isis_tlvs.c would fail at multiple places if incorrect TLVs were
received causing stream assertion violations.
This patch fixes the issues by adding missing length checks, missing
consumed length updates and handling malformed Segment Routing subTLVs.
Signed-off-by: Juraj Vijtiuk <juraj.vijtiuk@sartura.hr>
Small adjustments by Igor Ryzhov:
- fix incorrect replacement of srgb by srlb on lines 3052 and 3054
- add length check for ISIS_SUBTLV_ALGORITHM
- fix conflict in fuzzing data during rebase
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 9ba865f54d)
Test the ability to use the following configure command with a Y value:
no neighbor X.X.X.X maximum-prefix-out Y
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Introduces a topotest to validate proper AS-Path manipulation when using
"neighbor ... remove-private-AS".
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Opaque data takes up a lot of memory when there are a lot of routes on
the box. Given that this is just a cosmetic info, I propose to disable
it by default to not shock people who start using FRR for the first time
or upgrades from an old version.
Fixes#10101.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
VRF name should not be printed in the config since 574445ec. The update
was done for NB config output but I missed it for regular vty output.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The current maximum-prefix-out topo-test starts a configuration with a
maximum-prefix-out.
Test the application of new maximum-prefix-out value without clearing
the neighbor.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Redistribution for ospf with instance id's using instance id's
was incorrect. Add some small tests to make sure it catches the
issues and we don't regress.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The test case test_PIM_hello_tx_rx_p1 is failing randomly because
sometimes the hello packet is received and sometimes not received while getting
the stats data.
When the hello packet is received HelloRx gets incremented to 1 and then
shutdown of the interface is executed which resets the stats to 0
and again when "no shutdown" of the interface is done, the stats get incremented to 1.
The test case checks after "no shutdown" of the interface whether the stats is incremented
but in this case although the stats got incremented the before and after value is same.
Hence the test case failed.
Adding correct expectations in the test case.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Adding an `s` after these printfrr specifiers replaces 0.0.0.0 / :: in
the output with a star (`*`). This is primarily intended for use with
multicast, e.g. to print `(*,G)`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since this is only used in very few places, moving it out of the way is
reasonable. (`%pSG` will be pim_sgaddr)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The test is doing this:
a) gather interface data about packets sent
b) shut interface
c) no shut interface
d) gather interface data about packets sent
e) compare a to d and fail if packets sent/received has not incremented
The problem is, of course, that under heavy system load insufficient time
might not have passed for packets to be sent between c and d. Add up to
35 seconds of looking for packet data being incremented else heavily
loaded systems may never show that data is being sent.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
verify_pim_interface_traffic *fetches* the pim
traffic data. Rename the function to what it
actually does
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The nhrp_topo test sets up some infrastructure and
was displaying the commands it was outputting
incorrectly. Fix this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Using with LLGR, this should be allowed setting GR restart-time timer to 0,
to immediately start LLGR timers.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The following subcodes are defined for the Cease NOTIFICATION
message:
Subcode Symbolic Name
1 Maximum Number of Prefixes Reached
2 Administrative Shutdown
3 Peer De-configured
4 Administrative Reset
5 Connection Rejected
6 Other Configuration Change
7 Connection Collision Resolution
8 Out of Resources
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Currently, it is possible to rename the default VRF either by passing
`-o` option to zebra or by creating a file in `/var/run/netns` and
binding it to `/proc/self/ns/net`.
In both cases, only zebra knows about the rename and other daemons learn
about it only after they connect to zebra. This is a problem, because
daemons may read their config before they connect to zebra. To handle
this rename after the config is read, we have some special code in every
single daemon, which is not very bad but not desirable in my opinion.
But things are getting worse when we need to handle this in northbound
layer as we have to manually rewrite the config nodes. This approach is
already hacky, but still works as every daemon handles its own NB
structures. But it is completely incompatible with the central
management daemon architecture we are aiming for, as mgmtd doesn't even
have a connection with zebra to learn from it. And it shouldn't have it,
because operational state changes should never affect configuration.
To solve the problem and simplify the code, I propose to expand the `-o`
option to all daemons. By using the startup option, we let daemons know
about the rename before they read their configs so we don't need any
special code to deal with it. There's an easy way to pass the option to
all daemons by using `frr_global_options` variable.
