Modify code to add JSON format output in show command
"show ipv6 ospf6 interface" with proper formating
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Modify code to add JSON format output in show command
"show ipv6 ospf6 interface traffic" with proper formating
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Modify code to add JSON format output in show command
"show ipv6 ospf6 redistribute" with proper formating
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Add a `enum zclient_send_status` for appropriate handling
of return codes from zclient_send_message. Touch all the places
where we handle this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The route_map_object_t was being used to track what protocol we were
being called against. But each protocol was only ever calling itself.
So we had a variable that was only ever being passed in from route_map_apply
that had to be carried against and everyone was testing if that variable
was for their own stack.
Clean up this route_map_object_t from the entire system. We should
speed some stuff up. Yes I know not a bunch but this will add up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
gcc 10 complains about some of our format specs, fix them. Use
atomic size_t in thread stats, to work around platform
differences.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
1. All the changes are related to handle ospf6 with different vrf.
2. The dependancy of global ospf6 is removed.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>
Signed-off-by: harios_niral <hari@niralnetworks.com>
Let's cleanup the ospf6_sendmsg api and not pass in a pointer
to the ifindex to use. It's an integer.
Also remove the assert(*ifindex); We never use ifindex of 0
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Create appropriate accessor functions for the rn->lock
data. We should be accessing this data through accessor
functions since it is private data to the data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The code pattern:
for (ALL_LSDB(lsdb, lsa)) {
remove_lsa(lsa)
}
has a use after free in ALL_LSDB, since we ask for the next pointer,
after it has been freed.
Modify the code such that we grab the next pointer before we can
possibly free it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The normal ospf6_lsa_lock call should return the pointer
to the lock data structure we are holding. This is the
normal pattern for locking a data structure in FRR.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
ospf6_network.h needs ospf6_top.h to be included
first.
This makes newer versions of gcc much much happier.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. The socket() call is changed to vrf_socket().
2. The ospf6 instance creation api added.
3. The global socket fd is replaced with ospf6->fd.
4. All dependency of the global socket is resolved.
5. Added the ospf6 receive timer in the global structure.
6. Performed the thread off on receive timer when we do "no router ospf6".
Co-authored-by: harios <hari@niralnetworks.com>
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
Issue: When ospfv3 is configured on interface between routers in different network,
the intra area route for the remote connected prefix is not installed in ospf
route table and zebra
Fix: When the advertising router is directly connected but in different network
the interface lookup in the intra area lsa processing does not provide
the matching interface and valid nexthop. Therefore the nexthop is
copied from the link state entry which contains valid
ifindex required for installing the route.
Signed-off-by: kssoman <somanks@gmail.com>
When receiving old copies (e.g. originated before the local ospf6d was
restarted) of supposedly self-originated LSAs which we previously tried to
flush from the network (by setting them to MaxAge), neither flood them nor
add them to our LSDB. Instead, keep the MaxAge version until we actually
(re-)originate them.
Possible fix for #7030. Testcase in #7168
(tests/topotests/ospf6-dr-no-netlsa-bug7030).
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
1. Removed the VRF_DEFAULT dependency from ospf6d.
2. The dependency on show command still exist
will be fixed when the ospf6 master is available.
Co-authored-by: Harios <hari@niralnetworks.com>
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
The ospf6 "interface <blah> area <x>" command only allows the area to
be specified in the ipv4 address format, whereas the show run command
always shows it in the format in which the area was created. This causes
the frr-reload script to be unable to remove ospfv3 interfaces when the
area was created in decimal format. The solution is to allow both formats
to be configured as they can be for other area commands.
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
BFD profiles can now be used on the interface level like this:
interface eth1
ip router isis 1
isis bfd
isis bfd profile default
Here the 'default' profile needs to be specified as usual in the
bfdd configuration.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
This reverts commit 0f9f74baeb.
This commit was causing crashes and the goal of this commit
was to make coverity sanity happy. I'd rather have coverity
sad and not have ospfv3 crash
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that when an a previously advertised redistributed
route should be withdrawn based on a prefix-list change or route-map
deletion, the external LSAs would remain in the database and not be
withdrawn from peers. This fix does the withdraw when the prefix-list
is changed or route-map is deleted.
Ticket: CM-28944
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
ospf6_lsa_unlock may free the lsa data structure as such
we cannot use the passed in data structure after freeing it.
