When running pim on an interface and that interface has
state and we move that interface into a different vrf
there exists a call path where we have not created the pimreg
device yet. Prevent a crash in this rare situation.
Ticket: #2552763
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
VRF creation can happen from either cli or from
knowledged about the vrf learned from zebra.
In the case where we learn about the vrf from
the cli, the vrf id is UNKNOWN. Upon actual
creation of the vrf, lib/vrf.c touches up the vrf_id
and calls pim_vrf_enable to turn it on properly.
At this point in time we have a pim->vrf_id of
UNKNOWN and the vrf->vrf_id of the right value.
There is no point in duplicating this data. So just
remove all pim->vrf_id and use the vrf->vrf_id instead
since we keep a copy of the pim->vrf pointer.
This will remove some crashes where we expect the
pim->vrf_id to be usable and it's not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When creating configuration for a vrf *Before* the vrf has been
created, pim will not properly create the pimreg device and
we will promptly crash when we try to pass data.
Put some code checks in place to ensure that the pimreg is
created for vrf's.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The router->register_suppress_time is used to derive the
rp_keep_alive_time, but when the suppress time was changed, pim was
not recalculating the rp_keep_alive_time and left it at the old value.
This fix applies the changes when a new suppress_time is entered
(or removed.)
Signed-off-by: Don Slice <dslice@nvidia.com>
Problem reported that when certain pim commands were entered, they
showed up duplicated in the configuration both under default instance
and every vrf (whether pim was used there or not.) This was because
these particular parameters are global only and the function doing
the display would repeat for each vrf. This fix only displays those
in the default case (and removes them from the help for entering
under a vrf.)
Signed-off-by: Don Slice <dslice@nvidia.com>
Just some cleanup before I touch this code; switching to typesafe list
macros & putting the data directly inline.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... yes we may need it later, but if and when that happens we can put it
back there. No point carrying around unused things.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Display the MSDP peer configuration in `show running-config` so it can
be saved on configuration write.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
encoding signed int as unsigned is bad practice; since we want to do
it here lets at least be explicit about it
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
`config.h` has all the defines from autoconf, which may include things
that switch behavior of other included headers (e.g. _GNU_SOURCE
enabling prototypes for additional functions.)
So, the first include in any `.c` file must be either `config.h` (with
the appropriate guard) or `zebra.h` (which includes `config.h` first
thing.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... by referencing all autogenerated headers relative to the root
directory. (90% of the changes here is `version.h`.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Most of these are many, many years out of date. All of them vary
randomly in quality. They show up by default in packages where they
aren't really useful now that we use integrated config. Remove them.
The useful ones have been moved to the docs.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Issue:
User is allowed to configure only hello without hold timer but when undo
config, the hold timer is mandatory as shown below:
FRR-4(config-if)# ip pim hello 10
<cr>
(1-180) Time in seconds for Hold Interval
FRR-4(config-if)# ip pim hello 10
FRR-4(config-if)# no ip pim hello 10
(1-180) Time in seconds for Hold Interval
FRR-4(config-if)# no ip pim hello 10
% Command incomplete: no ip pim hello 20
Fix:
Making the hold timer as optional when undo config.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Also included display of hold time in CLI 'show ip pim int <intf>' cmd
and json commands.
Issue:
PIM neighbor not coming up if hold time is less than hello timer
since hello is sent every 4 sec and hold is 1 sec,
because of this nbr is flapping
Fix:
Do not allow configuration of hold timer less than hello timer
Also reset the value of hold timer to 3.5 times to hello whenever
only hello is modified so that the relationship holds good.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
There are places in the code where function nb_running_get_entry is used
with abort_if_not_found set to true during the config validation stage.
This is incorrect because when used in transactional CLI, the running
entry won't be set until the apply stage, and such usage leads to crash.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Recent change in commit: 6b73800ba2
Caused this error to pop up in pim_igmp_mtrace.c:
error: taking address of packed member 'rsp_addr' of class or structure 'igmp_mtrace' may result in an unaligned pointer value [-Werror,-Waddress-of-packed-member]
Follow the pattern used in the code to solve this problem for clang
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This was found while doing libyang2 work (causes assert); however, it is
also incorrect for libyang1 (empty canonical value for incorrectly
referenced interface vs interface-name node).
While here, fix 2 other incorrect uses of "." on a container node.
Signed-off-by: Christian Hopps <chopps@labn.net>
We can proactively check whether this mroute will be nacked by loopfree
MFC checks so let's do it in the apply phase and emit a useful error
message.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
When the control plane protocol is created, the vrf structure is
allocated, and its address is stored in the northbound node.
The vrf structure may later be deleted by the user, which will lead to
a stale pointer stored in this node.
Instead of this, allow daemons that use the vrf pointer to register the
dependency between the control plane protocol and vrf nodes. This will
guarantee that the nodes will always be created and deleted together, and
there won't be any stale pointers.
Add such registration to staticd and pimd.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
