Upon following calls: interface poll, address poll, route poll, and
ICMPv6 handling, each new Namespace is being parsed. For that, the
socket operations need to switch from one NS to one other, to get the
necessary information.
As of now, there is a crash when dumping interfaces, through show
running-config.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Using the vrf backend kind, the vty command that configured netns
under vty will not be installed if the vrf backend is vrf lite
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a vty command is added:
in addition to this command ( kept for future usage):
- [no] logical-router-id <ID> netns <NETNSNAME>
a new command is being placed under vrf subnode
- vrf <NAME>
[no] netns <NETNSNAME>
exit
This command permits to map a VRF with a Netnamespace.
The commit only handles the relationship between vrf and ns structures.
It adds 2 attributes to vrf structure:
- one defines the kind of vrf ( mapped under netns or vrf from kernel)
- the other is the opaque pointer to ns
The show running-config is handled by zebra daemon.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The netns backend is chosen by VRF if a runtime flag named vrfwnetns is
selected when running zebra.
In the case the NETNS backend is chosen, in some case the VRFID value is
being assigned the value of the NSID. Within the perimeter of that work,
this is why the vrf_lookup_by_table function is extended with a new
parameter.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The ZEBRA_FLAG_INTERNAL flag is used to signal to zebra that
the route being added, the nexthops for it can be recursively
resolved. This name keeps throwing me off when I read it
so let's rename to something that allows the developer to
understand what is going on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the future we are going to have a rule_notify_owner
so make the distinction between the two types of notification
clearer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The notification of the owner was not properly decoding
the prefix and as such we were not properly reading the
table it was installed into.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit is the implementation of weak multicast traceroute.
It consists of IGMP module dealing with mtrace type IGMP messages
and client program mtrace/mtracebis for initiating mtrace queries.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
Add the ability to pass in an afi to zebra. zebra_vrf keeps
track of the afi/label tuple and then does the right thing
before we call down. AF_MPLS does not care about v4 or v6
it just knows label and what device to use for lookup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify mpls.h to rename MPLS_LABEL_ILLEGAL to be MPLS_LABEL_NONE.
Fix all pre-existing code that used MPLS_LABEL_ILLEGAL.
Modify the zapi vrf label message to use MPLS_LABEL_NONE as the
signal to remove label associated with a vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to pass the lsp owner type through the zapi
and in addition add a new label type for the sharp protocol
for testing.
Finally modify zebra_mpls.h to not have defaults specified
for the enum. That way when we add a new LSP type the
compile fails and the person doing the addition knows
where he has to touch shit.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Turns out we had 3 different ways to define labels
all of them overlapping with the same meanings.
Consolidate to 1. This one choosen is consistent
naming wise with what the *bsd and linux kernels
use.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For L3VPN's we need to create a label associated with the specified
vrf to be installed into the kernel to allow a pop and lookup
operation.
The new api is:
zclient_send_vrf_label(struct zclient *zclient, vrf_id_t vrf_id,
mpls_label_t label);
For the specified vrf_id associate the specified label for
a pop and lookup operation for forwarding.
To setup a POP and Forward use MPLS_LABEL_IMPLICIT_NULL
If the same label is passed in we ignore the call.
If the label is different we update entry.
If the label is MPLS_LABEL_NONE we remove
the entry.
This sets up the api. Future commits will have the functionality
to actually install into the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The nh_resolve_via_default function is an accessor function
for NHT in zebra. Let's move this function to it's proper
place.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Create a zapi_nexthop_update_decode function that both
pim and bgp use to decode the message from zebra.
There probably could be further optimizations but I opted
to keep the code as similiar as is possible between the
originals because they both make some assumptions about
code flow that I do not fully understand yet.
The real goal here is that I want to create a new
user of the nexthop tracking code from a higher level
daemon and I see no need to re-implement this damn
code again for a 3rd time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* zebra/kernel_socket.c: include "rt.h" to provide the prototypes of
kernel_init() and kernel_terminate();
* lib/prefix.h: remove the deprecation warning whenever ETHER_ADDR_LEN
is used. isisd uses the ETHER_HDR_LEN constant which is defined in
terms of ETHER_ADDR_LEN in the *BSD system headers. So, when building
FRR on *BSD, we were getting several warnings because we were using
ETHER_ADDR_LEN indirectly;
* lib/command_lex.l, lib/defun_lex.l: ignore other harmless warnings;
* lib/spf_backoff.c: cast 'tv->tv_usec' to 'long int' before printing.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
None of these variables can actually be used before being initialized,
but unfortunately some old compilers are not smart enough to detect that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The PIM_NODE command is only being used to display
default vrf configuration. Move this into the
vrf display and remove PIM_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some work on FRR's pthread wrapper.
* Provide a built-in way to synchronize thread startup
* Make utility functions take frr_pthread * instead of its integer ID
* Pass frr_pthread * as pthread start function argument
* Correct some comment styling
* Rename some variables to match naming conventions in the file
* Change parameter ordering in stop function prototype to follow the
convention in the other functions
* Default new frr_pthreads to using a vanilla event loop
For the last point, the original goal when designing the implementation
of pthreads into FRR was to be able to use the thread.c event based
system inside pthreads. This code essentially encapuslates all the
thread.c functionality into an easy to use pthread out of the box.
