Rename "debug isis ti-lfa" to "debug isis lfa". Having different
debug guards for different kinds of LFA (classic, remote and TI-LFA)
doesn't make sense since all LFA solutions share code to certain
extent.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Those constants are also useful in contexts other than LDP-IGP
Synchronization (e.g. the upcoming LFA work will need them). Move
them to a more general header to reflect that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do not attempt to install a TI-LFA backup nexthop if its number of
labels exceeds the locally configured MSD (Maximum Stack Depth). The
idea is to prevent forward-plane installation failures before they
happen. The MSD check should also allow the "show isis fast-reroute
summary" command (not implemented yet) to display the actual
protection coverage provided by TI-LFA, which might not be 100%
if the MSD isn't big enough.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The bgpd --listenon option implies --no_kernel. This commit makes note
of that in the documentation.
Signed-off-by: Mathias Bøhn Grytemark <mathias@grytemark.no>
We should not prepend "do" when executing commands from the view node,
because view node doesn't support "do" shortcut.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When an ABR NSSA router is configured to be ALWAYS the translator:
r22(config-router)# area 1 nssa translate-always
It will advertise this condition in the type-1 LSA setting the Nt
bit, taking over the translator role from r33
r22# show ip ospf
We are an ABR and always an NSSA Translator.
r33# show ip ospf
We are an ABR, but not the NSSA Elected Translator.
However when the command above is removed:
r22(config-router)# no area 1 nssa translate-always
the bit Nt needs to be cleared otherwise we end up with no translator
in the area
r22# show ip ospf
We are an ABR, but not the NSSA Elected Translator.
r33# show ip ospf
We are an ABR, but not the NSSA Elected Translator.
This PR forces the ABR to send a type-1 LSA with the Nt bit updated
according to the translator role
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
Current code when we are establishing a peering relationship when
under the HAVE_CUMULUS block will dissallow v4/v6 connections if
we do not have v4/v6 addresses applied. This restriction is
a bit harsh and should be allowed but warned against.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fix lib to start loggin to correct daemon file on startup
Fix bgp-auth tests for the logging changes
Fixes Issue # 7545
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
problem
1. run the bgp with -e1 option
2. c t
router bgp 100
3. show running config
!
address-family ipv6 multicast
maximum-paths 1
maximum-paths ibgp 1
exit-address-family
!
address families should not dump maximum-paths if there
value is same as value provided at run time.
fix
if the maxpaths_ebgp value is same as multipath_num global
object, don't dump maximum-paths.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
start_config and end_config are already used as function names in DEFUN,
so the current naming is a little bit confusing. Let's use different
names for arguments.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
