EVPN prefix depends on the EVPN route type.
Currently, in FRR we have a prefix_evpn/evpn_addr which relates to a evpn prefix.
We need to convert this to encompass an union of various EVPN route-types.
This diff handles the necessary code changes to adopt the new struct evpn_addr.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Add a policy-route API to handle flowspec entry.
The entry is analysed, converted, and
selected if it is possible to inject the flowspec entry in local policy
routing entries.
redirect IP and redirect VRF actions are handled. The former extracts
the IPv4 address to redirect traffic to. The latter calculates the
matching VRF to redirect traffic to.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As part of recent vpn-vrf leaking changes, it is now possible for a
route to refer to a nexthop in a different vrf. There is also a new
route flag that means "when announcing this route, indicate myself
as the next-hop."
route_vty_out(): nexthops are appended with:
"@VRFID" (where VRFID is the numerical vrf id) when different from
the route's vrf;
"<" when the route's BGP_INFO_ANNC_NH_SELF is set
This change also shows the route table's vrf id in the table header.
route_vty_out_detail(): show nexthop's vrf and announce-nh-self flag if
appropriate.
Both functions are also augmented to add json elements nhVrfId, nhVrfName,
and announceNexthopSelf as appropriate.
The intent of these changes is to make it easier to understand/debug
the relationship between a route and its nexthops.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
The vrf 2 vrf route leaking auto-derives RD and RT and
installs the routes into the appropriate vpn table.
These routes when a operator configured ipv[4|6] vpn
neighbors were showing up off box. The RD and RT
values choosen are localy significant but globaly
useless and may cause confusion.
Put a special bit of code in to notice that we
should not be advertising these routes off box.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Here we have a block conditional on the nullity of a pointer, followed
by a dereferennce of the same pointer. Move the deref into the
conditional block.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Most presumably, the nexthop IP is present, only when ECOM redirect IP
is present. The nexthop is displayed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Routes that have labels must be sent via a nexthop that also has labels.
This change notes whether any path in a nexthop update from zebra contains
labels. If so, then the nexthop is valid for routes that have labels.
If a nexthop update has no labeled paths, then any labeled routes
referencing the nexthop are marked not valid.
Add a route flag BGP_INFO_ANNC_NH_SELF that means "advertise myself
as nexthop when announcing" so that we can track our notion of the
nexthop without revealing it to peers.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
This command gives detail about a FS entry which contains an IP that
matches one of the rules of the FS entry. The output is the same output
as when one does show bgp ipv4 flowspec detail
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The json format is returd when requested from the two commands:
- show bgp ipv4 flowspec
- show bgp ipv4 flowspec detail
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The show bgp ipv4 flowspec routine is made available, displays the
flowspec rules contained in the BGP FIB database, as well as the actions
to be done on those rules. Two routines are available:
show bgp ipv4 flowspec
show bgp ipv4 flowspec detail
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Flowspec entries do not need aggregation feature.
Actually, all flowspec entries are unique.
So, some check is done against aggregate functionalities in the code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Ensure that only EVPN routes are flagged as such when installing into or
withdrawing from zebra, the earlier check broke L3VPN or VRF route-leaked
routes. Also, fix an incorrect check related to imported routes in path
selection.
Updates: bgpd: Use BGP_ROUTE_IMPORTED for EVPN [vivek]
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When uninstalling routes from zebra, ensure that the BGP instance for
which processing is being done is used to derive the VRF. It is incorrect
to derive the VRF from the peer when dealing with scenarios like VRF route
leaking, EVPN symmetric/external routing etc., where the peer which sourced
the route could belong to a different VRF.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ticket: CM-18413
Reviewed By: CCR-6778
Testing Done: Manual testing of BGP route withdraw/delete, bgp-min
When a peer is removed the routes are withdrawn via bgp_process_main_one
As such we need to put a bit of code in to handle this situation
for the vpn/vrf route leaking code.
