* lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed
massive leak in install_element() in which cmd_make_descvec() was being
called more than once for the same cmd->strvec/string/doc.
* lib/log.c: Make closezlog() check fp before calling fclose().
* lib/memory.c: Catch when alloc count goes negative by using signed
counts. Correct #endif comment. Add log_memstats_stderr().
* lib/memory.h: Add log_memstats_stderr().
* lib/thread.c: thread->funcname was being accessed in thread_call() after
it had been freed. Rearranged things so that thread_call() frees
funcname. Also made it so thread_master_free() cleans up cpu_record.
* lib/vty.c,h: Use global command_cr. Add vty_terminate().
* lib/zclient.c,h: Re-enable zclient_free().
* bgpd.c: Removal of (struct bgp *) from the master list was being left to
bgp_free time. This meant there was a window of time between bgp_delete
and refcounts hitting 0 (e.g. routes to be processed) where bgp_lookup's
could return a deleted (struct bgp *).
(bgp_delete) This is the logical place where a (struct bgp *) should lose
its visibility, so move the deletion from the bgp-master list to here,
from bgp_free.
Many thanks to Fritz Reichmann for his thorough debugging of the problem
and testing of fixes and Chris Caputo for his further analysis.
When a BGP instance is deleted with lots of routes and neighbors
it is possible for the peer rsclient queue to run after
bgp_delete has been called. This would lead to bgpd crashing,
see https://bugzilla.vyatta.com/show_bug.cgi?id=3436
The fix is to add reference counting to the BGP instance and defer
actual freeing until all references are gone.
This patch also fixes a memory leak where the self-reference
peer instance was being created but never freed.
The check in bgp_clear_route is no longer valid because it is possible
for it to be called when peer is in Deleted state during cleanup.
* lib/workqueue.c: free-ing workqueues had never been tested obviously,
queue's thread was not being stopped
* bgpd/bgpd.c: null out freed workqueues, to prevent acting on freed
workqueues
* bgpd/bgp_aspath.c: (aspath_make_str_count) "assert (len < str_size)" was
getting hit under certain 4-byte ASN conditions. New realloc strategy.
* bgpd/bgp_aspath.c: (aspath_key_make) const warning fix.
"%d" -> "%u" 4-byte ASN corrections. Prevent negative number when ASN is
above 2^31.
2007-08-31 Paul Jakma <paul.jakma@sun.com>
* (general) Add 'bgp open-accept' option, to allow bgpd to send OPEN
on accepted connections, i.e. to not wait till after
collision-detect to send OPEN, which appears to be allowed in
RFC4271. This may help speed up establishing sessions, or help
avoid FSM problems with sessions to certain peers. Not enabled by
default though.
2008-07-21 Paul Jakma <paul.jakma@sun.com>
* bgp_packet.c: (bgp_open_receive) fix warning in a zlog call
* bgp_vty.c: (bgp_vty_return) add return code
* bgpd.c: (bgp_master_init) setup the socket list.
* bgp_network.c: Remove the dual IPv4/6 socket thing for now, which
was implemented by Michael, until such time as its clear its
required for Linux (see sockopt comments). IPv6 support, including
IPv4 sessions on AF_INET6 sockets, therefore is broken, and the
'-l 0.0.0.0' arguments would need to be given to bgpd to make
things work here.
2008-07-21 Michael H. Warfield <mhw@wittsend.com>
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Tomohiko Kusuda <kusuda@inetcore.com>
Leigh Brown <leigh@solinno.co.uk>
* bgp_network.c: (bgp_md5_set_one) shim between libzebra tcp-md5
sockopt and bgpd.
(bgp_md5_set_socket) Helper for bgp_connect
(bgp_md5_set) setup TCP-MD5SIG for the given peer.
(bgp_connect) call out to bgp_md5_set_socket for the outgoing
connect socket.
(bgp_socket) save references to the listen sockets, needed if
TCP-MD5SIG is applied later or changed.
* bgp_vty.c: (*neighbor_password_cmd) New 'neighbor ... password'
commands.
* bgpd.c: (peer_{new,delete) manage TCP-MD5 password
(peer_group2peer_config_copy) inherit TCP-MD5 password
(peer_password_{un,}set) orchestrate the whole add/remove of TCP-MD5
passwords: applying checks, stopping peers, and trying to return
errors to UI, etc.
(bgp_config_write_peer) save password.
Fix missing newline in writeout of neighbor ... port.
