Create appropriate accessor functions for the rn->lock
data. We should be accessing this data through accessor
functions since it is private data to the data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is the bulk part extracted from "bgpd: Convert from `struct
bgp_node` to `struct bgp_dest`". It should not result in any functional
change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
Modify code to use lookup function agg_node_get_prefix()
as the abstraction layer. When we rework bgp_node to
bgp_dest this will allow us to greatly limit the amount
of work needed to do that.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify more code to use `const struct prefix` throughout
bgp. This is all prep work for adding an accessor function
for bgp_node to get the prefix and reduce all the places that
code needs to be touched when we get that work done.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
bgpd already supports BGP Prefix-SID path attribute and
there are some sub-types of Prefix-SID path attribute.
This commits makes bgpd to support additional sub-types.
sub-Type-4 and sub-Type-5 for construct the VPNv4 SRv6 backend
with vpnv4-unicast address family.
This path attributes is already supported by Ciscos IOS-XR and NX-OS.
Prefix-SID sub-Type-4 and sub-Type-5 is defined on following
IETF-drafts.
Supports(A-part-of):
- https://tools.ietf.org/html/draft-dawra-idr-srv6-vpn-04
- https://tools.ietf.org/html/draft-dawra-idr-srv6-vpn-05
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
We make the assumption that ->attr is not NULL throughout
the code base. We are totally inconsistent about application
of this though.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This diff contains 2 parts:
1. Extract the tunnel type info from bgp extended communities.
2. Make rfapi use this common tunnel type ap
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
The bgp_info data is stored as a void pointer in `struct bgp_node`.
Abstract retrieval of this data and setting of this data
into functions so that in the future we can move around
what is stored in bgp_node.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Other parts of the rfapi code check if the 'rfg->rfapi_import_table'
pointer is NULL or not before using it. Do the same here to fix a crash
detected by the CLI fuzzer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
config.h (or, transitively, zebra.h) must be the first include file
listed for autoconf things like _GNU_SOURCE and _POSIX_C_SOURCE to work
correctly.
Signed-off-by: David Lamparter <equinox@diac24.net>
Switch bgp and ripngd to use the new aggregate table and
route data structures. This was mainly a search and replace
operation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The vrf 2 vrf route leaking auto-derives RD and RT and
installs the routes into the appropriate vpn table.
These routes when a operator configured ipv[4|6] vpn
neighbors were showing up off box. The RD and RT
values choosen are localy significant but globaly
useless and may cause confusion.
Put a special bit of code in to notice that we
should not be advertising these routes off box.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
None of these variables can actually be used before being initialized,
but unfortunately some old compilers are not smart enough to detect that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is a possible buffer overflow.
We should always use the buffer size (whenever possible) to tell
functions what the size of the buffer is, instead of a hardcoded value.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The prefix_rd2str uses a buffer size of RD_ADDRSTRLEN.
Modify the code to consistently use this for all of BGP.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
PREFIX_STRLEN is the correct length for buffers needed to output
a prefix2str. Additionally cleanup some setting of the last
value to a `\0` this is handled by prefix2str.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
VARIABLE tokens must be all uppercase, this allows us to support WORD
tokens that begin with an uppercase letter. The "Null0" keyword is an
example of where this is needed.
The only VARIABLE we had that wasn't already all uppercase was
ASN:nn_or_IP-address:nn
