When creating a large number of vrf's we are creating a fairly
large number of hash tables per vrf. Reduce memory usage on
startup as well as let us identify the table these things come
from.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is always a 16 bit unsigned value.
- signed int is the wrong type to use
- encoding a signed int as a uint32 is bad practice
- decoding a signed int encoded as a uint32 into a uint16 is bad
practice
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
EVPN nexthops are installed as remote neighs by zebra. This was earlier
done only via VRF IPvX uni routes imported from EVPN routes.
With EVPN-MH these VRF routes now reference a L3NHG which is setup based
on the EAD and doesn't include the RMAC. To workaround that BGP now
consolidates and maintains EVPN nexthops which are then sent to zebra.
zebra sets up these nexthops as L3-VNI nh entries using a dummy type-1
route as reference.
Ticket: CM-31398
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
When an ES-bond comes out of bypass FRR needs to flush the local MACs learnt
while the bond was in bypass. To do that efficiently local MACs are linked
to the dest-access port. This only happens if the access-port is in
LACP-bypass or if it is non-ES.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Feature overview:
=================
A 802.3ad bond can be setup to allow lacp-bypass. This is done to enable
servers to pxe boot without a LACP license i.e. allows the bond to go oper
up (with a single link) without LACP converging.
If an ES-bond is oper-up in an "LACP-bypass" state MH treats it as a non-ES
bond. This involves the following special handling -
1. If the bond is in a bypass-state the associated ES is placed in a
bypass state.
2. If an ES is in a bypass state -
a. DF election is disabled (i.e. assumed DF)
b. SPH filter is not installed.
3. MACs learnt via the host bond are advertised with a zero ESI.
When the ES moves out of "bypass" the MACs are moved from a zero-ESI to
the correct non-zero id. This is treated as a local station move.
Implementation:
===============
When (a) an ES is detached from a hostbond or (b) an ES-bond goes into
LACP bypass zebra deletes all the local macs (with that ES as destination)
in the kernel and its local db. BGP re-sends any imported MAC-IP routes
that may exist with this ES destination as remote routes i.e. zebra can
end up programming a MAC that was perviously local as remote pointing
to a VTEP-ECMP group.
When an ES is attached to a hostbond or an ES-bond goes
LACP-up (out of bypss) zebra again deletes all the local macs in the
kernel and its local db. At this point BGP resends any imported MAC-IP
routes that may exist with this ES destination as sync routes i.e.
zebra can end up programming a MAC that was perviously remote
as local pointing to an access port.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Added support for advertising SVI MAC if EVPN-MH is enabled.
In the case of EVPN MH arp replies from an attached server can be sent to
the ES-peer. To prevent flooding of the reply the SVI MAC needs to be
advertised by default.
Note:
advertise-svi-ip could have been used as an alternate way to advertise
SVI MAC. However that config cannot be turned on if SVI IPs are
re-used (which is done to avoid wasting IP addresses in a subnet).
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
SVI IP is being advertised unconditionally i.e. even if disabled (and
that is the default config). This can be problematic when the SVI address
is re-used across racks.
Added the user config condition in all the relevant places where the
SVI advertisement is triggered.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
the old VXLAN function for local MAC deletion was still in
existence and being called from the VXLAN code whilst the new
generic function was not being called at all. Resolve this so
the generic function matches the old function and is called
exclusively.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
If a netlink/dp notification is rxed for a neigh without the peer-sync
flag FRR re-installs the entry with the right flags. This change is
needed to handle cases where the dataplane and FRR may fall out of
sync because of neigh learning on the network ports (i.e. via
the VxLAN).
Ticket: CM-30693
The problem was found during VM mobility "torture" tests where 100s
of extended VM moves were done.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
After removal of L3VNI config, the VNI should become an L2VNI if a VxLAN
interface is present for the VNI. This case is not handled in the code.
Changes:
1. After unconfiguring L3VNI, create an L2VNI if VxLAN interface is present
for the VNI.
