Add a default limit to the InQ for messages off the bgp peer
socket. Make the limit configurable via cli.
Adding in this limit causes the messages to be retained in the tcp
socket and allow for tcp back pressure and congestion control to kick
in.
Before this change, we allow the InQ to grow indefinitely just taking
messages off the socket and adding them to the fifo queue, never letting
the kernel know we need to slow down. We were seeing under high loads of
messages and large perf-heavy routemaps (regex matching) this queue
would cause a memory spike and BGP would get OOM killed. Modifying this
leaves the messages in the socket and distributes that load where it
should be in the socket buffers on both send/recv while we handle the
mesages.
Also, changes were made to allow the ringbuffer to hold messages and
continue to be filled by the IO pthread while we wait for the Main
pthread to handle the work on the InQ.
Memory spike seen with large numbers of routes flapping and route-maps
with dozens of regex matching:
```
Memory statistics for bgpd:
System allocator statistics:
Total heap allocated: > 2GB
Holding block headers: 516 KiB
Used small blocks: 0 bytes
Used ordinary blocks: 160 MiB
Free small blocks: 3680 bytes
Free ordinary blocks: > 2GB
Ordinary blocks: 121244
Small blocks: 83
Holding blocks: 1
```
With most of it being held by the inQ (seen from the stream datastructure info here):
```
Type : Current# Size Total Max# MaxBytes
...
...
Stream : 115543 variable 26963208 15970740 3571708768
```
With this change that memory is capped and load is left in the sockets:
RECV Side:
```
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
ESTAB 265350 0 [fe80::4080:30ff:feb0:cee3]%veth1:36950 [fe80::4c14:9cff:fe1d:5bfd]:179 users:(("bgpd",pid=1393334,fd=26))
skmem:(r403688,rb425984,t0,tb425984,f1816,w0,o0,bl0,d61)
```
SEND Side:
```
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
ESTAB 0 1275012 [fe80::4c14:9cff:fe1d:5bfd]%veth1:179 [fe80::4080:30ff:feb0:cee3]:36950 users:(("bgpd",pid=1393443,fd=27))
skmem:(r0,rb131072,t0,tb1453568,f1916,w1300612,o0,bl0,d0)
```
Signed-off-by: Stephen Worley <sworley@nvidia.com>
We might disable sending unconfig/shutdown notifications when
Graceful-Restart is enabled and negotiated.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
As an example, Arista EOS allows this behavior.
Configuration something like:
```
neighbor PG peer-group
neighbor PG remote-as 65001
neighbor PG local-as 65001
neighbor 192.168.10.124 peer-group PG
```
Or without peer-group.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
We are allocating temporary memory for information about
what to process in this thread, which is not being cleaned
up on thread cancelling.
Signed-off-by: Samanvitha B Bhargav <bsmanvitha@vmware.com>
Memory allocated when 'import vrf route maps <>' is configured,
wasn't being freed when the entire bgp config
was deleted through 'no router bgp'.
Signed-off-by: Samanvitha B Bhargav <bsmanvitha@vmware.com>
==1179738== 48 (40 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 13 of 29
==1179738== at 0x483AB65: calloc (vg_replace_malloc.c:760)
==1179738== by 0x493C8D5: qcalloc (memory.c:116)
==1179738== by 0x208F0C: ecommunity_dup (bgp_ecommunity.c:267)
==1179738== by 0x2B300C: conf_copy (bgp_updgrp.c:170)
==1179738== by 0x2B35BF: peer2_updgrp_copy (bgp_updgrp.c:277)
==1179738== by 0x2B5189: update_group_find (bgp_updgrp.c:826)
==1179738== by 0x2B70D0: update_group_adjust_peer (bgp_updgrp.c:1769)
==1179738== by 0x23DB7D: update_group_adjust_peer_afs (bgp_updgrp.h:519)
==1179738== by 0x243B21: bgp_establish (bgp_fsm.c:2129)
==1179738== by 0x244B94: bgp_event_update (bgp_fsm.c:2597)
==1179738== by 0x26B0E6: bgp_process_packet (bgp_packet.c:2895)
==1179738== by 0x498F5FD: thread_call (thread.c:2008)
==1179738== by 0x49253DA: frr_run (libfrr.c:1198)
==1179738== by 0x1EEC38: main (bgp_main.c:520)
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
TCP keepalive is enabled once BGP connection is established.
New vty commands:
bgp tcp-keepalive <1-65535> <1-65535> <1-30>
no bgp tcp-keepalive
Signed-off-by: Xiaofeng Liu <xiaofeng.liu@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Let's convert to our actual library call instead
of using yet another abstraction that makes it fun
for people to switch daemons.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP SoO is a tag that is appended on BGP updates to allow a peer to mark
a particular peer as belonging to a particular site. In certain MPLS L3 VPN
configurations, the BGP AS-Path may not provide the granularity needed
prevent a loop in the control-plane. With this in mind, BGP SoO is designed
to fill this gap and prevent a routing loop that may occur.
If we configure for example, `neighbor soo 65000:1` at PEs, routes won't be
announced between CPEs if soo matches. This is especially needed when using
as-override or allowas-in.
