This command is currently useful only for developers.
Let's hide it to not confuse end users by having both
"show runnning-config" and "show configuration running".
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
This command doesn't rely on transactional CLI and works perfectly for
daemons converted to northbound configuration.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
GNU Readline 8.1 enables bracketed paste by default. This results in
newlines not ending the readline() call, which breaks the ability of
users to paste in configs to vtysh's interactive shell.
Disable bracketed paste.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
* If pathd binary is not found, skip the SR-TE topotests.
* Fix some compilation warnings when pathd is not built.
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
This new dynamic module makes pathd behave as a PCC for dynamic candidate path
using the external library pcpelib https://github.com/volta-networks/pceplib .
The candidate paths defined as dynamic will trigger computation requests to the
configured PCE, and the PCE response will be used to update the policy.
It supports multiple PCE. The one with smaller precedence will be elected
as the master PCE, and only if the connection repeatedly fails, the PCC will
switch to another PCE.
Example of configuration:
segment-routing
traffic-eng
pcep
pce-config CONF
source-address ip 10.10.10.10
sr-draft07
!
pce PCE1
config CONF
address ip 1.1.1.1
!
pce PCE2
config CONF
address ip 2.2.2.2
!
pcc
peer PCE1 precedence 10
peer PCE2 precedence 20
!
!
!
!
Co-authored-by: Brady Johnson <brady@voltanet.io>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Javier Garcia <javier.garcia@voltanet.io>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
This new daemon manages Segment-Routing Traffic-Engineering
(SR-TE) Policies and installs them into zebra. It provides
the usual yang support and vtysh commands to define or change
SR-TE Policies.
In a nutshell SR-TE Policies provide the possibility to steer
traffic through a (possibly dynamic) list of Segment Routing
segments to the endpoint of the policy. This list of segments
is part of a Candidate Path which again belongs to the SR-TE
Policy. SR-TE Policies are uniquely identified by their color
and endpoint. The color can be used to e.g. match BGP
communities on incoming traffic.
There can be multiple Candidate Paths for a single
policy, the active Candidate Path is chosen according to
certain conditions of which the most important is its
preference. Candidate Paths can be explicit (fixed list of
segments) or dynamic (list of segment comes from e.g. PCEP, see
below).
Configuration example:
segment-routing
traffic-eng
segment-list SL
index 10 mpls label 1111
index 20 mpls label 2222
!
policy color 4 endpoint 10.10.10.4
name POL4
binding-sid 104
candidate-path preference 100 name exp explicit segment-list SL
candidate-path preference 200 name dyn dynamic
!
!
!
There is an important connection between dynamic Candidate
Paths and the overall topic of Path Computation. Later on for
pathd a dynamic module will be introduced that is capable
of communicating via the PCEP protocol with a PCE (Path
Computation Element) which again is capable of calculating
paths according to its local TED (Traffic Engineering Database).
This dynamic module will be able to inject the mentioned
dynamic Candidate Paths into pathd based on calculated paths
from a PCE.
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-policy-06
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
As code comment states, 1 count of MTYPE_COMPLETION is leaked for each
autocompleted token. Let's manually decrement the counter before passing
the pointer to readline.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We should not prepend "do" when executing commands from the view node,
because view node doesn't support "do" shortcut.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Two vtysh nodes were misplaced during a recent refactor and were not
included under appropriate #ifdef directives and consequently triggered
build warnings (errors)
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
1. Added isis with different vrf and it's dependecies.
2. Added new vrf leaf in yang.
3. A minor change for IF_DOWN_FROM_Z passing argrument is
replaced with ifp pointer in api "isis_if_delete_hook()".
4. Minor fix in the isisd spf unit test.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
... to skip the "Building configuration..." header that gets in the way
of automated processing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit d741915ecd.
This is because it breaks this behavior:
router ospf6
<commands>
!
int enp39s0
<more commands>
!
This is a very legal set of commands and completely destroys the
ability to do this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
This removes a warning when ENOENT is returned while backing up the
config. This also provides strerror when backup fails for other reasons.
Signed-off-by: Trey Aspelund <taspelund@cumulusnetworks.com>
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a 'copy' cli that reads a file into the current running
config. Add an entry about the new cli to the user doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use an alias for the daemons who process the nexthop-group
config cli; makes it easier to expand that list in the future.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
instead of suppressing the 'exit' markers at the end of each
'interface XXX' clause in the mpls ldp configuration, mark
those with a special marker 'exit-ldp-if' and teach the
reload script to correctly recognize the new sub-subcontext
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
frr-reload.py has many special case rules that did not consider ldpd
at all. Specifically:
1. The bulk of ldp configuration comes in a big 'mpls ldp' context, which was
previously considered a single-line context as it started with 'mpls'. This
rule should only apply to labels and lsps.