Provide a mechanism to know if the data has been freed
using the same usage patterns of other _unlock functions
in FRR.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Processing loop uncovered when there are multiple ABRs also
acting as ASBRs into the same area in ospf6. The problem
was that when looking thru the list of Inter-area router
entries, if the current entry being processed matched, it
still merged next-hops and re-initiated the process. In
this fix, if the route/path matches and the next-hops also
match, there is no need to re-initiate the examine process.
Ticket: CM-28900
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
... Oops ...
(for context, the defaults code originally didn't have a dedicated
"bool" variant and just used long for bools... I derp'd this when
adding bool as a separate case :( )
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
We are seeing this crash:
New LWP 7673]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/ospf6d -d -F datacenter -M snmp -A ::1'.
Program terminated with signal SIGABRT, Aborted.
(gdb) bt
vtysh=vtysh@entry=0) at lib/command.c:1288
(gdb)
The command entered is `debug ospf6 lsa inter-router examin`. Code
inspection leads us to the fact that FRR is declaring the data as
const but we are attempting to modify it, causing the crash.
Remvoe the const of this set/get and let things work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The vrrpd one conflicts with the standalone vrrpd package; also we're
installing daemons to /usr/lib/frr on some systems so they're not on
PATH.
Signed-off-by: David Lamparter <equinox@diac24.net>
Some preprocessor constants converted to enums to make the names usable
in the preprocessor.
v2: better isolation between core and vty code to make future northbound
conversion easier.
Signed-off-by: David Lamparter <equinox@diac24.net>
Scenarios where this code change is required:
1. BFD is un-configured from BGP at remote end.
Neighbour BFD sends ADMIN_DOWN state, but BFD on local side will send
DOWN to BGP, resulting in BGP session DOWN.
Removing BFD session administratively shouldn't bring DOWN BGP session
at local or remote.
2. BFD is un-configured from BGP or shutdown locally.
BFD will send state DOWN to BGP resulting in BGP session DOWN.
(This is akin to saying do not use BFD for BGP)
Removing BFD session administratively shouldn't bring DOWN BGP session at
local or remote.
Signed-off-by: Sayed Mohd Saquib sayed.saquib@broadcom.com
the for (ALL_LSDB...) macro was iterating over lsa,
when lsa had just been freed in these functions.
Remove the macro and make the adjustments saving lsa_next
before the free.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If the interface doesn't exist in system, we'll default to broadcast and
then later not change that when the interface comes up. Explicitly
track whether the user configured the type and properly auto-set it if
they didn't.
Fixes: #3930Fixes: #4873
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If the user configured an interface to be in a particular mode, we need
to be consistent about that. No looking at if_is_pointopoint() or
if_is_broadcast().
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
We can't skip reading interface state if there's no area yet, we'll be
missing information later when the interface is configured.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
User pass the string match large-community 1 exact-match from CLI.
Now route map lib has got the string as "1 exact-match". It passes the string
to call back for compilation. BGP will parse this string and came to know
that for "1" it has to do exact match. Routemap lib has to save "1" in it’s
dependency table. Here routemap is saving this as a “1 exact-match”
which is wrong. The solution is used the compiled data.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Conver these functions:
route_map_add_match
route_map_delete_match
route_map_add_set
route_map_delete_set
To return the `enum rmap_compile_rets` and ensure all functions
that use this code handle all the enumerated possible returns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
State1:
If match cmd returns RMAP_MATCH then, keep existing behaviour.
If routemap type is PERMIT, execute set cmds or call cmds if applicable,
otherwise PERMIT!
Else If routemap type is DENY, we DENYMATCH right away
State2:
If match cmd returns RMAP_NOMATCH, continue on to next route-map. If there
are no other rules or if all the rules return RMAP_NOMATCH, return DENYMATCH
We require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Also, this rule should be applicable for routes with VNI label only, and
not for routes without labels. For example, type 3 and type 4 EVPN routes
do not have labels, so, this match cmd should let them through.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
As a result we have a 3rd state:
State3:
If match cmd returned RMAP_NOOP
Then, proceed to other route-map, otherwise if there are no more
rules or if all the rules return RMAP_NOOP, then, return RMAP_PERMITMATCH.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf pointer is used as reference when calling if_get_by_name() function.
this will permit to create interfaces with an unknown vrf_id, since it
is only necessary to get the vrf structure to store the interfaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
Action: Apply route-map match and return the result (RMAP_MATCH/RMAP_NOMATCH)
State1: Receveived RMAP_MATCH
THEN: If Routemap type is PERMIT, execute other rules if applicable,
otherwise we PERMIT!