Creating a new frr_pthread with a null attributes field will cause the
created frr_pthread to run a thread.c event loop. The upshot of this is
that it is now possible to safely run existing functions in a pthread in
roughly 3 lines of code. It also serves as an example / starting point
for others.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Refine the notion of what FRR considers as "configured" VRF. It is no longer
based on user just typing "vrf FOO" but when something is actually configured
against that VRF. Right now, in zebra, the only configuration against a VRF
are static IP routes and EVPN L3 VNI. Whenever a configuration is removed,
check and clear the "configured" flag if there is no other configuration for
this VRF. When user attempts to configure a static route and the VRF doesn't
exist, a VRF is created; the VRF is only active when also defined in the
kernel.
Updates: 8b73ea7bd479030418ca06eef59d0648d913b620
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-10139, CM-18553
Reviewed By: CCR-7019
Testing Done:
1. Manual testing for L3 VNI and static routes - FRR restart, networking
restart etc.
2. 'vrf' smoke
<DETAILED DESCRIPTION (REPLACE)>
When shutting down, ensure that all VRFs including "configured" ones are
cleaned up properly.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-19069
Reviewed By: CCR-7011
Testing Done: Manual verification of failed scenario
A VRF is active only when the corresponding VRF device is present in the
kernel. However, when the kernel VRF device is removed, the VRF container in
FRR should go away only if there is no user configuration for it. Otherwise,
when the VRF device is created again so that the VRF becomes active, FRR
cannot take the correct actions. Example configuration for the VRF includes
static routes and EVPN L3 VNI.
Note that a VRF is currently considered to be "configured" as soon as the
operator has issued the "vrf <name>" command in FRR. Such a configured VRF
is not deleted upon VRF device removal, it is only made inactive. A VRF that
is "configured" can be deleted only upon operator action and only if the VRF
has been deactivated i.e., the VRF device removed from the kernel. This is
an existing restriction.
To implement this change, the VRF disable and delete actions have been modified.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mkanjariya@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-18553, CM-18918, CM-10139
Reviewed By: CCR-7022
Testing Done:
1. vrf and pim-vrf automation tests
2. Multiple VRF delete and readd (ifdown, ifup-with-depends)
3. FRR stop, start, restart
4. Networking restart
5. Configuration delete and readd
Some of the above tests run in different sequences (manually).
In EVPN symmetric routing, not all subnets are presents everywhere.
We have multiple scenarios where a host might not get learned locally.
1. GARP miss
2. SVI down/up
3. Silent host
We need a mechanism to resolve such hosts. In order to achieve this,
we will be advertising a subnet route from a box and that box will help
in resolving the ARP to such hosts.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
1. Added default gw extended community
2. code modification to handle sticky-mac/default-gw-mac as they go together
3. show command support for newly added extended community
4. State in zebra to reflect if a mac/neigh is default gateway
5. show command enhancement to refelect the same in zebra commands
Ticket: CM-17428
Review: CCR-6580
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Abstract the code that sends the zapi message into zebra
for the turn on/off of nexthop tracking for a prefix.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zclient->redist bitmap for vrf's was being set again
for the zclient_send_dereg_requests function. This should
be a unset on tear down.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
- Remove OSPD_SR route type
- Check that Segment Routing is enable only in default VRF
- Add comment for SRGB in lib/mpls.h
- Update documentation
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Because the VRF_ID is mapped into 32 bit, and because when NETNS will be
the backend of VRF, then the NS identifier must also be encoded as 32
bit.
Also, the NS_UNKNOWN value is changed accordingly to UINT32_MAX.
Also, the NS_UNKNOWN and NS_DEFAULT values are removed from zebra_ns.h
and kept on ns.h header file.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The number of vrf bitmap groups is increased so as to avoid consuming
too much memory. This fix is related to a fork memory that occured when
running pimd as daemon.
A check on memory consumed shows that the memory consumed goes from
33480ko to 46888ko with that change. This is less compared to if the
value of the bitmap groups is increased to 16 ( 852776ko).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is a preparatory work for configuring vrf/frr over netns
vrf structure is being changed to 32 bit, and the VRF will have the
possibility to have a backend made up of NETNS.
Let's put some history.
Initially the 32 bit was because one wanted to map on vrf_id both the
VRFLITE and the NSID.
Initially, one would have liked to make zebra configure at the same time
both vrf lite and vrf from netns in a flat way. From the show
running perspective, one would have had both kind of vrfs, thatone
would configure on the same way.
however, it leads to inconsistencies in concepts, because it mixes vrf
vrf with vrf, and vrf is not always mapped with netns.
For instance, logical-router could also be used with netns. In that
case, it would not be possible to map vrf with netns.
There was an other reason why 32 bit is proposed. this is because
some systems handle NSID to 32 bits. As vrf lite exists only on
Linux, there are other systems that would like to use an other vrf
backend than vrf lite. The netns backend for vrf will be used for that
too. for instance, for windows or freebsd, some similar
netns concept exists; so it will be easier to reuse netns
backend for vrf, than reusing vrflite backend for vrf.
This commit is here to extend vrf_id to 32 bits. Following commits in a
second step will help in enable a VRF backend.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is an implementation of draft-ietf-ospf-segment-routing-extensions-24
and RFC7684 for Extended Link & Prefix Opaque LSA.
Look to doc/OSPF_SR.rst for implementation details & known limitations.
