Add a 'copy' cli that reads a file into the current running
config. Add an entry about the new cli to the user doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use an alias for the daemons who process the nexthop-group
config cli; makes it easier to expand that list in the future.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
instead of suppressing the 'exit' markers at the end of each
'interface XXX' clause in the mpls ldp configuration, mark
those with a special marker 'exit-ldp-if' and teach the
reload script to correctly recognize the new sub-subcontext
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
This allows to set motd from an input instead of creating a file.
Example:
root@exit2-debian-9:~/frr# telnet 127.0.0.1 2605
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
Hello, this is bgpd
User Access Verification
Password:
exit2-debian-9> enable
exit2-debian-9# sh run
Current configuration:
!
frr version 7.3-dev-MyOwnFRRVersion
frr defaults traditional
!
hostname exit2-debian-9
password belekas
log file /var/log/frr/labas.log
log syslog informational
banner motd line Hello, this is bgpd
!
!
!
line vty
!
end
exit2-debian-9#
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
frr-reload.py has many special case rules that did not consider ldpd
at all. Specifically:
1. The bulk of ldp configuration comes in a big 'mpls ldp' context, which was
previously considered a single-line context as it started with 'mpls'. This
rule should only apply to labels and lsps.
2. ldp has a 'router-id' config line that fell into the same rule as the above
one. It should not be considered a single-line context as more ldp
configuration can follow.
3. enabled interfaces should not end their context. A better fix
would actually require popping a new context for each interface
in case there is any interface-specific config, but at least this
fix will address the most common use case.
4. when declaring pseudowires, any line with 'member pseudowire XXX' should
be considered a sub-context of the 'l2vpn YYY type ZZZ' context. Without
this fix, changes in the first psuedowire declared would not correctly
be processed (e.g. removing a 'control-word exclude' line would not
be picked up).
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Guard the libyang debug messages under this command so that only
people interested on those messages will see them.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
getrusage, in a heavily stressed system, can account for
signficant running time due to process switching to the kernel.
Allow the end-operator to specify `--disable-cpu-time` to
avoid this call. Additionally we cause `show thread cpu` to
not show up if this is selected.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The right way to implement this command in vtysh is the following:
* Send the command to each running FRR daemon;
* Collect the command output from each daemon;
* Parse the text outputs into libyang lyd_node structures. Then merge
all these data trees into a single one. Finally, print the merged
data trees to the standard output (libyang will take care of
combining duplicate nodes as necessary).
What this commit does is to allow vtysh to send the "show yang
operational-data" command to a single daemon only (the last
parameter). It's a quick workaround to allow us to write topotests
using YANG-modeled data until we do the real thing (full vtysh
northbound integration).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This command is defined in the lib/northbound_cli.c file, which
is not being parsed by vtysh since most commands from there need
special handling in the context of vtysh. The "debug northbound"
command, however, can be made available to vtysh without problems.
Introduce a new DEFUNSH to do that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This implements BMP. There's no fine-grained history here, the non-BMP
preparations are already split out from here so all that remains is BMP
proper.
Signed-off-by: David Lamparter <equinox@diac24.net>
Couple code paths end up trying to dereference vty->of which can be null
in one special case.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add the ability to parse `router eigrp AS [vrf NAME]` and
modify eigrp_lookup to actually handle a vrf_id for us.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The correct cast for these is (unsigned char), because "char" could be
signed and thus have some negative value. isalpha & co. expect an int
arg that is positive, i.e. 0-255. So we need to cast to (unsigned char)
when calling any of these.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
VRF context blocks have a context-specific exit command in order to
explicitly force an exit to the top level config node. This command
exists because 'ip route' commands are accepted in both VRF_NODE and
CONFIG_NODE, so static routes intended to be accepted in CONFIG_NODE
that immediately follow a VRF_NODE block will be shoved into the
VRF_NODE block unless the VRF context is explicitly exited.
