Subset: ZAPI changes to send the new data
Also adds filter_bm field; currently for PBR_FILTER_PCP, but in the
future to be used for all of the filter fields.
Changes by:
Josh Werner <joshuawerner@mitre.org>
Eli Baum <ebaum@mitre.org>
G. Paul Ziemba <paulz@labn.net>
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Subset: feature in PBR
New PBR rule fields:
match ip-protocol (was only tcp|udp, now any value in /etc/protocols)
match pcp (0-7)
match vlan (1-4094)
match vlan (tagged|untagged|untagged-or-zero)
Filter flags
Add filter_bm (flags) field internally to indicate which
filter fields should be considered active. Bit definitions
as in lib/pbr.h.
This commit uses only the PBR_FILTER_PCP bit, but other
fields will be added in future commits. (Fixes bug related
to determining set/not-set state of pcp filter)
Shift vlan filter flags to lib/pbr.h
Changes by:
Josh Werner <joshuawerner@mitre.org>
Eli Baum <ebaum@mitre.org>
G. Paul Ziemba <paulz@labn.net>
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Previously we just raised an error for the test file with possibly all tests
passing. Now we fail any test that produces new backtraces or cores. This
just works a lot better with analysis and even CI.
Also be less verbose to the console after failure runs, just show error
level and above logs. The log files still capture all levels (DEBUG).
Signed-off-by: Christian Hopps <chopps@labn.net>
There's a workaround in the code from a bug from back in 2004, it ends
and re-enters config mode anytime an `exit` is done from a level below
the top-level config node (e.g., from a `router isis` node). We need to
re-enter config mode with or without a lock according to how we actually
entered it to begin with.
fixes#13920
Signed-off-by: Christian Hopps <chopps@labn.net>
The lock/unlocks are being done short-circuit so they are never pending;
however, the handling of the unlock notification was always resuming the command
if pending was set. In all cases pending is set for another command. For example
implicit commit locks then when notified its done unlocks which was clearing the
set-config pending flag and resuming that command incorrectly.
Signed-off-by: Christian Hopps <chopps@labn.net>
When running bgp_always_compare_med, I am frequently seeing a crash
After running with valgrind I am seeing this and a invalid write
immediately after this as well.
==311743== Invalid read of size 2
==311743== at 0x4992421: route_map_counter_decrement (routemap.c:3308)
==311743== by 0x35664D: peer_route_map_unset (bgpd.c:7259)
==311743== by 0x306546: peer_route_map_unset_vty (bgp_vty.c:8037)
==311743== by 0x3066AC: no_neighbor_route_map (bgp_vty.c:8081)
==311743== by 0x49078DE: cmd_execute_command_real (command.c:990)
==311743== by 0x4907A63: cmd_execute_command (command.c:1050)
==311743== by 0x490801F: cmd_execute (command.c:1217)
==311743== by 0x49C5535: vty_command (vty.c:551)
==311743== by 0x49C7459: vty_execute (vty.c:1314)
==311743== by 0x49C97D1: vtysh_read (vty.c:2223)
==311743== by 0x49BE5E2: event_call (event.c:1995)
==311743== by 0x494786C: frr_run (libfrr.c:1204)
==311743== by 0x1F7655: main (bgp_main.c:505)
==311743== Address 0x9ec2180 is 64 bytes inside a block of size 120 free'd
==311743== at 0x484B27F: free (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==311743== by 0x495A1BA: qfree (memory.c:130)
==311743== by 0x498D412: route_map_free_map (routemap.c:748)
==311743== by 0x498D176: route_map_add (routemap.c:672)
==311743== by 0x498D79B: route_map_get (routemap.c:857)
==311743== by 0x499C256: lib_route_map_create (routemap_northbound.c:102)
==311743== by 0x49702D8: nb_callback_create (northbound.c:1234)
==311743== by 0x497107F: nb_callback_configuration (northbound.c:1578)
==311743== by 0x4971693: nb_transaction_process (northbound.c:1709)
==311743== by 0x496FCF4: nb_candidate_commit_apply (northbound.c:1103)
==311743== by 0x496FE4E: nb_candidate_commit (northbound.c:1136)
==311743== by 0x497798F: nb_cli_classic_commit (northbound_cli.c:49)
==311743== by 0x4977B4F: nb_cli_pending_commit_check (northbound_cli.c:88)
