==536197== 400 (160 direct, 240 indirect) bytes in 4 blocks are definitely lost in loss record 19 of 21
==536197== at 0x483DD99: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==536197== by 0x491C753: qcalloc (memory.c:116)
==536197== by 0x303FA9: aspath_dup (bgp_aspath.c:698)
==536197== by 0x304B2A: aspath_replace_specific_asn (bgp_aspath.c:1219)
==536197== by 0x256840: bgp_peer_as_override (bgp_route.c:1781)
==536197== by 0x256840: subgroup_announce_check (bgp_route.c:2216)
==536197== by 0x258345: subgroup_process_announce_selected (bgp_route.c:2804)
==536197== by 0x27F2CA: group_announce_route_walkcb (bgp_updgrp_adv.c:199)
==536197== by 0x4905A51: hash_walk (hash.c:285)
==536197== by 0x27E8D1: update_group_af_walk (bgp_updgrp.c:1866)
==536197== by 0x2809D3: group_announce_route (bgp_updgrp_adv.c:1022)
==536197== by 0x257DC4: bgp_process_main_one (bgp_route.c:3189)
==536197== by 0x257DC4: bgp_process_main_one (bgp_route.c:2975)
==536197== by 0x2581F7: bgp_process_wq (bgp_route.c:3330)
==536197== by 0x4961787: work_queue_run (workqueue.c:285)
==536197== by 0x4957745: thread_call (thread.c:2008)
==536197== by 0x4910B77: frr_run (libfrr.c:1198)
==536197== by 0x1ED6AC: main (bgp_main.c:520)
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
To resolve link dependencies of unordered interfaces, the commit
`520ebf72b27c2462ce8b0dc5a1d4cb83956df69c` has separated assignment of
`zif->link_ifindex` and `zif->link` from `netlink_interface()` during startup.
The fixup stage of `zebra_if_update_all_links()` goes into the last of
`interface_lookup_netlink()`, it can't be executed in the case of error in
above `netlink_parse_info()`s.
`RTM_GETTUNNEL` is not supported in linux kernel until 5.18, so
`netlink_parse_info()` will throw error with the previous versions.
If two conditions are met, (it is a common case)
1. Interfaces are created before frr restart/start
2. Linux kernel version < 5.18
the link dependencies will not be done, then evpn feature will be broken.
IMO we should just ignore this error.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
When using namespace VRF backend, and frr.conf contains:
vrf test
netns /run/netns/test
exit-vrf
FRR fails to start:
line 11: Failure to communicate[13] to zebra, line: netns /run/netns/test
Fix this by returning CMD_WARNING rather than CMD_WARNING_CONFIG_FAILED
when the same netns path is configured.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Don't hold the rcu lock in the bgp keepalive pthread: it
blocks the rcu pthread and prevents log-file deletion.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
It is not possible to build ospf_spf.c file with --disable-ospfapi because
ospf_apiserver.c has SUPPORT_OSPF_API around all function definitions and
that results in an undefined reference to the ospf_apiserver_notify_reachable
function error while building.
Signed-off-by: Michal Ruprich <mruprich@redhat.com>
Changing
PIM_DO_DEBUG_IGMP_EVENTS to PIM_DO_DEBUG_GM_EVENTS
PIM_DO_DEBUG_IGMP_PACKETS to PIM_DO_DEBUG_GM_PACKETS
PIM_DO_DEBUG_IGMP_TRACE to PIM_DO_DEBUG_GM_TRACE
PIM_DO_DEBUG_IGMP_TRACE_DETAIL to PIM_DO_DEBUG_GM_TRACE_DETAIL
PIM_DONT_DEBUG_IGMP_EVENTS to PIM_DONT_DEBUG_GM_EVENTS
PIM_DONT_DEBUG_IGMP_PACKETS to PIM_DONT_DEBUG_GM_PACKETS
PIM_DONT_DEBUG_IGMP_TRACE to PIM_DONT_DEBUG_GM_TRACE
PIM_DONT_DEBUG_IGMP_TRACE_DETAIL to PIM_DONT_DEBUG_GM_TRACE_DETAIL
PIM_MASK_IGMP_EVENTS to PIM_MASK_GM_EVENTS
PIM_MASK_IGMP_PACKETS to PIM_MASK_GM_PACKETS
PIM_MASK_IGMP_TRACE to PIM_MASK_GM_TRACE
PIM_MASK_IGMP_TRACE_DETAIL to PIM_MASK_GM_TRACE_DETAIL
to be used for both IGMP and MLD debugs.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Added Robustness value, Query interval, Query response timer
and Last member query interval field in json output.
Issue: #11891
Signed-off-by: Abhishek N R <abnr@vmware.com>
When redistributing connected addresses, the address family has
to be figured out. The calculation was not done, the next-hop
address length was not set, and as consequence, the nexthop
is displayed like if it was an ipv6 address, which is wrong for
ipv4 addresses.
