Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
Adds mulitple test scenarios for prefix-lists in bgp. Verfication
API for prefix-lits
Also adds description for bgp-basic test suite
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
Adding verify and config apis for bgp timer testcase
Adding verify and config apis for changing ASN to 4 bytes
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
Adding mulitple methods to form BGP configuration and other
helper methods.
If "bgp" is given in JSON the configuration will be created
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
Adds method to load configuration on the router. Save configuration
for resetting.
Adds method for configuring interfaces ip address on router.
Adds logdir and other pytest.ini option
Adding in the command `show log-filter` made `show log`
ambiguous. Change the checkRouterRunning() test to do
full `show logging` so it works again.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The `bgp multiple-instance` command has been deprecated and
removed. Finish off this by removing it from topotests too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is mostly relevant for Solaris, where config.h sets up some #define
that affect overall header behaviour, so it needs to be before anything
else.
Signed-off-by: David Lamparter <equinox@diac24.net>
This version of container_of() should work on C++, by ditching the
unavailable builtins (at the cost of no longer checking for "const"
violations.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a common function to retrieve and canonicalize
'show ipv6 route' output for use in topotests. Use that in
the test_ospf6_topo1 test; update the corresponding 'expected'
results files to match the lib function.
Replace some 'print' with 'logger' statements in that test also.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
bgp ipv6 implies that routing advertisements be available for all vrf.
in the case of the vrf backend is network namespace, this should be
tested too. in addition to configure addresses per interface on a
separate vrf, the test also checks for BGP connectivity.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
bgp ipv6 implies that routing advertisements be available for all vrf.
in the case of the vrf backend is network namespace, this should be
tested too. in addition to configure addresses per interface on a
separate vrf, the test also checks for BGP connectivity.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Migrate/upgrade the ospf6-topo1 topotest to the topogen
framework. The framework supports improved logging, among
other things. Also add a couple of zebra debugs.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add 'no log commands' cli and at the same time add a
--command-log-always to the daemon startup cli.
If --command-log-always is specified then all commands are
auto-logged and the 'no log commands' form of the command
is now ignored.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Now, whenever a new header is added to libfrr, this test needs to
be updated manually (unless we automate this somehow in the future).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is necessary to avoid a name collision with std::for_each
from C++.
Fixes the compilation of the gRPC northbound module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We already show this information in `show [ip] bgp <prefix`, thus why don't
show it in global output. It's very handy when using at scale and to see
the whole picture instead of resolving neighbor manually.
It will show FQDN only if `bgp default show-hostname` is toggled.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The unsorted datastructures (LIST, DLIST) had no test before this. Also
add a hash check (mostly to make testing the unsorted lists easier.)
Signed-off-by: David Lamparter <equinox@diac24.net>
The hash table test was previously (intentionally) using a bad hash
function to test the code in the face of hash collisions. Add a test
with a good hash function to see some performance numbers.
Signed-off-by: David Lamparter <equinox@diac24.net>
It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
this test simulates the case where r1 keeps staled entries of r2,
because r2 is a 'non stop forwarding' device. For instance, r2 restarts
to be upgraded, then r1 keeps the entries, thus avoiding to flush
entries in the dataplane. Here, BFD is used, and the bgp
check-control-plane-failure command is used to inform BGP that if BFD
goes down, this may be because remote peer is restarting, and this may
be necessary to keep the entries of remote.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Different versions of linux are assigned different interface
ifindexes. Mask that cabbage out.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
As of pytest 4.something, a pattern we were using in conftest.py
was deprecated. Also make a new-ish test script executable (all
the rest appear to be?)
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Historically, isisd has been carrying around its own red-black tree to
manage its LSP DB in. This replaces that with the newly-added
DECLARE_RBTREE_*. This allows completely removing the dict_* code.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since all of these list implementations provide almost the same API, we
can run and validate them against the same test code. 9 tests for the
price of one!
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These two are lock-free linked list implementations, the plain one is
primarily intended for queues while the sorted one is for general data
storage.
Signed-off-by: David Lamparter <equinox@diac24.net>
The tests are not coming up consistently on my test box. Add a bit of wait
time to test to allow normal bgp when the first attempt doesn't come up.
