Add more details to these logs to help make it easier to determine why
ospf6 adjacency is not coming up. Also make these logs show up without
having to turn on debug logging, again making it easier to debug the
misconfiguration.
Signed-off-by: Lynne Morrison <lynne@voltaio.net>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
Issue: When a path in the inter area ecmp route is deleted, the route is removed
Fix: The fix is to remove the specific path from the inter area route using
ospf6_abr_old_route_remove() when abr route entry is not found.
In the function ospf6_abr_old_route_remove() the path to be removed needs
to match adv router and link state ID
Fixed memory leak in ospf6_intra_prefix_update_route_origin() caused by
route node lock not getting released.
Signed-off-by: kssoman <somanks@gmail.com>
Valgrind reports:
2437395-==2437395== Invalid read of size 8
2437395:==2437395== at 0x40B610: ospf6_asbr_update_route_ecmp_path (ospf6_asbr.c:327)
2437395-==2437395== by 0x40BC7C: ospf6_asbr_lsa_add (ospf6_asbr.c:544)
2437395-==2437395== by 0x40C5DF: ospf6_asbr_lsentry_add (ospf6_asbr.c:829)
2437395-==2437395== by 0x42D88D: ospf6_top_brouter_hook_add (ospf6_top.c:185)
2437395-==2437395== by 0x4188E3: ospf6_intra_brouter_calculation (ospf6_intra.c:2320)
2437395-==2437395== by 0x42C624: ospf6_spf_calculation_thread (ospf6_spf.c:638)
2437395-==2437395== by 0x4904B7E: thread_call (thread.c:1681)
2437395-==2437395== by 0x48CAA27: frr_run (libfrr.c:1126)
2437395-==2437395== by 0x40AF43: main (ospf6_main.c:232)
2437395-==2437395== Address 0x5c668a8 is 24 bytes inside a block of size 256 free'd
2437395:==2437395== at 0x48399AB: free (vg_replace_malloc.c:538)
2437395-==2437395== by 0x429027: ospf6_route_delete (ospf6_route.c:419)
2437395-==2437395== by 0x429027: ospf6_route_unlock (ospf6_route.c:460)
2437395-==2437395== by 0x429027: ospf6_route_remove (ospf6_route.c:887)
2437395-==2437395== by 0x40B343: ospf6_asbr_update_route_ecmp_path (ospf6_asbr.c:318)
2437395-==2437395== by 0x40BC7C: ospf6_asbr_lsa_add (ospf6_asbr.c:544)
2437395-==2437395== by 0x40C5DF: ospf6_asbr_lsentry_add (ospf6_asbr.c:829)
2437395-==2437395== by 0x42D88D: ospf6_top_brouter_hook_add (ospf6_top.c:185)
2437395-==2437395== by 0x4188E3: ospf6_intra_brouter_calculation (ospf6_intra.c:2320)
2437395-==2437395== by 0x42C624: ospf6_spf_calculation_thread (ospf6_spf.c:638)
2437395-==2437395== by 0x4904B7E: thread_call (thread.c:1681)
2437395-==2437395== by 0x48CAA27: frr_run (libfrr.c:1126)
2437395-==2437395== by 0x40AF43: main (ospf6_main.c:232)
2437395-==2437395== Block was alloc'd at
2437395:==2437395== at 0x483AB65: calloc (vg_replace_malloc.c:760)
2437395-==2437395== by 0x48D2A32: qcalloc (memory.c:115)
2437395-==2437395== by 0x427CE4: ospf6_route_create (ospf6_route.c:402)
2437395-==2437395== by 0x40BA8A: ospf6_asbr_lsa_add (ospf6_asbr.c:490)
2437395-==2437395== by 0x40C5DF: ospf6_asbr_lsentry_add (ospf6_asbr.c:829)
2437395-==2437395== by 0x42D88D: ospf6_top_brouter_hook_add (ospf6_top.c:185)
2437395-==2437395== by 0x4188E3: ospf6_intra_brouter_calculation (ospf6_intra.c:2320)
2437395-==2437395== by 0x42C624: ospf6_spf_calculation_thread (ospf6_spf.c:638)
2437395-==2437395== by 0x4904B7E: thread_call (thread.c:1681)
2437395-==2437395== by 0x48CAA27: frr_run (libfrr.c:1126)
2437395-==2437395== by 0x40AF43: main (ospf6_main.c:232)
ospfv3 loops through the ecmp routes to decide what to clean up. In some
situations the code free's up an existing route at the head of the list.
