Add a hash_clean_and_free() function as well as convert
the code to use it. This function also takes a double
pointer to the hash to set it NULL. Also it cleanly
does nothing if the pointer is NULL( as a bunch of
code tested for ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Automated new scenarios to multicast pim6
SM test suite. Added 10 test cases to verify
multicast PIM6-SM functionality.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Co-Auther: Vijay Kumar Gupta <vijayg@vmware.com>
Enhanced or added new libraries to support
multicast pimv6 automation
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Co-Auther: Vijay Kumar Gupta <vijayg@vmware.com>
Add tests that configure and disable advertise-high-metrics with wide, narrow, and transition metric styles. Also test ip route behavior.
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
This test ensures that BGP VRF instance is able to import ECMP
paths, and is able to install 2 labelled routes accordingly.
The test also ensures that the imported 172.31.0.10/32 prefix
is selected and that the reason why the 172.31.0.10/32 prefix is
selected is not 'Locally configured route'. Actually, imported
routes do not figure out correctly the peer, and the reason is
falsely mentioned as local.
This test also uses IP ranges used for documentation and for
testing.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Depending on ip_route and kernel, the output might include a nhid
which causes the test to fail with a strict text output check.
Change to json output to avoid the issue
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Quite a few well-known communities from IANA's list do
not receive special treatment in Cisco IOS XR, and at least one
community on Cisco IOS XR's special treatment list, internet == 0:0,
is not formally a well-known community as it is not in [IANA-WKC] (it
is taken from the Reserved range [0x00000000-0x0000FFFF]).
https://datatracker.ietf.org/doc/html/rfc8642
This is Cisco-specific command which is causing lots of questions when it
comes to debugging and/or configuring it properly, but overall, this behavior
is very odd and it's not clear how it should be treated between different
vendor implementations.
Let's deprecate it and let the operators use 0:0/0 communities as they want.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
There were a few tests using "show bgp ... json detail" that did json
comparisons against a predefined json structure. This updates those
predefined json structures to match the new format of the output.
(new output moves path array under "paths" key and adds header keys)
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Implement: https://datatracker.ietf.org/doc/html/draft-abraitis-bgp-version-capability
Tested with GoBGP:
```
% ./gobgp neighbor 192.168.10.124
BGP neighbor is 192.168.10.124, remote AS 65001
BGP version 4, remote router ID 200.200.200.202
BGP state = ESTABLISHED, up for 00:01:49
BGP OutQ = 0, Flops = 0
Hold time is 3, keepalive interval is 1 seconds
Configured hold time is 90, keepalive interval is 30 seconds
Neighbor capabilities:
multiprotocol:
ipv4-unicast: advertised and received
ipv6-unicast: advertised
route-refresh: advertised and received
extended-nexthop: advertised
Local: nlri: ipv4-unicast, nexthop: ipv6
UnknownCapability(6): received
UnknownCapability(9): received
graceful-restart: advertised and received
Local: restart time 10 sec
ipv6-unicast
ipv4-unicast
Remote: restart time 120 sec, notification flag set
ipv4-unicast, forward flag set
4-octet-as: advertised and received
add-path: received
Remote:
ipv4-unicast: receive
enhanced-route-refresh: received
long-lived-graceful-restart: advertised and received
Local:
ipv6-unicast, restart time 10 sec
ipv4-unicast, restart time 20 sec
Remote:
ipv4-unicast, restart time 0 sec, forward flag set
fqdn: advertised and received
Local:
name: donatas-pc, domain:
Remote:
name: spine1-debian-11, domain:
software-version: advertised and received
Local:
GoBGP/3.10.0
Remote:
FRRouting/8.5-dev-MyOwnFRRVersion-gdc92f44a45-dirt
cisco-route-refresh: received
Message statistics:
```
FRR side:
```
root@spine1-debian-11:~# vtysh -c 'show bgp neighbor 192.168.10.17 json' | \
> jq '."192.168.10.17".neighborCapabilities.softwareVersion.receivedSoftwareVersion'
"GoBGP/3.10.0"
root@spine1-debian-11:~#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add a iproute2 API guard to the SVD test using `bridge fdb get`.
While it SHOULD be present on most systems based on their kernel
version it may not be present due to kernel/iproute2 version mismatch
weirdness.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add first of dvni topotests. Covers just basic usage of importing
wildcard VNI and installing it via lwt encap.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add new topo tests for validating mac learning, bridging and routing
with single vxlan device configuration
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
Have added topotest to verify below scenarios.
1. Verify OSPF Flood reduction functionality with ospf enabled on process level.
2. Verify OSPF Flood reduction functionality with ospf enabled on area level.
3. Verify OSPF Flood reduction functionality between different area's
Have sussessfully tested these in my local setup
Signed-off-by: nguggarigoud <nguggarigoud@vmware.com>
