Some ICC command-line options can cause confusion for other
compilers; test for ICC specifically, and only try to use those
options if ICC is being used.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Make the generate-support-bundle script and interactions more
python3-friendly, and use python3 explicitly.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
CR, NL and CRNL are all OK, but CRNL shouldn't get treated as 2
newlines (which causes an empty command to be executed => empty prompt
line.)
Signed-off-by: David Lamparter <equinox@diac24.net>
The FDs are in struct vty, and there's ->fd and ->wfd, which shouldn't
be confused. Passing vty_sock along separately just creates mixups.
Signed-off-by: David Lamparter <equinox@diac24.net>
The return code from smux_trap is never used. If we have
never used it after all this time. Remove the return from
the function.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The new bgp_mplsvpn_snmp.c code increments i and
never uses that value. Comment the code out
to make the clang SA analyzer happy. Shouldn't
be a problem since this code will never probably
be touched again(ha!).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Clang was complaining when running SA that the nhrpd_privs.change
function was null. It just does not fully understand how things
are setup. Add a assert to make it happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
```
(gdb) bt
0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
1 0x00007fe57ca4a42a in __GI_abort () at abort.c:89
2 0x00007fe57ddd1935 in core_handler (signo=6, siginfo=0x7ffc81067570, context=<optimized out>) at lib/sigevent.c:255
3 <signal handler called>
4 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
5 0x00007fe57ca4a42a in __GI_abort () at abort.c:89
6 0x00007fe57ddd1935 in core_handler (signo=11, siginfo=0x7ffc81067e30, context=<optimized out>) at lib/sigevent.c:255
7 <signal handler called>
8 0x000055a7b25b923f in bgp_path_info_to_ipv6_nexthop (ifindex=ifindex@entry=0x7ffc810683c0, path=<optimized out>, path=<optimized out>) at bgpd/bgp_zebra.c:909
9 0x000055a7b25bb2e5 in bgp_zebra_announce (dest=dest@entry=0x55a7b5239c10, p=p@entry=0x55a7b5239c10, info=info@entry=0x55a7b5239cd0, bgp=bgp@entry=0x55a7b518b090, afi=afi@entry=AFI_IP6, safi=safi@entry=SAFI_UNICAST) at bgpd/bgp_zebra.c:1358
10 0x000055a7b256af6a in bgp_process_main_one (bgp=0x55a7b518b090, dest=0x55a7b5239c10, afi=AFI_IP6, safi=SAFI_UNICAST) at bgpd/bgp_route.c:2918
11 0x000055a7b256b0ee in bgp_process_wq (wq=<optimized out>, data=0x55a7b5221800) at bgpd/bgp_route.c:3027
12 0x00007fe57ddea2e0 in work_queue_run (thread=0x7ffc8106cd60) at lib/workqueue.c:291
13 0x00007fe57dde0781 in thread_call (thread=thread@entry=0x7ffc8106cd60) at lib/thread.c:1684
14 0x00007fe57dda84b8 in frr_run (master=0x55a7b48aaf00) at lib/libfrr.c:1126
15 0x000055a7b250a7da in main (argc=<optimized out>, argv=<optimized out>) at bgpd/bgp_main.c:540
(gdb)
```
This crashes with configs like:
```
router bgp 65534
no bgp ebgp-requires-policy
no bgp network import-check
!
address-family ipv6 unicast
import vrf donatas <<<<<< Crashes when entering this command
exit-address-family
!
router bgp 65534 vrf donatas
no bgp ebgp-requires-policy
no bgp network import-check
neighbor fe80::c15a:ddab:1689:db86 remote-as 65025
neighbor fe80::c15a:ddab:1689:db86 interface eth2
neighbor fe80::c15a:ddab:1689:db86 update-source eth2
neighbor fe80::c15a:ddab:1689:db86 capability extended-nexthop
!
address-family ipv6 unicast
network 2a02:face::/32 <<<<<< Crashes due to static networks
neighbor fe80::c15a:ddab:1689:db86 activate
exit-address-family
!
```
Locally configured routes do not have peer->su_remote.
```
exit1-debian-9# show bgp ipv6 unicast
BGP table version is 3, local router ID is 192.168.100.1, vrf id 0
Default local pref 100, local AS 65534
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2a02🔤:/64 fe80::c15a:ddab:1689:db86@5<
0 65025 i
2a02:face::/32 ::@5< 0 32768 i
Displayed 2 routes and 2 total paths
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
When bgp registers for a nexthop that is not reachable due
to the nexthop pointing to a blackhole, bgp is never going
to be able to reach it when attempting to open a connection.