New files:
- ospfd/ospf_sr.h: Segment Routing structure definition (SubTLVs + SRDB)
- ospfd/ospf_sr.c: Main functions for Segment Routing support
- ospfd/ospf_ext.h: TLVs and SubTLVs definition for RFC7684
- ospfd/ospf_ext.c: RFC7684 Extended Link / Prefix implementation
- doc/OSPF-SRr.rst: Documentation
Modified Files:
- doc/ospfd.texi: Add new Segment Routing CLI command definition
- lib/command.h: Add new string command for Segment Routing CLI
- lib/mpls.h: Add default value for SRGB
- lib/route_types.txt: Add new OSPF Segment Routing route type
- ospfd/ospf_dump.[c,h]: Add OSPF SR debug
- ospfd/ospf_memory.[c,h]: Add new Segment Routing memory type
- ospfd/ospf_opaque.[c,h]: Add ospf_sr_init() starting function
- ospfd/ospf_ri.c: Add new functions to Set/Get Segment Routing TLVs
Add new ospf_router_info_lsa_upadte() to send Opaque LSA to ospf_sr.c()
- ospfd/ospf_ri.h: Add new Router Information SR SubTLVs
- ospfd/ospf_spf.c: Add new scheduler when running SPF to trigger
update of NHLFE
- ospfd/ospfd.h: Add new thread for Segment Routing scheduler
- ospfd/subdir.am: Add new files
- vtysh/Makefile.am: Add new ospf_sr.c file for vtysh
- zebra/kernel_netlink.c: Add new OSPF_SR route type
- zebra/rt_netlink.[c,h]: Add new OSPF_SR route type
- zebra/zebra_mpls.h: Add new OSPF_SR route type
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
There are some observed instances where we end up trying to cancel a rw
job based on a file descriptor that we don't have a reference on. The
specific cancel function for rw jobs assumes it's called with a file
descriptor that is valid within pollfds and will cause a segmentation
fault by buffer overrun if this is not the case.
Instead log it and move on. Since the fd does not exist this should
patch over the buggy behavior and provide additional information to help
in finding the root cause.
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Modify if_lookup_by_index to accept a VRF_UNKNOWN
as a vrf_id. This will cause it to look in all
vrf's for the interface pointer.
Subsequently all if_XXXX functions that call this function
will also get this behavior.
VRF_UNKNOWN *should* not be used for interface creation
as that this will break some core assumptions.
This work is part of allowing vrf route leaking. Currently
it is possible to create a route in the linux kernel that has
a nexthop across vrf boundaries.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zapi_ipv4_route, zapi_ipv6_route and zapi_ipv4_route_ipv6_nexthop
functions are deprecated. Add notice of when we can remove the
deprecated code from the system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The constant to limit # of allowed cli tokens on any one line was
defined in multiple places, all inconsistent with each other. Fix.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Fix rare failure caused when end pointer is at end of buffer memory
and a call to ringbuf_get() is made that reads all of the data in the
buffer; start pointer was advanced past end pointer, causing some
special handling to be skipped
* Fix ringbuf_peek() moving start pointer
* Fix use after free
* Remove extraneous assignment
* Update relevant tests
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Peek functionality for ring buffers and associated tests.
Also:
* Slight optimization to avoid 0-byte memcpy() by changing > to >=
* Add rv checks for some ringbuf_[put|get] calls that were missing them
in the test
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
CLI config for enabling/disabling type-5 routes
router bgp <as> vrf <vrf>
address-family l2vpn evpn
[no] advertise <ipv4|ipv6|both>
loop through all the routes in VRF instance and advertise/withdraw
all ip routes as type-5 routes in default instance.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The $Id: lines would allow code kept in cvs to substitute
the file version upon checkout. Since we are not using
cvs there is no need to keep these lines anymore.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
ptm_lib.c had no way to cleanup after itself when an
error was detected. This adds a function to cleanup
context in such a case.
A followup commit will use this new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some of the deprecated stream.h macros see such little use that we may
as well just remove them and use the non-deprecated macros.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When we remove a thread from a pqueue, use the saved
index to go to the correct spot immediately instead of
having to search the whole queue for it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This should be allowed:
robot(config)# ip prefix-list outbound_asp_routes seq 33 permit 1.1.1.0/24 le 24
% Invalid prefix range for 1.1.1.0/24, make sure: len < ge-value <= le-value
This commit fixes the issue:
robot(config)# ip prefix-list outbound_asp_routes seq 33 permit 1.1.1.0/24 le 23
% Invalid prefix range for 1.1.1.0/24, make sure: len < ge-value <= le-value
robot(config)# ip prefix-list outbound_asp_routes seq 33 permit 1.1.1.0/24 le 24
robot(config)# ip prefix-list outbound_asp_routes seq 33 permit 1.1.1.0/24 le 25
robot(config)#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a daemon that will allow us to test the zapi
as well as test route install/removal times from
the kernel.
The current commands are:
install route <starting ip address> nexthop <nexthop> (1-1000000)
This command starts installing at <starting ip address>/32
(1-100000) routes that it auto-increments by 1
Installation start time is noted in the log and finish
time is noted as well.
remove routes <starting ip address> (1-1000000)
This command removes routes at <starting ip address>/32
and removes (1-100000) routes created by the install route
command.
This code can be considered experimental and *is not*
something that should be run in a production environment.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the higher level protocol to specify if it would
like to receive notifications about it's routes that
it has installed.
I've purposely made it part of zclient_new_notify because
we need to track the routes on a per daemon basis only.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Provide ZAPI code that can pass to an upper level protocol
what happened to it's route on install.
There are these notifications:
1) ZAPI_ROUTE_FAIL_INSTALL - The route attempted to be
installed did not work.
2) ZAPI_ROUTE_BETTER_ADMIN_WON - A route that was installed
has become un-installed due to another routing protocol
installing a better admin distance
3) ZAPI_ROUTE_INSTALLED - The route specified has been installed
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Define JSON_C_TO_STRING_NOSLASHESCAPE used for
escaping forward slash.