However, because this is a command that exits to CONFIG_NODE, vtysh -m
should be printing an `end` at the end of the context, since
frr-reload.py relies on this context ender to know when it's back in
CONFIG_NODE. But since this is the only explicit context exit command
that also exits to CONFIG_NODE we don't really have a good way of doing
this already. Hence this god-awful patch.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Now that multiple daemons understand nexthop-groups, we need
to ensure that vtysh doesn't double print out the individual
nexthops that are part of a nexthop-group.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When using pam for authentication, the code just silently
fails and gives no indication to the end user what has gone
wrong. Try to increase messaging about what has gone wrong
by outputting some more data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use %% style for errors in log commands and switch
tabs to a single space in output. Also, remove un-needed
output for success.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add vtysh commands to add/del/clear/show filters across
all daemons and independently on each one. Add automake and
clippy boilerplate for those commands as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Update show work-queue to use the execute_name() code
path when dispatching to a specific daemon.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add static function path for exectuting a command
on a client daemon via a string of its name only.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Added a CLI "debug route-map" to enble route-map debugs
Added debugs for following triggers
1. Add/delete a route-map
2. Add/delete a sequence in route-map
3. Add/delete a match statement(dependency)
4. Update a dependency
5. Apply a route-map
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
When the user specifies -N namespace allow it to influence the
frr_vtydir(DAEMON_VTY_DIR) to have namespace in it's path
like so: $frrstate_dir/<namespace>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Although the RFC states hostname length should be < 255 chars,
FRR allows infinite length technically. However, when you try
to set a hostname > 80 chars, you would immediately notice a crash.
RCA: Crash due to buffer overflow. Large buffer sprintf'd into smaller
buffer. Usage of sprintf function instead of snprintf which is safer.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
* Change 'begins_with' to 'frrstr_startswith' for consistency
* Add suffix checker, frrstr_endswith()
* Update vtysh to use the new function
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Each of Lua's major versions are incompatible with each other. Ubuntu,
at least, does not provide a single liblua.so or /usr/include/lua; all
SOs and headers are versioned, e.g. liblua5.3.so and
/usr/include/lua5.3. There's already an m4 macro in the GNU collection
to handle this situation, so let's use that.
This allows building with Lua enabled to work on platforms other than
Fedora.
* Move lib/lua.[ch] -> lib/frrlua.[ch] to prevent path conflicts
* Fix configure.ac search for proper CPP and linker flags
* Add Lua include path to AM_CPPFLAGS
* Update vtysh/extract.pl.in
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Merge commit to solve a bunch of conflicts with other PRs that were
merged in the previous weeks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
I just straight up forgot checking VTYSH_PAGER at startup, and the
"terminal paginate" command is only installed to VIEW_NODE so it can't
be processed from vtysh.conf in CONFIG_NODE...
Signed-off-by: David Lamparter <equinox@diac24.net>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
* Turn the "instance" YANG presence-container into a YANG list keyed
by the new "vrf" leaf. This is a backward incompatible change but
this should be ok for now.
* RIPng VRF instances can be configured even when the corresponding
VRF doesn't exist. And a RIPng VRF instance isn't deleted when
the corresponding VRF is deleted. For this to work, implement the
ripng_instance_enable() and ripng_instance_disable() functions
that are called to enable/disable RIPng routing instances when
necessary. A RIPng routing instance can be enabled only when the
corresponding VRF is enabled (this information comes from zebra
and depends on the underlying VRF backend). Routing instances are
stored in the new ripng_instances rb-tree (global variable).
* Add a vrf pointer to the ripng structure instead of storing vrf_id
only. This is much more convenient than using vrf_lookup_by_id()
every time we need to get the vrf pointer from the VRF ID. The
ripng->vrf pointer is updated whenever the VRF enable/disable hooks
are called.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Turn the "instance" YANG presence-container into a YANG list keyed
by the new "vrf" leaf. This is a backward incompatible change but
this should be ok for now.
* RIP VRF instances can be configured even when the corresponding
VRF doesn't exist. And a RIP VRF instance isn't deleted when
the corresponding VRF is deleted. For this to work, implement the
rip_instance_enable() and rip_instance_disable() functions that are
called to enable/disable RIP routing instances when necessary. A
RIP routing instance can be enabled only when the corresponding
VRF is enabled (this information comes from zebra and depends on
the underlying VRF backend). Routing instances are stored in the new
rip_instances rb-tree (global variable).
