When a ES-bond is in bypass state MACs learnt on it are linked to the
access port instead of the ES. When LACP converges on the bond it moves
out of bypass and the MACs previously learnt on it are flushed to force
a re-learn on new traffic.
Ticket: CM-31326
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When an ES-bond comes out of bypass FRR needs to flush the local MACs learnt
while the bond was in bypass. To do that efficiently local MACs are linked
to the dest-access port. This only happens if the access-port is in
LACP-bypass or if it is non-ES.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Feature overview:
=================
A 802.3ad bond can be setup to allow lacp-bypass. This is done to enable
servers to pxe boot without a LACP license i.e. allows the bond to go oper
up (with a single link) without LACP converging.
If an ES-bond is oper-up in an "LACP-bypass" state MH treats it as a non-ES
bond. This involves the following special handling -
1. If the bond is in a bypass-state the associated ES is placed in a
bypass state.
2. If an ES is in a bypass state -
a. DF election is disabled (i.e. assumed DF)
b. SPH filter is not installed.
3. MACs learnt via the host bond are advertised with a zero ESI.
When the ES moves out of "bypass" the MACs are moved from a zero-ESI to
the correct non-zero id. This is treated as a local station move.
Implementation:
===============
When (a) an ES is detached from a hostbond or (b) an ES-bond goes into
LACP bypass zebra deletes all the local macs (with that ES as destination)
in the kernel and its local db. BGP re-sends any imported MAC-IP routes
that may exist with this ES destination as remote routes i.e. zebra can
end up programming a MAC that was perviously local as remote pointing
to a VTEP-ECMP group.
When an ES is attached to a hostbond or an ES-bond goes
LACP-up (out of bypss) zebra again deletes all the local macs in the
kernel and its local db. At this point BGP resends any imported MAC-IP
routes that may exist with this ES destination as sync routes i.e.
zebra can end up programming a MAC that was perviously remote
as local pointing to an access port.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Store instance index at startup and use it when processing vty commands.
The instance itself may be created and deleted by the user in runtime
using `[no] router ospf X` command.
Fixes#7908
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
VNI configuration is done without NB layer in default VRF. It leads to
the following problems:
```
vtysh -c "conf" -c "vni 1"
vtysh -c "conf" -c "vrf default" -c "no vni"
```
Second command does nothing, because the NB node is not created by the
first command.
```
vtysh -c "conf" -c "vrf default" -c "vni 1"
vtysh -c "conf" -c "no vni 1"
```
Second command doesn't delete the NB node created by the first command.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
- Don't document 'no' commands
- Don't use .. index:: for clicmds
- Don't document all possible variants
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
When an unknown LSA is in the database and the user issues the
"show ipv6 ospf6 database" command there is a crash. The code currently
doesn't properly handle display of unknown LSAs.
Signed-off-by: Lynne Morrison <lynne@voltaio.net>
Just get names, types and order from pahole; ditch offset & size since
they're different on 32/64 bit. None of the structs has padding
currently; if we really need that it can be implemented in the future.
(Padding will raise an exception, so it won't break silently.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Apparently you can do `#__VA_ARGS__` and it actually does something
sensible, so here we go recording the format parameters for log messages
into the xref.
This allows some more checking in xrelfo.py, e.g. hints to use `%pFX`
and co.
Signed-off-by: David Lamparter <equinox@diac24.net>
This adds _clippy.ELFFile, which provides a fast wrapper around libelf.
The API is similar to / a subset of pyelfutils, which unfortunately is
painfully slow (to the tune of minutes instead of seconds.)
The idea is that xrefs can be read out of ELF files by reading out the
"xref_array" section or "FRRouting/XREF" note.
Signed-off-by: David Lamparter <equinox@diac24.net>
This is causing problems with VM move i.e. transition from remote
neigh to local neigh. This transition involves changing the NUD_STATE
NUD_NOARP to NUD_STALE. And the weak override flag prevents changing
the state from connected (REACHABLE, NOARP, PERMANENT) to STALE.
PS: Weak-override was originally used to prevent race conditions where
FRR can end up making a REACHABLE neigh STALE. We may need to revisit
and address that case at a later point.
Ticket: CM-30273
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
These don't need to be documented, most of the time they are obvious,
when they aren't the behavior can just be described in the command
description.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
- Generate index entries automatically
- Remove manual command index entries
- Clean up a few other manual index entries
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
When the control plane protocol is created, the vrf structure is
allocated, and its address is stored in the northbound node.
The vrf structure may later be deleted by the user, which will lead to
a stale pointer stored in this node.
Instead of this, allow daemons that use the vrf pointer to register the
dependency between the control plane protocol and vrf nodes. This will
guarantee that the nodes will always be created and deleted together, and
there won't be any stale pointers.
Add such registration to staticd and pimd.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When handling a large number of events at one time
FRR will call monotime and getrusage 2 times for each
event. With this change modify the code to change
this to (X events / 2) + 1 calls of getrusage and monotime
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Since some recent commit, building c++ code attempting to use zlog_debug
(or any other level) would fail with the following complaint:
lib/zlog.h:91:3: sorry, unimplemented: non-trivial designated
initializers not supported
};
^
lib/zlog.h:105:26: note: in expansion of macro ‘_zlog_ref’
#define zlog_debug(...) _zlog_ref(LOG_DEBUG, __VA_ARGS__)
This is due to out-of-order initialization of the xrefdata struct
fields. Setting them all in the order in which they are defined
fixes the issue.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
The changes add the "jsoncmp_pass" and the "jsoncmp_fail" commands to
compare VTY shell's JSON output to an expected JSON object during
topotests using the LabN testing framework. This helps to eliminate
false negative test results (i.e. due to routes beeing out of order
after convergence or cosmetic changes in VTY shell's text output).
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
When parsing the output of "ip -6 address", allow arbitrary base interface
names (the part after "@" in the interface name), not just "if0-9". Without
this, link-local addresses sometimes are attributed to the wrong interface
because we're not matching the interface name but still handle the
interface's addresses.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