Else: If Routemap type is DENY, we DENYMATCH right away
State2: Received RMAP_NOMATCH, continue on to next route-map, otherwise,
return DENYMATCH by default if nothing matched.
With reference to PR 4078 (https://github.com/FRRouting/frr/pull/4078),
we require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP (or another enum) to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
Question: Do we repurpose an existing enum RMAP_OKAY or RMAP_ERROR
as the 3rd state (or create a new enum like RMAP_NOOP)?
RMAP_OKAY and RMAP_ERROR are used to return the result of set cmd.
We chose to go with RMAP_NOOP (but open to ideas),
as a way to bypass the rmap filter
As a result we have a 3rd state:
State3: Received RMAP_NOOP
Then, proceed to other route-map, otherwise return RMAP_PERMITMATCH by default.
Signed-off-by:Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
bfd cbit is a value carried out in bfd messages, that permit to keep or
not, the independence between control plane and dataplane. In other
words, while most of the cases plan to flush entries, when bfd goes
down, there are some cases where that bfd event should be ignored. this
is the case with non stop forwarding mechanisms where entries may be
kept. this is the case for BGP, when graceful restart capability is
used. If BFD event down happens, and bgp is in graceful restart mode, it
is wished to ignore the BFD event while waiting for the remote router to
restart.
The changes take into account the following:
- add a config flag across zebra layer so that daemon can set or not the
cbit capability.
- ability for daemons to read the remote bfd capability associated to a bfd
notification.
- in bfdd, according to the value, the cbit value is set
- in bfdd, the received value is retrived and stored in the bfd session
context.
- by default, the local cbit announced to remote is set to 1 while
preservation of the local path is not set.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The route_map_event_hook callback was passing the `route_map_event_t`
to each individual interested party. No-one is ever using this data
so let's cut to the chase a bit and remove the pass through of data.
This is considered ok in that the routemap.c code came this way
originally and after 15+ years no-one is using this functionality.
Nor do I see any `easy` way to do anything useful with this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vrf_id parameter is added to the api of bfd_client_sendmsg().
this permits being registered to bfd from a separate vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
As the previous commit, this replaces ospf6d's pqueue_* usage in SPF
calculations with a DECLARE_SKIPLIST_* skiplist.
Signed-off-by: David Lamparter <equinox@diac24.net>
The ospf6_route_get_first_nh_index function call calls
listhead which returns a (listnode *) but we are casting
it to a (struct ospf6_nexthop *) and away we go.
Fixes: #4142
Found By: Kwind
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The rib process of handling routes has been unified a bit more
and as a result v6 LL routes are now showing up as a result
of a `redistribute connected`. Doing anything with these
routes is a policy decision that should be enforced by the
individual routing daemons not by zebra. As such add a bit
of code to isisd, ripngd and opsf6d to handle them. The bgp daemon
already handles this situation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
there are some events where the list of interfaces per area should be
reviewed due to an interface is being removed. This fix avoids having
some memory leak.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Made changes and updated the routemap applied
counter in the following flows.
1.Increment the routemap applied counter when route map
attached to a redistribution list.
The counter will be updated if the routemap exists.
2.Decrement when route map removed / modified from a
redistribution list.
3.Increment/decrement when route map create/delete
callback triggered.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
Avoid a IPv6 multicast group join race by delaying the group install
before processing all event queue.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When using the timer to set the socket multicast options, keep track
of the thread pointer. If we lose the thread reference we might have
situations where multicast is enabled when it should be disabled and
vice versa.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Some daemons like ospfd and isisd have the ability to advertise a
default route to their peers only if one exists in the RIB. This
is what the "default-information originate" commands do when used
without the "always" parameter.
For that to work, these daemons use the ZEBRA_REDISTRIBUTE_DEFAULT_ADD
message to request default route information to zebra. The problem
is that this message didn't have an AFI parameter, so a default route
from any address-family would satisfy the requests from both daemons
(e.g. ::/0 would trigger ospfd to advertise a default route to its
peers, and 0.0.0.0/0 would trigger isisd to advertise a default route
to its IPv6 peers).