Cleaning the pointers in the list but never touching the original pointer.
In that case notice and update the old pointer.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Make return values for lh_get_prefix_str LSA handlers consistent, i.e.
return NULL in case of error without having written to the passed buffer
and non-NULL (address of buffer) if a string was written to the buffer.
Previously, it was possible in certain cases (bogus LSAs) to not initialize
(and 0-terminate) the buffer but still return non-NULL, causing the caller
to print random junk.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
Check whether full struct ospf6_router_lsdesc/ospf6_prefix is accessible
before accessing its contents. Previously, we only checked for the first
byte in ospf6_router_lsa_get_nbr_id() or not even that (due to an additional
off-by-one error) in ospf6_link_lsa_get_prefix_str() and
ospf6_intra_prefix_lsa_get_prefix_str().
Also check *before* accessing the first prefix instead of starting the
checks only at the 2nd prefix.
The previous code could cause out-of-bounds accesses with valid LSAs in case
of ospf6_link_lsa_get_prefix_str() and
ospf6_intra_prefix_lsa_get_prefix_str() and with specially crafted LSAs
(bad length field) in case of ospf6_router_lsa_get_nbr_id().
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
Modify code to add JSON format output in show command
"show ipv6 ospf6 interface prefix" with proper formating
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Modify code to add JSON format output in show command
"show ipv6 ospf6 route [<intra-area|inter-area|external-1|
external-2|X:X::X:X|X:X::X:X/M|detail|summary>]"
with proper formating
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
When removing ospfv3 from an interface that has been previously
put into wait state, there is a possible use after free of the
oi because the wait_timer could have been started for the interface.
This is because the wait_timer was not tracked by the interface
and we just created a thread for it without storing the thread
pointer.
Issue: #7932
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When redistributing multiple route types into ospfv3
the code must create a new array per route type into
the the json code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When the ospfv3 interface is disabled by the command "no interface <eth> area <area-id>
the linked interface prefixes does not get flushed
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Some prefixes were not shown in the link database
show command, due to issues with pointer calculation.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Some prefixes were not shown in the intra-prefix database
show command, due to issues with pointer calculation.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
1. Created new ospf6_redist structure.
2. Moved the 'route_map' structure from structure 'ospf6' to
structure 'ospf6_redist'.
3. Added new message type OSPF6_REDISTRIBUTE.
4. Added the placeholder for metric option in structure ospf6_redist
for redistribute.
5. Added few API's for route redistribute lookup, add & del.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
Compare the neighbour id string from the arguments to the router_id of
the neighbor. If equal then call the show function.
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Apparently the person who wrote this code was big into
cut-n-paste. Commit 710a61d57c
found the first instance, but upon code inspection this morning
it became evident that 2 other functions had the exact same
problem.
Fix. Note I have not cleaned up the cut-n-paste code for
two reasons: a) I'm chasing something else b) this code
has been fairly un-maintained for a very long time. No
need to start up now.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Modify code to add JSON format output in show command
"show ipv6 ospf6 interface" with proper formating
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Modify code to add JSON format output in show command
"show ipv6 ospf6 interface traffic" with proper formating
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Modify code to add JSON format output in show command
"show ipv6 ospf6 redistribute" with proper formating
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Add a `enum zclient_send_status` for appropriate handling
of return codes from zclient_send_message. Touch all the places
where we handle this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The route_map_object_t was being used to track what protocol we were
being called against. But each protocol was only ever calling itself.