2008-07-21 Paul Jakma <paul.jakma@sun.com>
* sockunion.c: ifdef out various places that converted
v4mapped sockets to pure v4. Doesn't seem necessary at all,
presumably a workaround for now historical inet_ntop bugs (?)
2008-07-21 Michael H. Warfield <mhw@wittsend.com>
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* sockopt.{c,h}: (sockopt_tcp_signature) Add TCP-MD5SIG support.
2008-07-02 Stephen Hemminger <stephen.hemminger@vyatta.com>
* bgp_table.{c,h}: (bgp_table_finish) Take a double pointer and
scrub pointer in caller, so fixing double-free crashes seen
with route-server-client configuration.
* *.c: Adjust all callers of bgp_table_finish
2008-07-02 Paul Jakma <paul.jakma@sun.com>
* bgp_table.{c,h}: (bgp_node_delete, bgp_table_free) shouldn't be
exported.
* bgp_main.c: Add 'listenon' argument, to pass address to bind
to.
* bgp_network.c: (bgp_socket) Extend to take bind address.
* bgpd.c: (bgp_init) Pass stored address.
* bgpd.h: (struct bgp_master) storage for bind address
2007-11-01 Paul Jakma <paul.jakma@sun.com>
* tools/multiple-bgpd.sh: New, quick script to launch a bunch of
bgpds.
2006-10-19 Paul Jakma <paul.jakma@sun.com>
* bgpd.c: (peer_new) bgp element of peer absolutely must be
filled in, make peer_new() require it as argument and update
all callers. Fixes a crash reported by Jan 'yanek' Bortl and
Andrew Schorr where bgpd would crash in bgp_pcount_adjust
trying to dereference the bgp member of bgp->peer_self,
triggered through redistribution.
* bgp_route.c: (bgp_pcount_adjust) assert sanity of arguments.
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* (general) fix the peer refcount issue exposed by previous, by
just removing refcounting of peer threads, which is mostly
senseless as they're references leading from struct peer,
which peer_free cancels anyway. No need to muck around..
* bgp_fsm.h: Just remove the refcounting from the various
TIMER/READ/WRITE/EVENT ON/OFF/ADD macros.
* bgp_fsm.c: (bgp_stop) use BGP_EVENT_FLUSH, no refcounts attached
to events anymore.
(bgp_event) remove peer_unlock, events not refcounted.
* bgpd.c: (peer_free) flush events before free.
2006-09-14 Paul Jakma <paul.jakma@sun.com>
* (general) Fix some niggly issues around 'shutdown' and clearing
by adding a Clearing FSM wait-state and a hidden 'Deleted'
FSM state, to allow deleted peers to 'cool off' and hit 0
references. This introduces a slow memory leak of struct peer,
however that's more a testament to the fragility of the
reference counting than a bug in this patch, cleanup of
reference counting to fix this is to follow.
* bgpd.h: Add Clearing, Deleted states and Clearing_Completed
and event.
* bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and
Deleted.
* bgp_fsm.h: Don't allow timer/event threads to set anything
for Deleted peers.
* bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted
needs to stop everything.
(bgp_stop) Remove explicit fsm_change_status call, the
general framework handles the transition.
(bgp_start) Log a warning if a start is attempted on a peer
that should stay down, trying to start a peer.
(struct .. FSM) Add Clearing_Completed
events, has little influence except when in state
Clearing to signal wait-state can end.
Add Clearing and Deleted states, former is a wait-state,
latter is a placeholder state to allow peers to disappear
quietly once refcounts settle.
(bgp_event) Try reduce verbosity of FSM state-change debug,
changes to same state are not interesting (Established->Established)
Allow NULL action functions in FSM.
* bgp_packet.c: (bgp_write) Use FSM events, rather than trying
to twiddle directly with FSM state behind the back of FSM.
(bgp_write_notify) ditto.
(bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else
this patch crashes, now it leaks instead.
* bgp_route.c: (bgp_clear_node_complete) Clearing_Completed
event, to end clearing.
(bgp_clear_route) See extensive comments.
* bgpd.c: (peer_free) should only be called while in Deleted,
peer refcounting controls when peer_free is called.
bgp_sync_delete should be here, not in peer_delete.
(peer_delete) Initiate delete.
Transition to Deleted state manually.
When removing peer from indices that provide visibility of it,
take great care to be idempotent wrt the reference counting
of struct peer through those indices.
