This includes -
1. non-DF block filter
2. List of es-peers that need to be blocked per-access port (for
split horizon filtering)
3. Backup nexthop group to failover local-es via the VxLAN overlay
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Because the backup nexthop groups currently are more like pseudo-NHEs
(they don't have IDs and are not inserted into the ID table or
hashed), they can't really have this depends/dependents relationship
yet in both directions. Some work needs to be done there to make
them more like first class citizens like "normal" NHGs to enable
this.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When `-r` is specified to zebra, on shutdown we should
not remove any routes from the fib. This was a problem
with nhg's on shutdown due to their ref-count behavior.
Introduce a methodology where on shutdown we don't mess
with the nexthop groups in the kernel. That way on
next startup things will be ok.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Apparantly the dependents backpointer trees for singletons
got broken at some point and we never noticed. There is
not really any code making use of this right now so not
suprising but let's go ahead and fix it for zebra and proto
NHGs.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Let's just track the NHEs we get from the kernel(dplane) for
ID usage with internal routes. I tried to be smart originally
and allow them to be re-used internal to zebra but its proving
to cause more bugs than it's worth.
This doesn't break any functionality. It just means we won't
use NHEs we get from the kernel with our routes, we will create
new ones.
Decided this based on various bugs seen ith the lastest one
being on startup with this kernel state:
```
[root@alfred frr-2]# ip next ls
id 15 via 192.168.161.1 dev doof scope link proto zebra
id 17 group 15 proto zebra
[root@alfred frr-2]# ip ro show 3.3.3.1
3.3.3.1 nhid 17 via 192.168.161.1 dev doof
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a param to the common NHE creation callstack so we can
know if this is one we have read in from the dataplane. We can
add some logic on how to handle these special ones later.
I considered putting this on a struct as a flag or something
but it would have required it being put on struct nexthop
since we have some `*_find_nexthop()` functions that can
be called when given NHEs from the dataplane.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When debugging why a route was not successfully installed into the
rib, it would be preferable that the end user only have to turn
on `debug zebra rib detail` as that is what we have been telling
people to do for the last couple of years. Consolidate *back*
to this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the zapi code for encoding/decoding of backup nexthops for when
we are ready for it, but disable it for now so that we revert
to the old way with them.
When zebra gets a proto-NHG with a backup in it, we early fail and
tell the upper level proto. In this case sharpd. Sharpd then reverts
to the old way of installation with the route.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add type to the nhg_proto_del API params for sanity checking
that the types of the route sent by the proto matches the type
found with the ID.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
In scoring our NHEs during shutdown there is a chance we could release mutliple
NHEs at the same time during one iteration. This can cause memory corruption
if the two being released are directly next to each other in the hash table.
hash_iterate accounts for releasing one during the iteration but not
two by setting hbnext before release but if hbnext is also freed,
we obviously can have a problem.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Reject proto NHGs of type blackhole/interface for now.
We need to think a bit more about how to resolve these
given the linux kernel needs to know the Address Family
of the routes that will use them and install it with them.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a flag to track the released state of a proto-based NHG.
This flag is used to know whether the upper level proto has called
the *_del API. Typically, the NHG would just get removed and uninstalled
at this point but there is a chance we are being sent it while routes
are still being owned or we were sent it multiple times. This flag
and associated code handles that.
Ticket: CM-30369
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We currently don't support ADD/DEL/REPLACE with proto-based
NHGs that are not already fully resolved and ifindex/onlink
based. If we are handed one that doesn't have ifindex set
i.e. recursive, gracefully fail and with a notification.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The code was installing the nexthop group again using
the NLM_F_REPLACE function causing extremely large
route installation times. This reduces the time from
installing 1 million routes from sharpd with a nhg
from > 200 seconds ( where I gave up ) to ~15
seconds on my machine for 32 x ecmp. As a side note 1 million
routes using master sharpd takes ~50 seconds to do
the same thing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Return the proto nhe on del even if their are still possible
route references.
We may get a del before the routes are removed. So we still need
to return this to the caller so they can decrement the ref.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Fix the releasing of proto-owned singletons from the attribute
hashed table. Proto-owned singleton nexthops are hashed so they
can still be shared therefore they are present in this table
and need to be released when the time comes.
This check was only matching on zebra proto before. Changed
to match IDs in zebra allocated range.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Increment the nhg proto score iterator we used to count
leftover NHGs after client disconnect and log.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Fix some reference counting issues seen when replacing
a NHG and deleting one.
For replacement, we should end with the same refcnt on the new
one.
For delete, its the caller's job to decrement its ref after
its done with it.
Further, update routes in the rib with the new pointer after replace.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add code to handle proto-based NHG uninstalling after
the owning client disconnects.
This is handled the same way as rib_score_proto() but for now
we are ignoring instance.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Remove some leftover boilerplate from the old replace
code path. That code ended up in the add API so its no
longer needed.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Make NHG ID allocation smarter so it wraps once it hits
the lower bound for protos and performs a lookup to make
sure we don't already have that ID in use.
Its pretty unlikely we would wrap since the ID space is somewhere
around 24million for Zebra at this point in time.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Determine the NHG ID spacing and lower bound with ZEBRA_ROUTE_MAX
in macros.
Directly set the upperbound to be the lower 28bits of the uint32_t ID
space (the top 4 are reserved for l2-NHGs). Round that number down
a bit to make it more even.