2. ldp has a 'router-id' config line that fell into the same rule as the above
one. It should not be considered a single-line context as more ldp
configuration can follow.
3. enabled interfaces should not end their context. A better fix
would actually require popping a new context for each interface
in case there is any interface-specific config, but at least this
fix will address the most common use case.
4. when declaring pseudowires, any line with 'member pseudowire XXX' should
be considered a sub-context of the 'l2vpn YYY type ZZZ' context. Without
this fix, changes in the first psuedowire declared would not correctly
be processed (e.g. removing a 'control-word exclude' line would not
be picked up).
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Guard the libyang debug messages under this command so that only
people interested on those messages will see them.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
getrusage, in a heavily stressed system, can account for
signficant running time due to process switching to the kernel.
Allow the end-operator to specify `--disable-cpu-time` to
avoid this call. Additionally we cause `show thread cpu` to
not show up if this is selected.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The right way to implement this command in vtysh is the following:
* Send the command to each running FRR daemon;
* Collect the command output from each daemon;
* Parse the text outputs into libyang lyd_node structures. Then merge
all these data trees into a single one. Finally, print the merged
data trees to the standard output (libyang will take care of
combining duplicate nodes as necessary).
What this commit does is to allow vtysh to send the "show yang
operational-data" command to a single daemon only (the last
parameter). It's a quick workaround to allow us to write topotests
using YANG-modeled data until we do the real thing (full vtysh
northbound integration).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This command is defined in the lib/northbound_cli.c file, which
is not being parsed by vtysh since most commands from there need
special handling in the context of vtysh. The "debug northbound"
command, however, can be made available to vtysh without problems.
Introduce a new DEFUNSH to do that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This implements BMP. There's no fine-grained history here, the non-BMP
preparations are already split out from here so all that remains is BMP
proper.
Signed-off-by: David Lamparter <equinox@diac24.net>
Couple code paths end up trying to dereference vty->of which can be null
in one special case.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add the ability to parse `router eigrp AS [vrf NAME]` and
modify eigrp_lookup to actually handle a vrf_id for us.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The correct cast for these is (unsigned char), because "char" could be
signed and thus have some negative value. isalpha & co. expect an int
arg that is positive, i.e. 0-255. So we need to cast to (unsigned char)
when calling any of these.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
VRF context blocks have a context-specific exit command in order to
explicitly force an exit to the top level config node. This command
exists because 'ip route' commands are accepted in both VRF_NODE and
CONFIG_NODE, so static routes intended to be accepted in CONFIG_NODE
that immediately follow a VRF_NODE block will be shoved into the
VRF_NODE block unless the VRF context is explicitly exited.
However, because this is a command that exits to CONFIG_NODE, vtysh -m
should be printing an `end` at the end of the context, since
frr-reload.py relies on this context ender to know when it's back in
CONFIG_NODE. But since this is the only explicit context exit command
that also exits to CONFIG_NODE we don't really have a good way of doing
this already. Hence this god-awful patch.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Use %% style for errors in log commands and switch
tabs to a single space in output. Also, remove un-needed
output for success.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add vtysh commands to add/del/clear/show filters across
all daemons and independently on each one. Add automake and
clippy boilerplate for those commands as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Update show work-queue to use the execute_name() code
path when dispatching to a specific daemon.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add static function path for exectuting a command
on a client daemon via a string of its name only.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Although the RFC states hostname length should be < 255 chars,
FRR allows infinite length technically. However, when you try
to set a hostname > 80 chars, you would immediately notice a crash.
RCA: Crash due to buffer overflow. Large buffer sprintf'd into smaller
buffer. Usage of sprintf function instead of snprintf which is safer.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
* Change 'begins_with' to 'frrstr_startswith' for consistency
* Add suffix checker, frrstr_endswith()
* Update vtysh to use the new function
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Merge commit to solve a bunch of conflicts with other PRs that were
merged in the previous weeks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
I just straight up forgot checking VTYSH_PAGER at startup, and the
"terminal paginate" command is only installed to VIEW_NODE so it can't
be processed from vtysh.conf in CONFIG_NODE...
Signed-off-by: David Lamparter <equinox@diac24.net>
