Currently zebra does not deny the routes if `ip protocol <proto> route-map
FOO`
commmand is configured with reference to an undefined route-map (FOO in
this case).
However, on FRR restart, in zebra_route_map_check() routes get denied
if route-map name is available but the route-map is not defined. This
change was introduced in fd303a4ba1.
Fix:
When `ip protocol <proto> route-map FOO` CLI is configured with reference to an
undefined route-map FOO, let the processing in ip_protocol_rm_add() and
ip_protocol_rm_del() go through so that zebra can deny the routes instead
of simply returning. This will result in consistent behavior.
Testing Done:
Before fix:
```
spine-1# configure
spine-1(config)# ip protocol bgp route-map rmap7
root@spine-1:mgmt:/var/home/cumulus# vtysh -c "show run" | grep rmap7
ip protocol bgp route-map rmap7
root@spine-1:mgmt:/var/home/cumulus#
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 02:27:45
B>* 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1, weight 1, 02:27:35
B>* 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2, weight 1, 02:27:40
B>* 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3, weight 1, 02:27:40
B>* 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4, weight 1, 02:27:40
```
After fix:
```
spine-1(config)# ip protocol bgp route-map route-map67
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 00:35:03
B 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1 inactive, weight 1, 00:34:58
B 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2 inactive, weight 1, 00:34:57
B 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3 inactive, weight 1, 00:34:57
B 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4 inactive, weight 1, 00:34:58
spine-1(config)#
root@spine-1:mgmt:/var/home/cumulus# ip route show
root@spine-1:mgmt:/var/home/cumulus#
```
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
(cherry picked from commit 705e8ef78f)
Without this patch we MUST follow this sequence:
```
no match peer 10.0.0.1
match peer 2a01::1
```
Otherwise, both IPv4/IPv6 values are set/compiled, thus when printing the
configuration in show running, we see the first one (IPv4).
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit edfc03614f)
Configured with "mpls label bind 1.1.1.1/32 explicit-null", the running
configuration is:
```
!
mpls label bind 1.1.1.1/32 IPv4 Explicit Null
!
```
After this commit, the running configuration is:
```
!
mpls label bind 1.1.1.1/32 explicit-null
!
```
And add the support for the "no" form:
```
anlan(config)# mpls label bind 1.1.1.1/32 explicit-null
anlan(config)# no mpls label bind 1.1.1.1/32 explicit-null
```
Signed-off-by: anlan_cs <anlan_cs@tom.com>
(cherry picked from commit 05ad3ccb03)
bgp_llgr topotest sometimes fails at step 8:
> topo: STEP 8: 'Check if we can see 172.16.1.2/32 after R4 (dynamic peer) was killed'
R4 neighbor is deleted on R2 because it fails to re-connect:
> 14:33:40.128048 BGP: [HKWM3-ZC5QP] 192.168.3.1 fd -1 went from Established to Clearing
> 14:33:40.128154 BGP: [MJ1TJ-HEE3V] 192.168.3.1(r4) graceful restart timer expired
> 14:33:40.128158 BGP: [ZTA2J-YRKGY] 192.168.3.1(r4) graceful restart stalepath timer stopped
> 14:33:40.128162 BGP: [H917J-25EWN] 192.168.3.1(r4) Long-lived stale timer (IPv4 Unicast) started for 20 sec
> 14:33:40.128168 BGP: [H5X66-NXP9S] 192.168.3.1(r4) Long-lived set stale community (LLGR_STALE) for: 172.16.1.2/32
> 14:33:40.128220 BGP: [H5X66-NXP9S] 192.168.3.1(r4) Long-lived set stale community (LLGR_STALE) for: 192.168.3.0/24
> [...]
