Add new feature and commands to sharpd in order to collect Traffic Engineering
Database information from an IGP (OSPF or IS-IS) though the ZAPI Opaque
Message and the support of the Link State Library.
This feature serves as an example of how to code a Traffic Engineering
Database consumer and tests the mechanism.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This new test launches a small network composed by 4 OSPF routers with
Traffic Engineering and Segment Routing configuration. To assess the Link
State Traffic Engineering feature, the TED of each router is compared
against the reference TED which corresponds to the network topology.
Then a series of 6 steps, where Link, TE & SR configurations are modified
up to r4 shutwdown, are used to verify that the TED is correctly updated
on the 4 routers.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This patch allows to store Link State Information received through the various
LSAs into a dedicated Traffic Engineering Database (TED). This feature is
automatically activated once mpls-te is enabled.
A new CLI command `mpls-te export` permits to export the TED to other daemons
through the new ZAPI Opaque Link State messages. In complement, a new CLI
command `show ip ospf mpls-te database ...` output the contains of the TED to
the console.
Major modifications take place in ospf_te.[c, h]. File ospf_zebra.c has been
modified to handle TED synchronisation request.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This patch corrects two problems that affect Inter-AS LSA:
1/ Inter-LSA are never flood due to an incorrect setting of specific flag.
2/ When looking to the detail of the OSPF LSA with the command
`show ip ospf database opaque-xxx`, it appears that only the Inter-AS
advertising router is abble to show the detail of the Inter-AS LSA. Foreign
routers are only abble to show the header of this Inster-AS LSA. The problem
comes from the registration of Inter-AS management functions which is done
only on the advetising router. So, the function `ospf_mpls_te_show_info()` is
never call on neighbor routers that have not resgistered Inter-AS management
callback functions.
First, this patch modify functions `set_linkparams_inter_as()` and
`unset_linkparams_inter_as()` to respectively set and unset flags that control
the Inter-AS LSA flooding. Flag & Type from `struct mpls_te_link` have been
redefined: Flag is used to determine if flooding is AS or not and Type is only
used to determine the type of the LSA.
Second, this patch register Inter-AS management functions for both AS and Area
flooding with a different function for LSA origination as parameter is passed
as void and it is mandatory to determine the flooding context:
`struct *ospf` for AS flooding and `struct *ospf_area` for Area flooding.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
When an interface goes down, if it is MPLS-TE enabled, the corresponding
TE Opaque LSA is not flushed and continue to be advertised.
The problem is due to bugs in ISM and NSM handler functions of ospf_te.c file:
- ospf_mpls_te_ism_change():
- flag associated with Link Parameters is reset
- ISM_Down state is not correctly handle
- ospf_mpls_te_nsm_change():
- flag associated with Link Parameters is reset
- NSM_Down and NSM_Delete states are not handle
This patch correct this problem.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add new status for Vertex, Edge and Subnet to manage their
respective states in the data base.
Add new functions:
- to register/unregister server and client
- to show content of the Database (VTY and Json output)
- to update and compare subnets
- to clean vertex and ted from ORPHAN elements
- to convert message or stream into a Link State Element and update
Link State Database accordingly to message event
Change Edge and Vertex key computation by using the host order systematically.
This impact mostly key based on IPv4 addresses where `ntohl()` function must
be used when searching a Vertex or Edge by key.
Update the documentation accordingly
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
New BFD protocol integration API with abstractions to fix most common
protocol integration errors:
- Set address family together with the source/destination addresses
- Set the TTL together with the single/multi hop option
- Set/unset profile/interface easily
- Keep the arguments so we don't have to rebuild them every time
- Install/uninstall functions that keep track of current state so the
daemon doesn't have to
- Reinstall when critical configuration changes (address, multi hop
etc...)
- Reconfigure BFD when the daemon restarts automatically
- Automatically calls the user defined callback for session update
- Shutdown handler for all protocols
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Changes:
- Decrease hello interval to avoid packet loss slow downs
- Decrease dead interval to converge faster
- Remove previous 'Full' state check that wasn't checking for all
peers (only one per router)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Current implementation of commands `show_ip_ospf_instance_database_cmd`
and `show_ip_ospf_instance_database_type_adv_router_cmd` have the
following problems:
- they doesn't have "vrf all" argument, however the processing of this
argument is implemented,
- they incorrectly implement json output for instances - they don't
output anything to the vty and don't release the json object.
To fix the problems, let's do the following:
1. Split `show_ip_ospf_instance_database_cmd` into two aliases to
`show_ip_ospf_database_max_cmd` and `show_ip_ospf_instance_database_max_cmd`.
The code is the same and doesn't need to be duplicated.
2. Split `show_ip_ospf_instance_database_type_adv_router_cmd` into two
separate functions - one regular and one for instances, which now
correctly implements the processing for json output.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
As noted by Donald:
When FRR is starting all daemons (or restarting them all) FRR is reading
in the configuration 1 time for each daemon specified to run. This is
not a big deal if you have a very small configuration. But with large
configurations FRR is taking long enough that watchfrr is not
establishing connection to all the daemons and starting some over.
Modify the code so that vtysh is only read in at the end of a all
sequence. If we are restarting an individual daemon allow the read in of
the whole config.
Reported-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
This one needed a move of zebra_stable_node_cleanup() from static_vrf.c
to static_routes.c. But it seems to actually make sense there.
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as other commits -- convert most DEFINE_MTYPE into the _STATIC
variant, and move the remaining non-static ones to appropriate places.
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as previous commit -- convert most DEFINE_MTYPE into the _STATIC
variant, and move the remaining non-static ones to appropriate places.
Signed-off-by: David Lamparter <equinox@diac24.net>
Convert most DEFINE_MTYPE into the _STATIC variant, and move the
remaining non-static ones to appropriate places.
Signed-off-by: David Lamparter <equinox@diac24.net>
For link-local IPv6 next hops, the next hop tracking is implemented based
on interface status changes. For this purpose, the ifindex is stored in
the NHT. Reset this value if a change in ifindex is noticed, such as for
example after a restart of the networking service.
Also add some additional debug logs.
Signed-off-by: Vivek Venkatraman <vivek@nvidia.com>
Updates: "bgpd: Switch LL nexthop tracking to be interface based"
Ticket: RM 2575386
Testing Done:
1. Manual verification
2. Precommit (#156), evpn-smoke (#155), bgp-smoke (#157), vrl (#158)
-- Precommit is clean, reported failures in evpn-smoke & vrl are resolved
-- some other tests fail in evpn-smoke, bgp-smoke & vrl, appear to be existing
-- or unrelated failures
One of the configure-time test programs produces a warning with
gcc 9 (at least), so it fails if -Werror is enabled. Fix that.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This logs the unique ID prefix from the xref that each log message call
has, and adds on/off knobs for both EC and unique ID printing.
Signed-off-by: David Lamparter <equinox@diac24.net>
This parametrized use of flog with variable EC and priority doesn't mesh
particularly well with the xref code & there isn't really much reason to
not use fixed/constant calls like this.
Signed-off-by: David Lamparter <equinox@diac24.net>
Just small utilities for when you already have a struct fbuf (i.e. when
bprintfrr() is used to construct longer text from multiple pieces.)
Signed-off-by: David Lamparter <equinox@diac24.net>
