Try to untangle some spaghetti...
This is an 1:1 change that should not result in any functional
difference.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Adding the file pim6_cmd.h and pim6d_cmd.c as the base changes
for implementing the CLI changes
Removed the pim_cmd_init from the stub file.
Co-authored-by: Sarita Patra <saritap@vmware.com>
Co-authored-by: Abhishek N R <abnr@vmware.com>
Co-authored-by: Sai Gomathi N <nsaigomathi@vmware.com>
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
This creates `pim6_stubs.c`, which is intended to temporarily provide
stubbed-out definitions of some functions we don't have yet for IPv6.
This makes pim6d compile without the `PIM_V6_TEMP_BREAK` hack, and is
very important as an intermediate step to get a working environment for
further work.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Renamed frr-igmp.yang to frr-gmp.yang, igmp to gmp container.
to support IGMP and MLD protocol.
frr-gmp.yang, created a list of address family under mgmd
container. For PIMV4 the key is IPV4, where as for PIMV6
the key is IPV6. This is done for PIMV6 development.
This commit will have all the northbound changes to support
IPV4 address family.
Signed-off-by: sarita patra <saritap@vmware.com>
Just putting the infrastructure in place and having it disabled is
actually good progress here; have the compiler make itself useful and
tell us what we have to do to get the basics right.
(The next commit will cause a *lot* of compile errors as soon as
`PIM_V6_TEMP_BREAK` is set; but there is no reason to force everything
into a single step here.)
To enable `pim_addr = in6_addr`, run `make PIM_V6_TEMP_BREAK=1` (remove
previous compile results with `rm pimd/pim6d-*.o`)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Depending on whether we're compiling pimd or pim6d, these types take on
the appropriate AF being used.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This newborn pim6d is essentially an empty husk, but it does build
without warnings or errors and has the build system integration prepared
and working.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These really serve no purpose other than slowing our build down. If
there's a benefit to any of these, they can be readded.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Most of these are many, many years out of date. All of them vary
randomly in quality. They show up by default in packages where they
aren't really useful now that we use integrated config. Remove them.
The useful ones have been moved to the docs.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
The pim_version.[c|h] files are never used and we are getting
warnings about PIM_VERSION changing pointer sizes from
newer versions of the compiler. I see no reason to keep this
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Move pim and igmp yang files registery to appropriate makefiles.
In yang directory makefile move under `PIMD`
Remove pimd yang files from library makefile instead move them
to pimd makefile.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
These are easy to get subtly wrong, and doing so can cause
nondeterministic failures when racing in parallel builds.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There was some code missed during the upstreaming process
due to code squash. Identify and put into a commit
to keep code consistent and correct.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The vrrpd one conflicts with the standalone vrrpd package; also we're
installing daemons to /usr/lib/frr on some systems so they're not on
PATH.
Signed-off-by: David Lamparter <equinox@diac24.net>
when ever a FRR Client wants to send any data to another node
using MLAG Channel, uses below mechanisam.
1. sends a MLAG Registration to zebra with interested messages that
it is intended to receive from peer.
2. In response to this request, Zebra opens communication channel with
MLAG. and also in Rx. diretion zebra forwards only those messages which
client shown interest during registration
3. when client is no-longer interested in communicating with MLAG, client
posts De-register to Zebra
4. if this is the last client which is interested for MLAG Communication,
zebra closes the channel.
why PIM Needs MLAG Communication
================================
1. In general on LAN Networks elecetd DR will send the Join towards
Multicast RP in case of a LHR and Register in case of FHR.
2. But in case DR Goes down, traffic will be re-converged only after
the New DR is elected, but this can take time based on Hold Timer to
detect the DR down.
3. this can be optimised by using MLAG Mecganisam.
4. and also Traffic can be forwarded more efficiently by knowing the cost
towards RP using MLAG
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
when ever a FRR Client wants to send any data to another node
using MLAG Channel, uses below mechanisam.
1. sends a MLAG Registration to zebra with interested messages that
it is intended to receive from peer.
2. In response to this request, Zebra opens communication channel with
MLAG. and also in Rx. diretion zebra forwards only those messages which
client shown interest during registration
3. when client is no-longer interested in communicating with MLAG, client
posts De-register to Zebra
4. if this is the last client which is interested for MLAG Communication,
zebra closes the channel.
why PIM Needs MLAG Communication
================================
1. In general on LAN Networks elecetd DR will send the Join towards
Multicast RP in case of a LHR and Register in case of FHR.
2. But in case DR Goes down, traffic will be re-converged only after
the New DR is elected, but this can take time based on Hold Timer to
detect the DR down.
3. this can be optimised by using MLAG Mecganisam.
4. and also Traffic can be forwarded more efficiently by knowing the cost
towards RP using MLAG
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Apart from datastructure, bsm scope initialization and deinitialiation
routines called during pim instance init and deinit. Also makefile changes.
Signed-off-by: Saravanan K <saravanank@vmware.com>
These entries will be used over the subsequent commits for
1. vxlan-tunnel-termination handling - setup MDT to rx VxLAN encapsulated
BUM traffic.
2. vxlan-tunnel-origination handling - register local-vtep-ip as a
multicast source.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add a command to track if an interface should be in active-active
mode or not. This command is hidden at this time because it
is not finished fully.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
This commit is the implementation of weak multicast traceroute.
It consists of IGMP module dealing with mtrace type IGMP messages
and client program mtrace/mtracebis for initiating mtrace queries.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