Use bgp_timer_set, rather than replicating.
Call to bgp_sync_delete isn't appropriate here, sync can be
referenced while shutting down and finishing deletion.
(peer_group_bind) Take care to be idempotent wrt list references
indexing peers.
2006-02-21 Paul Jakma <paul.jakma@sun.com>
* bgpd.h: move the clear_node_queue to be peer specific.
Add a new peer status flag, PEER_STATUS_CLEARING.
* bgp_table.h: (struct bgp_table) Add fields to record afi,
safi of the table.
(bgp_table_init) Take afi and safi to create table for.
* bgp_table.c: (bgp_table_init) record the afi and safi.
* bgp_nexthop.c: Update all calls to bgp_table_init.
* bgp_vty.c: ditto.
* bgpd.c: ditto.
* bgp_fsm.c: (bgp_timer_set) dont bring up a session which is
clearing.
* bgp_route.c: (general) Update all bgp_table_init calls.
(bgp_process_{rsclient,main}) clear_node is serialised
via PEER_STATUS_CLEARING and fsm now.
(struct bgp_clear_node_queue) can be removed. struct bgp_node
can be the queue item data directly, as struct peer can be
kept in the new wq global user data and afi/safi can be
retrieved via bgp_node -> bgp_table.
(bgp_clear_route_node) fix to get peer via wq->spec.data,
afi/safi via bgp_node->bgp_table.
(bgp_clear_node_queue_del) no more item data to delete, only
unlock the bgp_node.
(bgp_clear_node_complete) only need to unset CLEARING flag
and unlock struct peer.
(bgp_clear_node_queue_init) queue attaches to struct peer
now. record peer name as queue name.
(bgp_clear_route_table) If queue transitions to active,
serialise clearing by setting PEER_STATUS_CLEARING rather
than plugging process queue, and lock peer while queue
active.
Update to pass only bgp_node as per-queue-item specific data.
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
* (global) The great bgpd extern and static'ification.
* bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code
(route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison
warnings.
* bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these
used by various files which had their own private declarations,
in the case of mplsvpn - incorrect.
* bgpd.c: (bgp_terminate) workqueue's are lazy allocated and its
possible to terminate bgpd before workqueues were setup, causing
an abort/crash. Reported by Ashish Mehta of Sun.
* bgpd/(general) refcount struct peer and bgp_info, hence allowing us
add work_queues for bgp_process.
* bgpd/bgp_route.h: (struct bgp_info) Add 'lock' field for refcount.
Add bgp_info_{lock,unlock} helper functions.
Add bgp_info_{add,delete} helpers, to remove need for
users managing locking/freeing of bgp_info and bgp_node's.
* bgpd/bgp_table.h: (struct bgp_node) Add a flags field, and
BGP_NODE_PROCESS_SCHEDULED to merge redundant processing of
nodes.
* bgpd/bgp_fsm.h: Make the ON/OFF/ADD/REMOVE macros lock and unlock
peer reference as appropriate.
* bgpd/bgp_damp.c: Remove its internal prototypes for
bgp_info_delete/free. Just use bgp_info_delete.
* bgpd/bgpd.h: (struct bgp_master) Add work_queue pointers.
(struct peer) Add reference count 'lock'
(peer_lock,peer_unlock) New helpers to take/release reference
on struct peer.
* bgpd/bgp_advertise.c: (general) Add peer and bgp_info refcounting
and balance how references are taken and released.
(bgp_advertise_free) release bgp_info reference, if appropriate
(bgp_adj_out_free) unlock peer
(bgp_advertise_clean) leave the adv references alone, or else
call bgp_advertise_free cant unlock them.
(bgp_adj_out_set) lock the peer on new adj's, leave the reference
alone otherwise. lock the new bgp_info reference.
(bgp_adj_in_set) lock the peer reference
(bgp_adj_in_remove) and unlock it here
(bgp_sync_delete) make hash_free on peer conditional, just in
case.
* bgpd/bgp_fsm.c: (general) document that the timers depend on
bgp_event to release a peer reference.
(bgp_fsm_change_status) moved up the file, unchanged.
(bgp_stop) Decrement peer lock as many times as cancel_event
canceled - shouldnt be needed but just in case.
stream_fifo_clean of obuf made conditional, just in case.
(bgp_event) always unlock the peer, regardless of return value
of bgp_fsm_change_status.
* bgpd/bgp_packet.c: (general) change several bgp_stop's to BGP_EVENT's.
