EVPN route's extended community include
important informations like Mobility sequence,
router mac, and RT values, include the ecomm
in evpn brief output.
Ticket:CM-25353
Testing Done:
Validated in evpn deployment with routes.
TOR#show bgp l2vpn evpn route
...
Network Next Hop Metric LocPrf Weight Path
Extended Community
Route Distinguisher: 27.0.0.11:3
*> [2]:[0]:[0]:[48]:[00:02:00:00:00:04]:[128]:[fe80::202:ff:fe00:4]
36.0.0.11 0 4435 5546 i
RT:5546:1008 ET:8 ND:Router Flag
* [2]:[0]:[0]:[48]:[00:02:00:00:00:36]
36.0.0.11 0 4435 5546 i
RT:5546:1008 RT:5546:4003 ET:8 MM:0, sticky MAC Rmac:44:38:39:ff:ff:01
*> [2]:[0]:[0]:[48]:[00:02:00:00:00:36]
36.0.0.11 0 4435 5546 i
RT:5546:1008 RT:5546:4003 ET:8 MM:0, sticky MAC Rmac:44:38:39:ff:ff:01
* [3]:[0]:[32]:[36.0.0.11]
36.0.0.11 0 4435 5546 i
RT:5546:1008 ET:8
*> [3]:[0]:[32]:[36.0.0.11]
36.0.0.11 0 4435 5546 i
RT:5546:1008 ET:8
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
There exists a state where we may have a rd node but no individual
evpn prefix nodes in the two level table:
(gdb) bt
at bgpd/bgp_evpn_vty.c:1190
filter=FILTER_RELAXED) at lib/command.c:1060
at lib/command.c:1119
vtysh=vtysh@entry=0) at lib/command.c:1273
(gdb) f 5
at bgpd/bgp_evpn_vty.c:1190
1190 bgpd/bgp_evpn_vty.c: No such file or directory.
(gdb) p buf
$1 = "[2]:[0]:[48]:[00:00:00:00:00:00]", '\000' <repeats 240 times>...
(gdb) p json_nroute
$2 = (json_object *) 0x0
(gdb) p rd_header
$3 = 1
(gdb) p buf
$4 = "[2]:[0]:[48]:[00:00:00:00:00:00]", '\000' <repeats 240 times>...
(gdb)
I'm not entirely sure that this is not a `different` problem in that the
rd node should have been removed. But I think preventing the crash
in a show command is probably the right thing to do here.
Fixes: #4501
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Instead of just passing in the prefix, pass in the particular
bgp_node we are using.
This is setup for a future commit to use this data.
The long term goal is to collect data about why
a particular bgp_path_info was selected as best and
to display that reason.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Bug: If there are 2 different prefixes under an rd, the
output of "show bgp l2vpn evpn json" would print only one of the
prefixes.
RCA: prefix info was added to the json_object once per rd. Hence,
prefix and rd were added just once, as the loop iterated over all
the prefixes and paths.
This is related to my earlier commit that went in via PR 4283:
https://github.com/FRRouting/frr/pull/4283
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
The vpn variable in bgp_evpn_advertise_svi_ip_vni must
be non-null as such it is impossible to ever need the
!vpn test case.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If PIM-SM if used for BUM flooding the multicast group address can be
configured per-vxlan-device. BGP receives this config from zebra via
the L2 VNI add/update.
Sample output -
root@TORS1:~# vtysh -c "show bgp l2vpn evpn vni 1000" |grep Mcast
Mcast group: 239.1.1.100
root@TORS1:~#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This command is added to provide detailed information. It will be
useful in troubleshooting as we will be able to dump all detailed info
using a single command.
"show bgp l2vpn evpn route [detail] ...". Additional filtering
can be done by providing type of the route.
Command will display the detailed content for all rd and macs-ip as
displayed by "show bgp l2vpn evpn route rd <> mac <>" for a single
rd, mac, ip from the global bgp routing table.
Ticket: CM-24397
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by:
Testing-Done:
This command is added to provide detailed information. It will be
useful in troubleshooting as we will be able to dump all detailed info
using a single command.
"net show bgp evpn route vni <all|id> [detail]". Additional filtering
can be done by providing vtep ip.
Command will display the detailed content for all vni and macs as
displayed by "net show bgp evpn route vni <> mac <> ip <>" for a single
vni, mac, ip.
Ticket: CM-24397
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by:
Testing-Done:
This replaces manual checks of the flag with a wrapper macro to convey
the meaning "is evpn enabled on this vrf?"
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
During L3VNI add, non-default RD value is not replayed
correctly. Instead of picking non-default value it picks
up auto RD value which is derived based on router-id.
