The function vpn_leak_to_vrf_update_onevrf() has the RD parameter
set to NULL. Test the RD value before displaying it in the called
function.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
RD may be built based on an AS number. Like for the AS, the RD
may use the AS notation. The two below examples can illustrate:
RD 1.1:20 stands for an AS4B:NN RD with AS4B=65536 in dot format.
RD 0.1:20 stands for an AS2B:NNNN RD with AS2B=0.1 in dot+ format.
This commit adds the asnotation mode to prefix_rd2str() API so as
to pick up the relevant display.
Two new printfrr extensions are available to display the RD with
the two above display methods.
- The pRDD extension stands for dot asnotation format
- The pRDE extension stands for dot+ asnotation format.
- The pRD extension has been renamed to pRDP extension
The code is changed each time '%pRD' printf extension is called.
Possibly, the asnotation may change the output, then a macro defines
the asnotation mode to use. A side effect of forging the mode to
use is that the string could not be concatenated with other strings
in vty_out and snprintfrr. Those functions have been called multiple
times. When zlog_debug needs to display the RD with some other string,
the prefix_rd2str() old API is used instead of the printf extension.
Some code has been kept untouched:
- code related to running-config. Actually, wherever an RD is displayed,
its configured name should be dumped.
- bgp rfapi code
- bgp evpn multihoming code (partially done), since the logic is
missing to get the asnotation of 'struct bgp_evpn_es'.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
RFC7611 introduces new extended community ACCEPT_OWN and is already
implemented for FRR in the previous PR. However, this PR broke
compatibility about importing VPN routes.
Let's consider the following situation. There are 2 routers and these
routers connects with iBGP session. These routers have two VRF, vrf10
and vrf20, and RD 0:10, 0:20 is configured as the route distinguisher
of vrf10 and vrf20 respectively.
+- R1 --------+ +- R2 --------+
| +---------+ | | +---------+ |
| | VRF10 | | | | VRF10 | |
| | RD 0:10 +--------+ RD 0:10 | |
| +---------+ | | +---------+ |
| +---------+ | | +---------+ |
| | VRF20 +--------+ VRF20 | |
| | RD 0:20 | | | | RD 0:20 | |
| +---------+ | | +---------+ |
+-------------+ +-------------+
In this situation, the VPN routes from R1's VRF10 should be imported to
R2's VRF10 and the VPN routes from R2's VRF10 should be imported to R2's
VRF20. However, the current implementation of ACCEPT_OWN will always
reject routes if the RD of VPN routes are matched with the RD of VRF.
Similar issues will happen in local VRF2VRF route leaks. In such cases,
the route reaked from VRF10 should be imported to VRF20. However, the
current implementation of ACCEPT_OWN will not permit them.
+- R1 ---------------------+
| +------------+ |
| +----v----+ +----v----+ |
| | VRF10 | | VRF20 | |
| | RD 0:10 | | RD 0:10 | |
| +---------+ +---------+ |
+--------------------------+
So, this commit add additional condition in RD match. If the route
doesn't have ACCEPT_OWN extended community, source VRF check will be
skipped.
[RFC7611]: https://datatracker.ietf.org/doc/html/rfc7611
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
Before this patch we allowed importing routes between VRFs in the same node,
only for external routes, but not for local (e.g.: redistribute).
