To ensure this, add a const modifier to functions' arguments. Would be
great do this initially and avoid this large code change, but better
late than never.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There's no more difference between number-named and word-named access-lists.
This commit removes separate arguments for number-named ACLs from CLI.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
1) Do not explicitly set the thread pointer to NULL.
FRR should only ever use the appropriate THREAD_ON/THREAD_OFF
semantics. This is espacially true for the functions we
end up calling the thread for.
2) Fix mixup of `struct eigrp_interface` and `struct eigrp`
usage of the same thread pointer.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
vrf_name_to_id() returned VRF_DEFAULT when the vrf name was
unknown, hiding errors. Per community recommendation, vrf_name_to_id()
is now removed and the few callers now use vrf_lookup_by_name()
directly.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The only difference in daemons' interface node definition is the config
write function. No need to define the node in every daemon, just pass
the callback as an argument to a library function and define the node
there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There are a few places in the code where we use PREFIX_COPY(_IPV4/IPV6)
macro to copy a prefix. Let's always use prefix_copy function for this.
This should fix CID 1482142 and 1504610.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
If we have the following configuration:
```
vrf red
smth
exit-vrf
!
interface red vrf red
smth
```
And we delete the VRF using "no vrf red" command, we end up with:
```
interface red
smth
```
Interface config is preserved but moved to the default VRF.
This is not an expected behavior. We should remove the interface config
when the VRF is deleted.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The backoff code assumed that yang operations always completed quickly.
It checked for > 100 YANG modeled commands happening in under 1 second
to enable batching. If 100 yang modeled commands always take longer than
1 second batching is never enabled. This is the exact opposite of what
we want to happen since batching speeds the operations up.
Here are the results for libyang2 code without and with batching.
| action | 1K rts | 2K rts | 1K rts | 2K rts | 20k rts |
| | nobatch | nobatch | batch | batch | batch |
| Add IPv4 | .881 | 1.28 | .703 | 1.04 | 8.16 |
| Add Same IPv4 | 28.7 | 113 | .590 | .860 | 6.09 |
| Rem 1/2 IPv4 | .376 | .442 | .379 | .435 | 1.44 |
| Add Same IPv4 | 28.7 | 113 | .576 | .841 | 6.02 |
| Rem All IPv4 | 17.4 | 71.8 | .559 | .813 | 5.57 |
(IPv6 numbers are basically the same as iPv4, a couple percent slower)
Clearly we need this. Please note the growth (1K to 2K) w/o batching is
non-linear and 100 times slower than batched.
Notes on code: The use of the new `nb_cli_apply_changes_clear_pending`
is to commit any pending changes (including the current one). This is
done when the code would not correctly handle a single diff that
included the current changes with possible following changes. For
example, a "no" command followed by a new value to replace it would be
merged into a change, and the code would not deal well with that. A good
example of this is BGP neighbor peer-group changing. The other use is
after entering a router level (e.g., "router bgp") where the follow-on
command handlers expect that router object to now exists. The code
eventually needs to be cleaned up to not fail in these cases, but that
is for future NB cleanup.
Signed-off-by: Christian Hopps <chopps@labn.net>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
Check that incoming TLVS a) don't overrun the incoming packet,
b) don't underrun the required size for the type of TLV.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
`config.h` has all the defines from autoconf, which may include things
that switch behavior of other included headers (e.g. _GNU_SOURCE
enabling prototypes for additional functions.)
So, the first include in any `.c` file must be either `config.h` (with
the appropriate guard) or `zebra.h` (which includes `config.h` first
thing.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Most of these are many, many years out of date. All of them vary
randomly in quality. They show up by default in packages where they
aren't really useful now that we use integrated config. Remove them.
The useful ones have been moved to the docs.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Same as previous commit -- convert most DEFINE_MTYPE into the _STATIC
variant, and move the remaining non-static ones to appropriate places.
Signed-off-by: David Lamparter <equinox@diac24.net>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
This version of eigrp pre-calculated the eigrp metric
to be a default of 1500 bytes, but unfortunately it
had entered the byte order wrong.
Modify the code to properly set the byte order
according to the eigrp rfc as well as actually
read in and transmit the mtu of the interface
instead of hard coding it to 1500 bytes.