Disply json output for
'show ip ospf route [vrf all] json'
Ticket:CM-18659
Reviewed By:
Testing Done:
Configure multiple non-default VRF, inject external routes
via redistribute to ospf area.
checked show ip ospf route vrf all /json based output.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add write callback.
Add error callback.
Add frrzmq_check_events() function to check for edge triggered things
that may have happened after a zmq_send() call or so.
Update ZMQ tests.
Signed-off-by: ßingen <bingen@voltanet.io>
The safi encode/decode is using 2 bytes, which
may cause problems on some platforms. Let's assume
that a safi is a uint8_t and work accordingly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code modifies zebra to use the STREAM_GET functionality.
This will allow zebra to continue functioning in the case of
bad input data from higher level protocols instead of crashing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Currently when stream reads fail, for any reason, we assert.
While a *great* debugging tool, Asserting on production code
is not a good thing. So this is the start of a conversion over
to a series of STREAM_GETX functions that do not assert and
allow the developer a way to program this gracefully and still
clean up.
Current code is something like this( taken from redistribute.c
because this is dead simple ):
afi = stream_getc(client->ibuf);
type = stream_getc(client->ibuf);
instance = stream_getw(client->ibuf);
This code has several issues:
1) There is no failure mode for the stream read other than assert.
if afi fails to be read the code stops.
2) stream_getX functions cannot be converted to a failure mode
because it is impossible to tell a failure from good data
with this api.
So this new code will convert to this:
STREAM_GETC(client->ibuf, afi);
STREAM_GETC(client->ibuf, type);
STREAM_GETW(client->ibuf, instance);
....
stream_failure:
return;
We've created a stream_getc2( which does not assert ),
but we need a way to allow clean failure mode handling.
This is done by macro'ing stream_getX2 functions with
the equivalent all uppercase STREAM_GETX functions that
include a goto.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit adds support for the RTR protocol to receive ROA
information from a RPKI cache server. That information can than be used
to validate the BGP origin AS of IP prefixes.
Both features are implemented using [rtrlib](http://rtrlib.realmv6.org/).
Signed-off-by: Marcel Röthke <marcel.roethke@haw-hamburg.de>
When we have a v4 or v6 prefix list, only
apply it via a match when the address families
are the same.
Fixes: #1339
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When using a non-integrated config and starting up
of a protocol daemon, we were not properly handling
all possible cases and as such when an user hit
an actual error they were getting (null) listed
for the message string.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This function is only called with non-blocking sockets [1], so there's
no need to worry about setting O_NONBLOCK and unsetting it later if the
given fd was a blocking socket. This saves us 4 syscalls per connect,
which is not much but is something.
Also, remove an outdated comment about the return values of this
function. It returns a 'connect_result' enum now, whose values are
self-explanatory (connect_error, connect_success and connect_in_progress).
This also fixes a coverity scan warning where we weren't checking the
return value of the fcntl() syscall.
[1] bgp_connect() and pim_msdp_sock_connect().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These are mostly trivial fixes for leaks in the error path of some functions.
The changes in bgpd/bgp_mpath.c deserves a bit of explanation though. In
the bgp_info_mpath_aggregate_update() function, we were allocating memory
for the lcomm variable but doing nothing with it. Since the code for
communities, extended communities and large communities is pretty much
the same in this function, it's clear that this was a copy and paste
error where most of the ext. community code was copied but not all of
it as it should have been.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Note: I had to remove one assert in clidef.py in order to fix a build
error when using a preprocessor string (FRR_IP_REDIST_STR_ZEBRA) inside
a DEFPY command. This should be revisited later.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When displaying thread cpu data, display unsigned instead
of signed data when we get really really really large
numbers of invocations.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When free'ing memory associated with the wgraph, also
free memory malloced during the initialization.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
route_node_set is only called by route_node_get
which calls apply_mask. There is no need to do
this again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need to generate a hash key *if* the hash_alloc_function
is NULL and the hash is empty.
This changed showed a measurable increase in performance for
table hash lookup for tables that were meant to be empty in
bgp( the distance commands ).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When free'ing the workqueue if you have items
on the workqueue you should free the memory associated
with it.
Additionally move the work_queue_item_remove function
to allow for static to be awesome
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We expect that the index value passed in for argv_find
should be initially set to 0. This way if the cli
ever changes there is no need to modify the initial
value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If the p1 and p2 arguments pointed to identical strings ending with
a non-numeric character (e.g. "lo"), this function would return -1
instead of 0 as one would expect. This inconsistency didn't matter
for sorted linked-lists but for red-black trees it's a major source
of problems.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Performance tests showed that, when running on a system with a large
number of interfaces, some daemons would spend a considerable amount
of time in the if_lookup_by_index() function. Introduce a new rb-tree
to solve this problem.
With this change, we need to use the if_set_index() function whenever
we want to change the ifindex of an interface. This is necessary to
ensure that the 'ifaces_by_index' rb-tree is updated accordingly. The
return value of all insert/remove operations in the interface rb-trees
is checked to ensure that an error is logged if a corruption is
detected.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
IFINDEX_DELETED is not necessary anymore as we moved from a global
list of interfaces to a list of interfaces per VRF.
This reverts commit 84361d615.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Make use of strnlen() and strlcpy() so we can get rid of these
convoluted if_*_by_name_len() functions.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The compiler cannot guess that rise() will not return here.
One should help.
Warning:
Access to field 'file' results in a dereference of a null pointer
(loaded from variable 'error')
aka error->file while error is NULL.