> 14:33:41.138869 BGP: [RGGAC-RJ6WG] 192.168.3.1 [Event] Connect failed 111(Connection refused)
> 14:33:41.138906 BGP: [ZWCSR-M7FG9] 192.168.3.1 [FSM] TCP_connection_open_failed (Connect->Active), fd 23
> 14:33:41.138912 BGP: [JA9RP-HSD1K] 192.168.3.1 (dynamic neighbor) deleted (bgp_connect_fail)
> 14:33:41.139126 BGP: [P98A2-2RDFE] 192.168.3.1(r4) graceful restart stalepath timer stopped
af8496af08 ("bgpd: Do not delete BGP dynamic peers if graceful restart
kicks in") forgot to modify bgp_connect_fail()
Do not delete the peer in bgp_connect_fail() if Non-Stop-Forwarding is
in progress.
Fixes: af8496af08 ("bgpd: Do not delete BGP dynamic peers if graceful restart kicks in")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit e446308d76)
Don't allocate subtlvs container if there's nothing to add to it. If the
container is allocated, the "sub-TLVs presence" bit is set in the TLVs
even if there's no actual sub-TLVs, what violates the RFC.
Fixes#14514.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit c3d34b84f3)
join_desired looks at whether up->channel_oil is empty. up->channel_oil
is updated from pim_forward_stop(), calling pim_channel_del_oif(). But
that was being called *after* updating join_desired, so join_desired saw
a non-empty OIL. Pull up the pim_forward_stop() call to before updating
join_desired.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit fdb1a6fed5)
It looks like the code was trying to do this with the null_register
parameter on pim_upstream_start_register_stop_timer(), but that didn't
quite work right. Restructure a bit to get it right.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit dce38da806)
In the context of SVD (Single VxLAN Device) for L3VNI,
the remote VTEP's nexthop is programmed neighbor entry against
SVD along with neighbor entry against SVI.
However, when L3VNI is removed or the VRF is disabled, all SVI
based remote nexthop neighbors are uninstalled and deleted.
The SVD based neigh entries remains in Zebra and the Kernel.
Subsequently, when reconfiguring L3VNI and relearning the same nexthop,
the neighbor entry is not programmed is because it is not removed
from Zebra SVD neighbor hash table, leading to the failure to
reprogram the entry.
With this fix, the SVD nexthop neigh entry is uninstalled
and deleted from Zebra and Kernel.
Ticket: #3729045
Testing:
borderleaf:# ip neigh show 2.2.2.2
2.2.2.2 dev vlan2560_l3 lladdr 00:01:00:00:1d:09 extern_learn NOARP proto zebra
2.2.2.2 dev vxlan99 lladdr 00:01:00:00:1d:09 extern_learn NOARP proto zebra
With the fix:
Zebra log shows both enties SVD (vxlan99) and SVI (vlan2560_l3)
neighbor entries are deleted.
2024/05/03 18:41:33.527125 ZEBRA: [NH6N7-54CD1] Tx RTM_DELNEIGH family
ipv4 IF vxlan99(16) Neigh 2.2.2.2 MAC null flags 0x10 state 0x0
ext_flags 0x0
2024/05/03 18:41:33.527128 ZEBRA: [NH6N7-54CD1] Tx RTM_DELNEIGH family
ipv4 IF vlan2560_l3(18) Neigh 2.2.2.2 MAC null flags 0x10 state 0x0
ext_flags 0x0
borderleaf:# ip neigh show 2.2.2.2
borderleaf:#
Signed-off-by: Chirag Shah <chirag@nvidia.com>
(cherry picked from commit fde6dd7bb9)
If entering `no set as-path prepend 1 2 3`, it's warned as unknown command.
Now fixed, and the following combinations work fine:
```
no set as-path prepend
no set as-path prepend last-as
no set as-path prepend last-as 1
no set as-path prepend 1
no set as-path prepend 1 2
```
Fixes: https://github.com/FRRouting/frr/issues/15912
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit e069a1c8d5)
E.g. Cisco sends AIGP attribute as transitive, but it's wrong. Hence, the session
is teared down, because of this bgp_attr_flag_invalid() test.