(bgp_read) Add a mysterious extra peer_unlock for ACCEPT_PEERs
along with a comment on it.
* bgpd/bgp_route.c: (general) Add refcounting of bgp_info, cleanup
some of the resource management around bgp_info. Refcount peer.
Add workqueues for bgp_process and clear_table.
(bgp_info_new) make static
(bgp_info_free) Ditto, and unlock the peer reference.
(bgp_info_lock,bgp_info_unlock) new exported functions
(bgp_info_add) Add a bgp_info to a bgp_node in correct fashion,
taking care of reference counts.
(bgp_info_delete) do the opposite of bgp_info_add.
(bgp_process_rsclient) Converted into a work_queue work function.
(bgp_process_main) ditto.
(bgp_processq_del) process work queue item deconstructor
(bgp_process_queue_init) process work queue init
(bgp_process) call init function if required, set up queue item
and add to queue, rather than calling process functions directly.
(bgp_rib_remove) let bgp_info_delete manage bgp_info refcounts
(bgp_rib_withdraw) ditto
(bgp_update_rsclient) let bgp_info_add manage refcounts
(bgp_update_main) ditto
(bgp_clear_route_node) clear_node_queue work function, does
per-node aspects of what bgp_clear_route_table did previously
(bgp_clear_node_queue_del) clear_node_queue item delete function
(bgp_clear_node_complete) clear_node_queue completion function,
it unplugs the process queues, which have to be blocked while
clear_node_queue is being processed to prevent a race.
(bgp_clear_node_queue_init) init function for clear_node_queue
work queues
(bgp_clear_route_table) Sets up items onto a workqueue now, rather
than clearing each node directly. Plugs both process queues to
avoid potential race.
(bgp_static_withdraw_rsclient) let bgp_info_{add,delete} manage
bgp_info refcounts.
(bgp_static_update_rsclient) ditto
(bgp_static_update_main) ditto
(bgp_static_update_vpnv4) ditto, remove unneeded cast.
(bgp_static_withdraw) see bgp_static_withdraw_rsclient
(bgp_static_withdraw_vpnv4) ditto
(bgp_aggregate_{route,add,delete}) ditto
(bgp_redistribute_{add,delete,withdraw}) ditto
* bgpd/bgp_vty.c: (peer_rsclient_set_vty) lock rsclient list peer
reference
(peer_rsclient_unset_vty) ditto, but unlock same reference
* bgpd/bgpd.c: (peer_free) handle frees of info to be kept for lifetime
of struct peer.
(peer_lock,peer_unlock) peer refcount helpers
(peer_new) add initial refcounts
(peer_create,peer_create_accept) lock peer as appropriate
(peer_delete) unlock as appropriate, move out some free's to
peer_free.
(peer_group_bind,peer_group_unbind) peer refcounting as
appropriate.
(bgp_create) check CALLOC return value.
(bgp_terminate) free workqueues too.
* lib/memtypes.c: Add MTYPE_BGP_PROCESS_QUEUE and
MTYPE_BGP_CLEAR_NODE_QUEUE
* bgp_network.c: (bgp_accept) use XSTRDUP
* bgpd.c: (peer_delete) XFREE the correct memtype, not free.
(peer_create) use XSTRDUP
* bgp_packet.c: (bgp_stream_dup) deleted, stream_dup should be used
(various) update -> s/bgp_stream_dup/stream_dup
* bgp_fsm.c: (bgp_stop) use sockunion_free, not XFREE..
* bgp_network.c: (bgp_getsockname) ditto
* bgp_routemap.c: (route_match_peer) ditto, als use a ret value and
remove one sockunion_free.
* bgpd.c: (peer_delete) ditto
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable
the length of confederation path segments to be included during the
as-path length check in the best path decision.
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp
graceful-restart" commands added. Show numbers of individual
messages in "show ip bgp neighbor" command. Final pieces of graceful
restart.
[merge from GNU Zebra]
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master()
function.
* bgp_packet.c: MP AFI_IP update and withdraw parsing.
* bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status()
is better place to log about peer status change than bgp_event().
Log in bgp_connect_success().
* bgp_vty.c: Fix typo in comment.
* bgp_attr.c: Better log about unknown attribute.
[merge from GNU Zebra]
size_t being used for streams. Perhaps cast to unsigned long before
printf? Surely that's big enough even if size_t could be larger in
theory.