Also, this is the automated way of the same behavior as configuring route-maps
for each peer like:
```
bgp extcommunity-list cpe permit soo 65000:1
!
route-map cpe permit 10
set extcommunity soo 65000:1
...
route-map cpe deny 10
match extcommunity cpe
route-map cpe permit 20
...
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Handle ORF REMOVE_ALL events as well, because now we just silently return, and
a stale dynamic prefix-list is used instead of the new one.
Before this, soft clear/route refresh was needed. Don't know the reason, but
we didn't send updates when modifying the filters.
Probably due to a massive change of filters and to avoid automatic updates :/
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Let's just use THREAD_OFF consistently in the code base
instead of each daemon having a special macro that needs to
be looked at and remembered what it does.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
A new command is available under SAFI_MPLS_VPN:
With this command, the BGP vpnvx prefixes received are
not kept, if there are no VRF interested in importing
those vpn entries.
A soft refresh is performed if there is a change of
configuration: retain cmd, vrf import settings, or
route-map change.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Description:
- On removing just the route-map from the default-originate config,
update message is not sent to the peer,
and the properties set by route-map persists on peer's end,
until we do a clear bgp.
Fix:
- The flag which is set when default route is originated,
should be unset once "neighbor X.X.X.X default-orginate",
to remove route-map from "neighbor X.X.X.X default-orginate route-map Y",
so as to trigger the flow for sending an update.
Co-authored-by: Abhinay Ramesh <rabhinay@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
These values were named WITHDRAW and UPDATE. Yeah, you guessed it, those
are already #define's elsewhere (bgp_debug.h). Hilarity ensues.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Just adding a support for peer-groups, because now it's not possible to
configure BGP role for peer-groups.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The command `debug bgp allow-martian` is not actually
a debug command it's a command that when entered allows
bgp to not reset a peering when a martian nexthop is
passed in the nlri.
Add the `bgp allow-martian-nexthop` command and allow it to be
used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
bgp_rpki_validation2str implements a switch statement to determine the
correct string response from the validation state. So, switch to a
switch statement when getting a name by role for code consistency.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
Roles cannot be applied to iBGP sessions, so we can move this check to
the top of the role configuration method. Thus, we simplify the internal
logic of branching.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
BGP Role is currently defined only for eBGP session. So, we don't
need to consider which roles can be applied on iBGP session and
thus simplify code fragment.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
Allow BGP to control the TOS DSCP value in the tcp header
via a new command at the bgp global level `bgp session-dscp <0-63>`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Pavel Shirhov <pavelsh@microsoft.com>
The `bgp no-rib` command cycles through all the bgp rib tables
and removes them from zebra. Modify the code so that FRR notices
that it is attempting to cycle through the safi's that are two level
tables. In addition these safi's cannot just blindly remove the routes
from the rib as that there are none explicitly.
This code just prevents the crash in bgpd. It does not properly cycle
through and remove the zebra changes made that are explicit to these afi's.
This should be handled as appropriate by the developers on these safi's when
it becomes important to them.
Fixes: #11178
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Peer groups when various forms of `bgp capability extended-nexthop`
is entered on them are toggling the nexthop tracking status of peers
in their peer group. This is ok when the peer is not interface based.
But it is not ok when the peer is interface based as that it will turn
off the ability of FRR to properly work with that peer type.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Also, add N-Bit (Notification) flag for Graceful Restart.
This is a preparation for RFC8538.
More information: https://datatracker.ietf.org/doc/html/rfc8538
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When the peer is configured for the first time:
```
neighbor P1 peer-group
neighbor P1 remote-as external
neighbor P1 advertise-map ADV exist-map EXIST
neighbor 10.10.10.1 peer-group P1
```
Conditional advertisements route-maps are not updated and cond. advertisements
do not work until FRR restarted. BGP sessions clear does not help.
Or even changing peer-group for a peer, causes this bug to kick in.
```
no neighbor 10.10.10.1
neighbor 10.10.10.1 peer-group P2
```
With this fix, cond. advertisements start working immediatelly.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Delay BGP configuration until we receive end-configuration hook to make sure
we don't send partial updates to peer which leads to broken Graceful-Restart.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
If you enter:
router bgp 325
bgp graceful-restart
bgp graceful-restart
!
The second command entered will fail. This is not
something that should be failing as that it's a no-op.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
confederations are checking to see that the bgp pointer
is non-null. But it's impossible to have a null pointer
in the cli and in all paths we have already deref'ed the bgp
pointer. Let's remove that error code as that it is impossible
to happen.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a 15 minute warning to the logging system when
bgp policy is not setup properly. Operators keep asking
about the missing policy( on upgrade typically ). Let's
try to give them a bit more of a hint when something is
going wrong as that they are clearly missing the other
various places FRR tells them about it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When setting maximum-prefix-out on peer-group, the applied value on
member is 0.
Fix usage of maximum-prefix-out on peer-group.
The peer_maximum_prefix_out_(un)set functions are derived from
peer_maximum_prefix_(un)set.