Fixes: #7986
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
valgrind is finding:
2141982-==2141982== Conditional jump or move depends on uninitialised value(s)
2141982:==2141982== at 0x11A7A6: eigrp_metrics_is_same (eigrp_metric.c:134)
2141982-==2141982== by 0x120360: eigrp_topology_update_distance (eigrp_topology.c:374)
2141982-==2141982== by 0x124F01: eigrp_get_fsm_event (eigrp_fsm.c:284)
2141982-==2141982== by 0x12519E: eigrp_fsm_event (eigrp_fsm.c:419)
2141982-==2141982== by 0x1206A1: eigrp_topology_neighbor_down (eigrp_topology.c:518)
2141982-==2141982== by 0x11AB3A: eigrp_nbr_delete (eigrp_neighbor.c:178)
2141982-==2141982== by 0x124494: eigrp_finish_final (eigrpd.c:271)
2141982-==2141982== by 0x1245A8: eigrp_finish (eigrpd.c:247)
2141982-==2141982== by 0x124630: eigrp_terminate (eigrpd.c:240)
2141982-==2141982== by 0x11344B: sigint (eigrp_main.c:112)
2141982-==2141982== by 0x48F5F32: quagga_sigevent_process (sigevent.c:130)
Prevent this from happening.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add these file and introduce some new fundamental types
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Donnie Savage <diivious@hotmail.com>
Rename struct eigrp_nexthop_entry to struct eigrp_route_descriptor
Rename struct eigrp_prefix_entry to struct eigrp_prefix_descriptor
Fix all the associated function names as well.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Donnie SAvage <diivious@hotmail.com>
Move the prototypes for eigrp_yang that are in eigrpd.h
into eigrp_yang.h.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Donnie Savage <diivious@hotmail.com>
Move the forward declarations for eigrp_cli.c from eigrpd.h
into eigrp_cli.h.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Donnie Savage <diivious@hotmail.com>
The `struct eigrp_master` data structure belongs in the
eigrpd.h file. Move it over, in addition start forward
thinking about the different TLV versions so we can
track them better in the future.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Donnie Savage <diivious@hotmail.com>
Issue:
The bgp routes learnt from peers which are not installed in kernel are
advertised to peers. This can cause routers to send traffic to these
destinations only to get dropped. The fix is to provide a configurable
option "bgp suppress-fib-pending". When the option is enabled, bgp will
advertise routes only if it these are successfully installed in kernel.
Fix (Part1) :
* Added message ZEBRA_ROUTE_NOTIFY_REQUEST used by client to request
FIB install status for routes
* Added AFI/SAFI to ZAPI messages
* Modified the functions zapi_route_notify_decode(), zsend_route_notify_owner()
and route_notify_internal() to include AFI, SAFI as parameters
Signed-off-by: kssoman <somanks@gmail.com>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Currently eigrp has a bunch of commands that are not fully
implemented yet. Tone down the yang code change of making
these in your face errors to zlog_warns, so the end-user
can not be freaked out by the message.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We have this pattern in the code base:
if (thread)
THREAD_OFF(thread);
If we look at THREAD_OFF we check to see if thread
is non-null too. So we have a double check.
This is unnecessary. Convert to just using THREAD_OFF
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
DEFPY_YANG will allow the CLI to identify which commands are
YANG-modeled or not before executing them. This is going to be
useful for the upcoming configuration back-off timer work that
needs to commit pending configuration changes before executing a
command that isn't YANG-modeled.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
These are easy to get subtly wrong, and doing so can cause
nondeterministic failures when racing in parallel builds.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Having a fixed set of parameters for each northbound callback isn't a
good idea since it makes it difficult to add new parameters whenever
that becomes necessary, as several hundreds or thousands of existing
callbacks need to be updated accordingly.
To remediate this issue, this commit changes the signature of all
northbound callbacks to have a single parameter: a pointer to a
'nb_cb_x_args' structure (where x is different for each type
of callback). These structures encapsulate all real parameters
(both input and output) the callbacks need to have access to. And
adding a new parameter to a given callback is as simple as adding
a new field to the corresponding 'nb_cb_x_args' structure, without
needing to update any instance of that callback in any daemon.
This commit includes a .cocci semantic patch that can be used to
update old code to the new format automatically.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
The vrrpd one conflicts with the standalone vrrpd package; also we're
installing daemons to /usr/lib/frr on some systems so they're not on
PATH.
Signed-off-by: David Lamparter <equinox@diac24.net>
Commit: ddbf3e6060
This commit modified the interface up handling code in
ZAPI such that the zclient handled the decoding for you.
Prior to this commit ospf assumed that it could use the
old ifp pointer to know state before reading the stream.
This lead to a situation where ospf would `smartly` track
and do the right thing in this situation. This commit
changed this assumption and in certain scenarios, say
a interface was changed after it was already up would
lead to situations where ospf would not properly handle
the new interface up.
Modify ospf to track data that is important to it in
it's interface->info pointer.
This code pattern was followed in both eigrp and pim.
In eigrp's case it was just behaving weirdly in any event
so fixing this pattern is not a big deal. In pim's
case it was not properly using this so it's a no-op
to fix.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This function was excessively complicated. Simplify and
make everyone use the same access macro.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use a local variable to avoid trying to take the address
of a packed struct member - an address from the ip header
in these cases.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
User pass the string match large-community 1 exact-match from CLI.
Now route map lib has got the string as "1 exact-match". It passes the string
to call back for compilation. BGP will parse this string and came to know
that for "1" it has to do exact match. Routemap lib has to save "1" in it’s
dependency table. Here routemap is saving this as a “1 exact-match”
which is wrong. The solution is used the compiled data.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
We assign a value to the eigrp data structure and then
immediately overwrite it in the for loop. No need to
do a eigrp_lookup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