2. Trigger an update to BGP.
3. Read MAC and ARP entries from kernel.
This PR fixes the issue only for route type-2, 3 and 5. This PR does not address
states regarding route type-1, 4 and multicast group for VxLAN interface.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
When a local ES flaps there are two modes in which the local
MACs are failed over -
1. Fast failover - A backup NHG (ES-peer group) is programmed in the
dataplane per-access port. When a local ES flaps the MAC entries
are left unaltered i.e. pointing to the down access port. And the
dataplane redirects traffic destined to the oper-down access port
via the backup NHG.
2. Slow failover - This mode needs to be turned on to allow dataplanes
not capable of re-directing traffic. In this mode local MAC entries
on a down local ES are re-programmed to point to the ES-peers'
NHG. And vice-versa i.e. when the ES comes up the MAC entries
are re-programmed with the access port as dest.
Fast failover is on by default. Slow failover can be enabled via the
following config -
evpn mh redirect-off
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
There are two fixes in this commit -
1. Prevent implicit deletion of (*,G) entries during (S,G) cleanup.
This is done by creating a dummy reference on all (*,G) entries.
This is needed for a hash-walk based table cleanup.
2. Free up the SG hash table when the VRF is deleted.
Ticket: CM-30151
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
DAD is not supported currently with EVPN-MH so we turn it off internally
when the first ES config is detected.
PS: Note that when all local ESs are deleted DAD will stay off and
will need to be cleared via a daemon restart.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Local ethernet segments are held in a protodown or error-disabled state
if access to the VxLAN overlay is not ready -
1. When FRR comes up the local-ESs/access-port are kept protodown
for the startup-delay duration. During this time the underlay and
EVPN routes via it are expected to converge.
2. When all the uplinks/core-links attached to the underlay go down
the access-ports are similarly protodowned.
The ES-bond protodown state is propagated to each ES-bond member
and programmed in the dataplane/kernel (per-bond-member).
Configuring uplinks -
vtysh -c "conf t" vtysh -c "interface swp4" vtysh -c "evpn mh uplink"
Configuring startup delay -
vtysh -c "conf t" vtysh -c "evpn mh startup-delay 100"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
EVPN protodown display -
========================
root@torm-11:mgmt:~# vtysh -c "show evpn"
L2 VNIs: 10
L3 VNIs: 3
Advertise gateway mac-ip: No
Advertise svi mac-ip: No
Duplicate address detection: Disable
Detection max-moves 5, time 180
EVPN MH:
mac-holdtime: 60s, neigh-holdtime: 60s
startup-delay: 180s, start-delay-timer: 00:01:14 <<<<<<<<<<<<
uplink-cfg-cnt: 4, uplink-active-cnt: 4
protodown: startup-delay <<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
ES-bond protodown display -
===========================
root@torm-11:mgmt:~# vtysh -c "show interface hostbond1"
Interface hostbond1 is up, line protocol is down
Link ups: 0 last: (never)
Link downs: 1 last: 2020/04/26 20:38:03.53
PTM status: disabled
vrf: default
OS Description: Local Node/s torm-11 and Ports swp5 <==> Remote Node/s hostd-11 and Ports swp1
index 58 metric 0 mtu 9152 speed 4294967295
flags: <UP,BROADCAST,MULTICAST>
Type: Ethernet
HWaddr: 00:02:00:00:00:35
Interface Type bond
Master interface: bridge
EVPN-MH: ES id 1 ES sysmac 00:00:00:00:01:11
protodown: off rc: startup-delay <<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
ES-bond member protodown display -
==================================
root@torm-11:mgmt:~# vtysh -c "show interface swp5"
Interface swp5 is up, line protocol is down
Link ups: 0 last: (never)
Link downs: 3 last: 2020/04/26 20:38:03.52
PTM status: disabled
vrf: default
index 7 metric 0 mtu 9152 speed 10000
flags: <UP,BROADCAST,MULTICAST>
Type: Ethernet
HWaddr: 00:02:00:00:00:35
Interface Type Other
Master interface: hostbond1
protodown: on rc: startup-delay <<<<<<<<<<<<<<<<
root@torm-11:mgmt:~#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Zebra's clear duplicate detect command is rpc converted.
