Currently, staticd configuration is tightly coupled with VRF existence.
Because of that, it has to use a hack in NB infrastructure to create a
VRF configuration when at least one static route is configured for this
VRF. This hack is incompatible with mgmtd, because mgmtd doesn't execute
configuration callbacks. Because of that, the configuration may become
out of sync between mgmtd and staticd. There are two main cases:
1. Create static route in a VRF. The VRF data node will be created
automatically in staticd by the NB hack, but not in mgmtd.
2. Delete VRF which has some static routes configured. The static route
configuration will be deleted from staticd by the NB hack, but not
from mgmtd.
To fix the problem, decouple configuration of static routes from VRF
configuration. Now it is possible to configure static routes even if the
VRF doesn't exist yet. Once the VRF is created, staticd applies all the
preconfigured routes.
This change also fixes the problem with static routes being preserved in
the system when staticd "control-plane-protocol" container is deleted
but the VRF is still configured.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
In the master branch a new MTYPE_SCRIPT_RES was created for
frrscript_get_results, lua_to decoders should use that
Signed-off-by: Donald Lee <dlqs@gmx.com>
These enum's have been around since 2005 and FRR
still does not have any users of these particular
values. After almost 20 years, let's simplify the
code slightly and remove them.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Include an event ptr-to-ptr in the event_execute() api
call, like the various schedule api calls. This allows the
execute() api to cancel an existing scheduled task if that
task is being executed inline.
Signed-off-by: Mark Stapp <mjs@labn.net>
GCC/clang warns about using strncpy in such a way that it does not copy
the null byte of a string; as implemented it was fine, but to fix the
warning, just use strlcat which was purpose made for the task being
accomplished here.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
The runtime path for grpc.so has been changed for test_grpc.cpp
and also there were couple of definitions which are duplicate,
hence renamed them.
Signed-off-by: Rajesh Gangam <rajeshgangam@gmail.com>
Move away from things like "lock if not locked" type code, require the
user has locked prior to geting to that point.
For now we warn if we are taking a lock we already had; however, this
should really be a failure point.
New requirements:
SETCFG -
not implicit commit - requires user has locked candidate DS and they
must unlock after
implicit commit - requires user has locked candidate and running DS
both locks will be unlocked on reply to the SETCFG
COMMITCFG -
requires user has locked candidate and running DS and they must unlock
after
rollback - this code now get both locks and then does an unlock and
early return thing on the adapter side. It needs to be un-special
cased in follow up work that would also include tests for this
functionality.
Signed-off-by: Christian Hopps <chopps@labn.net>
test_frrscript is run from the `tests` directory and expects the sample
lua script `script1.lua` to be present in the `lib` directory. When the
package is built out of tree (which always happens when a debian
package is built), and scripting is enabled, test fails because the lua
file is not present in the `tests/lib/` subdir of the _build_ directory.
Fix this by adding `script1.lua` as an extra dependency for
`test_frrscript`, and a recipe that copies the file from the source tree
to the build tree (note: it needs to be marked ".PHONY" because
otherwise `make` thinks that it already exists, in the source tree).
After this commit, the following command starts to work:
dpkg-buildpackage --build-profiles=pkg.frr.lua -b -uc
Signed-off-by: Eugene Crosser <crosser@average.org>
The typesafe hash _member() didn't check tabshift/count before
proceeding to look at the hash table, leading it to dereference a NULL
pointer when the hash table is in fact empty.
Test case added to tests/lib/test_typelist.
Note this function is not currently used anywhere. Only lib/cspf.c uses
_member(), but it does so on a RB-tree rather than a hash.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a hash_clean_and_free() function as well as convert
the code to use it. This function also takes a double
pointer to the hash to set it NULL. Also it cleanly
does nothing if the pointer is NULL( as a bunch of
code tested for ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Each BGP prefix may have an as-path list attached. A forged
string is stored in the BGP attribute and shows the as-path
list output.
Before this commit, the as-path list output was expressed as
a list of AS values in plain format. Now, if a given BGP instance
uses a specific asnotation, then the output is changed:
new output:
router bgp 1.1 asnotation dot
!
address-family ipv4 unicast
network 10.200.0.0/24 route-map rmap
network 10.201.0.0/24 route-map rmap
redistribute connected route-map rmap
exit-address-family
exit
!
route-map rmap permit 1
set as-path prepend 1.1 5433.55 264564564
exit
ubuntu2004# do show bgp ipv4
BGP table version is 2, local router ID is 10.0.2.15, vrf id 0
Default local pref 100, local AS 1.1
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 4.4.4.4/32 0.0.0.0 0 32768 1.1 5433.55 4036.61268 ?
*> 10.0.2.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 ?
10.200.0.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 i
10.201.0.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 i
The changes include:
- the aspath structure has a new field: asnotation type
The ashash list will differentiate 2 aspaths using a different
asnotation.
- 3 new printf extensions display the as number in the wished
format: pASP, pASD, pASE for plain, dot, or dot+ format (extended).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The files converted in this commit either had some random misspelling or
formatting weirdness that made them escape automated replacement, or
have a particularly "weird" licensing setup (e.g. dual-licensed.)
This also marks a bunch of "public domain" files as SPDX License "NONE".
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When running the build in a separate build directory, redirecting output
into a file can error out if the directory does not exist yet. Some
places already had `mkdir -p` calls, but not all.
Make all occurences of this consistently use `@$(MKDIR_P)`.
(Extension of PR #12575 to catch more places.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The wq->spec.errorfunc is never used in the code.
It's been in the code base since 2005 and I also
do not remember ever seeing it being called. No
workqueue process function ever returns error.
Since it's not used let's just remove it from the
code base.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The issue fixed in the previous commit now correctly triggers a failure:
("assertion (list_add(&head, &itm[j]) == &itm[j]) failed")
Turns out the "shitty" hash function was not shitty enough.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