I think this code path is also called for when a vrf's route is
changed and I believe we will end up putting a bit more code
here to handle the nexthop changes.
I've also started trying to document the bgp_process_main_one
function a bit better.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Set EVPN routes imported into a VRF to (sub)type BGP_ROUTE_IMPORTED and
use this for passing appropriate information to zebra. This is needed
because relying on the Router MAC for this purpose was incorrect and
impacted routing to/from external destinations, particularly for IPv6.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
In bgp_update_receive the first thing we do is establish
that the peer->status is Established. We then do a bunch
of work and call bgp_nlri_parse where we break out for
each address family. Each AFI is then checking for
being peer->status is Established again. There is no
point in checking this again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
- add "debug bgp vpn label" CLI
- improved debug messages for "debug bgp bestpath"
- send vrf label to zebra after zebra informs bgpd of vrf_id
- withdraw vrf_label from zebra if zebra informs bgpd that vrf_id is disabled
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Received PMSI tunnel attributes (in EVPN type-3 route) were not recognized.
Parse them and display the tunnel type when looking at routes. Note that
the only tunnel type currently supported is ingress replication (IR). A
warning message will be logged if the received tunnel type is something
else, but the attribute is otherwise ignored.
Updates: a21bd7a (bgpd: add PMSI_TUNNEL_ATTRIBUTE to EVPN IMET routes)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Type-5 routes can be useful in multiple scenarios such as advertise-subnet,
default-originate etc. Currently, the code has a restriction that to allow
advertising type-5 routes, user has to first enable advertise ipvX command.
This restriction is not necessary and should be removed.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
EVPN type-2 and type-5 routes received with a L3 VNI and corresponding RTs
are installed into the appropriate BGP RIB. Ensure that these routes are not
re-injected back into EVPN as type-5 routes when type-5 advertisement is
enabled; only regular IPv4 routes (and IPv6 routes in future) in the RIB
should be injected into EVPN.
As a benefit of this change, no longer restrict that EVPN type-5 routes
should be non-host routes - i.e., allow /32 IPv4 routes (and /128 IPv6
routes in future).
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ticket: CM-19456
Reviewed By: CCR-7117
Testing Done:
1. Manual replication of problem and verification of fix
2. evpn-min
Turns out we had 3 different ways to define labels
all of them overlapping with the same meanings.
Consolidate to 1. This one choosen is consistent
naming wise with what the *bsd and linux kernels
use.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When an IPv4 or IPv6 unicast route is injected into EVPN as a type-5 route
(upon user configuration), ensure that the source route (best path)'s path
attributes are used to build the EVPN type-5 route. This will result in
correct AS_PATH and ORIGIN attributes for the type-5 route so that it doesn't
appear that all type-5 routes are locally sourced. This is necessary to
ensure that external paths (IPv4 or IPv6 from EBGP peer) are preferred over
internal EVPN paths, if both exist.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-19051
Reviewed By: CCR-7009
Testing Done: Verify failed scenario
In EVPN symmetric routing, not all subnets are presents everywhere.
We have multiple scenarios where a host might not get learned locally.
1. GARP miss
2. SVI down/up
3. Silent host
We need a mechanism to resolve such hosts. In order to achieve this,
we will be advertising a subnet route from a box and that box will help
in resolving the ARP to such hosts.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
When doing symmetric routing,
EVPN type-2 (MACIP) routes need to be advertised with two labels (VNIs)
the first being the L2 VNI (identifying the VLAN) and
the second being the L3 VNI (identifying the VRF).
The receive processing needs to handle one or two labels too.
Ticket: CM-18489
Review: CCR-6949
Testing: manual and bgp/evpn/mpls smoke
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
-Werror=sign-compare is failing with signed/unsigned usage
in the conditional expression.