There is condition where cli fails with human readable message.
Using northboun's errmsg buffer to display error message to
user.
Testing:
bharat# clear evpn dup-addr vni 1002 ip 2011:11::11
Error type: generic error
Error description: Requested IP's associated MAC aa:aa:aa:aa:aa:aa is still in duplicate state
bharat# clear evpn dup-addr vni 1002 ip 11.11.11.11
Error type: generic error
Error description: Requested IP's associated MAC aa:aa:aa:aa:aa:aa is still in duplicate state
Signed-off-by: Chirag Shah <chirag@nvidia.com>
With l2vni flap leading to duplicate entry creation
in l3vni's l2vni-list.
Use list sorted add with no duplicates.
root@TORC11:mgmt:~# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
State: Up
...
L2 VNIs: 1000 1000 1000 0 0 1002
root@TORC11:mgmt:~# ip link set down vx-1002
root@TORC11:mgmt:~# ip link set up vx-1002
root@TORC11:mgmt:~# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
State: Up
...
L2 VNIs: 1000 1000 1000 0 0 1002 1002
Ticket:CM-31545
Reviewed By:
Testing Done:
With Fix:
Multiple time flaps vni counts remained the same.
root@TORC11:mgmt:~# ip link set down vx-1002
root@TORC11:mgmt:~# ip link set up vx-1002
root@TORC11:mgmt:~# ip link set down vx-1002
root@TORC11:mgmt:~# ip link set up vx-1002
root@TORC11:mgmt:~# net show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
State: Up
...
L2 VNIs: 1000 1002
Signed-off-by: Chirag Shah <chirag@nvidia.com>
the walk routine is used by vxlan service to identify some contexts in
each specific network namespace, when vrf netns backend is used. that
walk mechanism is extended with some additional paramters to the walk
routine.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when duplicate address detection is observed, some incrementation,
some timing mechanisms need to be done. For that the main evpn
configuration is retrieved. Until now, the VRF that was storing the dad
config parameters was the same VRF that hosted the VXLAN interface. With
netns backend, this is not true, as the VXLAN interface is in the
same VRF as the bridge interface. The modification takes same definition
as in BGP, that is to say that there is a single bgp evpn instance, and
this is that instance that will give the correct config settings.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
all network namespaces are read so as to collect interesting fdb and
neighbor tables for EVPN.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
With vrf-lite mechanisms, it is possible to create layer 3 vnis by
creating a bridge interface in default vr, by creating a vxlan interface
that is attached to that bridge interface, then by moving the vxlan
interface to the wished vrf.
With vrf-netns mechanism, it is slightly different since bridged
interfaces can not be separated in different network namespaces. To make
it work, the setup consists in :
- creating a vxlan interface on default vrf.
- move the vxlan interface to the wished vrf ( with an other netns)
- create a bridge interface in the wished vrf
- attach the vxlan interface to that bridged interface
from that point, if BGP is enabled to advertise vnis in default vrf,
then vxlan interfaces are discovered appropriately in other vrfs,
provided that the link interface still resides in the vrf where l2vpn is
advertised.
to import ipv4 entries from a separate vrf, into the l2vpn, the
configuration of vni in the dedicated vrf + the advertisement of ipv4
entries in bgp vrf will import the entries in the bgp l2vpn.