Especially since bgp timeouts are 120 seconds with non datacenter compiles.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Manually tested rather extensively in addition to included unit tests,
should work as intended.
NB: The OpenBSD futex() code is "future"; it's not actually in OpenBSD
(yet?) and thus untested.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When something goes wrong with this test, having these turned
on will help us debug zebra processing a bit better in the
future without having to modify anything else.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When using remove-private-AS together with local-as
aspath_remove_private_asns() is called before bgp_packet_attribute().
In this case, private AS will always appear in front of change_local_as.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Change the router log output to the previous folder so it doesn't get
erased when starting the old API (unbreaks command/output logging on
Topogen).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
`param.get` always evaluates the second argument and it was causing
two log directories being created for topologies using Topogen.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Move daemon configuration to appropriated files and use `json_cmp` to
assert the values we expect.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add code to send a S,G stream and make sure the RP see's it.
Add code to send a *,G report and make sure the RP see's it.
This is just some *very* basic functionality testing to
ensure that we don't break anything basic.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The topotests docker image has moved from frrouting/frr to
frrouting/topotests. Update accordingly.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
New BFD topology using IPv6 and multi hop peer to cover more daemon
features. This topology also tests BFD integration with BGP, OSPF and
OSPF6.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The "show bgp ipv6 summary" output displays incorrect number of peers count.
sonic# show bgp ipv6 summary
IPv6 Unicast Summary:
BGP router identifier 10.1.0.1, local AS number 65100 vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 5, using 103 KiB of memory
Peer groups 1, using 64 bytes of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
2003::1 4 65099 0 0 0 0 0 never Active
2088::1 4 65100 0 0 0 0 0 never Active
3021::2 4 65100 0 0 0 0 0 never Active
Total number of neighbors 3
sonic#
In the above output, the peers count displays as 5 but the actual peer count is 3, i.e.. 3 neighbors are activated in ipv6 unicast address family.
Displayed peer count (5) is the number of the neighbors activated in a BGP instance.
Fix : Now the peers count displays the number of neighbors activated per afi/safi.
After Fix:
sonic# show bgp ipv6 summary
IPv6 Unicast Summary:
BGP router identifier 10.1.0.1, local AS number 65100 vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 3, using 62 KiB of memory
Peer groups 1, using 64 bytes of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
2003::1 4 65099 0 0 0 0 0 never Active
2088::1 4 65100 0 0 0 0 0 never Active
3021::2 4 65100 0 0 0 0 0 never Active
Total number of neighbors 3
sonic#
Signed-off-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com>
Compiling an empty C file with most headers included and -Wc++-compat
gives us a build error if we introduce some stupid C++-incompatible
change.
While this won't catch everything, it's a good start.
Signed-off-by: David Lamparter <equinox@diac24.net>
This code just ensures that v4 and v6 routes are as expected
in the rib. While this test addition is not that complicated it would
have caught some issues while I was attempting to handle the
switchover to a different style of rib processing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On interface down do not delete the eigrp interface data
structure. Ensure that the address that we have setup the
eigrp data structure ontop of is what we are deleting.
Additionally add a test to show that this is no-longer
crashing eigrp. Future commits will further modify
this test to actually ensure that the eigrp topo is
updated correctly and the rib has the correct data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we schedule a packet for future handling, list the packet
type so that we can see what we are getting with debugs.
Also note which client and how many packets we received from that
client.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify EIGRP code to pass its used metric down to zebra.
Additionally update topotests to pass with these changes.
Fixes: #3703
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
When a interface based peer is setup and if it is part of a peer
group we should ignore this and just use the PEER_FLAG_CAPABILITY_ENHE
no matter what.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Waiting 10 seconds for bgp convergence makes no sense, especially
if the test system is under load and a node is started up before
the node it is connecting to is up. We should wait for the full
default of 120 seconds, plus a little time to ensure nothing is
screwed up too much.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the addition of FreeBSDRouter class that inherits from
class Router. At this point we do not do a whole lot. We
just come up on FreeBSD, lots of stuff that still needs to
be fixed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
As part of the class rework, move the linux specific config
into the LinuxRouter.config section instead of being in the
Router class.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the LinuxRouter code such that it inherits from the
Router class. This is setup work for (a) pulling out linux
specific config from class Router and (b) creating a FreebsdRouter
that inherits from class 'Router'.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The sharp daemon did not have any ability to be used in
topotests. Add some code to allow this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start abstraction of the module_present into module_present_linux and freebsd
To allow for multiple platforms that the topotests can be run on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the cleanup of diagnose_env to allow the running of topotests
on platforms besides linux.