Fix this by adding an AFI parameter to the
ZEBRA_REDISTRIBUTE_DEFAULT_{ADD,DELETE} messages and making the
corresponding code changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
cf. https://wiki.debian.org/NonFreeIETFDocuments
These MIBs were in our git purely for documentation purposes, they are
not installed and not needed for building SNMP support.
Signed-off-by: David Lamparter <equinox@diac24.net>
ABR summary should contain best intra prefix LSA.
There might be a case where intra-prefix route with different
cost from different advertising router present, summary
advertisement should only consider best intra-prefix route.
A route which is marked for remove, while purging the route's
ABR summary LSA also remove summary route from the summary
table.
Ticket:CM-22665
Testing Done:
Validate on ABR topology, intra-prefix route with
different cost, a higher cost intra-prefix route skip from sending
ABR summary LSA.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
it was not possible to configure per area identifier under decimal
format some ospf6 area options. this is the case of filter list, or
export-list.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The frr-interface YANG module models interfaces using a YANG list keyed
by the interface name and the interface VRF. Interfaces can't be keyed
only by their name since interface names might not be globally unique
when the netns VRF backend is in use. When using the VRF-Lite backend,
however, interface names *must* be globally unique. In this case, we need
to validate the uniqueness of interface names inside the appropriate
northbound callback since this constraint can't be expressed in the
YANG language. We must also ensure that only inactive interfaces can be
removed, among other things we need to validate in the northbound layer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce frr-interface.yang, which defines a model for managing FRR
interfaces.
Update the 'frr_yang_module_info' array of all daemons that will
implement this module.
Add automatically generated stub callbacks in if.c. These callbacks will
be implemented in the following commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR_DAEMON_INFO should now contain an array of 'frr_yang_module_info'
structures describing the YANG modules implemented by the daemon.
This array will be used by frr_init() function to load all YANG modules
and initialize the northbound callbacks during the daemon initialization.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We had a variety of issues with sorted list compare functions.
This commit identifies and fixes these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use ospf6_prefix_same for comparing two exact same prefix
to determine ECMP for a route.
ospf6_route_cmp expects two different prefix rather
being exactly same.
Ticket:CM-22630
Testing Done:
performed ECMP of intra network prefix route via
sending same route via different available
ospf6 paths.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The dead code has been disabled with '#if 0', in a similar way to other
disabled logs in the same function.
Signed-off-by: F. Aragon <paco@voltanet.io>
Issue: # https://github.com/FRRouting/frr/issues/1836
Issue 1: if the router ospf current configuration is "area 0.0.0.2
range 1.0.0.0/24 cost 23" and user try to configure "area 0.0.0.2
range 1.0.0.0/24 not-advertise", the existing o/p is "area 0.0.0.2
range 1.0.0.0/24 cost 23 not-advertise". The keywords "not-advertise"
& "cost" are multually exclusive, so they should not come together.
The vice versa way configuration is working fine.
Fix: When ospf area range "not-advertise", the cost should be initialized
to OSPF_AREA_RANGE_COST_UNSPEC.
Issue 2: if the router ospf current configuration "area 0.0.0.2 range
1.0.0.0/24 substitute 2.0.0.0/24" and user try to configure "area 0.0.0.2
range 1.0.0.0/24 not-advertise" the existing o/p is "area 0.0.0.2 range
1.0.0.0/24 not-advertise substitute 2.0.0.0/24". The keywords
"not-advertise" & "substiture" are multually exclusive, so they should
not come together. The vice versa way configuration is working fine.
Fix: When ospf area range "not-advertise" is configured,
ospf_area_range_substitute_unset() should be get called.
Issue 3: if the router ospf6 current configuration is "area 0.0.0.2
range 2001::/64 cost 23" and user try to configure "area 0.0.0.2 range
2001::/64 advertise", the existing o/p is area 0.0.0.2 range 2001::/64.
The keyword "cost 23" disappears.
Fix: When ospf area range "advertise" is configured and the range is not
NULL, the cost should not be modified.
Signed-off-by: Sarita Patra <saritap@vmware.com>