the modification consists in parsing the vxlan interfaces in all network
namespaces, where the link resides in the same network namespace as the
bgp core instance where bgp l2vpn is enabled.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
clone zebra_vxlan.c to create a file zebra_evpn.c for core
EVPN functions whilst retaining the history of zebra_vxlan.c
Signed-off-by: Pat Ruddy <pat@voltanet.io>
extract the neighbor uninstall part of
zebra_vxlan_handle_kernel_neigh_del into a new function
zebra_evpn_neigh_del_ip in zebra_evpn_neigh.c.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
extract the neighbor uninstall part of process_remote_macip_add
into a new function zebra_evpn_neigh_remote_uninstall in
zebra_evpn_neigh.c.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
extract the neighbor part of process_remote_macip_add into a new
function zebra_evpn_neigh_gw_macip_add in zebra_evpn_neigh.c.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
extract the neighbor part of process_remote_macip_add into a new
function process_neigh_remote_macip_add in zebra_evpn_neigh.c.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
clone zebra_vxlan.c to create a file zebra_evpn_neigh.c for neighbor
dB functions whilst retaining the history of zebra_vxlan.c
Signed-off-by: Pat Ruddy <pat@voltanet.io>
extract mac_gateway add code from zevi_gw_macip_add and move it to
a new generic function zebra_evpn_mac_gw_macip_add in zebra_evpn_mac.c
Signed-off-by: Pat Ruddy <pat@voltanet.io>
extract generic local mac add code from zebra_vxlan_local_mac_del
into a new function zebra_evpn_del_local_mac in zebra_evpn_mac.c
Signed-off-by: Pat Ruddy <pat@voltanet.io>
extract the local mac add code from zebra_vxlan_local_mac_add_update
and create a new generic local mac add function
zebra_evpn_add_update_local_mac
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Move MAC add code from process_remote_macip_add in zebra_vxlan.c
to a generic function process_mac_remote_macip_add in
zebra_evpn_mac.c
Signed-off-by: Pat Ruddy <pat@voltanet.io>
clone zebra_vxlan.c to create a file zebra_evpn_mac.c for MAC dB
functions whilst retaining the history of zebra_vxlan.c
Signed-off-by: Pat Ruddy <pat@voltanet.io>
The main zebra_vni_t hash structure has been renamed to zebra_evpn_t
to allow for other transport underlays. Rename functions and variables
to reflect this change.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
MAC-IP routes are used for syncing local entries across redundant
switches in an EVPN-MH setup. A path from a peer that has a local
ES as destination is tagged as a SYNC path. The SYNC path results in the
addition of local MAC and/or local neigh entry in zebra and in the
dataplane.
Implementation overview
=======================
1. Three new flags "local-inactive", "peer-active" and "peer-proxy"
are maintained per-local-MAC and per-local-Neigh entry.
2. The "peer-XXX" flags are set and cleared via SYNC path updates
from BGP. Proxy sync paths result in the setting of "peer-proxy" flag
(and non-proxies result in the "peer-active").
3. A neigh entry that has a "peer-XXX" flag set is programmed as
"static" in the dataplane.
4. A MAC entry that has a "peer-XXX" flag set or is referenced by
a sync-neigh entry (that has a "peer-XXX" flags set) is programmed
as "static" in the dataplane.
5. The sync-seq number is used to normalize the MM seq number across
all the redundant switches i.e. the max MM seq number across all
switches is used by each of the switches. This commit also includes
the changes needed for extended MM seq syncing.
6. A MAC/neigh entry has to be local-active or peer-active to sent to
BGP. An entry that is NOT local-active is sent with the proxy flag (so
BGP can "proxy" advertise it).
7. The "peer-active" flag is aged out by zebra by using a hold_timer
(this is instead of being abruptly dropped on SYNC path delete). This
age-out is needed to handle peer-switch restart (procedures are specified
in draft-rbickhart-evpn-ip-mac-proxy-adv). The holdtime needs to be
sufficiently long to allow an external neighmgr daemon or the dataplane
component to independently probe and establish local reachability of a
host. The MAC and neigh hold time values are configurable.
PS: In the future this probing may happen in FRR itself.
