vtysh_client_execute() expects just a string without a newline; the
newline is passed through and ends up in logging output where newlines
are not quite wanted.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The vtysh live logs don't try to buffer messages when vtysh isn't
reading them fast enough. Either the kernel has space and can accept
messages without delay, or it doesn't and we continue on.
While this is intentional (otherwise slow vtysh could block a routing
daemon), at least give the user an indication if messages were dropped.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add the ability to inspect the timers and when they will pop
per daemon:
sharpd@eva ~/frr (thread_return_null)> vtysh -c "show thread timers"
Thread timers for zebra:
Showing timers for default
--------------------------
rtadv_timer 00:00:00.520
if_zebra_speed_update 00:00:02.745
if_zebra_speed_update 00:00:02.745
if_zebra_speed_update 00:00:02.745
if_zebra_speed_update 00:00:02.745
if_zebra_speed_update 00:00:02.745
if_zebra_speed_update 00:00:02.745
if_zebra_speed_update 00:00:02.746
if_zebra_speed_update 00:00:02.744
if_zebra_speed_update 00:00:02.745
Showing timers for Zebra dplane thread
--------------------------------------
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
i.e. to whoever cares, since some unique IDs (from libfrr) are valid
everywhere but some others (from the daemons) only apply to specific
daemons.
(Default handling aborts on first error, so configuring any unique IDs
that don't exist on the first daemon vtysh connects to just failed
before this.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
After `<daemon_name> is not running` message vtysh does not return
error. For example if you disable ospf in `/etc/frr/daemons` and run
`vtysh -c configure -c "router ospf"` it prints the message to stderr,
but returns 0.
This commit will make vtysh return error when not in interractive mode.
But if you run commands from vtysh, you will still be able to enter
views and exit them if daemon is not running.
Signed-off-by: Yaroslav Fedoriachenko <yar.fed99@gmail.com>
No need to have special processing for every single node. Just always
use "exit" the necessary number of times - it works for all nodes.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
"[no] netns NAME" commands are part of the lib, but they are actually
zebra-only:
- they are using vrf_netns_handler_create and its description clearly
says that it "should be called from zebra only"
- vtysh sends these commands only to zebra
- only zebra outputs the netns related config
- zebra notifies other daemons about netns attachment
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
pce-config, pce and pcc node-entering commands in vtysh include no-form,
which is incorrect. Currently, when user passes a no-form command like
`no pcc`, vtysh enters the node while pathd deletes the node and this
leads to a desynchronization.
Regular and no-form commands should be defined separately to fix this.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Recent change in d1b287e only fixed the problem for 3-letter words.
We were still displaying error for longer words starting with "ena":
```
nfware> enac
% Command not allowed: enable
nfware> enad
% Command not allowed: enable
nfware> enaena
% Command not allowed: enable
```
If we don't allow "enable" command in user mode, why add it at all?
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
vtysh was unable to distinguish between end and ena. The
code can now do so:
sharpd@eva ~/frr5 (master)> sudo vtysh/vtysh -u sharpd
Hello, this is FRRouting (version 8.1-dev).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
eva> e
% Ambiguous command: e
eva> en
% Command not allowed: enable
eva> ena
% Command not allowed: enable
eva> enab
% Command not allowed: enable
eva> enabl
% Command not allowed: enable
eva> enable
% Command not allowed: enable
eva> enb
% Unknown command: enb
eva> enc
% Unknown command: enc
eva> end
% Unknown command: end
eva> ene
% Unknown command: ene
eva> quit
Fixes: #2296
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When exiting from link-params and pseudowire nodes, we were sending exit
command to all VTYSH_INTERFACE daemons. This led to a desynchronized
state in vtysh and daemons other then zebra. We must send exit command
only to zebra.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Example output:
flk# show version
% 2021/06/29 00:25:01.562
FRRouting 8.1-dev-my-manual-build (flk).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
...
Signed-off-by: Christian Hopps <chopps@labn.net>
...really no reason to force this into a compile time decision. The
only point is avoiding the getrusage() syscall, which can easily be a
runtime decision.
[v2: also split cputime & walltime limits]
Signed-off-by: David Lamparter <equinox@diac24.net>
The SR node is hidden by a `--enable-pathd` configuration option.
But the recent commit of SRv6 uses this node as well. Let's expose
this node and let things work.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This commit is a part of #5853 that add new cmd-node for SRv6 configuration.
This commit just add cmd-node and moving node cli only, acutual SRv6 config
command isn't added. (that is added later commit. of this branch)
new cli nodes:
* SRv6
* SRv6-locators
* SRv6-locator
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