* Add a vrf pointer to the rip structure instead of storing vrf_id
only. This is much more convenient than using vrf_lookup_by_id()
every time we need to get the vrf pointer from the VRF ID. The
rip->vrf pointer is updated whenever the VRF enable/disable hooks
are called.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Allow the sharp daemon to understand and use nexthop-groups.
This commit is merely to allow sharpd to understand them
when accepted in a future commit
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
- no longer try to special-case a custom terminal length; the OS has
procedures for that (SIGWINCH & TIOCGWINSZ)
- only use a pager if requested by CLI command or VTYSH_PAGER. The
behaviour with VTYSH_PAGER set should be compatible to previous
versions.
Signed-off-by: David Lamparter <equinox@diac24.net>
When running ospf instances we should not attempt to reconnect
the default ospf instance on running a command.
This commit should be targeted enough because in the case
of normal operation we connect to everything we should
and only set the VTYSH_WAS_ACTIVE flag for those we
truly have lost connection too.
Before:
donna.cumulusnetworks.com# config t
donna.cumulusnetworks.com(config)# router ospf 100
Warning: connecting to ospfd...failed!
donna.cumulusnetworks.com(config-router)#
After:
donna.cumulusnetworks.com# conf t
donna.cumulusnetworks.com(config)# router ospf 100
donna.cumulusnetworks.com(config-router)# end
donna.cumulusnetworks.com#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We weren't cleaning up some files (a whole lot of python foobar) and had
some files in the dist tarball that don't quite belong there.
Signed-off-by: David Lamparter <equinox@diac24.net>
Resolves issue with exit-vrf being placed at the end of zebra's portion
of a vrf block, but before other daemons' portions of the same config
block.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We don't need termcap/tinfo/curses, those are just for libreadline. On
most modern systems, libreadline will pull in the appropriate libs it
needs on its own, so unconditionally adding them adds an extra unneeded
dependency for us.
Still need to try with curses/... for some systems, but only after bare
readline fails.
Signed-off-by: David Lamparter <equinox@diac24.net>
When reading in config files and we have failures on multiple
lines actually note the actual failure lines and return them.
This fixes an issue where we stopped counting errors after
the first one and we got missleading line numbers that
did not correspond to the actual problem.
This is fixed:
sharpd@donna ~/frr> sudo /usr/lib/frr/pimd --log=stdout -A 127.0.0.1 -f /etc/frr/pimd.conf
2018/10/11 09:41:01 PIM: VRF Created: default(0)
2018/10/11 09:41:01 PIM: pim_vrf_enable: for default
2018/10/11 09:41:01 PIM: zclient_lookup_sched_now: zclient lookup immediate connection scheduled
2018/10/11 09:41:01 PIM: zclient_lookup_new: zclient lookup socket initialized
2018/10/11 09:41:01 PIM: pimd 6.1-dev starting: vty@2611
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 2: inteface lo
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 3: ip igmp
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 4: ip igmp join 224.1.1.1 13.13.13.2
^C2018/10/11 09:45:09 PIM: Terminating on signal SIGINT
2018/10/11 09:45:09 PIM: VRF Deletion: default(0)
Fixes: #3161
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The existing commands "ip as-path", "ip community list", "ip extcommunity
list" & "ip largecommunity list" is used to configure both for ipv4 and
ipv6. So the prefix "ip" is removed from these commands.
All the configuration, show related configuration, show running config
& boot up with write memory is also verified with the provided fix.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Whether or not RPKI is enabled during build shouldn't really influence
vtysh; the user can always manually install bgpd_rpki.so later and it
should work. This also means that the behaviour of "RPKI module not
loaded" is consistent regardless of whether it was a compile-time or
runtime decision.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
Note: no more --with-rfp-path on configure - badly messing with the
build system like this really isn't how to do a conditional external
dependency.
