it wants yang models installed which will only be there if frr has been
installed before, causing `make check` to fail when run on a system on
which frr has not been installed when GRPC is enabled (--enable-grpc)
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
RB-tree and double-linked-list easily support backwards iteration, and
an use case seems to have popped up. Let's make it accessible.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This just tries logging messages in random ways to allow the fuzzer to
do its thing and try to find weird edge cases.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Adding an `s` after these printfrr specifiers replaces 0.0.0.0 / :: in
the output with a star (`*`). This is primarily intended for use with
multicast, e.g. to print `(*,G)`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since this is only used in very few places, moving it out of the way is
reasonable. (`%pSG` will be pim_sgaddr)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
add a parameter to resolver api that is the vrf identifier. this permits
to make resolution self to each vrf. in case vrf netns backend is used,
this is very practical, since resolution can happen on one netns, while
it is not the case in an other one.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This can't really be run as part of CI, it's intended as a helper
instead, to use manually after poking around in the c-ares binding code.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
common_cli.c disables logging by default so stdio is usable as vty
without log messages getting strewn inbetween. This the right thing for
most tests, but not all; sometimes we do want log messages.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
*_anywhere(item) returns whether an item is on _any_ container. Only
available for unsorted containers for now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This provides a "is this item on this list" check, which may or may not
be faster than using *_find() for the same purpose. (If the container
has no faster way of doing it, it falls back to using *_find().)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Even if it doesn't matter for an unit test in general, it hides actual
leaks in the code being tested. Fix so any leaks will be actual bugs.
(Currently there aren't any, yay.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There's no more difference between number-named and word-named access-lists.
This commit removes separate arguments for number-named ACLs from CLI.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
FRR should only ever use the appropriate THREAD_ON/THREAD_OFF
semantics. This is espacially true for the functions we
end up calling the thread for.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
FRR should only ever use the appropriate THREAD_ON/THREAD_OFF
semantics. This is espacially true for the functions we
end up calling the thread for.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
frrmod_load() attempts to dlopen() several possible paths
(constructed from its basename argument) until one succeeds.
Each dlopen() attempt may fail for a different reason, and
the important one might not be the last one. Example:
dlopen(a/foo): file not found
dlopen(b/foo): symbol "bar" missing
dlopen(c/foo): file not found
Previous code reported only the most recent error. Now frrmod_load()
describes each dlopen() failure.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
This allows defining a CLI command like this:
`[no] some setting ![VALUE]`
with VALUE being optional for the "no" form, but required for the
positive form. It's just a `[...]` where the empty branch can only be
taken for commands starting with `no`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
frrscript_load now loads a function instead of a file, so frrscript_unload
should be renamed since it does not unload a function.
Signed-off-by: Donald Lee <dlqs@gmx.com>
Since the common CLI code calls nb_init, allow specifying some modules
to load by overriding test_yang_models.
Signed-off-by: David Lamparter <equinox@diac24.net>
Test uses staticd which required some C++ header protections.
Additionally, the test also runs in the ubuntu20 docker container as
grpc is supported there by the packaging system.
Signed-off-by: Christian Hopps <chopps@labn.net>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
The previous method, using zassert.h and hoping nothing includes
assert.h (which, on glibc at least, just does "#undef assert" and puts
its own definition in...) was fragile - and actually broke undetected.
Just provide our own assert.h and control overriding by putting it in a
separate directory to add to the include path (or not.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These are for string quoting (`%pSQ`) and string escaping (`%pSE`); the
sets / escape methods are currently rather "basic" and might be extended
in the future.
Signed-off-by: David Lamparter <equinox@diac24.net>
Analogous to Linux kernel `%pV` (but our mechanism expects 2 specifier
chars and `%pVA` is clearer anyway.)
Signed-off-by: David Lamparter <equinox@diac24.net>
... to suppress the warnings when using something that isn't quite ISO C
compatible and would otherwise cause compiler warnings from `-Wformat`.
Signed-off-by: David Lamparter <equinox@diac24.net>
This replaces `%n` with a safe, out-of-band option that simply records
the start and end offset of the output produced for each `%...`
specifier.
The old `%n` code is removed.
Signed-off-by: David Lamparter <equinox@diac24.net>
Allowing printfrr extensions to directly write to the output buffer has
a few advantages:
- there is no arbitrary length limit imposed (previously 64)
- the output doesn't need to be copied another time
- the extension can directly use bprintfrr() to put together pieces
The downside is that the theoretical length (regardless of available
buffer space) must be computed correctly.
Extended unit tests to test these paths a bit more thoroughly.
Signed-off-by: David Lamparter <equinox@diac24.net>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Create appropriate accessor functions for the rn->lock
data. We should be accessing this data through accessor
functions since it is private data to the data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The Solaris code has gone through a deprecation cycle. No-one
has said anything to us and worse of all we don't have any test
systems running Solaris to know if we are making changes that
are breaking on Solaris. Remove it from the system so
we can clean up a bit.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In case of config rollback is enabled,
record northbound transaction based on a control flag.
The actual frr daemons would set the flag to true via
nb_init from frr_init.
This will allow test daemon to bypass recording
transacation to db.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Based on work originally by Mark Stapp <mjs@voltanet.io>.
Make it possible to iterate the typesafe lists in a const
context, as well as find items from them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
[above signoff was for the original version before modification]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Having a fixed set of parameters for each northbound callback isn't a
good idea since it makes it difficult to add new parameters whenever
that becomes necessary, as several hundreds or thousands of existing
callbacks need to be updated accordingly.
To remediate this issue, this commit changes the signature of all
northbound callbacks to have a single parameter: a pointer to a
'nb_cb_x_args' structure (where x is different for each type
of callback). These structures encapsulate all real parameters
(both input and output) the callbacks need to have access to. And
adding a new parameter to a given callback is as simple as adding
a new field to the corresponding 'nb_cb_x_args' structure, without
needing to update any instance of that callback in any daemon.
This commit includes a .cocci semantic patch that can be used to
update old code to the new format automatically.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Replace all `random()` calls with a function called `frr_weak_random()`
and make it clear that it is only supposed to be used for weak random
applications.
Use the annotation described by the Coverity Scan documentation to
ignore `random()` call warnings.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
Our two northbound tools don't have embedded YANG modules like the
other FRR binaries. As such, ly_ctx_set_module_imp_clb() shouldn't be
called when the YANG subsystem it being initialized by a northbound
tool. To make that possible, add a new "embedded_modules" parameter
to the yang_init() function to control whether libyang should look
for embedded modules or not.
With this fix, "gen_northbound_callbacks" and "gen_yang_deviations"
won't emit "YANG model X not embedded, trying external file"
warnings anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
Just a small hack to use printfrr() in tests, since otherwise the
redefined PRId64 trips some warnings.
Signed-off-by: David Lamparter <equinox@diac24.net>