Indentation issue: Remove additional space from
L3VNI running config output.
Ticket:CM-24320
Reviewed By:CCR-8437
Testing Done:
Bring up evpn configuration with L3vni up with non-default
RD value, perform peerlink flap, l3vni flap which removes
all VNIS and readds with RD and RT values.
The configured RD and RTs are replayed.
Post L3VNI flap
router bgp 5546 vrf vrf2
!
address-family l2vpn evpn
rd 45.0.66.2:6
route-target import 20001:1
route-target export 20001:1
exit-address-family
TORC11# show bgp l2vpn evpn vni 4002
VNI: 4002 (known to the kernel)
Type: L3
Tenant VRF: vrf2
RD: 45.0.66.2:6
Originator IP: 36.0.0.11
Advertise-gw-macip : n/a
Import Route Target:
20001:1
Export Route Target:
20001:1
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Rename {bgp,zvrf}_def{ault} to {bgp,zvrf}_evpn where it makes sense,
i.e. when they contain the EVPN instance.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
If the EVPN VRF is not the default one (i.e. with advertise-all-vni),
this allows showing its information with `show bgp l2evpn evpn ...`
commands. They do not require adding `vrf VRFNAME` since we only
support a single EVPN VRF. The same is true for zebra-specific commands
(e.g. `show evpn ...`).
Configuration commands are not restricted to the default VRF but to
the EVPN one, that is to the one bearing `advertise-all-vni`.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
This makes the instance bearing the advertise-all-vni config option
register to zebra as the EVPN one, forwarding it the option.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
After a router reboot the L3 network via it converges before the L2
network. This is because MLAG intentionally holds down bridge-access
and vxlan-network ports for some time (MLAG init-delay) to prevent traffic
from switching to a router that is not fully ready. This also means that
routes (from vrf-peering sessions) that qualify for evpn type-5
advertisments are available long before the L3-VNI is available for that
tenant VRF. In these windows bgpd was adding these evpn-type-5 routes with
a L3-VNI of 0 (which was not fixed up after the L3-VNI became available) -
BGP routing table entry for 100.0.0.1:2:[5]:[0]:[0]:[32]:[200.1.1.1]
Paths: (1 available, best #1)
Advertised to non peer-group peers:
MSP1(uplink-1) MSP2(uplink-2)
Route [5]:[0]:[0]:[32]:[200.1.1.1] VNI 0 >>>>>>>>
65001 65535
36.0.0.9 from 0.0.0.0 (27.0.0.9)
Origin incomplete, metric 0, valid, sourced, local, bestpath-from-AS 65001, best
Extended Community: ET:8 RT:5544:4001 Rmac:44:38:39:ff:ff:01
AddPath ID: RX 0, TX 327
Last update: Wed Feb 27 18:37:10 2019
Fix is to defer creating type-5 routes till the L3-VNI is available for
that tenant VRF (this was already being done for most cases; fixup takes
care of some that missed the check).
Ticket: CM-24022
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Made changes and updated the routemap applied counter in the following flows.
1.Increment when route map attached to a list.
2.Decrement when route map removed / modified from a list.
3.Increment/decrement when route map create/delete callback triggered.
4.Besides ,This counter need not be updated when a route map is got updated.
i.e changing/adding a match value to the existing routemap.
In BGP , same update api called for all three add/delete/update operation .
But this counter have to be updated only for routemap addition.
Addressed this specific change by identifying the routemap operation based
on routemap pointer.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
Certain EVPN configuartions should only be applied
under DEFAULT VRF bgpd instance.
reject the cli for non default bgp instance
Ticket:CM-18950
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
During L3VNI add delete, configured non-default
route-target is not replayed correctly.
Non-default route-target should only be deleted
during unconfiguring under bgp vrf instance,
during delete of l3vni only unmap from the VRF.
during addition of l3vni map back to the VRF
Ticket:CM-21482
Testing Done:
Bring up evpn configuration with L3vni up with
non-default route-target.
Perform delete/add of L3vni and validated non-default
route-target is mapped back to vrf.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When "default-originate ipv4" is configured, a type-5 route is installed in
the local node and advertised to the peer with auto-rd.
When the above was followed by configuring an RD in IP VRF, Type-5 are
generated for only the non-default routes.
Fixed this issue by withdrawing the default route with auto-rd and advertising
the route with confiured RD.
Signed-off-by: Kishore Aramalla karamalla@vmware.com
When a VNI is unconfigured it deletes all of its import and export
route-targets. There is a export route-target link list and import
route-target linked list. There are redudant loops in the
route-target deletion code. In the first iteration it deleted the
route-target and freed the RT node, but not list node.
In the 2nd iteration it tries to free the RT node again, resulting in
the double free of RT node.