Fixes: fde246e835 ("bgpd: Add an option to limit outgoing prefixes")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Opaque data takes up a lot of memory when there are a lot of routes on
the box. Given that this is just a cosmetic info, I propose to disable
it by default to not shock people who start using FRR for the first time
or upgrades from an old version.
Fixes#10101.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Abstract:
- The command "neighbor PEER maximum-prefix-out NUMBER" cannot be applied
without clearing the BGP neighbor.
- Apply the maximum-prefix-out value as soon as it is modified without
clearing the neighbor.
subgroup_update_packet() and subgroup_withdraw_packet() respectively
manages the announcement and withdrawal BGP message to the peer.
subgrp->scount counter counts the number of sent prefixes.
Before the patch, the maximum out prefix limitation was applied in
subgroup_update_packet() in order that subgrp->scount never exceeds the
limit. Setting a limit inferior to the effective number of sent prefix
did not result in sending any withdrawal message to reduce the number of
sent prefixes. Without clearing the BGP neighbor, the limitation only
applied to the announcement of new prefixes when the limitation was
over.
With the patch, the limitation is checked in subgroup_announce_check().
The function is intended to say whether a prefix has to be announced in
regards to the prefix-list, route-map... Now when a maximum-prefix-out
value is changed/removed, the neighbor AFI/SAFI table is re-parsed in
the same way as for the application of route-map, prefix-lists...
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Used for graceful-restart mostly.
Especially for bgp_show_neighbor_graceful_restart_capability_per_afi_safi()
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Extended BGP Administrative Shutdown Communication (rfc9003):
Basically, shutdown message size is increased to 255 from 128.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Update BFD sessions when the update-source configuration is set so the
session follows the new configured source address.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When altering the TTL of a eBGP peer also update the BFD
configuration. This was only working when the configuration happened
after the peer connection had been established.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When removing the command `no neighbor <X> ebgp-multihop <Y>`
the bgp code was always resetting the connection even if
the command would do nothing.
Fixes: #6464
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Any command that uses `peer_lookup_in_view` crashes when "vrf all" is
used, because bgp is NULL in this case.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When a regular access-list is updated, we should update references to
regular access-lists, not as-path access-lists.
Fixes#9707.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The idea is to disable addpath-rx capability to avoid unnecessary additional
routes installed.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
When FRR added the -Z parameter the bgp daemon was setting
a vrf identifier based upon a number starting at 1. This
caused issues when we upgraded the code to the outgoing
sockets to use vrf_bind always.
FRR should never just randomly select a vrf identifier.
Let's just use VRF_DEFAULT when we are in a -Z environment.
It's a safe bet.
Fixes: #9519
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is to avoid breaking changes between existing deployments of
extended community for bandwidth encoding. By default FRR uses uint32
to encode bandwidth, which is not as the draft requires (IEEE floating-point).
This switch enables the required encoding per-peer.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
When BGP is notified by RIB that peer address is unreachable then BGP session must be brought
down immediately and not wait for the hold-timer expiry. Today single-hop EBGP already behaves
this way but need to change for iBGP and multi-hop EBGP sessions.
Signed-off-by: Prerana G.B <prerana@vmware.com>, Pushpasis Sarkar <spushpasis@vmware.com>
Currently, the following sequence of events between peers could
result in erroneous capability reports on the peer
with enabled dont-capability-negotiate option:
- having some of the capabilities advertised to a bgp neighbor,
- then disabling capability negotiation to that neighbor,
- then resetting connection to it,
- and no capabilities are actually sent to the neighbor,
- but "show bgp neighbors" on the host still displays them
as advertised to the neighbor.
There are two possibilities for establishing a new connection
- the established connection was initiated by us with bgp_start(),
- the connection was initiated on the neighbor side and processed by
us via bgp_accept() in bgp_network.c.
The former case results in "show bgp neighbors" displaying only
"received" in capabilities, as the peer's cap is initiated to zero
in bgp_start().
In the latter case, if bgp_accept() happens before bgp_start()
is called, then new peer capabilities are being transferred
from its previous record before being zeroed in bgp_start().
This results in "show bgp neighbors" still displaying
"advertised and received" in capabilities.
Following the logic of a similar af_cap field clearing,
treated correctly in both cases, we
- reset peer's capability during bgp_stop()
- don't pass it over to a new peer structure in bgp_accept().
This fix prevents transferring of the previous capabilities record
to a new peer instance in arbitrary reconnect scenario.
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
Adds a knob that sets the time between loc-rib scans for conditional
advertisement.
I chose the range (5-240) because 1 second seems dumb and too easy to
hurt yourself at even moderate scale, 5 seconds you can still hurt
yourself but I could see a use case for it, and 4 minutes should be
enough for anyone (tm)
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
the realloc man page:
If ptr is NULL, then the call is equivalent to malloc(size)
This should be sufficient for our needs to not have to have
XMALLOC and XREALLOC
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There is no peer_af allocated in `peer_activate`. Trying to delete
the structure just results in an no-op and a error return value.
The error message "couldn't delete af structure for peer" is
unexpected.
Signed-off-by: zyxwvu Shi <shiyuchen.syc@bytedance.com>
New peers should be initialized with a usual max packet size and later
determined on OPEN messages.
