Add the ability to specify the label type along with the labels
you are passing to zebra in zapi_nexthop. This is needed as we
abstract the label code to be re-used by evpn as well as mpls.
Protocols need to be able to set the type of label they have attached.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Use the already existing mpls label code to store VNI
info for vxlan. VNI's are defined as labels just like mpls,
we should be using the same code for both.
This patch is the first part of that. Next we will need to
abstract the label code to not be so mpls specific. Currently
in this, we are just treating VXLAN as a label type and storing
it that way.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add a function nexthop_group_has_label() for determining
if even a single nexthop in the group has a label on it.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add new topo tests for validating mac learning, bridging and routing
with single vxlan device configuration
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This patch addresses fix for issues found during static analysis.
rt_netlink - initialise vtep if there is NDA_DST attribute
if_netlink - initialise vni_start and vni_end
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
zebra_vxlan_if.h header file was missed in noinst_HEADERS resulting
in build failure for some platforms.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
zebra_l2_bridge_if.h header file was missed in noinst_HEADERS resulting
in build failure for some platforms.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
This patch addresses following issues,
- When the VLAN-VNI mapping is configured via a map and not using
individual VXLAN interfaces, upon removal of a VNI ensure that the
remote FDB entries are uninstalled correctly.
- When VNI configuration is performed using VLAN-VNI mapping (i.e., without
individual VXLAN interfaces) and flooded traffic is handled via multicast,
the multicast group corresponding to the VNI needs to be explicitly read
from the bridge FDB. This is relevant in the case of netlink interface to
the kernel and for the scenario where a new VNI is provisioned or comes up.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This patch addresses following
- Remove unused VLAN Id parameter when trying to determine the VNI associated
with a non-VLAN aware bridge. Also, add a check to ensure that in this case,
we have a per-VNI VXLAN interface. Due to sequence of events, it is possible
that we may have VLAN-VNI mappings, in which case the code should return
gracefully.
- With support for a container VXLAN interface that has VLAN-VNI mappings,
the VXLAN interface itself may be up but a particular VNI might have
been removed. Ensure that VNI mapping exists before proceeding with
further processing.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This patch addresses following bug fixes
- Fix vtysh doc string in "show evpn access-vlan..." command
- Multicast group handling was little complex. This change avoids calling
multiple functions and directly calls the zebra_vxlan_if_update_vni for
mcast group updates.
- When a vlan-vni map is removed, the removed vni deletion was happening
in FRR with SVD config. This was resulting in stale vni and not
resulting propagation of the vni deletion.
During vni cleanup (zebra_vxlan_if_vni_clean) zebra_vxlan_if_vni_del
was called for vni delete which is not correct. We should be calling
zebra_vxlan_if_vni_entry_del for the given vni entry.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
Today to find the vni for a given (vlan, bridge) we walk over all interfaces
and filter the vxlan device associated with the bridge. With multiple vlan aware
bridge changes, we can derive the vni directly by looking up the hash table i.e.
the vlan_table of the associated (vlan, bridge) which would give the vni.
During vrf_terminate() call zebra_l2_bridge_if_cleanup if the interface
that we are removing is of type bridge. In this case, we walk over all
the vlan<->access_bd association and clean them up.
zebra_evpn_t is modified to record (vlan, bridge) details and the
corresponding vty is modified to print the same.
zevpn_bridge_if_set and zl3vni_bridge_if_set is used to set/unset the
association.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
Multiple vlan aware bridge data structure changes and its corresponding bridge
handling changes.
A new vlan-table is maintained for each bridge which records the zebra_l2_bridge_vlan
entry. zebra_l2_bridge_vlan maps vlan to access_bd associated to this bridge.
Existing zebra_evpn_access_bd structure is vlan aware which is now modified to be
(vlan, bridge) aware.
Whenever a new access_bd is instantiated, a corresponding entry is also recorded
in the zebra l2 bridge for the vlan.
When the access_bd is dereferenced or whenever a bridge is deleted, the
association is cleaned up.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This change brings in following functionality
- netlink_bridge_vxlan_vlan_vni_map_update for single vxlan devices
This function is responsible for reading the vlan-vni map information
received from netlink and populating a new hash_table with the vlan-vni
data. Once all the vlan-vni data is collected, zebra_vxlan_if_vni_table_add_update
is called to update vni_table in vxlan interface and process each of the
vlan-vni data.