Signed-off-by: Vincent Jardin <vincent.jardin@6wind.com>
Currenlty, this function is used only by:
- unit test of csv.c (see its main() section)
- ptm_lib.c
In case of ptm, it is safe to return NULL because:
csv_encode_record() -> return NULL
_ptm_lib_encode_header() -> return NULL
the only consumer of the return value is: ptm_lib_init_msg()
that checks the NULL return.
Warning:
Access to field 'field_len' results in a dereference of a null
pointer (loaded from variable 'fld')
Signed-off-by: Vincent Jardin <vincent.jardin@6wind.com>
We should assume match OK only when neither nhl1
and neither nhl2 are NULL.
If both are NULL, it means match NOK.
Clang Warning:
Access to field 'num_labels' results in a dereference of a null
pointer (loaded from variable 'nhl1')
Signed-off-by: Vincent Jardin <vincent.jardin@6wind.com>
Let's assert(NULL) if the datastructure is not set.
The code assumes that the pointer is always non NULL. So, let's enforce
this semantic.
Signed-off-by: Vincent Jardin <vincent.jardin@6wind.com>
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Current cleanup is for unset values or variables that are not used anymore.
Regarding ospfd/ospf_vty.c: argv_find()
we'll never get it NULL, so get coststr = argv[idx]->arg;
The word Multiplier has been abbreviated to 'Mul' in
the output. This apparently is causing people
angst. Write word out.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
list_delete does not set the list pointer to NULL
Thus when we accidently use it later we happily write
off into lala land instead of crashing imediately
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Somehow F_SETLK was failing for me a couple of days ago, and not being
able to see the errno value was frustrating.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is a fallout from PR #1022 (zapi consolidation). In the early days,
the client daemons would allocate enough memory to send all nexthops
to zebra. Then zebra would add all nexthops to the RIB and respect
MULTIPATH_NUM only when installing the routes in the kernel. Now things
are different and the client daemons can send at most MULTIPATH_NUM
nexthops to zebra, and failure to respect that will result in a buffer
overflow. The MULTIPATH_NUM limit in the new zebra API is a small price
we pay to avoid allocating memory for each route sent to zebra.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This fixes the following
cel-redxp-10# show debugging
Debugging Information for zebra:
Zebra debugging status:
Debugging Information for bgpd:
BGP debugging status:
Debugging Information for watchfrr:
% Command incomplete.
% Command incomplete.
cel-redxp-10#
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
VARIABLE tokens must be all uppercase, this allows us to support WORD
tokens that begin with an uppercase letter. The "Null0" keyword is an
example of where this is needed.
The only VARIABLE we had that wasn't already all uppercase was
ASN:nn_or_IP-address:nn
When matching user input against a CLI graph, we keep a stack of tokens
matched. Stack size was limited to 64, making the effective number of
tokens that could be entered on a line 64. This is too limiting in some
circumstances, so bump it to 256 (and document it).
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Tentative thread-safety support for zlog. Functions designed to be
called from signal handlers are not mt-safe.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
There exists situations where it is possible to have duplicate
nexthops passed from a higher level protocol into zebra.
This code notices this duplication of nexthops and marks
the duplicates as DUPLICATE so we don't attempt to install
it into the kernel.
This is important on *BSD as I understand it because passing
duplicate nexthops will cause the route to be rejected.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) Some hash key functions where converting pointers
directly to a 32 bit value via downcasting. Pointers
are 64 bit on a majority of our platforms.
2) Some hashes were being created with 256 entries,
downsize the hash creation size to more appropriate
values.
3) Add hash names to hash creation so we can watch
the hash via 'show debugging hashtable'
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There are 3 different implementations of is_prefix.
Standardize on is_prefix_default and fix it's implementation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
If the user configures some command that is already in the config we
should return CMD_WARNING instead of CMD_WARNING_CONFIG_FAILED
Create a new function prefix_list_apply_which_prefix which
will return a pointer to the matching prefix that caused
the acceptance/denial.
This change will be used in future commits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There are a variety of cli's associated with the
'set metric ...' command. The problem that we
are experiencing is that not all the daemons
support all the varieties of the set metric
and the returned of NULL during the XXX_compile
phase for these unsupported commands is causing
issues. Modify the code base to only return
NULL if we encounter a true parsing issue.
Else we need to keep track if this metric
applies to us or not.
In the case of rip or ripngd if the metric
passed to us is greater than 16 just turn
it internally into a MAX_METRIC.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vty_frame() can be used to reduce the amount of output produced by "show
running-config" and "write ...". It buffers output in struct vty->frame
(1024 bytes) and outputs it when vty_out is called. If vty_out isn't
called, it can be removed with vty_endframe() later.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
This allows running the daemons inside of Linux network namespaces
without messing with an additional mount/fs namespace (or a ton of
options).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This uses zmq_getsockopt(ZMQ_FD) to create a libfrr read event, which
then wraps zmq_poll and calls an user-specified ZeroMQ read handler.
It's wrapped in a separate library in order to make ZeroMQ support an
installation-time option instead of build-time.