Testing with different peers supporting/not supporting extended support.
2021/07/02 13:48:00 BGP: [WEV7K-2GAQ5] u2:s2 send UPDATE len 8991 (max message len: 65535) numpfx 1788
2021/07/02 13:48:03 BGP: [WEV7K-2GAQ5] u3:s3 send UPDATE len 4096 (max message len: 4096) numpfx 809
2021/07/02 13:48:03 BGP: [WEV7K-2GAQ5] u3:s3 send UPDATE len 4096 (max message len: 4096) numpfx 809
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
There are a few places in the code where we use PREFIX_COPY(_IPV4/IPV6)
macro to copy a prefix. Let's always use prefix_copy function for this.
This should fix CID 1482142 and 1504610.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Adds new commands to allow a user to default 'default' address-families
to be inherited by all new peers. Previously this was limited to just
ipv4/ipv6 unicast, now the full list is:
---
ipv4-unicast
ipv4-multicast
ipv4-vpn
ipv4-labeled-unicast
ipv4-flowspec
ipv6-unicast
ipv6-multicast
ipv6-vpn
ipv6-labeled-unicast
ipv6-flowspec
l2vpn-evpn
---
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Introduces bgp->default_af to selectively enable various default
afi/safis to be inherited by new peers.
Makes default_af flag logic consistent for all address-families, i.e.
instead of a "no default" flag for ipv4 and a "default" flag for ipv6,
just use "default" for both and make it true for ipv4 by default.
Removes old BGP_FLAG_NO_DEFAULT_IPV4 and BGP_FLAG_DEFAULT_IPV6, and
cleans up bgp->flags bit definitions to avoid gaps for unused bits.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Display on which VRF/view the neighbor was not found. Useful when
selecting "vrf all".
Before patch:
No such neighbor in this view/vrf
After patch:
No such neighbor in VRF default
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
We are inconsistently using peer_establiahed(peer) with
sometimes using `peer->status == Established`. Just Convert
over to using the function for consistency.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP configuration changes that imply recomputing the BGP route table
(e.g. modifying route-maps, setting bgp graceful-shutdown) might be a
long time process depending on the size of the BGP table and the
route-map numbers and complexity. For example, setups with full
Internet routes take something like one minute to reprocess all the
prefixes when graceful-shutdown is configured. During this time, a
"show bgp commands" request on vtysh results in blocking the shell until
the soft reconfigure table task is over.
This patch splits bgp_soft_reconfig_table task into thread jobs of 25K
prefixes.
Some tests on a full Internet route setup show that after reconfiguring
route-maps or graceful-shutdown, vtysh is not stucked anymore. We are
now able to request commands like "show bgp summary" after 1 or 2
seconds instead of 30 to 60s.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
This commit add base-lines for BGP SRv6 VPN support.
srv6_locator_chunks property of struct bgp is used
to store BGPd's own SRv6 locator chunk getting with
ZEBRA_SRV6_MANAGER_GET_LOCATOR_CHUNK api.
And srv6_functions is used to store BGP's srv6
localsids. It's mainly used when new SID reservation
from locator chunks.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
base
Currently, when AS number of an existing BGP neighbor is added in a BGP
confederation, AS_CONFED_SEQUENCE segment attribute will be missing in
prefixes advertised to the neighbor. Also, receiving prefixes from the
neighbor will be withdrawn because of "Malformed AS path from A.B.C.D".
neighbor 10.100.200.3 remote-as 123
bgp confederation identifier 65001
bgp confederation peers 123
With this change, update peer's sort after adding or removing its AS
number in a BGP confederation.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Deconfiguring conditional advertisement resulted in all other policy
settings on the peer getting removed due to an excessively large memset.
This also created a desync with the northbound config tree, which caused
its own set of problems...
Fix the memset to just remove the conditional advertisement config.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
BGP_MAX_PACKET_SIZE no longer represented the absolute maximum BGP
packet size as it did before, instead it was defined as 4096 bytes,
which is the maximum unless extended message capability is negotiated,
in which case the maximum goes to 65k.
That introduced at least one bug - last_reset_cause was undersized for
extended messages, and when sending an extended message > 4096 bytes
back to a peer as part of NOTIFY data would trigger a bounds check
assert.
This patch redefines the macro to restore its previous meaning,
introduces a new macro - BGP_STANDARD_MESSAGE_MAX_PACKET_SIZE - to
represent the 4096 byte size, and renames the extended size to
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE for consistency. Code locations
that definitely should use the small size have been updated, locations
that semantically always need whatever the max is, no matter what that
is, use BGP_MAX_PACKET_SIZE.