Signed-off-by: "Kishore Aramalla karamallavmware.com"
Duplicate address detection configuration clis
under bgp l2vpn evpn config mode.
- Enabled/Disable (global knob) for feature.
- Configure cli for duplicate detection action
freeze and freze until time (auto-recovery).
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The bgp_info data is stored as a void pointer in `struct bgp_node`.
Abstract retrieval of this data and setting of this data
into functions so that in the future we can move around
what is stored in bgp_node.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the '[no] flood <disable|head-end-replication>' command
to the l2vpn evpn afi/safi sub commands for bgp. This command
when entered as 'flood disable' will turn off type 3 route
generation for the transmittal of the type 3 route necessary
for BUM replication on the remote VTEP. Additionally it will
turn off the BUM handling via the new zebra command,
ZEBRA_VXLAN_FLOOD_CONTROL.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Scan all bgp vrf instances and respective L3VNI against the VNI which is being configured.
Ticket:CM-21859
Testing Done:
Configure l3vni,
try to configure same vni as l2vni under router bgp, address-family
l2vpn evpn.
The configuration is rejected.
show evpn vni
VNI Type VxLAN IF # MACs # ARPs # Remote VTEPs Tenant VRF
4001 L3 vx-4001 0 0 n/a vrf1
TOR(config)# router bgp 5546
TOR(config-router)# address-family l2vpn evpn
TOR(config-router-af)# vni 4001
% Failed to create VNI
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
In order to make EVPN behavior work without special casing
the code, bring the evpn commands under HAVE_CUMULUS into
the fold.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When bgp vrf is configured with non-default
RD value, config flag is set.
Upon removing non-default RD value the flag was not reset,
thus displayed default RD value in running-config.
router bgp 5550 vrf vrf1
rd 45.0.2.2:5
Unset the RD configuration flag under bgp_vrf instance.
Ticket:CM-20206
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
L2VNI route-distinguisher and route-target configuartions
should only applied under DEFAULT VRF bgpd instance.
Add newline to each vni display.
router bgp 65006
address-family l2vpn evpn
vni 1000101
route-target import 1:1000101
do not allow under
router bgp 65006 vrf RED
Ticket:CM-20204
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
We enable/disable type-5 routes by following commands:
advertise ipv4 unicast [route-map <route-map>]
advertise ipv6 commands [route-map <route-map>]
the route-map part was writtem to conf file.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
no advertise ipv6 unicast command should unset the corresponding
af_flag in bgp_vrf rather than the vrf_flags.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Display the table version for EVPN routes like it is done for other
address families. Note that this is really relevant only for the
per-VNI routing table.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-12903
RFC 8635 explains how RT auto-derivation should be done in section
5.1.2.1 [1]. In addition to encoding the VNI in the lowest bytes, a
3-bit field is used to encode a namespace. For VXLAN, we have to put 1
in this field. This is needed for proper interoperability with RT
auto-derivation in JunOS. Since this would break existing setup, an
additional option, "autort rfc8365-compatible" is used.
[1]: https://tools.ietf.org/html/rfc8365#section-5.1.2.1
Signed-off-by: Vincent Bernat <vincent@bernat.im>
We have changed the flow in which we advertise the VNI subnet.
We will mark this command as hidden for all future purposes.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ethernet Tag ID (ETI) is part of the prefix. It cannot just be ignored
as it needs to be used when checking for prefix uniqueness. Moreover,
when using Quagga as a route reflector, we need to keep its
value. Therefore, we correctly parse and encode it. We also parse
ESI. While not part of the prefix, it needs to be reflected correctly
by Quagga.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Implement support for EVPN symmetric routing for IPv6 routes. The next hop
for EVPN routes is the IP address of the remote VTEP which is only an IPv4
address. This means that for IPv6 symmetric routing, there will be IPv6
destinations with IPv4 next hops. To make this work, the IPv4 next hops are
converted into IPv4-mapped IPv6 addresses.
As part of support, ensure that "L3" route-targets are not announced with
IPv6 link-local addresses so that they won't be installed in the routing
table.
Signed-off-by: Vivek Venkatraman vivek@cumulusnetworks.com
Reviewed-by: Mitesh Kanjariya mitesh@cumulusnetworks.com
Reviewed-by: Donald Sharp sharpd@cumulusnetworks.com
When a non-default vrf rd is configured under l2vpn evpn in a vrf,
we need to update the config file.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Implement support for 'default-originate' for L2VPN/EVPN address family.
This is needed for the case where external routing within a POD,
will follow the default route to the border/exit leaf.