Unfortunately, the second way of renaming by creating a file in
`/var/run/netns` is incompatible with the new mgmtd architecture.
Theoretically, we could force daemons to read their configs only after
they connect to zebra, but it means adding even more code to handle a
very specific use-case. And anyway this won't work for mgmtd as it
doesn't have a connection with zebra. So I had to remove this option.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently the Wait for Install code ( bgp_suppress_fib ) does
not properly handle two states from zebra: ROUTE_INSTALL_FAILED
and BETTER_ADMIN_DISTANCE_WON. Pre this change the WFI code
would just never notify our peers about a route install failure
but more is needed. In the ROUTE_INSTALL_FAILED and the
BETTER_ADMIN_DISTANCE_WON we need to notify our peers with
a withdrawal about the route, else we will continue to
draw traffic to us when we cannot legally do so.
Why is this needed? In either case imagine that we've already
received a bgp route, installed it and sent to our peers.
In the Better admin distance won case, say a static route is installed
at this point in time we must stop advertising the route through
us since we are not installed. As such a withdrawal must be sent.
In the ROUTE_INSTALL_FAILED case, the code was not properly handling
the situation where we have Route A, it was successfully installed
and then we received a update to Route A that was attempted to be
installed but failed. In this case we also need to send a withdrawal
Finally update the bgp_suppress_fib topotest to test both of these
situations.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There still existed chances that best path consideration
has not taken place for both bgp_l3vpn_to_bgp_vrf and
bgp_instance_del_test ( since they both used the same
check_routes.py scripting ). Add some more checks
to ensure that we have all the data. Prior to this
change I could see one of these two tests failing
every 2-3 runs on my test system. I am not seeing
this anymore after ~5 complete test runs.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
OSPF when converging will choose a DR / Backup DR based upon
who has already come up. Irrelevant of priority. As such if
under system load OSPF comes up first and elects a DR that under
normal circumstances not be the elected one due to priority
OSPF does not go back through and re-elect to keep the system
stable in this case. Tests are experiencing this:
unet> r0 show ip ospf neigh
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
100.1.1.1 99 Full/Backup 4m14s 3.780s 10.0.1.2 r0-s1-eth0:10.0.1.1 0 0 0
100.1.1.2 0 Full/DROther 4m14s 3.848s 10.0.1.3 r0-s1-eth0:10.0.1.1 0 0 0
100.1.1.3 0 Full/DROther 4m14s 3.912s 10.0.1.4 r0-s1-eth0:10.0.1.1 0 0 0
unet> r1 show ip ospf neigh
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
100.1.1.0 98 Full/DR 4m15s 3.011s 10.0.1.1 r1-s1-eth1:10.0.1.2 0 0 0
100.1.1.2 0 Full/DROther 4m19s 3.124s 10.0.1.3 r1-s1-eth1:10.0.1.2 0 0 0
100.1.1.3 0 Full/DROther 4m19s 3.188s 10.0.1.4 r1-s1-eth1:10.0.1.2 0 0 0
unet> r2 show ip ospf neigh
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
100.1.1.0 98 Full/DR 4m27s 3.483s 10.0.1.1 r2-s1-eth0:10.0.1.3 0 0 0
100.1.1.1 99 Full/Backup 4m32s 3.527s 10.0.1.2 r2-s1-eth0:10.0.1.3 0 0 0
100.1.1.3 0 2-Way/DROther 4m32s 3.660s 10.0.1.4 r2-s1-eth0:10.0.1.3 0 0 0
unet> r3 show ip ospf neigh
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
100.1.1.0 98 Full/DR 4m55s 3.786s 10.0.1.1 r3-s1-eth1:10.0.1.4 0 0 0
100.1.1.1 99 Full/Backup 4m55s 3.829s 10.0.1.2 r3-s1-eth1:10.0.1.4 0 0 0
100.1.1.2 0 2-Way/DROther 4m54s 3.897s 10.0.1.3 r3-s1-eth1:10.0.1.4 0 0 0
Modify the test to do a clear to enforce the order we are specifically looking for.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