- refactoring changes for zevpn_build_hash_table
- existing zevpn_build_hash_table was walking over all the vxlan interfaces
and then processing the vni for each of them. In case of single vxlan device,
we will have more than one vni entries. This function is abstracted so that
it iterates over all the vni entries for single vxlan device. For traditional
vxlan device the zebra_vxlan_if_vni_iterate would only process single vni
associated with that device.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This change modifies zebra_vxlan_if_up/down/add/update and del functionality
to be per vni based.
zebra_vxlan_if_add/update/del and zebra_vxlan_if_up/down now handles
the vni operations based on vxlan device type (single or traditional vxlan device).
zebra_vxlan_if_vni_table_add_update
- This function handles the vlan-vni map update received from the netlink
interface to single vxlan device vni_table hash table.
zebra_vxlan_if_vni_mcast_group_update
- This function handles the new multicast group update received from
the netlink interface to single vxlan device vni_table hash table.
For traditional vxlan interfaces, the vni and mcast group
handling follows the traditional approach.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This change refactors the zebra_vxlan_if related functionality
to a new zebra_vxlan_if.c file. zebra_vxlan_if_up/down,
zebra_vxlan_if_add/update/del is moved zebra_vxlan_if.c
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
dplane_mac_info and dplane_neigh_info is modified to be vni aware.
dplane_rem_mac_add/del dplane_mac_init is modified to be vni aware.
During dplane context update (mac and neigh), we use the vni information
and if set, corresponding netlink attribute NDA_SRC_VNI is set and passed to the
dplane.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This change set introduces data structure changes required for multiple vlan aware bridge
functionality. A new structure zebra_l2_bridge_if encapsulates the vlan to access_bd
association of the bridge. A vlan_table hash_table is used to record each instance
of the vlan to access_bd of the bridge via zebra_l2_bridge_vlan structure.
vxlan iftype derivation: netlink attribute IFLA_VXLAN_COLLECT_METADATA is used
to derive the iftype of the vxlan device. If the attribute is present, then the
vxlan interface is treated as single vxlan device, otherwise it would default to
traditional vxlan device.
zebra_vxlan_check_readd_vtep, zebra_vxlan_dp_network_mac_add/del is modified to
be vni aware.
mac_fdb_read_for_bridge - is modified to be (vlan, bridge) aware
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This changeset introduces the data structure changes needed for
single vxlan device functionality. A new struct zebra_vxlan_vni_info
encodes the iftype and vni information for vxlan device.
The change addresses related access changes of the new data structure
fields from different files
zebra_vty is modified to take care of the vni dump information according
to the new vni data structure for vxlan devices.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
When we receive a default route from a peer and we originate default route
using `neighbor default-originate`, we do not track of struct attr we use,
and when we do `no neighbor default-originate` we withdraw our generated
default route, but we announce default-route from the peer.
After we do this, we unintern aspath (which was used for default-originate),
BUT it was used also for peer's default route we received.
And here we have a use-after-free crash, because bgp_process_main_one()
reaps old paths that are marked as BGP_PATH_REMOVED with aspath->refcnt > 0,
but here it's 0.
```
0 0x55c24bbcd022 in aspath_key_make bgpd/bgp_aspath.c:2070
1 0x55c24b8f1140 in attrhash_key_make bgpd/bgp_attr.c:777
2 0x7f52322e66c9 in hash_release lib/hash.c:220
3 0x55c24b8f6017 in bgp_attr_unintern bgpd/bgp_attr.c:1271
4 0x55c24ba0acaa in bgp_path_info_free_with_caller bgpd/bgp_route.c:283
5 0x55c24ba0a7de in bgp_path_info_unlock bgpd/bgp_route.c:309
6 0x55c24ba0af6d in bgp_path_info_reap bgpd/bgp_route.c:426
7 0x55c24ba17b9a in bgp_process_main_one bgpd/bgp_route.c:3333
8 0x55c24ba18a1d in bgp_process_wq bgpd/bgp_route.c:3425
9 0x7f52323c2cd5 in work_queue_run lib/workqueue.c:282
10 0x7f52323aab92 in thread_call lib/thread.c:2006
11 0x7f5232300dc7 in frr_run lib/libfrr.c:1198
12 0x55c24b8ea792 in main bgpd/bgp_main.c:520
13 0x7f5231c3a082 in __libc_start_main ../csu/libc-start.c:308
14 0x55c24b8ef0bd in _start (/usr/lib/frr/bgpd+0x2c90bd)
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
This introduces the option for a user to lookup one specific prefix in
the advertised-routes or received-routes table of a peer.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Filter out keys in JSON output with "grep -v" does not work when JSON
does not use the pretty format.
Use native python code to filter out keys.
Fixes: 6c13bd5744 ("topotests: fix bgp_vpnv4_noretain")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Note: It's necessary that you specify the fetch-depth argument to
actions/checkout@v2 step. By default they fetch only latest commit of the
branch, but we need more commits since we validate a range of commit messages.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