Relax here a bit, and allow importing local routes between VRFs when the RT
list is modified using route reflectors.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
```
unet> sh pe2 vtysh -c 'sh ip bgp ipv4 vpn detail-routes'
BGP table version is 4, local router ID is 10.10.10.20, vrf id 0
Default local pref 100, local AS 65001
Route Distinguisher: 192.168.2.2:2
BGP routing table entry for 192.168.2.2:2:10.0.0.0/24, version 1
not allocated
Paths: (1 available, best #1)
Not advertised to any peer
65000
192.168.2.1 from 0.0.0.0 (10.10.10.20) vrf RED(4) announce-nh-self
Origin incomplete, metric 0, localpref 50, valid, sourced, local, best (First path received)
Extended Community: RT:192.168.2.2:2
Originator: 10.10.10.20
Remote label: 2222
Last update: Tue Dec 20 13:01:20 2022
BGP routing table entry for 192.168.2.2:2:172.16.255.1/32, version 2
not allocated
Paths: (1 available, best #1)
Not advertised to any peer
65000
192.168.2.1 from 0.0.0.0 (10.10.10.20) vrf RED(4) announce-nh-self
Origin incomplete, localpref 50, valid, sourced, local, best (First path received)
Extended Community: RT:192.168.2.2:2
Originator: 10.10.10.20
Remote label: 2222
Last update: Tue Dec 20 13:01:20 2022
BGP routing table entry for 192.168.2.2:2:192.168.1.0/24, version 3
not allocated
Paths: (1 available, best #1)
Not advertised to any peer
65000
192.168.2.1 from 0.0.0.0 (10.10.10.20) vrf RED(4) announce-nh-self
Origin incomplete, localpref 50, valid, sourced, local, best (First path received)
Extended Community: RT:192.168.2.2:2
Originator: 10.10.10.20
Remote label: 2222
Last update: Tue Dec 20 13:01:20 2022
BGP routing table entry for 192.168.2.2:2:192.168.2.0/24, version 4
not allocated
Paths: (1 available, best #1)
Not advertised to any peer
65000
192.168.2.1 from 0.0.0.0 (10.10.10.20) vrf RED(4) announce-nh-self
Origin incomplete, metric 0, localpref 50, valid, sourced, local, best (First path received)
Extended Community: RT:192.168.2.2:2
Originator: 10.10.10.20
Remote label: 2222
Last update: Tue Dec 20 13:01:20 2022
Displayed 4 routes and 4 total paths
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When the last IPv4 address of an interface is deleted, Linux removes all
routes includes BGP ones using this interface without any Netlink
advertisement. bgpd keeps them in RIB as valid (e.g. installed in FIB).
The previous patch invalidates the associated nexthop groups in zebra
but bgpd is not notified of the event.
> 2022/05/09 17:37:52.925 ZEBRA: [TQKA8-0276P] Not Notifying Owner: connected about prefix 29.0.0.0/24(40) 3 vrf: 7
Look for the bgp_path_info that are unsynchronized with the kernel and
flag them for refresh in their attributes. A VPN route leaking update is
calles and the refresh flag triggers a route refresh to zebra and then a
kernel FIB installation.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
At bgpd startup, VRF instances are sent from zebra before the
interfaces. When importing a l3vpn prefix from another local VRF
instance, the interfaces are not known yet. The prefix nexthop interface
cannot be set to the loopback or the VRF interface, which causes setting
invalid routes in zebra.
Update route leaking when the loopback or a VRF interface is received
from zebra.
At a VRF interface deletion, zebra voluntarily sends a
ZEBRA_INTERFACE_ADD message to move it to VRF_DEFAULT. Do not update if
such a message is received. VRF destruction will destroy all the related
routes without adding codes.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
If 'network import-check' is defined on the source BGP session, prefixes
that are stated in the network command cannot be leaked to the other
VRFs BGP table even if they are present in the origin VRF RIB if the
'rt import' statement is defined after the 'network <prefix>' ones.
When a prefix nexthop is updated, update the prefix route leaking. The
current state of nexthop validation is now stored in the attributes of
the bgp path info. Attributes are compared with the previous ones at
route leaking update so that a nexthop validation change now triggers
the update of destination VRF BGP table.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
If 'network import-check' is defined on the source BGP session, prefixes
that are stated in the network command cannot be leaked to the other
VRFs BGP table even if they are present in the origin VRF RIB.
Always validate the nexthop of BGP static routes (i.e. defined with the
network statement) if 'network import-check' is defined on the source
BGP session and the prefix is present in source RIB.
It fixes the issue when the 'rt import' statement is defined after the
'network' ones.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Prefixes that are stated in the network command cannot be leaked to
the other VRFs BGP table whether or not they are present in the origin
VRF RIB.
