The IPv6 version needs rtm_src_len and rtm_dst_len filled in due to
strict validation. IPv4 also has this requirement, but zebra is running
in non-strict mode there so the kernel accepts it...
Also the table ID hack is IPv4 only.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The multicast routing RTM_GETROUTE command does not use IIF/OIF
attributes, and the IPv6 version will refuse them with an error due to
being new netlink API and thus using strict validation.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These two structs happen to be the same size and have the family field
in the same spot, but the correct one to use here is rtmsg not ndmsg.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
zebra does not care about _notifications_ from the kernel regarding
multicast routing; we only use the MR netlink API to request stats from
the kernel by actively sending a RTM_GETROUTE.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Just some missing ones. Make zebra stop complaining, was getting
some messages from proto2zebra when doing testing, let's clean
that up from happening.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When reading a multipath route and we detect an encoding
error from the kernel( yeah I don't think so either ),
let's tell the operator what happened to that route.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently specific local neighbors (attached to SVIs) are maintatined
in an EVPN specific database. There is a need to maintain L3 neighbors
for other purposes including MAC resolution for PBR nexthops.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Cleanup compile and fix crash
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
When a nexthop is set RTNH_F_LINKDOWN, start noticing
that this flag is set. Allow FRR to know about this
flag but at this point do not do anything with it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The global vrf in zebra is always non-NULL. In general, it is bound to
default vrf by `zebra_vrf_init()`, at other times bound to some specific
vrf. Anyway, non-NULL.
So remove all redundant checkings for the returned value of
`zebra_vrf_get_evpn()`.
Additionally, remove the unnecessary check for `zvrf` in
`zebra_vxlan_cleanup_tables()`.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Modify the structure mcast_route_data to store ipv4/ipv6
addr and lastused multicast information from kernel.
Adjust the related APIs to parse ipv4/ipv6 informations.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Since `NDA_VLAN` is no longer mannually defined in header file,
the check for `NDA_VLAN` should be removed.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Store the fd that corresponds to the appropriate `struct nlsock` and pass
that around in the dplane context instead of the pointer to the nlsock.
Modify the kernel_netlink.c code to store in a hash the `struct nlsock`
with the socket fd as the key.
Why do this? The dataplane context is used to pass around the `struct nlsock`
but the zebra code has a bug where the received buffer for kernel netlink
messages from the kernel is not big enough. So we need to dynamically
grow the receive buffer per socket, instead of having a non-dynamic buffer
that we read into. By passing around the fd we can look up the `struct nlsock`
that will soon have the associated buffer and not have to worry about `const`
issues that will arise.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When using wait for install there exists situations where
zebra will issue several route change operations to the kernel
but end up in a state where we shouldn't be at the end
due to extra data being received. Example:
a) zebra receives from bgp a route change, installs sends the
route to the kernel.
b) zebra receives a route deletion from bgp, removes the
struct route entry and then sends to the kernel a deletion.
c) zebra receives an asynchronous notification that (a) succeeded
but we treat this as a new route.
This is the ships in the night problem. In this case if we receive
notification from the kernel about a route that we know nothing
about and we are not in startup and we are doing asic offload
then we can ignore this update.
Ticket: #2563300
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a operator has a FRR based route installed into the
FIB and a better route comes in from the system. There
is code in the data plane to schedule the batching
and continue processing. But in this case we are done
so we can just return
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Since f60a1188 we store a pointer to the VRF in the interface structure.
There's no need anymore to store a separate vrf_id field.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
With the addition of resillient hashing for nexthops, the
parsing of nexthops requires telling the decoder functions
that there may be nested attributes. This was found by
code inspection of iproute2/ipnexthop.c when trying to
understand resillient hashing as well as statistics
gathering for nexthops that are / will be in upstream
kernels in the near future.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Insist on the fact that zclient neighbor state flags are
mapped over netlink state flags. List all the defines
currently known on kernel, and create a netlink API to
convert netlink values to zclient values. The function is
simplified as it is a 1-1 match.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
FRRouting operator can install seg6 route via ZAPI,
But linux kernel operator also can install seg6 route
via Netlink directry (i.e. iproute2)
This commit make zebra to parse non-frr seg6 route
configuration via netlink and audit Zebra's RIB.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
With this patch, zclient can intall seg6 rotues when
they set properties "nh_seg6_segs" on struct nexthop
and set ZEBRA_FLAG_SEG6_ROUTE on zapi_route's flag.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
FRRouting operator can install seg6local route via ZAPI,
But linux kernel operator also can install seg6local route
via Netlink directry (i.e. iproute2)
This commit make zebra to parse non-frr seg6local
route configuration via netlink and audit Zebra's RIB.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
With this patch, zclient can intall seg6local rotues whem
they set properties nh_seg6local_{action,ctx} on struct nexthop
and set ZEBRA_FLAG_SEG6LOCAL_ROUTE on zapi_route's flag.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
In order to parse the netlink message into the
`struct rtattr *tb[size]` it is assumed that the buffer is
memset to 0 before the parsing. As such if you attempt
to read a value that was not returned in the message
you will not crash when you test for it.
The code has places were we memset it and places where we don't.
This *will* lead to crashes when the kernel changes. In
our parsing routines let's have them memset instead of having
to remember to do it pre pass in to the parser.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
do not add a new route type, and consider 0 as a value meaning
that zebra should be the owner.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
