These caused some function names to change, which frr-llvm-cg looks at
in order to improve callgraph accuracy.
Signed-off-by: David Lamparter <equinox@diac24.net>
clang does not accept __attribute__((transparent_union)) in C++ source
code. We don't need it there anyway so let's just limit it to C.
Signed-off-by: David Lamparter <equinox@diac24.net>
This replaces `%n` with a safe, out-of-band option that simply records
the start and end offset of the output produced for each `%...`
specifier.
The old `%n` code is removed.
Signed-off-by: David Lamparter <equinox@diac24.net>
Allowing printfrr extensions to directly write to the output buffer has
a few advantages:
- there is no arbitrary length limit imposed (previously 64)
- the output doesn't need to be copied another time
- the extension can directly use bprintfrr() to put together pieces
The downside is that the theoretical length (regardless of available
buffer space) must be computed correctly.
Extended unit tests to test these paths a bit more thoroughly.
Signed-off-by: David Lamparter <equinox@diac24.net>
Incorporate into the `show thread cpu` the number of times
we have issued warnings about a particular thread being
too slow.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When generating SLOW_THREAD warnings let's differentiate between
a cpu bound process and a wall bound process. Effectively
a slow thread can now be a process in FRR doing lots of work( cpu bound )
or wall bound ( the cpu is heavy load and a FRR process may be pre-empted
and never scheduled ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
During Review it was suggested that appending rpki_
to curr_state and target_state would be better
variable names. Instead of going and fixing
3 or so commits up. Just do this one.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the ability for the end operator to query the state of valid
or invalid or no information rpki prefix information.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When displaying data about the rpki state, use the
string `rpki validation-state` instead of `validation-state:`
to avoid confusion with `(valid)`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add transactional northbound callbacks for route-map
options for unnumbered neighbor and peer-group under
l2vpn-evpn address-family.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
The MH datastructures were being released before the paths that were
referencing them. Fix is to do the MH cleanup last.
The MH finish function has also been stripped down to only do a
datastructure cleanup i.e. avoid sending route updates etc.
Ticket: 31376
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
1. When a local ES is deleted or the ES-bond goes into bypass we treat
imported MAC-IP routes with that ES destination as remote routes instead
of sync routes. This requires a re-evaluation of the routes as
"non-local-dest" and an update to zebra.
2. When a ES is attached to an access port or the ES-bond transitions from
bypass to LACP-up we treat imported MAC-IP routes with that ES destination as
sync routes. This requires a re-evaluation of the routes as
"local-dest" and an update to zebra.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In the case of EVPN type-2 routes that use ES as destination, BGP
consolidates the nh (and nh->rmac mapping) and sends it to zebra as
a nexthop add.
This nexthop is the EVPN remote PE and is created by reference of
VRF IPvx unicast paths imported from EVPN Type-2 routes.
zebra uses this nexthop for setting up a remote neigh enty for the PE
and a remote fdb entry for the PE's RMAC.
Ticket: CM-31398
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Setup a mh_info indirection in the path extra. This has been done to
avoid increasing evpn route's path size to add new (type based) pointers
in path_info_extra.
Ticket: CM-31398
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
EVPN nexthops are installed as remote neighs by zebra. This was earlier
done only via VRF IPvX uni routes imported from EVPN routes.
With EVPN-MH these VRF routes now reference a L3NHG which is setup based
on the EAD and doesn't include the RMAC. To workaround that BGP now
consolidates and maintains EVPN nexthops which are then sent to zebra.
zebra sets up these nexthops as L3-VNI nh entries using a dummy type-1
route as reference.
Ticket: CM-31398
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Theoretically we should just be able to use the L3 NHG in the other-VRF/nh-VRF.
But there is some change list handling (when an ES is added to or
removed from a VRF) that needs to be updated to account for routes in other
VRFs using that ES-VRF as nexthop. Till that is done we will disable L3-NHG
use for routes leaked from a different VRF.
Route in tenant2 with ES/NHG as destination -
===========================================
root@leaf11:mgmt:~# ip route show vrf tenant2 22.1.0.7
22.1.0.7 nhid 75000012 proto bgp metric 20
root@leaf11:mgmt:~# ip nexthop list id 75000012
id 75000012 group 103/107/111 proto bgp
root@leaf11:mgmt:~# ip nexthop |grep "103\|107\|111"
id 103 via 6.0.0.11 dev vlan12 scope link proto bgp onlink
id 107 via 6.0.0.12 dev vlan12 scope link proto bgp onlink
id 111 via 6.0.0.13 dev vlan12 scope link proto bgp onlink
id 75000012 group 103/107/111 proto bgp
root@leaf11:mgmt:~#
Leaked into VRF1 with a flat/exploded mpaths
============================================
root@leaf11:mgmt:~# ip route show vrf tenant1 |grep -A3 22.1.0.7
22.1.0.7 proto bgp metric 20
nexthop via 6.0.0.11 dev vlan12 weight 1 onlink
nexthop via 6.0.0.12 dev vlan12 weight 1 onlink
nexthop via 6.0.0.13 dev vlan12 weight 1 onlink
root@leaf11:mgmt:~#
Ticket: CM-31115
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Force flush all ES-EVI PE entries when a L2-VNI is deleted. This will
implicitly free up the remote ES-EVI and deref the ES entry.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
There are two changes in this commit -
1. Maintain a list of global MAC-IP routes per-ES. This list is maintained
for quick processing on the following events -
a. When the first VTEP/PE becomes active in the ES-VRF, the L3 NHG is
activated and the route can be sent to zebra.
b. When there are no active PEs in the ES-VRF the L3 NHG is
de-activated and -
- If the ES is present in the VRF -
The route is not installed in zebra as there are no active PEs for
the ES-VRF
- If the ES is not present in the VRF -
The route is installed with a flat multi-path list i.e. without L3NHG.
This is to handle the case where there are no locally attached L2VNIs
on the ES (for that tenant VRF).
2. Reinstall VRF route when an ES is installed or uninstalled in a
tenant VRF (the global MAC-IP list in #1 is used for this purpose also).
If an ES is present in the VRF we use L3NHG to enable fast-failover of
routed traffic.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This is done to clearly indicate what routes are being linked to
the list i.e. MAC-IP routes in the VNI table.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In a sym-IRB setup the remote ES may not be installed if the tenant
VRF is not present locally. To allow that case while retaining the
fast-failover benefits for the case where the tenant VRF is locally
present we use the following approach -
1. If ES is present in the tenant VRF we use the L3NHG for installing
the MAC-IP based tenant route. This allows for efficient failover via
L3NHG updates.
2. If the ES is not present locally in the corresponding tenant VRF we
fall back to a non-NHG multi-path based routing approach. In this
case individual routes are updated when the ES links flap.
PS: #1 can be turned off entirely by disabling use-l3-nhg in BGP.
Ticket: CM-30935
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When an ES goes down the MAC-IP route must be updated to remove it from
the tenant VRF routing table. This is because the fast-failover
(via EAD-per-ES withdraw) procedures described in RFC 7432 are only
applicable to L2 forwarding/MAC-ECMP. For L3/routed traffic (in a
sym-IRB setup) failover, individual paths need to be withdrawn.
To handle this difference in L2/L3 requirements BGP updates the MAC-IP
route to include the L3 ECOM if local destination ES is oper-up and
to exclude the L3 ECOM if local ES is oper-down.
Ticket: CM-30935
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