CLI changes to display sync info
================================
MAC
===
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
root@torm-11:mgmt:~# net show evpn mac vni 1000
Number of MACs (local and remote) known for this VNI: 6
Flags: N=sync-neighs, I=local-inactive, P=peer-active, X=peer-proxy
MAC Type Flags Intf/Remote ES/VTEP VLAN Seq #'s
00:02:00:00:00:25 local vlan1000 1000 0/0
02:02:00:00:00:02 local PI hostbond1 1000 0/0
02:02:00:00:00:06 remote 03:00:00:00:00:02:11:00:00:01 0/0
02:02:00:00:00:01 local X hostbond1 1000 0/0
00:00:00:00:00:11 local PI hostbond1 1000 0/0
02:02:00:00:00:05 remote 03:00:00:00:00:02:11:00:00:01 0/0
root@torm-11:mgmt:~#
root@torm-11:mgmt:~# net show evpn mac vni 1000 mac 00:00:00:00:00:11
MAC: 00:00:00:00:00:11
ESI: 03:00:00:00:00:01:11:00:00:01
Intf: hostbond1(58) VLAN: 1000
Sync-info: neigh#: 0 local-inactive peer-active >>>>>>>>>>>>
Local Seq: 0 Remote Seq: 0
Neighbors:
No Neighbors
root@torm-11:mgmt:~#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
neigh
=====
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
root@torm-11:mgmt:~# net show evpn arp vni 1003
Number of ARPs (local and remote) known for this VNI: 4
Flags: I=local-inactive, P=peer-active, X=peer-proxy
Neighbor Type Flags State MAC Remote ES/VTEP Seq #'s
2001:fee1:0:3::6 local active 00:02:00:00:00:25 0/0
45.0.3.66 local P active 00:02:00:00:00:66 0/0
45.0.3.6 local active 00:02:00:00:00:25 0/0
fe80::202:ff:fe00:25 local active 00:02:00:00:00:25 0/0
root@torm-11:mgmt:~#
root@torm-11:mgmt:~# net show evpn arp vni 1003 ip 45.0.3.66
IP: 45.0.3.66
Type: local
State: active
MAC: 00:02:00:00:00:66
Sync-info: peer-active >>>>>>>>>>>>>>>>
Local Seq: 0 Remote Seq: 0
root@torm-11:mgmt:~#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
1. Local ethernet segments are configured in zebra by attaching a
local-es-id and sys-mac to a access interface -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
!
interface hostbond1
evpn mh es-id 1
evpn mh es-sys-mac 00:00:00:00:01:11
!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
This info is then sent to BGP and used for the generation of EAD-per-ES
routes.
2. Access VLANs associated with an (ES) access port are translated into
ES-EVI objects and sent to BGP. This is used by BGP for the
generation of EAD-EVI routes.
3. Remote ESs are imported by BGP and sent to zebra. A list of VTEPs
is maintained per-remote ES in zebra. This list is used for the creation
of the L2-NHG that is used for forwarding traffic.
4. MAC entries with a non-zero ESI destination use the L2-NHG associated
with the ESI for forwarding traffic over the VxLAN overlay.
Please see zebra_evpn_mh.h for the datastruct organization details.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Revert "zebra: support for macvlan interfaces"
This reverts commit bf69e212fd.
Revert "doc: add some documentation about bgp evpn netns support"
This reverts commit 89b97c33d7.
Revert "zebra: dynamically detect vxlan link interfaces in other netns"
This reverts commit de0ebb2540.
Revert "bgpd: sanity check when updating nexthop from bgp to zebra"
This reverts commit ee9633ed87.
Revert "lib, zebra: reuse and adapt ns_list walk functionality"
This reverts commit c4d466c830.
Revert "zebra: local mac entries populated in correct netnamespace"
This reverts commit 4042454891.
Revert "zebra: when parsing local entry against dad, retrieve config"
This reverts commit 3acc394bc5.
Revert "bgpd: evpn nexthop can be changed by default"
This reverts commit a2342a2412.
Revert "zebra: zvni_map_to_vlan() adaptation for all namespaces"
This reverts commit db81d18647.
Revert "zebra: add ns_id attribute to mac structure"
This reverts commit 388d5b438e.
Revert "zebra: bridge layer2 information records ns_id where bridge is"
This reverts commit b5b453a2d6.
Revert "zebra, lib: new API to get absolute netns val from relative netns val"
This reverts commit b6ebab34f6.
Revert "zebra, lib: store relative default ns id in each namespace"
This reverts commit 9d3555e06c.