Extended to support per-message and per-fragment callbacks as discussed
with Bingen in PR #566.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This provides an API to pass around extra information for errors, more
than a simple return value can carry. This is particularly used for the
Cap'n Proto interface to be able to report more useful errors.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
blackhole support was horribly broken. cleanup by removing blackhole
stuff from ZEBRA_FLAG_*
introduces support for "prohibit" routes (Linux/netlink only)
also clean up blackhole options on "ip route" vty commands.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
FLAG_BLACKHOLE is used for different things in different places. remove
it from the zclient API, instead indicate blackholes as proper nexthops
inside the message.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Specifically, gcc 4.2.1 on OpenBSD 6.0 warns about these; they're bogus
(gcc 4.2, being rather old, isn't quite as "intelligent" as newer
versions; the newer ones apply more logic and less warnings.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
In certain situations, the CLI matcher would not handle ambiguous
commands properly. If it found an ambiguous result in a lower subgraph,
the ambiguous result would not correctly propagate up to previous frames
in the resolution DFS as ambiguous; instead it would propagate up as a
non-match, which could subsequently be overridden by a partial match.
Example CLI space:
show ip route summary
show ip route supernet-only
show ipv6 route summary
Entering `show ip route su` would result in an ambiguous resolution for
the `show ip route` subgraph but would propagate up to the `show ip`
subgraph as a no-match, allowing `ip` to partial-match `ipv6` and
execute that command.
In this example entering `show ip route summary` would disambiguate the
`show ip` subgraph. So this bug would only appear when entering input
that caused ambiguities in at least two parallel subgraphs.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add the RMAP_COMPILE_SUCCESS and switch over to using it.
Refactoring allows a removal of a if statement to just
use the switch statement already in place. Additionally
the reworking cleans up memory freeing in a couple of spots.
In one spot we no longer will leak memory too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Set default hostname in frr to unix hostname.
Provide APIs to get the hostname/domaninanme
Use this APIs where needed
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
If we assign MULTIPATH_NUM to be 256, this causes issues
for us since 256 is bigger than a u_char. So let's make
the api's multipath_num to be a u_int16_t and pass it
around as a word.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some differences compared to the old API:
* Now the redistributed routes are sent using address-family
independent messages (ZEBRA_REDISTRIBUTE_ROUTE_ADD and
ZEBRA_REDISTRIBUTE_ROUTE_DEL). This allows us to unify the ipv4/ipv6
zclient callbacks in the client daemons and thus remove a lot of
duplicate code;
* Now zebra sends all nexthops of the redistributed routes to the client
daemons, not only the first one. This shouldn't have any noticeable
performance implications and will allow us to remove an ugly exception
we had for ldpd (which needs to know all nexthops of the redistributed
routes). The other client daemons can simply ignore the nexthops if
they want or consult just the first one (e.g. ospfd/ospf6d/ripd/ripngd).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
With prefix_ptr or prefix_ls, there can still be stuff in a struct
prefix that we shouldn't hash.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Also fixes misuse of vector_slot() - that one doesn't check for access
beyond end of vector...
And print node names in grammar sandbox "printall".
Fixes: #543
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Register add/delete hooks with the prefix list code to properly change
ospf6_area's prefix list in/out pointers.
There are 2 other uncached uses of prefix lists in the ASBR route-map
code and the interface code; these should probably be cached too. (To
be fixed another day...)
Fixes: #453
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
if we're using --terminal, the daemon may in some cases exit fast enough
for the parent to see this; this resulted in a confusing/bogus "failed
to start, exited 0" message.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
adds a new all-daemon "debug memstats-at-exit" command. Also saves
memstats to a file in /tmp, useful if a long-running daemon is having
weird issues (e.g. in a user install).
Fixes: #437
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
As noticed in 657cde1, the zapi_ipv[4|6]_route functions are broken in
many ways and that's the reason that many client daemons (e.g. ospfd,
isisd) need to send handcrafted messages to zebra.
The zapi_route() function introduced by Donald solves the problem
by providing a consistent way to send ipv4/ipv6 routes to zebra with
nexthops of any type, in all possible combinations including IPv4 routes
with IPv6 nexthops (for BGP unnumbered routes).
This patch goes a bit further and creates two new address-family
independent ZAPI message types that the client daemons can
use to advertise route information to zebra: ZEBRA_ROUTE_ADD and
ZEBRA_ROUTE_DELETE. The big advantage of having address-family independent
messages is that it allows us to remove a lot of duplicate code in zebra
and in the client daemons.
This patch also introduces the zapi_route_decode() function. It will be
used by zebra to decode route messages sent by the client daemons using
zclient_route_send(), which calls zapi_route_encode().
Later on we'll use this same pair of encode/decode functions to
send/receive redistributed routes from zebra to the client daemons,
taking the idea of removing code duplication to the next level.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This patch introduces the following changes to the zapi_route structure
and associated code:
* Use a fixed-size array to store the nexthops instead of a pointer. This
makes the zapi_route() function much easier to use when we have multiple
nexthops to send. It's also much more efficient to put everything on
the stack rather than allocating an array in the heap every time we
need to send a route to zebra;
* Use the new 'zapi_nexthop' structure. This will allow the client daemons
to send labeled routes without having to allocate memory for the labels
(the 'nexthop' structure was designed to be memory efficient and doesn't
have room for MPLS labels, only a pointer). Also, 'zapi_nexthop' is more
compact and more clean from an API perspective;
* Embed the route prefix inside the zapi_route structure. Since the
route's prefix is sent along with its nexthops and attributes, it makes
sense to pack everything inside the same structure.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
route_node->lock is "const" if --enable-dev-build is used. This is done
to deter people from messing with internals of the route_table...
unfortunately, the inline'd route_[un]lock_node runs into this.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Change all callers of IPV4_ADDR_SAME() to pass a pointer to a struct in_addr
Use assignment and comparison instead of memcpy() and memcmp(). Avoids function
calls. Faster.
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
Convert the work queue implementation to not use the generic linked list
to mantain the item list and use instead a simple queue from queue.h that
does not allocate memory for each node.