The border leaf has more than one next hop to forward the packet on to,
depending on the destination IP.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
We have af_flags in struct bgp to hold address family related flags,
l2vpn evpn flags to indicate advertise ipvX unicast should be moved there.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Type-5 routes can be useful in multiple scenarios such as advertise-subnet,
default-originate etc. Currently, the code has a restriction that to allow
advertising type-5 routes, user has to first enable advertise ipvX command.
This restriction is not necessary and should be removed.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The value 'pnt' was being set but never used. If we need
this in the future it will be a simple thing to add back
in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
FRR/CL provides the means for injecting regular (IPv4) routes
from the BGP RIB into EVPN as type-5 routes.
This needs to be enhanced to allow selective injection.
This can be achieved by adding a route-map option
for the "advertise ipv4/ipv6 unicast" command.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Asymmetric routing is an ideal choice when all VLANs are cfged on all leafs.
It simplifies the routing configuration and
eliminates potential need for advertising subnet routes.
However, we need to reach the Internet or global destinations
or to do subnet-based routing between PODs or DCs.
This requires EVPN type-5 routes but those routes require L3 VNI configuration.
This task is to support EVPN type-5 routes for prefix-based routing in
conjunction with asymmetric routing within the POD/DC.
It is done by providing an option to use the L3 VNI only for prefix routes,
so that type-2 routes (host routes) will only use the L2 VNI.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
We bail in the command if no l2vnis are present.
This is incorrect as we now print both l2 and l3 vnis together.
Ticket: CM-19022
Review: Trivial
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
0. move all global EVPN details to 'show evpn [json]' command
1. change "VRF" to "Tenant VRF" in 'show evpn vni'
2. change 'show vrf vni' command to tabular form
and add l3-vni related params to the output
3. show evpn rmac should show refcount only in detailed output
4. show evpn next-hop should show refcount only in detailed output
5. move VRF in 'show evpn l3vni' to the end
6. add num rmacs and num nexthops to show evpn l3vni
7. remove "info" from 'show bgp vrf <> l3vni info'
8. show evpn vni <vni> should show l2vni details or l3 vni details
9. show evpn vni should show both L2 and L3 VNIs
10. show bgp l2vpn evpn - shows all global bgp l2vpn evpn details
11. show bgp l2vpn evpn vni - will show both l2 and l3 vnis
12. show bgp l2vpn evpn vni - should show both l2 and l3 vnis
13. follow camel notation for all json keys
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
In EVPN symmetric routing, not all subnets are presents everywhere.
We have multiple scenarios where a host might not get learned locally.
1. GARP miss
2. SVI down/up
3. Silent host
We need a mechanism to resolve such hosts. In order to achieve this,
we will be advertising a subnet route from a box and that box will help
in resolving the ARP to such hosts.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
- used @sharpd's slack patch as a starting point
- fixes compile time issue, but code path not tested
Signed-off-by: Raymond P. Burkholder <github@oneunified.net>
CLI config for enabling/disabling type-5 routes
router bgp <as> vrf <vrf>
address-family l2vpn evpn
[no] advertise <ipv4|ipv6|both>
loop through all the routes in VRF instance and advertise/withdraw
all ip routes as type-5 routes in default instance.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
For EVPN type-5 route the NH in the NLRI is set to the local tunnel ip.
This information has to be obtained from kernel notification.
We need to pass this info from zebra to bgp in l3vni call flow.
This patch doesn't handle the tunnel-ip change.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
1. VRF RD can be auto-derived (simillar to RD for a VNI)
2. VRF RD can be configured manually through a config
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The prefix_rd2str uses a buffer size of RD_ADDRSTRLEN.
Modify the code to consistently use this for all of BGP.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Incomplete commands like "debug ospf6 route mem" were being ignored. The
changes in ripd and ripngd are intended to make the code easier to read,
no bugs were fixed in these two daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
VARIABLE tokens must be all uppercase, this allows us to support WORD
tokens that begin with an uppercase letter. The "Null0" keyword is an
example of where this is needed.
The only VARIABLE we had that wasn't already all uppercase was
ASN:nn_or_IP-address:nn
I am merely fixing the compiler warning. I do not
understand what the as value should be for output
to the end user or where it should be retrieved
from.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some of this was so egregiously stupid, I couldn't look at it without
gouging my eyes out...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
afi_header_vty_out() is easily replaced with vty_frame(), which means we
can drop a whole batch of "int *write" args as well as the entirety of
bgp_config_write_family_header().
=> AFI/SAFI config writing is now a lot simpler.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When the MAC changes for a local neighbor, ensure that the neighbor data
structure as well as the link between the neighbor and MAC data structures
is updated correctly.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-17565
Reviewed By: CCR-6605
Testing Done: Manual, evpn-smoke
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
