1. Added interface name, group address and detail option to existing
"show ip igmp groups" so that user can retrieve all the groups
or a particular group for an interface. Detail option shows the source
information for the group. With that, the show command
looks like:
"show ip igmp [vrf NAME$vrf_name] groups [INTERFACE$ifname [GROUP$grp_str]] [detail$detail] [json$json]"
2. Changed pim_cmd_lookup_vrf() to return empty JSON if VRF is not present
3. Changed "detail" option to print non pretty JSON
4. Added interface name and group address to existing
"show ip igmp sources" so that user can retrieve all the sources for
all the groups or, all the sorces for a particular group for an
interface. With that, the show command looks like:
"show ip igmp [vrf NAME$vrf_name] sourcess [INTERFACE$ifname [GROUP$grp_str]] [json$json]"
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
The scale_up.py script used by several tests installs 50k routes into the rib from
sharpd. It is first looking for the results in the bgp database. Let's ensure
that the routes are actually installed into the rib first before looking in
the bgp tables. This should help situations where the system is under extreme
load.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The test ensures that the incoming prefixes are received with
the appropriate label value, and that connectivity is ensured
between prefixes.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Locally, the bgp_evpn_vxlan_svd_topo1 and bgp_evpn_vxlan_topo1
tests are failing for me. Upon inspection the test is looking
for the mac addresses of the interfaces participating in the
evpn bridging on the hosts. For some reason on my machine
these mac addresses are not in the l2 tables at all on
PE1 or PE2. Adding quick pings solves the problems.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
For multicast pimv6 join and traffic, socat is
used, which was not cleaned up post tests executions,
enhanced kill_socat() API to kill socat join and
traffic specific PIDs during teardown module.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
At this point OSPF NSSA deserves a dedicated topotest given the
latest nerd knobs that were added :)
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Combine all variation of the "area nssa" command into a single
DEFPY to improve code maintainability.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Prior to this the full retry cycle was run with a "passing" negative
result each time through
Previous runtime ~5 minutes
New runtime ~20 seconds.
Signed-off-by: Christian Hopps <chopps@labn.net>
Test failed time to time, let's try this way:
```
$ for x in $(seq 1 20); do cp test_bgp_labeled_unicast_addpath.py test_$x.py; done
$ sudo pytest -s -n 20
```
Ran 10 times using this pattern, no failure 🤷
Before this change, we checked advertised routes, and at some point `=` was
missing from the output, but advertised correctly. Receiving router gets as
much routes as expected to receive.
I reversed checking received routes, not advertised.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
If we set `bgp route-map delay-timer X`, we should ignore starting to announce
routes immediately, and wait for delay timer to expire (or ignore at all if set
to zero).
f1aa49293a broke this because we always sent
route refresh and on receiving BoRR before sending back EoRR.
Let's get fix this.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