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE should only be used as a constant
when storing what the negotiated max size is for use at runtime and to
define BGP_MAX_PACKET_SIZE. Unless there is a future standard that
introduces a third valid size it should not be used for any other
purpose.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Show alias name instead of numerical value in `show bgp <prefix>. E.g.:
```
root@exit1-debian-9:~/frr# vtysh -c 'sh run' | grep 'bgp community alias'
bgp community alias 65001:123 community-1
bgp community alias 65001:123:1 lcommunity-1
root@exit1-debian-9:~/frr#
```
```
exit1-debian-9# sh ip bgp 172.16.16.1/32
BGP routing table entry for 172.16.16.1/32, version 21
Paths: (2 available, best #2, table default)
Advertised to non peer-group peers:
65030
192.168.0.2 from home-spine1.donatas.net(192.168.0.2) (172.16.16.1)
Origin incomplete, metric 0, valid, external, best (Neighbor IP)
Community: 65001:12 65001:13 community-1 65001:65534
Large Community: lcommunity-1 65001:123:2
Last update: Fri Apr 16 12:51:27 2021
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Problem Statement:
=================
In scale setup BGP sessions start flapping.
RCA:
====
In virtualized environment there are multiple places where
MTU need to be set. If there are some places were MTU is not set
properly then there is chances that BGP packets get fragmented,
in scale setup this will lead to BGP session flap.
Fix:
====
A new tcp option is provided as part of this implementation,
which can be configured per neighbor and helps to set the TCP
max segment size. User need to derive the path MTU between the BGP
neighbors and set that value as part of tcp-mss setting.
1. CLI Configuration:
[no] neighbor <A.B.C.D|X:X::X:X|WORD> tcp-mss (1-65535)
2. Running config
frr# show running-config
router bgp 100
neighbor 198.51.100.2 tcp-mss 150 => new entry
neighbor 2001:DB8::2 tcp-mss 400 => new entry
3. Show command
frr# show bgp neighbors 198.51.100.2
BGP neighbor is 198.51.100.2, remote AS 100, local AS 100, internal link
Hostname: frr
Configured tcp-mss is 150, synced tcp-mss is 138 => new display
4. Show command json output
frr# show bgp neighbors 2001:DB8::2 json
{
"2001:DB8::2":{
"remoteAs":100,
"bgpTimerKeepAliveIntervalMsecs":60000,
"bgpTcpMssConfigured":400, => new entry
"bgpTcpMssSynced":388, => new entry
Risk:
=====
Low - This is a config driven feature and it sets the max segment
size for the TCP session between BGP peers.
Tests Executed:
===============
Have done manual testing with three router topology.
1. Executed basic config and un config scenarios
2. Verified if the config is updated in running config
during config and no config operation
3. Verified the show command output in both CLI format and
JSON format.
4. Verified if TCP SYN messages carry the max segment size
in their initial packets.
5. Verified the behaviour during clear bgp session.
6. done packet capture to see if the new segment size
takes effect.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
When we're trying to create the config for already existing router and
the AS number or instance type mismatches, we're returning the
inconsistency error and don't set the NB entry.
Any subsequent command that configures this router will crash because
every command relies on the existence of the NB entry.
Let's store the entry even when there's a mismatch to prevent the crash.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There are multiple problems:
- commit ef7c53e2 introduced a new return value 2 which broke things,
because a lot of code treats non-zero return as an error,
- there is an incorrect error returned when AS number mismatches.
This commit fixes both.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Description:
FRR doesn't re-install the routes, imported from a tenant VRF,
when bgp instance for source vrf is deleted and re-added again.
When bgp instance is removed and re-added, when import statement is already there,
then route leaking stops between two VRFs.
Every 'router bgp' command should trigger re-export of all the routes
to the importing bgp vrf instances.
When a router bgp is configured, there could be bgp vrf instance(s) importing routes from
this newly configured bgp vrf instance.
We need to export routes from configured bgp vrf to VPN.
This can impact performance, whenever we are testing scale from vrf route-leaking perspective.
We should not trigger re-export for already existing bgp vrf instances.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
Remove old BFD API usage and replace it with the new one.
Highlights:
- More shared code: the daemon gets notified with callbacks instead of
having to roll its own code to find the notified sessions.
- Less code to integrate with BFD.
- Remove hidden commands to configure single / multi hop. Use
protocol data instead.
BGP can determine if a peer is single/multi hop according to the
following criteria:
a. If the IP address is a link-local address (single hop)
b. The network is shared with peer (single hop)
c. BGP is configured for eBGP multi hop / TTL security (multi hop)
- Respect the configuration hierarchy:
a. Peer configuration take precendence over peer-group
configuration.
b. When peer group configuration is removed, reset peer
BFD configurations to defaults (unless peer had specific
configs).
Example:
neighbor foo peer-group
neighbor foo bfd profile X
neighbor 192.168.0.2 peer-group foo
neighbor 192.168.0.2 bfd
! If peer-group is removed the profile configuration gets
! removed from peer 192.168.0.2, but BFD will still enabled
! because of the neighbor specific bfd configuration.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If we have a SAFI conflict, ie we are trying to activate safi's
UNICAST and LABELED_UNICAST at the same time, we should not
cause bestpath to be rerun and we should not try to put
labels on everything.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When you use a single BGP session for both IPv4 and IPv6 it's a bit
annoying going into ipv6 address-family and explicitly activating it.
Let's get this automatically if enabled with `bgp default ipv6-unicast`.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Description:
When user is config connect timer, it doesn't reflect
immediately. It reflect when next time neighbor is tried to reconnect.