==311743== by 0x49078C1: cmd_execute_command_real (command.c:987)
==311743== by 0x4907B44: cmd_execute_command (command.c:1068)
==311743== by 0x490801F: cmd_execute (command.c:1217)
==311743== by 0x49C5535: vty_command (vty.c:551)
==311743== by 0x49C7459: vty_execute (vty.c:1314)
==311743== by 0x49C97D1: vtysh_read (vty.c:2223)
==311743== by 0x49BE5E2: event_call (event.c:1995)
==311743== by 0x494786C: frr_run (libfrr.c:1204)
==311743== by 0x1F7655: main (bgp_main.c:505)
==311743== Block was alloc'd at
==311743== at 0x484DA83: calloc (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==311743== by 0x495A068: qcalloc (memory.c:105)
==311743== by 0x498D0C8: route_map_new (routemap.c:646)
==311743== by 0x498D128: route_map_add (routemap.c:658)
==311743== by 0x498D79B: route_map_get (routemap.c:857)
==311743== by 0x499C256: lib_route_map_create (routemap_northbound.c:102)
==311743== by 0x49702D8: nb_callback_create (northbound.c:1234)
==311743== by 0x497107F: nb_callback_configuration (northbound.c:1578)
==311743== by 0x4971693: nb_transaction_process (northbound.c:1709)
==311743== by 0x496FCF4: nb_candidate_commit_apply (northbound.c:1103)
==311743== by 0x496FE4E: nb_candidate_commit (northbound.c:1136)
==311743== by 0x497798F: nb_cli_classic_commit (northbound_cli.c:49)
==311743== by 0x4977B4F: nb_cli_pending_commit_check (northbound_cli.c:88)
==311743== by 0x49078C1: cmd_execute_command_real (command.c:987)
==311743== by 0x4907B44: cmd_execute_command (command.c:1068)
==311743== by 0x490801F: cmd_execute (command.c:1217)
==311743== by 0x49C5535: vty_command (vty.c:551)
==311743== by 0x49C7459: vty_execute (vty.c:1314)
==311743== by 0x49C97D1: vtysh_read (vty.c:2223)
==311743== by 0x49BE5E2: event_call (event.c:1995)
==311743== by 0x494786C: frr_run (libfrr.c:1204)
Effectively the route_map that is being stored has been freed already
but we have not cleaned up properly yet. Go through and clean the
code up by ensuring that the pointer actually exists instead of trusting
it does when doing the decrement operation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently, "on-match (next|goto)" only works if already present in a
route-map entry when the route-map is applied to the routes. However, if
the command is added to an existing route-map entry, the route-map is
not reapplied to the routes in order to accommodate the changes. And
service restart is needed. The problem is that setting the command
doesn't signal about the change to the listener (i.e. to a routing
daemon).
With this fix, signal to the listener about addition of "on-match
(next|goto)" to a route-map entry.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
`bnc->ifindex` should not be with 0 ( IFINDEX_INTERNAL ), so we can ignore
the wrong interface to make it safe.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Currently the vrf change procedure for the deleted interface is after
its deletion, it causes problem for upper daemons.
Here is the problem of `bgp`:
After deletion of one **irrelevant** interface in the same vrf, its
`ifindex` is set to 0. And then, the vrf change procedure will send
"ZEBRA_INTERFACE_DOWN" to `bgpd`.
Normally, `bgp_nht_ifp_table_handle()` should igore this message for
no correlation. However, it wrongly matched `ifindex` of 0, and removed
the related routes for the down `bnc`.
Adjust the location of the vrf change procedure to fix this issue.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Make the ospf6_lsa_unlock take the same parameters
that the ospf_lsa_unlock does to make it consistent
and to also ensure that no-one can make the mistake
of getting the pointer cleared up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Adjust one debug info, separate the ip address from it. Just like it is processed
in `redistribute_update()`.
Before:
```
34:1375.75.75.75/32: Redist del: re 0x55c1112067e0 (0:static), new re 0x55c1112de7c0 (0:static)
```
After:
```
(34:13):75.75.75.75/32: Redist del: re 0x55c1112067e0 (0:static), new re 0x55c1112de7c0 (0:static)
```
Signed-off-by: anlan_cs <vic.lan@pica8.com>