Fixes: #1593
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problems reported with inconsistent use of parameters for bgp network
statements. Converted 12 DEFUNs to 2 DEFPY statements, making the
parameter use consistent with the exception of keeping the "backdoor"
keywork ipv4 only. Also verified that if a route-map or label-index
is specified in the "no" case it matches what had been previously
defined. Manual testing looks good and bgp-smoke will be performed
before pushing.
Ticket: CM-16860
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-7056
The json code was freeing json_paths and then
turning around and free'ing it again. Newer
versions of json-c have started to assert
this bad behavior.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When bgp has a metric butt-load of routes w/ ecmp, this command
can take an inordinate amount of time to run and complete via
vtysh.
Converting the bgp route output in this case back to not
using the json pretty-print drops ~2 minutes of runtime
off.
It is assumed that if users would like pretty output they
can run it through an appropriate tool via a pipe command.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The prefix_rd2str uses a buffer size of RD_ADDRSTRLEN.
Modify the code to consistently use this for all of BGP.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ignoring the return from argv_find_and_parse_afi
makes the SA system assume that you could pass a AFI_MAX
value to bgp_show_route. Which in turn would cause
an array out of bounds read.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
So we have the ability to apply speculative route-maps to
neighbor display to see what the changes would look like
via some show commands. When we do this we make a
shallow copy of the attr data structure and then pass
it around for applying the routemap. After we've applied
this route-map and displayed it we really need to clean
up memory that the route-map application applied.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are applying an experimental route-map type
to a peer( as part of a show command ) save and
restore the peer's ->rmap_type.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we display the advertised-routes and we don't have a route-map
to apply do not re-apply the route-map. This does two things:
1) Fixes a display issue with the show command.
2) More importantly stops leaking memory like a sieve for when
you have a full bgp table.
Fixes: #1345
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit fixes a bug where json output would display
',,,,,,,' because we were deciding to not display information
about some routes due to a selection criteria.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Building a communities json object every time is
both expensive and memory wasteful. Modify
code to only build the json object when needed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The creation of the json object for the aspath
is both memory intensive and expensive to
create. Only create the json object when
it is needed and stash it for further usage
at that point.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When BGP is being redistributed prefixes, allow it to
understand the nexthop type.
This fixes the issue where a blackhole route was being interpreted
to having a nexthop of 1.0.0.0( ruh-roh!!! ). This broke
downstream neighbors as that they would receive a 1.0.0.0 nexthop,
which is bad, very very bad.
This commit sets us up for the future where we can match
a route-map against a nexthop type. In that bgp is
now at least nominally paying attention to the type.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ignore the return value of some functions in the places we know they
can't fail, and other small fixes.
Regarding the change in bgpd/rfapi/rfapi_rib.c, asserting that
rfapiRaddr2Qprefix() didn't fail is the common idiom inside the rfapi
code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These commands don't belong in the BGP_IPV6L_NODE node anymore. A similar
change was done for BGP_IPV4L_NODE in commit 9bedbb1e5.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The json option for displaying a bgp table
with route Distinguishers in it was not properly
working. This code cleans this issue up.
Additionally attempt to make the code a bit
easier to read and handle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Perf results at scale( >1k peers) showed a non-trivial
amount of time spent in bgp_multiaccess_check_v4. Upon
function examination we are looking up the nexthops
connected node in each call as well as having to unlock
it after each iteration. Rewrite to lookup the nexthop
node once.
This should reduce the node lookup by aproximately 1/2
which should yield some performance results. There are
probably better things to do here but would require
deeper thought.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
VARIABLE tokens must be all uppercase, this allows us to support WORD
tokens that begin with an uppercase letter. The "Null0" keyword is an
example of where this is needed.
The only VARIABLE we had that wasn't already all uppercase was
ASN:nn_or_IP-address:nn
bgp_route.c:6393:7: error: ‘len’ may be used uninitialized in this function
gcc 5.4.0 isn't intelligent enough to notice it's set on all paths.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Some of this was so egregiously stupid, I couldn't look at it without
gouging my eyes out...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