Revert "zebra, lib: add an internal API to get relative default nsid in other ns"
This reverts commit 97c9e7533b.
Revert "zebra: map vxlan interface to bridge interface with correct ns id"
This reverts commit 7c990878f2.
Revert "zebra: fdb and neighbor table are read for all zns"
This reverts commit f8ed2c5420.
Revert "zebra: zvni_map_to_svi() adaptation for other network namespaces"
This reverts commit 2a9dccb647.
Revert "zebra: display interface slave type"
This reverts commit fc3141393a.
Revert "zebra: zvni_from_svi() adaptation for other network namespaces"
This reverts commit 6fe516bd4b.
Revert "zebra: importation of bgp evpn rt5 from vni with other netns"
This reverts commit 28254125d0.
Revert "lib, zebra: update interface name at netlink creation"
This reverts commit 1f7a68a2ff.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
In networking restart event, l3vni (vxlan) interface followed by
associated vrf interfaces go down/deleted.
L3vni (oper) down event (from zebra to bgp) triggers to
clean up/un-import evpn routes (one-by-one) from the vrf table,
zebra internally removes the route entry from nexthop and RMAC hash.
When all the routes references in nexthop and RMAC db removed,
both (nexthop/rmac) are suppose to be uninstalled from the
bridge fdb and neigh table.
While evpn routes removal in progress, a vrf disable event removes
l3vni to its vrf association.
Subsequent bgp to evpn routes removal does not clean up thus evpn routes
reference to nexthop and RMAC remains in zebra hash.
bridge fdb and neigh tables are flushed out since networking restart brings down
all interfaces which results in flush of fdb and neigh tables.
By product is the zebra does not install nexthop and rmac when routes are re-imported
into vrf in VNI/VRF up event.
The fix is in vrf disable event to flush all l3vni's nexthop and rmac db.
Ticket:CM-30338
Reviewed By:CCR-10489
Testing Done:
Performed multiple networking restart and checked neigh and
bridge fdb tables for respective nexthop and router mac entry
programmed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
the walk routine is used by vxlan service to identify some contexts in
each specific network namespace, when vrf netns backend is used. that
walk mechanism is extended with some additional paramters to the walk
routine.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when duplicate address detection is observed, some incrementation,
some timing mechanisms need to be done. For that the main evpn
configuration is retrieved. Until now, the VRF that was storing the dad
config parameters was the same VRF that hosted the VXLAN interface. With
netns backend, this is not true, as the VXLAN interface is in the
same VRF as the bridge interface. The modification takes same definition
as in BGP, that is to say that there is a single bgp evpn instance, and
this is that instance that will give the correct config settings.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
this change is needed when a MAC/IP entry is learned by zebra, and the
entry happens to be in a different namespace. So that the entry be
active, the correct vni match has to be found.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
all network namespaces are read so as to collect interesting fdb and
neighbor tables for EVPN.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
this information is necessary for local information, because the
interface associated to the mac address is stored with its ifindex, and
the ifindex may not be enough to get to the right interface when it
comes with multiple network namespaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
other network namespaces are parsed because bridge interface can be
bridged with vxlan interfaces with a link in the default vrf that hosts
l2vpn.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
With vrf-lite mechanisms, it is possible to create layer 3 vnis by
creating a bridge interface in default vr, by creating a vxlan interface
that is attached to that bridge interface, then by moving the vxlan
interface to the wished vrf.
With vrf-netns mechanism, it is slightly different since bridged
interfaces can not be separated in different network namespaces. To make
it work, the setup consists in :
- creating a vxlan interface on default vrf.
- move the vxlan interface to the wished vrf ( with an other netns)
- create a bridge interface in the wished vrf
- attach the vxlan interface to that bridged interface
from that point, if BGP is enabled to advertise vnis in default vrf,
then vxlan interfaces are discovered appropriately in other vrfs,
provided that the link interface still resides in the vrf where l2vpn is
advertised.
to import ipv4 entries from a separate vrf, into the l2vpn, the
configuration of vni in the dedicated vrf + the advertisement of ipv4
entries in bgp vrf will import the entries in the bgp l2vpn.
the modification consists in parsing the vxlan interfaces in all network
namespaces, where the link resides in the same network namespace as the
bgp core instance where bgp l2vpn is enabled.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The function zebra_vxlan_print_neigh_vni_vtep does not create
a json object when json has been requested from the CLI and as a
result it prints out the information in normal CLI format.