Signed-off-by: David Lamparter <equinox@diac24.net>
The new_completion function was not declared the same
way the rl_attempted_completion_function pointer was.
The only difference was a 'const char *' -vs- 'char *'
So convert it over.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The append_history function in lib readline appears to
not be universally available across all of the esoteric
platforms we may want to compile on. As such
provide a way to gracefully do nothing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove isis_vty.c and create three new files isis_vty_common.c,
isis_vty_fabricd.c and isis_vty_isisd.c which are built into both
daemons, only fabricd and only isisd, respectively.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Extend extract.pl so it can deal with the isis source code being
compiled twice, once for isisd and once for fabricd.
Add the fabricd node and client to vtysh.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
If a command returns a nonzero exit status and VTYSH has a corresponding
command, VTYSH will skip executing its own version. If this happens in a
command that changes CLI nodes we get node desynchronization.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add zlog_* function to log with a reference code
* Add ability to track reference cards for errors to ferr.[ch]
* Assign some reference code ranges
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The definition of the interface commands in vtysh.c were outdated.
Currently, all daemons that call if_cmd_init() will have the "no interface
IFNAME" command and the "[no] description" commands as well, so there's
no need to define exceptions for these commands anymore.
To fix this, make extract.pl parse the if.c file so that vtysh can get the
interface commands from there automatically. Only the "interface IFNAME
[vrf NAME]" must be kept in vtysh.c because it changes the vty node and
thus needs special treatment.
Finally, make pimd and pbrd display interface descriptions on "sh run"
when they are configured.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Only zebra and pimd call vrf_cmd_init(), so these are the only daemons
that should receive VRF commands from vtysh;
* "netns NAME" and "no netns NAME" are available only in zebra, write
custom DEFSHs in vtysh to make it aware of that;
* Remove the "no vrf NAME" definition from vtysh.c and expose the
original command to vtysh by converting the DEFUN_NOSH to a simple
DEFUN. This command doesn't change the vty node so there's no need to
special case it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Implement vty shell integration and allow `bfdd` to be configured
through FRR's vtysh.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If `ip igmp query-max-respone-time ` is specified allow it
to show up before `ip igmp query-interval ` since there
are order dependancies that may show up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
This is the start of separating out the static
handling code from zebra -> staticd. This will
help simplify the zebra code and isolate static
route handling to it's own code base.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The semantics for suppressing output received from daemons changed
slightly when pipe actions were introduced, causing raw autocomplete
output to be printed where it shouldn't have been.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When we are iterating through the hash, keep count of how many
we've called and if we have finished calling the hash->size
iterator times, then short-circuit and stop looping over
the entire array.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Move configure flag propagations out of user flags
* Use AC_SUBST to transfer flag values to Automake
* Set default AM_CFLAGS and AM_CPPFLAGS in common.am and change child
Makefiles to modify these base variables
* Add flag override to turn off all sanitizers when building clippy
* Remove LSAN suppressions blacklist as it's no longer needed
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
With a new version of clang 6.0, the compiler is detecting more
issues where we may be possibly be truncating the output string.
Fix by increasing the size of the output string to make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
New version of clang are detecting function parameters that we should
not be casting as such. Fix these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Fix potential NULL dereference
* Fix use of uninitialized value
* Fix leaking memory by not freeing regex_t
* Fix extra \n when using empty regex filter
* Clean up still-reachable hook memory
* Handle nonexistent pager
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rewrite pager implementation
* Replace fprintf() with vty_out()
* Modify vty_out() for better vtysh support
* Remove static global outputfile var
* Remove fp argument from many vtysh functions
* Add some docs for stuff along the way
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The fp pointer has already been dereferenced in all paths
leading to the test for non NULL. Since we never crash
we know it cannot be NULL.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If vtysh was instructed to perform line-by-line processing on the output
of a command executed against a daemon and this output, as received by
vtysh, was not terminated with a newline, vtysh could print contents of
memory to its output device.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Functionality to let vtysh attempt to reconnect to daemons when
connection is lost (e.g. crash or restart).
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