So we split up diagnose_env into linux and freebsd variants.
At this point in time freebsd doesn't have any special code.
To be determined in the future.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A recent commit broke this functionality, so add a very basic
route leak vrf test.
router bgp 99 vrf DONNA
address-family ipv4 uni
redistribute connected
import vrf EVA
router bgp 99 vrf EVA
address-family ipv4 uni
redistribute connected
import vrf DONNA
Routes should be leaked between the two vrf's. Ensure that it does.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have set up automated builds for the topotest images at dockerhub.
Therefore, people don't need to perform a local build to run the
topotests on docker, but can use the image built by dockerhub.
As there is not much benefit in building locally, but the disadvantage
of weird errors if using an outdated image, change the topotests target
to always pull the most recent image from dockerhub.
Add an environment variable to disable this, e.g. for local development.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
YANG allows lists without keys for operational data, in which case
the list elements are uniquely identified using a positional index
(starting from one).
This commit does the following:
* Remove the need to implement the 'get_keys' and 'lookup_entry'
callbacks for keyless lists.
* Extend nb_oper_data_iter_list() so that it special-cases keyless
lists appropriately. Since both the CLI and the sysrepo plugin
use nb_oper_data_iterate() to fetch operational data, both these
northbound clients automatically gain the ability to understand
keyless lists without additional changes.
* Extend the confd plugin to special-case keyless lists as well. This
was a bit painful to implement given ConfD's clumsy API, but
keyless lists should work ok now.
* Update the "test_oper_data" unit test to test keyless YANG lists in
addition to regular lists.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These are causing random test failures when the host's domainname is
actually set to something (as opposed to empty/unset, which it is 99% of
times.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Confirmed commits allow the user to request an automatic rollback to
the previous configuration if the commit operation is not confirmed
within a number of minutes. This is particularly useful when the user
is accessing the CLI through the network (e.g. using SSH) and any
configuration change might cause an unexpected loss of connectivity
between the user and the managed device (e.g. misconfiguration of a
routing protocol). By using a confirmed commit, the user can rest
assured the connectivity will be restored after the given timeout
expires, avoiding the need to access the router physically to fix
the problem.
When "commit confirmed TIMEOUT" is used, a new "commit" command is
expected to confirm the previous commit before the given timeout
expires. If "commit confirmed TIMEOUT" is used while there's already
a confirmed-commit in progress, the confirmed-commit timeout is
reset to the new value.
In the current implementation, if other users perform commits while
there's a confirmed-commit in progress, all commits are rolled back
when the confirmed-commit timeout expires. It's recommended to use
the "configure exclusive" configuration mode to prevent unexpected
outcomes when using confirmed commits.
When an user exits from the configuration mode while there's a
confirmed-commit in progress, the commit is automatically rolled
back and the user is notified about it. In the future we might
want to prompt the user if he or she really wants to exit from the
configuration mode when there's a pending confirmed commit.
Needless to say, confirmed commit only work for configuration
commands converted to the new northbound model. vtysh support will
be implemented at a later time.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We call `modprobe -n` to check if mpls modules are available to be
loaded. We do this as normal user, to only ask for root permissions
if we are actually loading the module.
This breaks if `modprobe` is in `/sbin` and normal users don't have
sbin in path.
So add `/sbin` to the search path to work around this.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
If we mount the tests into the container from the host, we also
mount any `*.pyc` files with them, which will lead to issues
as the mount is done read-only to avoid any changes to the host.
Since the tests are now integrated and we already create a writeable
copy of the FRR tree, just use the tests from the FRR tree to avoid
this issue.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This commit adds a template for "show bgp ipv4/ipv6" display to include default local preference and local-AS O/P.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
Before this update, json_cmp_results which were formatted as strings
would not show the error mesage but just an object reference.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This reverts commit 659782730b.
Apparently, the build context is inferred from the Dockerfile path.
Yay for sensible documentation. :/
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