Problem Description/Summary :
When user is config connect timer, it doesn't reflect
The network connection was aborted by the local system.d to reconnect.
Fix is to update the connect timer immediately if BGP
session is not in establish state.
Expected Behavior :
If neighbor is not yet established, we should immediately apply the config connect timer to the peer.
Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
Add SNMP support for L3vpn Vrf table as defined in [RFC4382]
Keep track of vrf status for the table and for future traps.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Unconfig not resetting the peer-group member allowas_in[afi][safi]
This is causing remote route to be accept.
Signed-off-by: Kishore Kunal <kishorekunal01@broadcom.com>
Description:
Holdtime and keepalive parameters weren't copied from
peer-group to peer-group members. Fixed the issue by copying holdtime
and keepalive parameters from peer-group to its members.
Problem Description/Summary :
Holdtime and keepalive parameters weren't copied from
peer-group to peer-group members. Fixed the issue by copying holdtime
and keepalive parameters from peer-group to its members.
Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
The command `neighbor PGROUP ttl-security hops X` was being
accepted but ignored. Allow it to be stored. I am still
not sure that this is applied correctly, but that is another
problem.
Fixes: #7848
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
A bgp neighbor remains in Idle state in the event that the number
of received prefixes exceeds the configured maximum prefix for the
neighbor. The neighbor remains in idle state even after de-configuring
the maximum prefix limit for the neighbor.
The fix is to clear the neighbor overflow state if set, after
de-configuring the neighbor maximum-prefix commnd.
This allows the neighbor to establish without having to perform a
clear operation. It also avoids the misleading neigbor summary
indicating that the neighbor is in prefix overflow state (PfxCt)
when no limit is configured for the neighbor.
Signed-off-by: Dewi Morgan <dewi.morgan@intl.att.com>
When adding/removing some peer's flag we need to make sure we FORCE updates
to avoid suppressing critical updates.
Like entering `no neighbor x.x.x.x send-community large` would suppress
updates by default and another side will have stale large communities.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Fix `peer_default_originate_unset` so default route can be withdrawn
when `default-originate` option is being unset from a peer-group.
The loop calling `bgp_default_originate` is clearing default-originate
from the peer-group peer `peer` instead of the peer-group member peer
`member`.
Signed-off-by: zyxwvu Shi <shiyuchen.syc@bytedance.com>
On top of the recent `bgp suppress-fib-pending which
was at a BGP_NODE level, add this command at the CONFIG_NODE
level as well and allow the command to apply to all instances
of bgp running.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a bit of code to allow bgp to send the AS-Path associated with
the route being installed to zebra so it can be displayed and
used as part of the `show ip route A` command in zebra.
eva# show ip route 20.0.0.0/11
Routing entry for 20.0.0.0/11
Known via "bgp", distance 20, metric 0, best
Last update 00:00:00 ago
* 192.168.161.1, via enp39s0, weight 1
AS-Path: 60000 64539 15096 6939 8075
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Changes implement dampening profiles for peers and peer groups. This is
achieved by introducing the possibility to have multible existing
dampening configurations with their own sets of parameters and lists of
associated paths.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
ES-VRF entries are maintained for the purpose of L3-NHG creation -
1. Each ES-EVI entry is associated with a tenant VRF. This associaton
triggers the creation of an ES-VRF entry.
2. Type-2/MAC-IP routes are imported into a tenant VRF and programmed as
a /32 or host route entry in the dataplane. If the destination of
the host route is a remote-ES the route is programmed with the
corresponding (keyed in by {vrf,ES-id}) L3-NHG.
3. The reason for this indirection (route->L3-NHG, L3-NHG->list-of-VTEPs)
is to avoid route updates to the dplane when a remote-ES link flaps i.e.
instead of updating all the dependent routes the NHG's contents are
updated. This reduces the amount of dataplane updates (fewer nhg updates vs.
route updates) allowing for a faster failover.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The return from sockunion2hostprefix tells us if the conversion
succeeded or not. There are places in the code where we
always assume that it just `works`, since it can fail
notice and try to do the right thing.
Please note that failure of this function for most cases
of sockunion2hostprefix is highly highly unlikely as that
the sockunion was already created and tested elsewhere
it's just that this function can fail.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a BGP vrf instance is deleted, the routes it exported into the
main VPN table are not deleted and they remain as stale routes
attached to an unknown bgp instance. When the new vrf instance comes
along, it imports these routes from the main table and thus we see
duplicatesalongside its own identical routes.
The solution is to call the unexport logic when a BGP vrf instance is
being deleted.
problem example
---------------
volta1# sh bgp vrf VRF-a ipv4 unicast
BGP table version is 4, local router ID is 18.0.0.1, vrf id 5
Default local pref 100, local AS 567
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 7.0.0.6/32 7.0.0.5@0< 10 100 0 ?
*> 7.0.0.8/32 18.0.0.8 0 0 111 ?
*> 18.0.0.0/24 18.0.0.8 0 0 111 ?
*> 56.0.0.0/24 7.0.0.5@0< 0 100 0 ?