Always validate the nexthop of BGP static routes (i.e. defined with the
network statement) if 'no network import-check' is defined on the source
BGP session.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When we use vrf-to-vrf export, the nexthop has already not been
overridden when the peer is BGP unnumberred. However, when we use normal
export, the nexthop will be oberridden. This behavior will make the VPN
routes invalid in VPN RIB.
This PR stops overriding nexthop even if we use normal export.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
The first argument of sid_unregister should be default bgp instance.
However, these functions passed VRF bgp instance to this funciton.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
Currently bgpd uses the opaque codepoint (0xFFFF) in the BGP
advertisement. In this commit, we update bgpd to use the SRv6 codepoints
defined in the IANA SRv6 Endpoint Behaviors Registry
(https://www.iana.org/assignments/segment-routing/segment-routing.xhtml)
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
This commit changes some debug prints to use `%pI6` instead of
`inet_ntop` to print SRv6 SIDs.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
`srv6_locator_chunk_free()` takes care of freeing the memory allocated
for a `struct srv6_locator_chunk` and setting the
`struct srv6_locator_chunk` pointer to NULL.
It is not necessary to explicitly set the pointer to NULL after invoking
`srv6_locator_chunk_free()`.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
A programmer can use the `srv6_locator_chunk_free()` function to free
the memory allocated for a `struct srv6_locator_chunk`.
The programmer invokes `srv6_locator_chunk_free()` by passing a single
pointer to the `struct srv6_locator_chunk` to be freed.
`srv6_locator_chunk_free()` uses `XFREE()` to free the memory.
It is the responsibility of the programmer to set the
`struct srv6_locator_chunk` pointer to NULL after freeing memory with
`srv6_locator_chunk_free()`.
This commit modifies the `srv6_locator_chunk_free()` function to take a
double pointer instead of a single pointer. In this way, setting the
`struct srv6_locator_chunk` pointer to NULL is no longer the
programmer's responsibility but is the responsibility of
`srv6_locator_chunk_free()`. This prevents programmers from making
mistakes such as forgetting to set the pointer to NULL after invoking
`srv6_locator_chunk_free()`.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
The command `sid vpn per-vrf export (1-255)|auto` can be used to export
IPv4 and IPv6 routes from a VRF to the VPN RIB using a single SRv6 SID
(End.DT46 behavior).
This commit implements the no form of the above command, which can be
used to disable the export of the IPv4/IPv6 routes:
`no sid vpn per-vrf export`.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
In the current implementation of bgpd, SRv6 SIDs can be configured only
under the address-family. This enables bgpd to leak IPv6 routes using
an SRv6 End.DT6 behavior and IPv4 routes using an SRv6 End.DT4
behavior. It is not possible to leak both IPv6 and IPv4 routes using a
single SRv6 SID.
This commit adds a new CLI command
"sid vpn per-vrf export <sid_idx|auto>" that enables bgpd to leak both
IPv6 and IPv4 routes using a single SRv6 SID (End.DT46 behavior).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
In order to send correct SRv6 L3VPN advertisement, we need to save
srv6_locator_chunk in vpn_policy. With this information, we can
construct correct SRv6 L3VPN advertisement packets.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
When router id is changed through config, new RD is auto generated.
However new export RT was being assigned without freeing
the older RT from VRF.
Signed-off-by: Samanvitha B Bhargav <bsmanvitha@vmware.com>
RFC4364 describes peerings between multiple AS domains, to ease
the continuity of VPN services across multiple SPs. This commit
implements a sub-set of IETF option b) described in chapter 10 b.
The ASBR to ASBR approach is taken, with an EBGP peering between
the two routers. The EBGP peering must be directly connected to
the outgoing interface used. In those conditions, the next hop
is directly connected, and there is no need to have a transport
label to convey the VPN label. A new vty command is added on a
per interface basis:
This command if enabled, will permit to convey BGP VPN labels
without any transport labels (i.e. with implicit-null label).
restriction:
this command is used only for EBGP directly connected peerings.
Other use cases are not covered.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Let's convert to our actual library call instead
of using yet another abstraction that makes it fun
for people to switch daemons.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
