When the decision has been made to copy a peer configuration from
a peer to another peer because one is taking over. Do not automatically
set the CONFIG_NODE flag. Instead we need to handle that appropriately
when the final decision is made to transfer.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When changing the peers sockunion structure the bgp->peer
list was not being updated properly. Since the peer's su
is being used for a sorted insert then the change of it requires
that the value be pulled out of the bgp->peer list and then
put back into as well.
Additionally ensure that the hash is always released on peer
deletion.
Lead to this from this decode in a address sanitizer run.
=================================================================
==30778==ERROR: AddressSanitizer: heap-use-after-free on address 0x62a0000d8440 at pc 0x7f48c9c5c547 bp 0x7ffcba272cb0 sp 0x7ffcba272ca8
READ of size 2 at 0x62a0000d8440 thread T0
#0 0x7f48c9c5c546 in sockunion_same lib/sockunion.c:425
#1 0x55cfefe3000f in peer_hash_same bgpd/bgpd.c:890
#2 0x7f48c9bde039 in hash_release lib/hash.c:209
#3 0x55cfefe3373f in bgp_peer_conf_if_to_su_update bgpd/bgpd.c:1541
#4 0x55cfefd0be7a in bgp_stop bgpd/bgp_fsm.c:1631
#5 0x55cfefe4028f in peer_delete bgpd/bgpd.c:2362
#6 0x55cfefdd5e97 in no_neighbor_interface_config bgpd/bgp_vty.c:4267
#7 0x7f48c9b9d160 in cmd_execute_command_real lib/command.c:949
#8 0x7f48c9ba1112 in cmd_execute_command lib/command.c:1009
#9 0x7f48c9ba1573 in cmd_execute lib/command.c:1162
#10 0x7f48c9c87402 in vty_command lib/vty.c:526
#11 0x7f48c9c87832 in vty_execute lib/vty.c:1291
#12 0x7f48c9c8e741 in vtysh_read lib/vty.c:2130
#13 0x7f48c9c7a66d in thread_call lib/thread.c:1585
#14 0x7f48c9bf64e7 in frr_run lib/libfrr.c:1123
#15 0x55cfefc75a15 in main bgpd/bgp_main.c:540
#16 0x7f48c96b009a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
#17 0x55cfefc787f9 in _start (/usr/lib/frr/bgpd+0xe27f9)
0x62a0000d8440 is located 576 bytes inside of 23376-byte region [0x62a0000d8200,0x62a0000ddd50)
freed by thread T0 here:
#0 0x7f48c9eb9fb0 in __interceptor_free (/lib/x86_64-linux-gnu/libasan.so.5+0xe8fb0)
#1 0x55cfefe3fe42 in peer_free bgpd/bgpd.c:1113
#2 0x55cfefe3fe42 in peer_unlock_with_caller bgpd/bgpd.c:1144
#3 0x55cfefe4092e in peer_delete bgpd/bgpd.c:2457
#4 0x55cfefdd5e97 in no_neighbor_interface_config bgpd/bgp_vty.c:4267
#5 0x7f48c9b9d160 in cmd_execute_command_real lib/command.c:949
#6 0x7f48c9ba1112 in cmd_execute_command lib/command.c:1009
#7 0x7f48c9ba1573 in cmd_execute lib/command.c:1162
#8 0x7f48c9c87402 in vty_command lib/vty.c:526
#9 0x7f48c9c87832 in vty_execute lib/vty.c:1291
#10 0x7f48c9c8e741 in vtysh_read lib/vty.c:2130
#11 0x7f48c9c7a66d in thread_call lib/thread.c:1585
#12 0x7f48c9bf64e7 in frr_run lib/libfrr.c:1123
#13 0x55cfefc75a15 in main bgpd/bgp_main.c:540
#14 0x7f48c96b009a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a peer is a peer-group based peer, and the config is inherited
from the peer group, let's ensure that the CONFIG_NODE flag stays
no matter what.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Three fixes:
a) When calling bgp_fsm_change_status with `Deleted` do
not add a new event to the peer's t_event because
we are already in the process of deleting everything
b) When bgp_stop decides to delete a peer return a notification
that it is happening to bgp_event_update so that it does not
set the peer state back to idle or do other processing.
c) bgp_event_update can cause a peer deletion, because
the peer can be deleted in the fsm function but the peer
data structure is still pointed to and used after words.
