Instead of adding a separate case clause for every node, just find the
node structure in the global list and get its parent node from there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There's no IPv6 LL address on loopback/vrf interfaces. So if the user
configures update-source, the session is never going to be established.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The prefix of routes to border routers consists of two pieces of
information embedded in a single struct (prefix.u.lp):
struct prefix {
uint8_t family;
uint16_t prefixlen;
union {
[snip]
struct {
struct in_addr id;
struct in_addr adv_router;
} lp;
} u __attribute__((aligned(8)));
};
As such, using prefix2str() (or the %pFX format specifier) isn't
correct when logging such routes.
This commit adds a few special cases here and there to handle
OSPF6_DEST_TYPE_ROUTER routes differently. It'd probably be a good
idea to add a helper function to handle all cases in a single place,
but that can be left for a second moment.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Problem :
=======
When all the groups from Ixia are stopped,
groups still keep refreshing and not getting timeout
RCA:
====
IGMP Report is coming in include mode without any source address, this problem will come.
Fix :
===
If the requested filter mode is INCLUDE *and* the requested
source list is empty, then the entry corresponding to the
requested interface and multicast address is deleted if present.
If no such entry is present, the request is ignored.
When an interface receives the IGMP report without any source, then the group is deleted.
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Also, update the ospf6_topo2 topotest since the expected output
was wrong. With this fix, NSSA routes will be created on r2
("redistribute connected"), and NSSA routes appear in the routing
table as regular external routes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Once NSSA is unconfigured on an area, all self-originated Type-7
LSAs need to be flushed. The existing code was iterating over the
LSDB in the wrong way, causing ospf6_nssa_flush_area() to flush
LSAs of all types. Use the ALL_LSDB_TYPED_ADVRTR macro to perform
the intended iteration correctly.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Once NSSA is unconfigured, the OSPF area should still be operational
as a normal area instead of being deleted.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RFC 3101 - Section 2.1 says:
"(..) Interfaces associated with an NSSA will not send or receive
Type-5 LSAs on that interface but may send and receive Type-7 LSAs.
Therefore, if the N-bit is set in the options field, the E-bit must
be clear."
If the E-bit isn't cleared on an NSSA ABR, that will cause hello
packets to be dropped (due to parameters mismatch), which will
prevent the ABR from forming adjacencies with others routers in
the NSSA area.
This problem didn't affect the existing NSSA topotest by chance
of luck. In that topotest, in the NSSA ABR, the NSSA area is
configured before any interface is associated to it. That caused
ospf6_check_and_set_router_abr() to return false, leading to
the unsetting of the E-bit. With this fix, the order in which
areas/interfaces are configured shouldn't matter because the E-bit
will always be unset on NSSA areas.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
OSPF mixes uses of "delete" and "del_action" depending on which library
function is called. It's a bug-prone mess that needs fixing; however, for
now we fix the one obvious incorrect use in this test.
Signed-off-by: Christian Hopps <chopps@labn.net>
"[no] netns NAME" commands are part of the lib, but they are actually
zebra-only:
- they are using vrf_netns_handler_create and its description clearly
says that it "should be called from zebra only"
- vtysh sends these commands only to zebra
- only zebra outputs the netns related config
- zebra notifies other daemons about netns attachment
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Instead of setting a config_write callback for each node, set a single
callback and print all config from there. It is necessary for the
following work on explicit "exit" command in every node.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, in frr-reload we:
- store a list of single-line context keywords which needs to be
frequently updated,
- have a separate "if" clause for every node and subnode we have in FRR.
Instead, we can store the tree of all known FRR nodes. This tree needs
to be updated whenever we add a new node, which is not frequent. And,
most importantly, it allows us to write node-agnostic code and save more
than 250 LOC.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Problem Statement:
==================
Everytime redistribute CLI is executed, external LSAs are
re-originated. When there is no change in the CLI parameters
the LSAs should not get re-originated.
Fix:
=================
Check if the CLI params are same, do not re-originate the LSA.
Fixes: #9445
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