Fix is to allocate the json object when required.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Use const with some args to ipaddr, zebra vxlan, mpls
lsp, and nexthop apis; add some extra checks to some
nexthop-related apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Some logging systems are, er, "allergic" to tabs in log messages.
(RFC5424: "The syslog application SHOULD avoid octet values below 32")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Readd the special MAC that represents the flood (head-end replication) entry
for EVPN-VxLAN upon getting a delete notification for it.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-25797
Ticket: CM-26238
Testing Done:
1. evpn-min, evpn-smoke - results summarized in CM-25798
It's been a year search and destroy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The existing behavior is when a remote VTEP is deleted,
its associatedneighbor (arp) and MAC entries are removed from
zebra database and do not wait for explicit type-2 route
withdraw from originating VTEP.
Remote type-2 route delete checks if VTEP is present before
removing the entry.
The behavior works fine when all evpn routes points to the
same nexthop as the VTEP IP.
In MLAG topology with advertise-pip, self type-2 and type-5 routes
are advertised with individual VTEP IP as nexthop ip for the route.
When a new VNI is created, it is assigned individual IP as tunnel-ip
then it transition to anycast IP (of the MLAG). During the transition,
type-3 route (VTEP delete) withdraw is sent for the individual IP.
The remote VTEP delete should not trigger to remove evpn routes pointing
to VTEP IP. Instead the route will be removed via explicit withdraw.
Ticket:CM-27752
Reviewed By:CCR-9722
Testing Done:
In evpn with MLAG deployment with advertise-pip and advertise-svi-ip
enabled, validated remote vtep delete does not remove self type-2 routes
from zebra DB. Upon explicit type-2 withdraw routes are removed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The decoding of _add and _del functions is practically identical
do a bit of work and make them so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
=================================================================
==13611==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7ffe9e5c8694 at pc 0x0000004d18ac bp 0x7ffe9e5c8330 sp 0x7ffe9e5c7ae0
WRITE of size 17 at 0x7ffe9e5c8694 thread T0
#0 0x4d18ab in __asan_memcpy (/usr/lib/frr/zebra+0x4d18ab)
#1 0x7f16f04bd97f in stream_get2 /home/qlyoung/frr/lib/stream.c:277:2
#2 0x6410ec in zebra_vxlan_remote_macip_del /home/qlyoung/frr/zebra/zebra_vxlan.c:7718:4
#3 0x68fa98 in zserv_handle_commands /home/qlyoung/frr/zebra/zapi_msg.c:2611:3
#4 0x556add in main /home/qlyoung/frr/zebra/main.c:309:2
#5 0x7f16eea3bb96 in __libc_start_main /build/glibc-OTsEL5/glibc-2.27/csu/../csu/libc-start.c:310
#6 0x431249 in _start (/usr/lib/frr/zebra+0x431249)
This decode is the result of a buffer overflow because we are
not checking ipa_len.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Macvlan down event have sentinel check of its parent
link presence.
Ticket:CM-26622
Reviewed By:CCR-9326
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
"show vrf vni" and "show evpn vni <l3vni>" commands
need to display correct router mac value.
"show evpn vni <l3vni>" detail l3vni needs to display
system mac as in PIP scenario value can be different.
Syste MAC would be derived from SVI interface MAC wherelse
Router MAC would be derived from macvlan interface MAC value.