So lock the peer before entering and prevent a use after
free.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
At some point in the past the peer creation was not
properly setting the su and the code had the release
and re-add when setting the su. Since peer_create
got a bit of code to handle the su properly the
need to release then add it back in is negated
so remove the code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The `behavior usid` command is installed under the SRv6 Locator node in
the zebra VTY. However, in the SRv6 config write function this command
is wrongly put on the same line as the `prefix X:X::X:X/M` command.
This causes a failure when an SRv6 uSID locator is configured in zebra
and `frr-reload.py` is used to reload the FRR configuration.
This commit prepends a newline character to the `behavior usid` command
in the SRv6 config write function. The output of `show running-config`
before and after this commit is shown below.
Before:
```
Building configuration...
Current configuration:
!
frr version 8.5-dev
!
segment-routing
srv6
locators
locator loc1
prefix fc00:0:1::/48 block-len 32 node-len 16 behavior usid
exit
!
exit
!
exit
!
exit
!
end
```
After:
```
Building configuration...
Current configuration:
!
segment-routing
srv6
locators
locator loc1
prefix fc00:0:1::/48 block-len 32 node-len 16
behavior usid
exit
!
exit
!
exit
!
exit
!
end
```
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Documentation ways that community-list works as OR when multiple community
values specified per entry, but it's wrong. It must be AND, let's fix this.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
frrouting/frr:master will be generated every day
frrouting/frr:vX.Y.Z will be generated every time a new push is done on the
stable/X.Y branch.
Takes up to 3 hours to build and publish images.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The first argument of sid_unregister should be default bgp instance.
However, these functions passed VRF bgp instance to this funciton.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
In bgp_srv6l3vpn tests, check_ping checks reachability. However, this
function have a bug and if we set expect_connected to True, check will
pass even if all ping packets are lost. This commit fixes this issue.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
This commit eaeba5e868 changed a bit a formatting,
but this part was missed, let's fix it.
An example before the patch:
```
r3# sh ip bgp ipv4 labeled-unicast neighbors 192.168.34.4 advertised-routes
BGP table version is 3, local router ID is 192.168.34.3, vrf id 0
Default local pref 100, local AS 65003
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 10.0.0.1/32 0.0.0.0 0 65001 ?
Total number of prefixes 1
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The `bgp_srv6l3vpn_to_bgp_vrf2` topotest tests the SRv6 IPv4 L3VPN
functionality. It applies the appropriate configuration in `bgpd` and
`zebra`, and then checks that the RIB is updated correctly.
The topotest expects to find the AS-Path in the RIB, which is only
present if the `bgp send-extra-data zebra` option is enabled in the
`bgpd` configuration.
Currently, the `bgp send-extra-data zebra` option is not set in the
`bgpd` configuration, which always causes the topotest to fail.
This commit fixes the `bgp_srv6l3vpn_to_bgp_vrf2` topotest by enabling
the `bgp send-extra-data zebra` option for both routers `r1` and `r2`.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Use %pI4/%pI6 where possible, otherwise at least atjust stack buffer sizes
for inet_ntop() calls.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
bgp_pcount_adjust() is called only when calling bgp_path_info_set_flag().
Before this patch the pcount is not advanced before checking for overflow.
Additionally, print:
```
[RZMGQ-A03CG] 192.168.255.1(r1) rcvd UPDATE about 172.16.255.254/32 IPv4 unicast -- DENIED due to: maximum-prefix overflow
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The ospf6_route_cmp_nexthops function was returning 0 for same
and 1 for not same. Let's reverse the polarity and actually make
the returns useful long term.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Every 1/2 hour my logs are filling up with this:
2022-11-26 13:54:47.531 [DEBG] ospfd: [P4PQ9-K4XFD] DR-Election[1st]: Backup 192.168.119.229
2022-11-26 13:54:47.531 [DEBG] ospfd: [HBZ7F-65Y86] DR-Election[1st]: DR 192.168.119.229
2022-11-26 13:54:47.531 [DEBG] ospfd: [H01MF-RN00N] DR-Election[2nd]: Backup 0.0.0.0
2022-11-26 13:54:47.531 [DEBG] ospfd: [R7BJ4-KP8JT] DR-Election[2nd]: DR 192.168.119.229
This should be guarded by an if check to ensure that the operator really
wants to see this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
My log file is filling up with:
2022-11-26 13:24:47.532 [DEBG] ospfd: [RY794-DQ7AK] interface 192.168.119.229 [2] join AllDRouters Multicast group.
Every 1/2 hour. There is nothing an operator needs to do here and nothing
that they can change. Let's guard this output.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