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
The simple queue implementation in OpenBSD and FreeBSD are called diferently,
standardize in the use of the FreeBSD version and map the missing names only
if we compile on OpenBSD.
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
This allows modules to register their own additional hooks on interface
creation/deletion.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Start creating a counterpart to frr_init and frr_late_init.
Unfortunately, some daemons don't do any exit handling, this doesn't
change that just yet.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Allow registering callbacks with a priority value used to order them
relative to each other. Plus a reverse variant that just flips the
direction on priorities.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The specific code here needs to establish an absolute order of more
specific to less specific possible matches in a prefix list. This is
indirectly checked by an assert on insertion, because the "next best"
entry is required to be consistent even when joining multiple chains
of candidates.
Unfortunately, trie_install_fn() would insert entries too far ahead in
the chain if another entry with higher sequence number was seen. This
breaks the trie and (rightfully) triggers the assertion failure on
insert.
Fixes: #937
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
c9c8d0d ("lib: close stdin/out/err in non-terminal case") overshot its
goal and closes stdin/stdout/stderr even when a daemon is running in
foreground. That means stdout logging & exit memory reporting are both
broken.
Reported-by: Lou Berger <lberger@labn.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
ospfd crashes upon configuring multi-instance ospf
i.e 'router ospf x'.
ospfd can return CMD_NOT_MY_INSTANCE which
is not supported in lib/commands
Support two of the error codes
CMD_NOT_MY_INSTANCE and CMD_WARNING_CONFIG_FAILED
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
This bgp-specific command had its positive form defined only in bgpd and
its negative form defined only in lib, which broke the whole rule for
other daemons.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
- couldn't load back written configs because it was trying to parse
"any" as MAC address
- don't need special-casing in filter_match_zebra(), exact is going to
be 0 for AF_ETHERNET anyway
- some vty formatting was slightly different
- is_zero_mac now static to prefix.c
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Previous strategy was to resize the hash table when the length of any
one bucket exceeded a certain size, with some logic for intelligently
stopping resizes when the gains from doing so weren't sufficient. While
this was a good idea that attempted to optimize both space and lookup
time, unfortunately under transient degenerate conditions this led to
some issues with the tables not resizing when they should have,
harming performance. The resizing restriction was lifted, but this had
the result of exacerbating degenerate behavior and caused out of memory
conditions.
This patch changes the hash expansion criterion to be based on the
number of elements in the table. Once the # of elements in the table
exceeds the number of buckets, the table size is doubled. While the
space efficiency of this method decreases relative to the perfectness of
the hash function, at least this strategy puts the table performance
squarely in the hands of the hash function.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If we receive a notification from zebra indicating that the installation
of a pseudowire has failed (e.g. no reachability), send a PW Status
notification to the remote peer (or a Label Withdraw if the remote peer
doesn't support the PW Status TLV).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Base framework for supporting MPLS pseudowires in FRR.
A consistent zserv interface is provided so that any client daemon
(e.g. ldpd, bgpd) can install/uninstall pseudowires in a standard
way. Static pseudowires can also be implemented by using the same
interface.
When zebra receives a request to install a pseudowire and the installation
in the kernel or hardware fails, a notification is sent back to the
client daemon and a new install attempt is made every 60 seconds (until
it succeeds).
Support for external dataplanes is provided by the use of hooks to
install/uninstall pseudowires.
Signed-off-by: ßingen <bingen@voltanet.io>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If OSPF_LS_REFRESH_TIME is 60, min_delay in ospf_refresher_register_lsa
function (ospf_lsa.c) would be negative, so index (which is unsigned)
would be out of range, causing a segfault.
Signed-off-by: ßingen <bingen@voltanet.io>
watchfrr doesn't know if there will be -u/-g options on the individual
daemons, so it doesn't know what the appropriate ownership is.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Disable this in the code to make it hard for people to shoot themselves
in the foot. It's only left as a remnant for development use.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There is no need for special casing of mac addresses,
since the mac address is it's own type integrated
into `struct prefix` now.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Added support to create mac filters
2. Enabled route-map commands for EVPN address family
3. Provision to add mac filters under match clause in route-maps
Ticket: CM-16349
Review: CCR-6190
Unit-test: Manual (logs attached to ticket)
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The defines:
ONE_DAY_SECOND
ONE_WEEK_SECOND
ONE_YEAR_SECOND
were being defined all over the system, move the
define to a central location.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This adds "@tcp" as new choice on the -z option present in zebra and the
protocol daemons. The --enable-tcp-zebra option on configure is no
longer needed, both UNIX and TCP socket support is always available.
Note that @tcp should not be used by default (e.g. in an init script),
and --enable-tcp-zebra should never have been in any distro package
builds, because
**** TCP-ZEBRA IS A SECURITY PROBLEM ****
It allows arbitrary local users to mess with the routing table and
inject bogus data -- and also ZAPI is not designed to be robust against
attacks.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Behind END_TKN, there is another graph node whose data pointer is
actually struct cmd_element instead of struct cmd_token. Don't try to
interpret that as cmd_token. This causes very interesting crashes when
ASLR decides to give one of the strings of a command definition a lower
32-bit value that is a valid cmd_token_type (e.g. FORK_TKN).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Multi-Instance OSPF configuration CLI would fail because
first client return error upon seeing qobj_index being 0.
With new marco generate new error code to return from each
instance (vtysh client) and if the command is intended for given
instance, its qobj_index would be nonzero and process the command
and push correct ospf context. Other instance would return the error.