Broken behavior:
<show bgp nexthop>
192.168.161.204 valid [IGP metric 0], #paths 0, peer 192.168.161.204
blackhole
Last update: Thu Feb 11 09:46:10 2021
eva# show bgp ipv4 uni summ fail
BGP router identifier 10.10.3.11, local AS number 3235 vrf-id 0
BGP table version 40
RIB entries 78, using 14 KiB of memory
Peers 2, using 54 KiB of memory
Neighbor EstdCnt DropCnt ResetTime Reason
192.168.161.204 0 0 never Waiting for peer OPEN
The log file fills up with this type of message:
2021-02-09T18:53:11.653433+00:00 nq-sjc6c-cor-01 bgpd[6548]: can't connect to 24.51.27.241 fd 26 : Invalid argument
2021-02-09T18:53:21.654005+00:00 nq-sjc6c-cor-01 bgpd[6548]: can't connect to 24.51.27.241 fd 26 : Invalid argument
2021-02-09T18:53:31.654381+00:00 nq-sjc6c-cor-01 bgpd[6548]: can't connect to 24.51.27.241 fd 26 : Invalid argument
2021-02-09T18:53:41.654729+00:00 nq-sjc6c-cor-01 bgpd[6548]: can't connect to 24.51.27.241 fd 26 : Invalid argument
2021-02-09T18:53:51.655147+00:00 nq-sjc6c-cor-01 bgpd[6548]: can't connect to 24.51.27.241 fd 26 : Invalid argument
As that the connect to a blackhole is correctly rejected by the kernel
Fixed behavior:
eva# show bgp ipv4 uni summ
BGP router identifier 10.10.3.11, local AS number 3235 vrf-id 0
BGP table version 40
RIB entries 78, using 14 KiB of memory
Peers 2, using 54 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
annie(192.168.161.2) 4 64539 126264 39 0 0 0 00:01:36 38 40 N/A
192.168.161.178 4 0 0 0 0 0 0 never Active 0 N/A
Total number of neighbors 2
eva# show bgp ipv4 uni summ fail
BGP router identifier 10.10.3.11, local AS number 3235 vrf-id 0
BGP table version 40
RIB entries 78, using 14 KiB of memory
Peers 2, using 54 KiB of memory
Neighbor EstdCnt DropCnt ResetTime Reason
192.168.161.178 0 0 never Waiting for NHT
Total number of neighbors 2
eva# show bgp nexthop
Current BGP nexthop cache:
192.168.161.2 valid [IGP metric 0], #paths 38, peer 192.168.161.2
if enp39s0
Last update: Thu Feb 11 09:52:05 2021
192.168.161.131 valid [IGP metric 0], #paths 0, peer 192.168.161.131
if enp39s0
Last update: Thu Feb 11 09:52:05 2021
192.168.161.178 invalid, #paths 0, peer 192.168.161.178
Must be Connected
Last update: Thu Feb 11 09:53:37 2021
eva#
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Replaces some hard-coded function names with __func__,
adds some additional references to neighbor/interface,
and cleans up some debug strings to be more readable.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
When sending BMP messages for a status change event for a peer whose NHT
has failed, we were sending a Peer Down Reason Code of 1 (Local system
closed, NOTIFICATION follows) with no NOTIFICAION PDU (because there was
none). This is wrong. Also, the reason code of 1 is semantically off, it
should be 2 (Local system closed, FSM event follows).
This patch:
- adds definitions of all BGP FSM event codes per RFC4271
- changes the BMP reason code emitted when a peer changes state due to
NHT failure to 2 and encodes FSM event 18 (TcpConnectionFails)
- changes the catch-all case where we have not yet
implemented the appropriate BMP response to indicate reason code 2
with FSM event 0 (no relevant Event code is defined).
These changes ought to prevent the BMP session from being torn down due
to an improperly formatted message.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
The logging code writes log messages with a `\n` line ending, meanwhile
the VTY code switches it so you need `\r\n`...
And we don't flush the newline after executing a command either.
After this patch, starting daemons like `zebra/zebra -t` should provide
a nice development/debugging experience with a VTY open right there on
stdio and `log stdout` interspersed.
(This is already documented in the man pages, it just looked like sh*t
previously since the log messages didn't newline correctly.)
Signed-off-by: David Lamparter <equinox@diac24.net>
... in case the user does something like `zebra 3>logfile`. Also useful
for some module purposes, maybe even feeding config at some point in the
future.
Signed-off-by: David Lamparter <equinox@diac24.net>
This command doesn't rely on transactional CLI and works perfectly for
daemons converted to northbound configuration.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
- Rfc 8050 adds support for BGP NLRI that carry path identifiers. this commit adds that support to FRR
- Updated bgp_dump.h to include new sub-type values
- Updated bgp_dump.c to check for add_path af_caps in the peer struct.