Displayed 4 routes and 4 total paths
volta1# conf t
volta1(config)# no router bgp 567 vrf VRF-a
volta1(config)#
volta1(config)# router bgp 567 vrf VRF-a
volta1(config-router)# bgp router-id 18.0.0.1
volta1(config-router)# no bgp ebgp-requires-policy
volta1(config-router)# no bgp network import-check
volta1(config-router)# neighbor 18.0.0.8 remote-as 111
volta1(config-router)# !
volta1(config-router)# address-family ipv4 unicast
volta1(config-router-af)# label vpn export 12345
volta1(config-router-af)# rd vpn export 567:111
volta1(config-router-af)# rt vpn both 567:100
volta1(config-router-af)# export vpn
volta1(config-router-af)# import vpn
volta1(config-router-af)# exit-address-family
volta1(config-router)# !
volta1(config-router)# end
volta1# sh bgp vrf VRF-a ipv4 unicast
BGP table version is 4, local router ID is 18.0.0.1, vrf id 5
Default local pref 100, local AS 567
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 7.0.0.6/32 7.0.0.5@0< 10 100 0 ?
* 7.0.0.8/32 18.0.0.8 0 0 111 ?
*> 18.0.0.8@-< 0 0 111 ?
* 18.0.0.0/24 18.0.0.8 0 0 111 ?
*> 18.0.0.8@-< 0 0 111 ?
*> 56.0.0.0/24 7.0.0.5@0< 0 100 0 ?
Displayed 4 routes and 6 total paths
@- routes indicating unknown bgp instance are imported
Signed-off-by: Pat Ruddy <pat@voltanet.io>
if the user sets the ebgp-multihop for a neighbor to the same value
we currently have, avoid resetting the session and just return a
silent success.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
* Added CLI command "[no] bgp suppress-fib-pending" to enable and
disable suppress-fib-pending
* Send ZEBRA_ROUTE_NOTIFY_REQUEST to zebra when "bgp suppress-fib-pending"
is enabled or disabled
* Define BGP_DEFAULT_UPDATE_ADVERTISEMENT_TIME which is the delay added
to update group timer.
* Added error codes
Signed-off-by: kssoman <somanks@gmail.com>
We are allocating temporary memory for information about
what to process in this thread, which is not being cleaned
up on thread cancelling.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The `struct listnode *rt_node` data structure is adding
8 bytes of size to the `struct bgp_dest`. This is a large
amount of data for a flag we are already setting on each
node for this. Just set the flag and use that to figure
out who we are doing graceful restart on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Sample Configuration with prefix-list and community match rules
---------------------------------------------------------------
R1 ------- R2(DUT) ------- R3
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 20.20.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/32
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.20.3 soft-reconfiguration inbound
neighbor 10.10.20.3 advertise-map ADV-MAP non-exist-map EXIST-MAP
exit-address-family
!
ip prefix-list DEFAULT seq 5 permit 1.1.1.5/32
ip prefix-list DEFAULT seq 10 permit 1.1.1.1/32
ip prefix-list EXIST seq 5 permit 10.10.10.10/32
ip prefix-list DEFAULT-ROUTE seq 5 permit 0.0.0.0/0
ip prefix-list IP1 seq 5 permit 10.139.224.0/20
ip prefix-list T2 seq 5 permit 1.1.1.5/32
!
bgp community-list standard DC-ROUTES seq 5 permit 64952:3008
bgp community-list standard DC-ROUTES seq 10 permit 64671:501
bgp community-list standard DC-ROUTES seq 15 permit 64950:3009
bgp community-list standard DEFAULT-ROUTE seq 5 permit 65013:200
!
route-map ADV-MAP permit 10
match ip address prefix-list IP1
!
route-map ADV-MAP permit 20
match community DC-ROUTES
!
route-map EXIST-MAP permit 10
match community DEFAULT-ROUTE
match ip address prefix-list DEFAULT-ROUTE
!
line vty
!
end
Router2#
Router2# show ip bgp 0.0.0.0
BGP routing table entry for 0.0.0.0/0
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
10.10.10.1 10.10.20.3
1
10.10.10.1 from 10.10.10.1 (10.139.224.1)
Origin IGP, metric 0, valid, external, best (First path received)
Community: 64848:3011 65011:200 65013:200
Last update: Tue Oct 6 02:39:42 2020
Router2#
Sample output with non-exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< non-exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 not advertised
Total number of prefixes 2
Sample output with non-exist-map when default route not present in table
------------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< non-exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 advertised
Total number of prefixes 3
Router2#
Sample output with exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2#
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 advertised
Total number of prefixes 4
Router2#
Sample output with exist-map when default route not present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 not advertised
Total number of prefixes 1
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
Implemented as per the feature description given in the source link.
Descriprion:
The BGP conditional advertisement feature uses the non-exist-map or exist-map
and the advertise-map keywords of the neighbor advertise-map command in order
to track routes by the route prefix.
non-exist-map :
If a route prefix is not present in output of the non-exist-map command, then
the route specified by the advertise-map command is announced.
exist-map :
If a route prefix is present in output of the exist-map command, then the route
specified by the advertise-map command is announced.
The conditional BGP announcements are sent in addition to the normal
announcements that a BGP router sends to its peers.