Relax this check if we have `neighbor X path-attribute <discard|treat-as-withdraw>`
configured.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit 714e5be9a0)
When BGP receives an SRV6_LOCATOR_ADD message from zebra, it calls the
`bgp_zebra_process_srv6_locator_add()` function to process the message.
`bgp_zebra_process_srv6_locator_add()` decodes the message first, and
then if the pointer to the default BGP instance is NULL (i.e. the
default BGP instance is not configured yet), it returns early without
doing anything and without using the decoded message information.
This commit fixes the order of the operations executed by
`bgp_zebra_process_srv6_locator_add()`. We first ensure that the default
BGP instance is ready and we return early if it is not. Then, we decode
the message and do something with the information contained in it.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
(cherry picked from commit bdc2c7bc54)
When BGP receives a `SRV6_LOCATOR_DEL` from zebra, it invokes
`bgp_zebra_process_srv6_locator_delete` to process the message.
`bgp_zebra_process_srv6_locator_delete` obtains a pointer to the default
BGP instance and then dereferences this pointer.
If the default BGP instance is not ready / not configured yet, this
pointer this pointer is `NULL` and dereferencing it causes BGP to crash.
This commit fix the issue by adding a a check to verify if the pointer
is `NULL` and returning early if it is.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
(cherry picked from commit ae3241b96d)
c-ares has deprecated ares_gethostbyname() in version 1.28.0
Replace it with ares_getaddrinfo().
This fixes a build error on Fedora 40.
Signed-off-by: Andrew Cooks <acooks.at.bda@gmail.com>
(cherry picked from commit 89a2e4d825)
ares_process(...) has been deprecated.
Replace it with ares_process_fd(...)
Signed-off-by: Andrew Cooks <acooks.at.bda@gmail.com>
(cherry picked from commit 4540fa0a3e)
ospfv3 shows this unconditionally, and ospfv2 does not show `ip ospf network ...` if the type of the interface matches the specified network.
Fixes: https://github.com/FRRouting/frr/issues/15817
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
pimd crashs while unconfigure of rp ka timer as we are trying to access
a yand dnode(suppress timer) which does not exist at the moment.
User just configured rp keepalive timer and not suppress timer,
the yang dnode would not be present. Instead of directly accessing
yang_dnode_get_unit16, first check the yang node exist using
the xpath.
Ticket: #3874971
Testing:
Before:
------
tor-11(config)# no ip pim rp keep-alive-timer 3000
vtysh: error reading from pimd: Success (0)Warning: closing connection to pimd because of an I/O error!
Broadcast message from root@tor-11 (somewhere) (Mon Apr 22 17:29:12 2024):
cumulus-core: Running cl-support for core files "pimd.25467.1713806952.core"
After:
-----
tor-11(config)# no ip pim rp keep-alive-timer 3000
tor-11(config)#
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Vijayalaxmi Basavaraj <vbasavaraj@nvidia.com>
(cherry picked from commit 0c4b7c1f1f)
In zebra_interface_nhg_reinstall zebra is checking that the
nhg is a singleton and not a blackhole nhg. This was originally
done with checking that the nexthop is a NEXTHOP_TYPE_IFINDEX,
NEXTHOP_TYPE_IPV4_IFINDEX and NEXTHOP_TYPE_IPV6_IFINDEX. This
was excluding NEXTHOP_TYPE_IPV4 and NEXTHOP_TYPE_IPV6. These
were both possible to be received and maintained from the upper
level protocol for when a route is being recursively resolved.
If we have gotten to this point in zebra_interface_nhg_reinstall
the nexthop group has already been installed at least once
and we *know* that it is actually a valid nexthop. What the
test is really trying to do is ensure that we are not reinstalling
a blackhole nexthop group( Which is not possible to even be
here by the way, but safety first! ). So let's change
to test for that instead.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 29c1ff446e)
The usage of the `bgp bestpath med missing-as-worst` command
was being accepted and applied during bestpath, but during output
of the routes affected by this it would not give any indication
that this was happening or what med value was being used.
Fixes: #15718
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit bc9885b22e)