- Updated bgp_dump.c to use the proper sub-type values upon detection of add-path af_caps
- Updated bgp_dump.c to properly dump the path_id wen present.
Signed-off-by: David Teach <dteach@routeviews.org>
'show bgp ipv[46] vpn neighbors ... advertised-routes' was displaying
empty output due to new command syntax using show_adj_routes() which
assumed each bgp_table was single-tier (not nested). This fixes that
assumption for safis with a two-tier bgp_table (SAFI_MPLS_VPN,
SAFI_ENCAP, and SAFI_EVPN).
Before:
ub18# show bgp ipv6 vpn neighbors 2001:db8:cafe::2 advertised-routes
ub18#
After:
ub20# show bgp ipv6 vpn neighbors 2001:db8:cafe::1 advertised-routes
BGP table version is 2, local router ID is 100.64.0.222, vrf id 0
Default local pref 100, local AS 1
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 30:30
*> 2::2/128 :: 0 100 32768 i
*> 2::22/128 :: 0 100 32768 i
Route Distinguisher: 33:33
*> 2::2/128 :: 0 100 32768 i
*> 2::22/128 :: 0 100 32768 i
Total number of prefixes 4
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Currently when deleting a neighbor from a peer-group:
no neighbor A.B.C.D peer-group FOO
We must specify FOO, while A.B.C.D is sufficient enough of an
identifier to know what to do.
Make PGNAME optional on this command and just delete the peer.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Issue #7926 hilight a race condition in Segment Routing processing.
The problem occurs when Router Information Opaque LSA is received late, in
particular after SPF run and after ospf_sr_nhlfe_update() was called. This
scenario is unfrequent and takes place due to a slow DR election.
In this particular case, SR Prefix are handle but not fully fill. In fact,
SRGB for the nexthop is not yet received and thus, output label could not
be computed.
When Router Information Opaque LSA is received and processed, if the
corresponding SR node is a direct neighbor of the self node, update_out_nhlfe()
is called against all SR nodes to adjust SR prefix if the next hop is the new
SR node. The function wrongly computes output label and configure a bad MPLS
LFIB entries.
Another way to hilight the problem is to change through CLI the SRGB of a node
and look to MPLS LFIB of direct neighbor, in particular those who announce
EXPLICIT NULL Prefix SID.
This patch correct the update_out_nhlfe() function by calling the appropriate
function (sr_prefix_out_label() instead of index2label()) to compute the output
label.
Some log debugs were adjusted and unused prefix route table was removed too.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Currently if the sysctl net.ipv4.raw_l3mdev_accept is 1, packets
destined to a specific vrf also end up being delivered to the default
vrf. We will see logs like this in ospf:
2021/02/10 21:17:05.245727 OSPF: ospf_recv_packet: fd 20(default) on interface 1265(swp1s1.26)
2021/02/10 21:17:05.245740 OSPF: Hello received from [9.9.36.12] via [swp1s1.26:200.254.26.13]
2021/02/10 21:17:05.245741 OSPF: src [200.254.26.14],
2021/02/10 21:17:05.245743 OSPF: dst [224.0.0.5]
2021/02/10 21:17:05.245769 OSPF: ospf_recv_packet: fd 45(vrf1036) on interface 1265(swp1s1.26)
2021/02/10 21:17:05.245774 OSPF: Hello received from [9.9.36.12] via [swp1s1.26:200.254.26.13]
2021/02/10 21:17:05.245775 OSPF: src [200.254.26.14],
2021/02/10 21:17:05.245777 OSPF: dst [224.0.0.5]
This really really makes ospf unhappy in the vrf we are running in.
I am approaching the problem by just dropping the packet if read in the
default vrf because of:
commit 0556fc33c7
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Fri Feb 1 11:54:59 2019 -0500
lib: Allow bgp to always create a listen socket for the vrf
Effectively if we have `router ospf vrf BLUE` but no ospf running
in the default vrf, we will not have a listener and that would
require a fundamental change in our approach to handle the ospf->fd
at a global level. I think this is less than ideal at the moment
but it will get us moving again and allow FRR to work with
a bunch of vrf's and ospf neighbors.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There are cases where nhrp wants to create a nhrp route to gre interface
with the nexthop which is the same the prefix. This is the case with
ipv6:
ipv6 route a:ff::ff:4/128 via a:ff::ff:4:/128 dev gre1
This route entry is false from zebra point of view, and to avoid that,
the nexthop is ignored in nhrp only if the prefix equals the nexthop.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