On vtysh end, check all instance return an error log a message to a
file.
Testing Done:
Verfied various MI-OSPF configuration CLI with multi instances.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
From discussion we decided that we should use ETH_ALEN instead
of ETHER_ADDR_LEN. Add ETH_ALEN to prefix.h and make
ETHER_ADDR_LEN generate a warning when used( but still work ).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since we were only setting vty->wfd in config_write, vty->fd would
remain 0 and vty_close() wouldn't close vty->wfd.
Clean up the entire fd closing and make it more explicit. We were even
trying to write to stdin...
Reported-by: Jorge Boncompte <jbonor@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
BUILT_SOURCES doesn't do what the name suggests. What it actually means
is "these files should be built first when doing a 'make' without
explicit target" (or "make all").
It's pretty much almost always wrong to use BUILT_SOURCES, the only
correct use is when a file is needed by an unspecified / large set of
files.
Also remove version.h and route_types.h from dist tarball while we're at
it. configure will create them anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Oops, forgot this path... in the --terminal case, stdio is closed when
the user ends the terminal session, but without terminal it was left
open.
(This caused a ssh session hang in the CentOS6 CI because the file
descriptors were still open, so ssh would keep the session alive...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Now that the logging hole is plugged, we can just print config-loading
errors to the log. This has 2 hidden advantages:
- vty_read_config calls in SIGHUP don't print errors to /dev/null
- errors are consistently printed to syslog on --enable-cumulus
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
zlog_* doesn't work in startup before we've loaded the real logging
configuration. Add some code to log to stderr for that window of time.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If the paths for pid or vty don't exist, try creating them. Failure is
ignored (on EEXIST) or prints a non-fatal warning (other errors).
Fixes: #507
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This splits off privs_preinit(), which does the lookups for user and
group IDs. This is so the init code can create state directories while
still running as root.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The OpenBSD's cp(1) command doesn't support the -v option. This will
change in the next releases (starting from v6.2) but this patch fixes
the problem for v6.1 and older releases.
Fixes Issue #875.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
- SIGTSTP appropriately suspends the foreground terminal
- SIGINT causes the daemon to exit, regardless of -d
- SIGQUIT causes the daemon to daemonize, regardless of -d
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Block the parent process until the child has reached the main loop, e.g.
full service is available.
This means it's no longer neccessary to add a "safety sleep" for daemon
cross-dependencies, when using the -d startup option. This doesn't help
if -d isn't used.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Linux -> TCP_CORK is enabled by default
*BSD -> The equivalent is TCP_NOPUSH
As such sockopt_cork is effectively useless
especially since the two places it is used
do it right before TCP writes then disable
it right after the writes are over.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch statements are more elegant (and potentially faster... but that's
not the main motivation).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
SAFI values have been a major source of confusion over the last few
years. That's because each SAFI needs to be represented in two different
ways:
* IANA's value used to send/receive packets over the network;
* Internal value used for array indexing.
In the second case, defining reserved values makes no sense because we
don't want to index SAFIs that simply don't exist. The sole purpose of
the internal SAFI values is to remove the gaps we have among the IANA
values, which would represent wasted memory in C arrays. With that said,
remove these reserved SAFIs to avoid further confusion in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
swpX peers all start out with the same sockunion so initially they all
go into the same hash bucket. Once IPv6 ND has worked its magic they
will have different sockunions and will go in different buckets...life
is good.
Until then though, we are in a phase where all swpX peers have the same
socknunion. Once we have HASH_THRESHOLD (10) swpX peers and call
hash_get for a new swpX peer the hash code calls hash_expand(). This
happens because there are more than HASH_THRESHOLD entries in a single
bucket so the logic is "expand the hash to spread things out"...in our
case expanding doesn't spread out the swpX peers because all of their
sockunions are the same.
I looked at having peer_hash_make and peer_hash_same consider the ifname
of the swpX peer but that is a large change that we don't want to make
at the moment. So the fix is to put a cap on how large we are
willing to let the hash table get. By default there is no limit but if
max_size is set we will not allow the hash to expand above that.
Adds an array of descriptive names for each CLI node, plus a runtime
check to make sure folks don't forget to update it.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Commit 8f942af90 introduced a bug while silencing a clang warning. Silence
the warning in a different way to fix our red-black tree implementation.
Fixes#841.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We should preserve the original indentation to make it easier to keep
these files in sync with the upstream.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The pimregX devices when created by the kernel are put into
the default vrf. When pim gets the callback that the device
exists, check to see if it is a pimregX device and if so
move it into the appropriate vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Before the fix NHT had each path resolving via swp1
cel-redxp-10# show ip route 20.0.11.253
Routing entry for 20.0.11.0/24
Known via "bgp", distance 20, metric 0, best
Last update 00:00:20 ago
* 169.254.0.1, via swp1
* 169.254.0.17, via swp2
cel-redxp-10#
cel-redxp-10# show ip nht
[snip]
20.0.11.253
resolved via bgp
via 169.254.0.1, swp1
via 169.254.0.1, swp1
Client list: pim(fd 19)
After the fix
cel-redxp-10# show ip nht
[snip]
20.0.11.253
resolved via bgp
via 169.254.0.1, swp1
via 169.254.0.17, swp2
Client list: pim(fd 19)
A {foo|bar|baz} graph node will have more than 1/2 incoming links even
if no other references are left to it (which is what the assert was
previously trying to ensure.)
I don't see a good way to "fix" the assert so I'm just removing it.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The label initializer & nhrpd variable are just to shut up GCC 7,
the other two are actual bugs.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