Ticket:CM-26710
Reviewed By:CCR-9334
Testing Done:
TORC11# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
Local Vtep Ip: 36.0.0.11
Vxlan-Intf: vx-4001
SVI-If: vlan4001
State: Up
VNI Filter: none
System MAC: 00:02:00:00:00:2e
Router MAC: 44:38:39:ff:ff:01
L2 VNIs: 1000
TORC11# show vrf vni
VRF VNI VxLAN IF L3-SVI State Rmac
vrf1 4001 vx-4001 vlan4001 Up 44:38:39:ff:ff:01
TORC11# show evpn vni 4001 json
{
"vni":4001,
"type":"L3",
"localVtepIp":"36.0.0.11",
"vxlanIntf":"vx-4001",
"sviIntf":"vlan4001",
"state":"Up",
"vrf":"vrf1",
"sysMac":"00:02:00:00:00:2e",
"routerMac":"44:38:39:ff:ff:01",
"vniFilter":"none",
"l2Vnis":[
1000,
]
}
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
macvlan interface up/down event triggers
bgp to send updates for evpn routes
with changed RMAC and nexthop IP values.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
By default announct Self Type-2 routes with
system IP as nexthop and system MAC as
nexthop.
An API to check type-2 is self route via
checking ipv4/ipv6 address from connected interfaces list.
An API to extract RMAC and nexthop for type-2
routes based on advertise-svi-ip knob is enabled.
When advertise-pip is enabled/disabled, trigger type-2
route update. For self type-2 routes to use
anycast or individual (rmac, nexthop) addresses.
Ticket:CM-26190
Reviewed By:
Testing Done:
Enable 'advertise-svi-ip' knob in bgp default instance.
the vrf instance svi ip is advertised with nexthop
as default instance router-id and RMAC as system MAC.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Extract mac-vlan interface mac when a l3vni add is sent to bgp
Per L3VNI maintain vrr interface.
An api to extract vrr mac address from a vlan id, associated
master svi device.
When a l3vni operational up event is sent to bgpd,
extract vrr rmac along with svi rmac.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
edge-2> show evpn vni detail json
{
"vni":79031,
"type":"L3",
...,
...
} <<<<<< no comma
{
"vni":79021,
"type":"L3",
...,
...
} <<<<<< no comma
{
} <<<<<< blank
edge-2>
The fix is to pack json info into json_array before printing it.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
In symmetric routing case for evpn (type-2/type-5)
routes, nexthop and Router mac fields can change from
the originating VTEP.
At the receiving VTEP, bgp path info may points to different
nexthop IP (nh1->nh2) and Remote MAC remain the same.
When the bgp sync the route with nexthop and RMAC fields.
For the exisitng rmac entry update/replace with the new
nexthop (VTEP) IP in remote rmac db in Zebra.
Similarly, bgp path info may points different Router-mac
(RMAC1->RMAC2) and the nexthop value remains the same.
In this case, update to the new RMAC value for the
existing remote nexthop in the Zebra' nexthop cache db.
Ticket:CM-26917
Reviewed By:CCR-9435
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The zvni_map_to_svi function may return NULL as such prevent
a deref and crash. Found via coverity
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a VxLAN interface comes up new vni up event is sent
to bgpd, which triggers bgpd to sync advertise-svi-macip
to zebra. At this point, vni is present but the associated
SVI may not be present.
When SVI comes up, vni add event sent to bgpd (with associated
vrf update). Bgpd already has vni present so
advertise-svi-macip is not synced to Zebra.
To fix,
When advertise-svi-macip flag is synced first time, cache it in
zebra context even though vni associated SVI is not present.
when SVI comes up, interface address add event triggers
new MAC-IP route add to bgpd.
Ticket:CM-26038
Reviewed By:CCR-9254
Testing Done:
Validated via running a sequence of steps in symmetric
routing topology.
- Enable advertise-svi-macip at l2vni level under bgp default
instance (afi/safi, l2vpn/evpn)
- Flap l2vni associated SVI interface.
- Check the output of 'show bgp l2vpn evpn route' command for
MAC-IP route of the SVI's (MAC and IP address).
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Some netlink-facing code used for evpn/vxlan programming was
being run in the dataplane pthread, but accessing zebra core
datastructs. Move some additional data into the dataplane
context, and use it in the netlink path instead.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