So we had a variable that was only ever being passed in from route_map_apply
that had to be carried against and everyone was testing if that variable
was for their own stack.
Clean up this route_map_object_t from the entire system. We should
speed some stuff up. Yes I know not a bunch but this will add up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
gcc 10 complains about some of our format specs, fix them. Use
atomic size_t in thread stats, to work around platform
differences.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
1. All the changes are related to handle ospf6 with different vrf.
2. The dependancy of global ospf6 is removed.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>
Signed-off-by: harios_niral <hari@niralnetworks.com>
Let's cleanup the ospf6_sendmsg api and not pass in a pointer
to the ifindex to use. It's an integer.
Also remove the assert(*ifindex); We never use ifindex of 0
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Create appropriate accessor functions for the rn->lock
data. We should be accessing this data through accessor
functions since it is private data to the data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The code pattern:
for (ALL_LSDB(lsdb, lsa)) {
remove_lsa(lsa)
}
has a use after free in ALL_LSDB, since we ask for the next pointer,
after it has been freed.
Modify the code such that we grab the next pointer before we can
possibly free it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The normal ospf6_lsa_lock call should return the pointer
to the lock data structure we are holding. This is the
normal pattern for locking a data structure in FRR.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
ospf6_network.h needs ospf6_top.h to be included
first.
This makes newer versions of gcc much much happier.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. The socket() call is changed to vrf_socket().
2. The ospf6 instance creation api added.
3. The global socket fd is replaced with ospf6->fd.
4. All dependency of the global socket is resolved.
5. Added the ospf6 receive timer in the global structure.
6. Performed the thread off on receive timer when we do "no router ospf6".
Co-authored-by: harios <hari@niralnetworks.com>
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
Issue: When ospfv3 is configured on interface between routers in different network,
the intra area route for the remote connected prefix is not installed in ospf
route table and zebra
Fix: When the advertising router is directly connected but in different network
the interface lookup in the intra area lsa processing does not provide
the matching interface and valid nexthop. Therefore the nexthop is
copied from the link state entry which contains valid
ifindex required for installing the route.
Signed-off-by: kssoman <somanks@gmail.com>
When receiving old copies (e.g. originated before the local ospf6d was
restarted) of supposedly self-originated LSAs which we previously tried to
flush from the network (by setting them to MaxAge), neither flood them nor
add them to our LSDB. Instead, keep the MaxAge version until we actually
(re-)originate them.
Possible fix for #7030. Testcase in #7168
(tests/topotests/ospf6-dr-no-netlsa-bug7030).
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
1. Removed the VRF_DEFAULT dependency from ospf6d.
2. The dependency on show command still exist
will be fixed when the ospf6 master is available.
Co-authored-by: Harios <hari@niralnetworks.com>
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
The ospf6 "interface <blah> area <x>" command only allows the area to
be specified in the ipv4 address format, whereas the show run command
always shows it in the format in which the area was created. This causes
the frr-reload script to be unable to remove ospfv3 interfaces when the
area was created in decimal format. The solution is to allow both formats
to be configured as they can be for other area commands.
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
BFD profiles can now be used on the interface level like this:
interface eth1
ip router isis 1
isis bfd
isis bfd profile default
Here the 'default' profile needs to be specified as usual in the
bfdd configuration.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
This reverts commit 0f9f74baeb.
This commit was causing crashes and the goal of this commit
was to make coverity sanity happy. I'd rather have coverity
sad and not have ospfv3 crash
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that when an a previously advertised redistributed
route should be withdrawn based on a prefix-list change or route-map
deletion, the external LSAs would remain in the database and not be
withdrawn from peers. This fix does the withdraw when the prefix-list
is changed or route-map is deleted.
Ticket: CM-28944
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
ospf6_lsa_unlock may free the lsa data structure as such
we cannot use the passed in data structure after freeing it.
Provide a mechanism to know if the data has been freed
using the same usage patterns of other _unlock functions
in FRR.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