Convert all former lower_bound calls to just use the macro.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When we receive a NHG from the kernel, we set the ID counter
to that to avoid using IDs owned from the kernel.
If we get one outside of zebra's range, lets not update it
since its probably one we created and never deleted anyway.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
For now let's assume proto-NHG-based routes are good to go
(we assume they are onlink/interface based anyway) and bypass
route resolution altogether.
Once we determine how to handle recursive nexthop-resolution for
proto-NHGs we will revisit this.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Implement the ability to replace an NHG sent down
from an upper level proto. With proto-owned NHGs, we make the
assumption they are ecmp and always treat them as a group
to make the replace from 1 -> 2 and 2 -> 1 quite a bit
easier.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
To prevent duplication of singleton NHGs, lets hash
any zebra-ID spaced NHGs sent from an upper level proto.
These would be singleton NHGs anyway and should prevent duplication
of dataplane installs.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a command/functionality to only install proto-based nexthops.
That is nexthops owned/created by upper level protocols, not ones
implicitly created by zebra.
There are some scenarios where you would not want zebra to be
arbitrarily installing nexthop groups and but you still want
to use ones you have control over via lib/nexthop_group config
and an upper level protocol.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Implement the underlying zebra functionality to Add/Del an
internal zebra and kernel NHG.
These NHGs are managed by the upperlevel protocols that send them
down via zapi messaging.
They are not put into the overall zebra NHG hash table and only
put into to the ID table. Therefore, different protos cannot
and will not share NHGs.
The proto is also set appropriately when sent to the kernel.
Expand the separation of Zebra hashed/shared/created NHGs and
proto created and mangaged NHGs.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Remove the code for setting a NHG as unhashable. Originally
this was to prevent us from attempting to put duplicates from
the kernel in our hashtable.
Now I think its better to not use them in the hashtable at all
and only track them in the ID table. Routes will still be able
to use them if they specify the ID explicitly when sending Zebra
the route, but 'normal' routes we hash the nexthop group on
will not.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Let's not make the entire `depend_finds` function pay
for the data gathering needed for the debug. There
are numerous other places in the code that check
the NEXTHOP_FLAG_RECURSIVE and do the same output.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We can make the Linux kernel send an ARP/NDP request by adding
a neighbour with the 'NUD_INCOMPLETE' state and the 'NTF_USE' flag.
This commit adds new dataplane operation as well as new zapi message
to allow other daemons send ARP/NDP requests.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
For the sake of Segment Routing (SR) and Traffic Engineering (TE)
Policies there's a need for additional infrastructure within zebra.
The infrastructure in this PR is supposed to manage such policies
in terms of installing binding SIDs and LSPs. Also it is capable of
managing MPLS labels using the label manager, keeping track of
nexthops (for resolving labels) and notifying interested parties about
changes of a policy/LSP state. Further it enables a route map mechanism
for BGP and SR-TE colors such that learned BGP routes can be mapped
onto SR-TE Policies.
This PR does not introduce any usable features by now, it is just
infrastructure for other upcoming PRs which will introduce 'pathd',
a new SR-TE daemon.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Added a macro to validate the v4 mapped v6 address.
Modified bgp receive & send updates for v4 mapped v6 address as
nexthop and installing it as recursive nexthop in RIB.
Minor change in fpm while sending the routes for nexthop as
v4 mapped v6 address.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
Improve vty output for routes and lsps with backups, including
json. Simplify or correct some code that uses both primary and
backup nexthops in dplane, nht.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
If we are asked to check if a nexthop is active and it matches a
connected route but the ifindex on it does not match the interface
with the connected route, mark as inactive. This is a bad nexthop.
Before, we would skip this check and just assume any nexthop that matches
on a connected route is valid and return here then fail during
installation. This adds a check for the IPV*_ifindex nexthop case where the
ifindex we have been sent doesn't match.
Old:
F>r 0.0.0.0/0 [200/0] via 20.0.0.2, test, weight 1, 00:00:27
r via 40.4.4.4, lo, weight 1, 00:00:27
New:
F>* 0.0.0.0/0 [200/0] via 20.0.0.2, test, weight 1, 00:00:06
* via 40.4.4.4, lo inactive, weight 1, 00:00:06
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When handling a fib notification event that involves a route
with backup nexthops, be clearer about representing the
installed state of the backups: any installed backup will be
on a dedicated route_entry list.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Remove a special-case clause for static routes - it was the same
as the clause for other recursive routes. Have staticd just tell
zebra that recursion is allowed. Update topotest that was aware
of this 'internal' flag.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use the right list of daemons to avoid trying to start zebra twice.
Change a zebra log message to INFO level to avoid stderr check
failure.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This commit is the first step to convert IP rule installation to
use dplane thread.
* Add dataplane's internal representation of a pbr rule
* Add dplane stats related to rules
* Introduce a new type of dplane operation
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
When checking if a nexthop is active, if it has been marked as onlink,
just check on the presence and status of the nexthop's interface. When
handling client request to create a route, if the client says that the
nexthop is onlink, trust it; when internally (in zebra) determining
that the nexthop is onlink, ensure it is only done in the case of an
interface with a /32 IP address which is the case for OSPF unnumbered.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Stephen Worley <sworley@cumulusnetworks.com>