(no changelog, since only comment changes)
* (global) more const'ification and fixups of types to clean up code.
* bgp_mplsvpn.{c,h}: (str2tag) fix abuse. Still not perfect,
should use something like the VTY_GET_INTEGER macro, but without
the vty_out bits..
* bgp_routemap.c: (set_aggregator_as) use VTY_GET_INTEGER_RANGE
(no_set_aggregator_as) ditto.
* bgpd.c: (peer_uptime) fix unlikely bug, where no buffer is
returned, add comments about troublesome return value.
(at Technical University of Madrid as part of Euro6ix Project)
Enhanced Route Server functionality and Route-Maps:
* bgpd/bgpd.h: Modified 'struct peer' and 'struct bgp_filter' to
support rs-clients. A 'struct bgp_table *rib' has been added to the
first (to mantain a separated RIB for each rs-client) and two new
route-maps have been added to the last (for import/export policies).
Added the following #defines: RMAP_{IN|OUT|IMPORT|EXPORT|MAX},
PEER_RMAP_TYPE_{IMPORT|EXPORT} and BGP_CLEAR_SOFT_RSCLIENT.
* bgpd/bgpd.c: Modified the functions that create/delete/etc peers in
order to consider the new fields included in 'struct peer' for
supporting rs-clients, i.e. the import/export route-maps and the
'struct bgp_table'.
* bgpd/bgp_route.{ch}: Modified several functions related with
receiving/sending announces in order to support the new Route Server
capabilities.
Function 'bgp_process' has been reorganized, creating an auxiliar
function for best path selection ('bgp_best_selection').
Modified 'bgp_show' and 'bgp_show_route' for displaying information
about any RIB (and not only the main bgp RIB).
Added commands for displaying information about RS-clients RIBs:
'show bgp rsclient (A.B.C.D|X:X::X:X)', 'show bgp rsclient
(A.B.C.D|X:X::X:X) X:X::X:X/M', etc
* bgpd/bgp_table.{ch}: The structure 'struct bgp_table' now has two
new fields: type (which can take the values BGP_TABLE_{MAIN|RSCLIENT})
and 'void *owner' which points to 'struct bgp' or 'struct peer' which
owns the table.
When creating a new bgp_table by default 'type=BGP_TABLE_MAIN' is set.
* bgpd/bgp_vty.c: The commands 'neighbor ... route-server-client' and
'no neighbor ... route-server-client' now not only set/unset the flag
PEER_FLAG_RSERVER_CLIENT, but they create/destroy the 'struct
bgp_table' of the peer. Special actions are taken for peer_groups.
Command 'neighbor ... route-map WORD (in|out)' now also supports two
new kinds of route-map: 'import' and 'export'.
Added commands 'clear bgp * rsclient', etc. These commands allow a new
kind of soft_reconfig which affects only the RIB of the specified
RS-client.
Added commands 'show bgp rsclient summary', etc which display a
summary of the rs-clients configured for the corresponding address
family.
* bgpd/bgp_routemap.c: A new match statement is available,
'match peer (A.B.C.D|X:X::X:X)'. This statement can only be used in
import/export route-maps, and it matches when the peer who announces
(when used in an import route-map) or is going to receive (when used
in an export route-map) the route is the same than the one specified
in the statement.
For peer-groups the statement matches if the specified peer is member
of the peer-group.
A special version of the command, 'match peer local', matches with
routes originated by the Route Server (defined with 'network ...',
redistributed routes and default-originate).
* lib/routemap.{ch}: Added a new clause 'call NAME' for use in
route-maps. It jumps into the specified route-map and when it returns
the first route-map ends if the called RM returns DENY_MATCH, or
continues in other case.
* bgpd.h: (bgp_peer) add fd_local and fd_accept
file descriptor's, fd becomes a pointer to one of these.
* bgpd.c: (global) adjust for fact that fd is now a pointer.
(peer_create_accept) removed.
* bgp_route.c: (global) adjust for change of peer fd to pointer
* bgp_packet.c: (bgp_collision_detect) adjust and remove the
"replace with other peer" hack.
* bgp_network.c: (bgp_accept) Remove the dummy peer hack.
Update peer->fd_accept instead.
(global) Adjust fd references - now a pointer.
* bgp_fsm.c: (global) adjust peer fd to pointer.
(bgp_connection_stop) new function, to stop connection.
(global) adjust everything which closed peer fd to use
bgp_connection_stop().