Calculate the family for connected addresses.
Change the topotests accordingly.
Fixes: ("7226bc40d606") bgpd: ignore NEXT_HOP for MP_REACH_NLRI
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
RFC4364 describes peerings between multiple AS domains, to ease
the continuity of VPN services across multiple SPs. This commit
implements a sub-set of IETF option b) described in chapter 10 b.
The ASBR to ASBR approach is taken, with an EBGP peering between
the two routers. The EBGP peering must be directly connected to
the outgoing interface used. In those conditions, the next hop
is directly connected, and there is no need to have a transport
label to convey the VPN label. A new vty command is added on a
per interface basis:
This command if enabled, will permit to convey BGP VPN labels
without any transport labels (i.e. with implicit-null label).
restriction:
this command is used only for EBGP directly connected peerings.
Other use cases are not covered.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This test ensures that MPLS VPN routes can be installed into a
gre interface with route-map l3vpn next-hop encapsulation command
set. On the other hand, if this command is not set, incoming bgp
routes are not considered as valid.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When a route imported from l3vpn is analysed, the nexthop from default
VRF is looked up against a valid MPLS path. Generally, this is done on
backbones with a MPLS signalisation transport layer like LDP. Generally,
the BGP connection is multiple hops away. That scenario is already
working.
There is case where it is possible to run L3VPN over GRE interfaces, and
where there is no LSP path over that GRE interface: GRE is just here to
tunnel MPLS traffic. On that case, the nexthop given in the path does not
have MPLS path, but should be authorized to convey MPLS traffic provided
that the user permits it via a configuration command.
That commit introduces a new command that can be activated in route-map:
> set l3vpn next-hop encapsulation gre
That command authorizes the nexthop tracking engine to accept paths that
o have a GRE interface as output, independently of the presence of an LSP
path or not.
A configuration example is given below. When bgp incoming vpnv4 updates
are received, the nexthop of NLRI is 192.168.0.2. Based on nexthop
tracking service from zebra, BGP knows that the output interface to reach
192.168.0.2 is r1-gre0. Because that interface is not MPLS based, but is
a GRE tunnel, then the update will be using that nexthop to be installed.
interface r1-gre0
ip address 192.168.0.1/24
exit
router bgp 65500
bgp router-id 1.1.1.1
neighbor 192.168.0.2 remote-as 65500
!
address-family ipv4 unicast
no neighbor 192.168.0.2 activate
exit-address-family
!
address-family ipv4 vpn
neighbor 192.168.0.2 activate
neighbor 192.168.0.2 route-map rmap in
exit-address-family
exit
!
router bgp 65500 vrf vrf1
bgp router-id 1.1.1.1
no bgp network import-check
!
address-family ipv4 unicast
network 10.201.0.0/24
redistribute connected
label vpn export 101
rd vpn export 444:1
rt vpn both 52:100
export vpn
import vpn
exit-address-family
exit
!
route-map rmap permit 1
set l3vpn next-hop encapsulation gre
exit
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Changing the macros to common so that it can be used for pimv6 debugs as well
to be used for both IGMP and MLD debugs.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Changing the macros to common so that it can be used for pimv6 debugs as well
to be used for both IGMP and MLD debugs.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Runing most of isisd tests with --valgrind-memleaks give many memory errors.
This is due to the way isisd is stopped: performing a "no router isis XXX"
through CLI solves most of them. Indeed, isis_finish() doesn't call
isis_area_destroy() leaving many allocated memory unfreed.
This patch adds call to appropriate delete function or XFREE() when necessary to
properly free all alocated memory before terminating isisd.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
zebra can change l2vni's tenant vrf with new `vid`, and then notify bgpd
to change also. But this notification is wrongly missed, so bgpd knows
nothing about it. It affects evpn routes, which are related to tenant vrf.
Need to notify bgpd of the `vid` change.
Changes l2vni 100 of vxlan's `vid` so as to change its svi interface from
default to vrf1, then check bgp's vni status.
Before: (Ignored irrelevent columns)
```
host#show bgp l2vpn evpn vni
VNI Type RD Tenant VRF
* 100 L2 66.66.66.66:2 default <- No change
```
After:(Ignored irrelevent columns)
```
host#show bgp l2vpn evpn vni
VNI Type RD Tenant VRF
* 100 L2 66.66.66.66:2 vrf1 <- Updated
```
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Description:
Added hidden clis that will allow you to reset the default timers
for LSA refresh and LSA maxage remove delay, these will help in testing
LSA refresh scenarios in upcoming OSPFv2 Flood reduction feature(rfc4136).
IETF Link : https://datatracker.ietf.org/doc/html/rfc4136
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
A couple of pointers in do_thread_cancel() we only inited at
the start of the function; make sure they're inited during
each iteration of the loop.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