The conditional advertisement process is triggered by the BGP scanner process,
which runs every 60 seconds. This means that the maximum time for the conditional
advertisement to take effect is 60 seconds. The conditional advertisement can take
effect sooner, depending on when the tracked route is removed from the BGP table
and when the next instance of the BGP scanner occurs.
Sample Configuration on DUT
---------------------------
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 200.200.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/24
ipv6 address 2001:db8::2/128
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
network 2.2.2.0/24
network 200.200.0.0/16
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 advertise-map ADVERTISE non-exist-map CONDITION
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
address-family ipv6 unicast
network 2001:db8::2/128
network 2001:db8::200/128
neighbor 10.10.10.1 activate
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 advertise-map ADVERTISE_6 non-exist-map CONDITION_6
neighbor 10.10.20.3 activate
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
access-list CONDITION seq 5 permit 3.3.3.0/24
access-list ADVERTISE seq 5 permit 2.2.2.0/24
access-list ADVERTISE seq 6 permit 200.200.0.0/16
access-list ADVERTISE seq 7 permit 20.20.0.0/16
!
ipv6 access-list ADVERTISE_6 seq 5 permit 2001:db8::2/128
ipv6 access-list CONDITION_6 seq 5 permit 2001:db8::3/128
!
route-map ADVERTISE permit 10
match ip address ADVERTISE
!
route-map CONDITION permit 10
match ip address CONDITION
!
route-map ADVERTISE_6 permit 10
match ipv6 address ADVERTISE_6
!
route-map CONDITION_6 permit 10
match ipv6 address CONDITION_6
!
line vty
!
end
Router2#
Withdraw when non-exist-map prefixes present in BGP table:
----------------------------------------------------------
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 3.3.3.0/24 10.10.20.3 0 0 3 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 4 routes and 4 total paths
For address family: IPv6 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::3/128 fe80::a00:27ff:fe76:6738 0 0 3 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 4 routes and 4 total paths
Router2#
Router2# show ip bgp neighbors 10.10.10.1
BGP neighbor is 10.10.10.1, remote AS 1, local AS 2, external link
!--- Output suppressed.
For address family: IPv4 Unicast
Update group 9, subgroup 5
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION, Advertise-map *ADVERTISE, status: Withdraw
1 accepted prefixes
For address family: IPv6 Unicast
Update group 10, subgroup 6
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION_6, Advertise-map *ADVERTISE_6, status: Withdraw
1 accepted prefixes
!--- Output suppressed.
Router2#
Here 2.2.2.0/24 & 200.200.0.0/16 (prefixes in advertise-map) are withdrawn
by conditional advertisement scanner as the prefix(3.3.3.0/24) specified
by non-exist-map is present in BGP table.
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 0.0.0.0 0 1 i
*> 3.3.3.0/24 0.0.0.0 0 3 i
Total number of prefixes 2
For address family: IPv6 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 :: 0 1 i
*> 2001:db8::3/128 :: 0 3 i
*> 2001:db8::200/128 :: 0 32768 i
Total number of prefixes 3
Router2#
Advertise when non-exist-map prefixes not present in BGP table:
---------------------------------------------------------------
After Removing 3.3.3.0/24 (prefix present in non-exist-map),
2.2.2.0/24 & 200.200.0.0/16 (prefixes present in advertise-map) are advertised
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 3 routes and 3 total paths
For address family: IPv6 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 3 routes and 3 total paths
Router2#
Router2# show ip bgp neighbors 10.10.10.1
!--- Output suppressed.
For address family: IPv4 Unicast
Update group 9, subgroup 5
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION, Advertise-map *ADVERTISE, status: Advertise
1 accepted prefixes
For address family: IPv6 Unicast
Update group 10, subgroup 6
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION_6, Advertise-map *ADVERTISE_6, status: Advertise
1 accepted prefixes
!--- Output suppressed.
Router2#
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 0.0.0.0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Total number of prefixes 3
For address family: IPv6 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 :: 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::200/128 :: 0 32768 i
Total number of prefixes 3
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
We currently have a global process queue for handling route
updates in bgp. This is fine, in general, except there are
places and times where we plug the queue for no new work
during certain peer states of bgp update delay. If we
happen to be processing multiple bgp instances on startup
why do we want to stop processing in vrf A when vrf B
is in a bit of a pickle?
Also this separation will allow us to start forward thinking
about how to fully integrate pthreads into route processing
in bgp.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The MH datastructures were being released before the paths that were
referencing them. Fix is to do the MH cleanup last.
The MH finish function has also been stripped down to only do a
datastructure cleanup i.e. avoid sending route updates etc.
Ticket: 31376
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Problem found that if a router-id was not defined or derived
initially, the bgp->router_id would be set to 0x0 and used
for determining auto-rd values. When bgp received a subsequent
router-id update from zebra, bgp would not completely process
the update since it was treated as updating an already derived
router-id with a new value, which is not desired. This also
could leave the auto rd/rt inforamation missing or invalid in
some cases. This fix allows updating the derived router-id if
the previous value was 0/0.
Ticket: CM-31441
Signed-off-by: Don Slice <dslice@nvidia.com>
