Absolutely not possible to read the output and even distinguish the prefix
we are looking for.
Before:
```
donatas-pc# show ip bgp detail
BGP table version is 12, local router ID is 192.168.10.17, vrf id 0
Default local pref 100, local AS 65002
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
65001
2a02:4780:abc::2 from 2a02:4780:abc::2 (200.200.200.202)
(fe80::a00:27ff:fe5e:d19e) (used)
Origin incomplete, metric 0, valid, external, multipath
Last update: Tue Dec 13 22:53:16 2022
65001
192.168.10.124 from 192.168.10.124 (200.200.200.202)
Origin incomplete, metric 0, valid, external, otc 65001, multipath, best (Neighbor IP)
Last update: Tue Dec 13 22:53:16 2022
65001
2a02:4780:abc::2 from 2a02:4780:abc::2 (200.200.200.202)
(fe80::a00:27ff:fe5e:d19e) (used)
Origin IGP, metric 0, valid, external, multipath
Last update: Tue Dec 13 22:53:16 2022
65001
192.168.10.124 from 192.168.10.124 (200.200.200.202)
Origin IGP, metric 0, valid, external, otc 65001, multipath, best (Neighbor IP)
Last update: Tue Dec 13 22:53:16 2022
```
After:
```
donatas-pc# show ip bgp detail
BGP table version is 12, local router ID is 192.168.10.17, vrf id 0
Default local pref 100, local AS 65002
BGP routing table entry for 10.0.2.0/24, version 1
Paths: (2 available, best #2, table default)
Advertised to non peer-group peers:
2a02:4780:abc::2
65001
2a02:4780:abc::2 from 2a02:4780:abc::2 (200.200.200.202)
(fe80::a00:27ff:fe5e:d19e) (used)
Origin incomplete, metric 0, valid, external, multipath
Last update: Tue Dec 13 22:47:16 2022
BGP routing table entry for 10.0.2.0/24, version 1
Paths: (2 available, best #2, table default)
Advertised to non peer-group peers:
2a02:4780:abc::2
65001
192.168.10.124 from 192.168.10.124 (200.200.200.202)
Origin incomplete, metric 0, valid, external, otc 65001, multipath, best (Neighbor IP)
Last update: Tue Dec 13 22:47:16 2022
BGP routing table entry for 10.10.100.0/24, version 2
Paths: (2 available, best #2, table default)
Advertised to non peer-group peers:
2a02:4780:abc::2
65001
2a02:4780:abc::2 from 2a02:4780:abc::2 (200.200.200.202)
(fe80::a00:27ff:fe5e:d19e) (used)
Origin IGP, metric 0, valid, external, multipath
Last update: Tue Dec 13 22:47:16 2022
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Zebra has a shutdown setup where it asks the dplane to shutdown but can
still be processing data. This is especially true if something the dplane
is listening on receives data that will be processed by the main dplane thread
from netlink. When zebra_finalize is called it is possible that a bit
of data comes in before the zebra_dplane_shutdown() function is called
and the memory freed in ns_walk_func() causes the main dplane event
to crash when it cannot find the ns data anymore.
Reverse the order, stop the zebra dplane pthread and then free the
memory associated with the namespaces.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The wrong parameter is passed in `inet_ntop()` of `zfpm_log_route_info()` in
old fpm module, so the display of gateway is always wrong. Just remove
that extra ampersand.
Additionally, use "none" as gateway value for the case of no gateway.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
I am seeing this output:
2022/12/16 09:16:00.206 BGP: [MNE5N-K0G4Z] Resetting peer (null) due to change in addpath config
Switch over to %pBP
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The function bgp_packet_mpattr_prefix was using an if statement
to encode packets to the peer. Change it to a switch and make
it handle all the cases and fail appropriately when something
has gone wrong. Hopefully in the future when a new afi/safi
is added we can catch it by compilation breaking instead of
weird runtime errors
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This function was just using default: case statements for
the encoding of nlri's to a peer. Lay out all the different
cases and make things fail hard when a dev escape is found.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The function bgp_packet_mpattr_prefix_size had an if/else
body that allowed people to add encoding types to bgpd
such that we could build the wrong size packets. This
was exposed recently in commit:
0a9705a1e0
Where it was discovered flowspec was causing bgp update
messages to exceed the maximum size and the peer to
drop the connection. Let's be proscriptive about this
and hopefully make it so that things don't work when
someone adds a new safi to the system ( and they'll have
to update this function ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When compiling with -fsanitize=thread. I started getting this error:
staticd/static_zebra.c: In function ‘static_zebra_nht_get_prefix’:
staticd/static_zebra.c:316:1: error: control reaches end of non-void function [-Werror=return-type]
316 | }
| ^
Just to make future efforts still work, let's just make the compiler happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
ASAN reported the following memleak:
```
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x4d4342 in calloc (/usr/lib/frr/bgpd+0x4d4342)
#1 0xbc3d68 in qcalloc /home/sharpd/frr8/lib/memory.c:116:27
#2 0xb869f7 in list_new /home/sharpd/frr8/lib/linklist.c:64:9
#3 0x5a38bc in bgp_evpn_remote_ip_hash_alloc /home/sharpd/frr8/bgpd/bgp_evpn.c:6789:24
#4 0xb358d3 in hash_get /home/sharpd/frr8/lib/hash.c:162:13
#5 0x593d39 in bgp_evpn_remote_ip_hash_add /home/sharpd/frr8/bgpd/bgp_evpn.c:6881:7
#6 0x59dbbd in install_evpn_route_entry_in_vni_common /home/sharpd/frr8/bgpd/bgp_evpn.c:3049:2
#7 0x59cfe0 in install_evpn_route_entry_in_vni_ip /home/sharpd/frr8/bgpd/bgp_evpn.c:3126:8
#8 0x59c6f0 in install_evpn_route_entry /home/sharpd/frr8/bgpd/bgp_evpn.c:3318:8
#9 0x59bb52 in install_uninstall_route_in_vnis /home/sharpd/frr8/bgpd/bgp_evpn.c:3888:10
#10 0x59b6d2 in bgp_evpn_install_uninstall_table /home/sharpd/frr8/bgpd/bgp_evpn.c:4019:5
#11 0x578857 in install_uninstall_evpn_route /home/sharpd/frr8/bgpd/bgp_evpn.c:4051:9
#12 0x58ada6 in bgp_evpn_import_route /home/sharpd/frr8/bgpd/bgp_evpn.c:6049:9
#13 0x713794 in bgp_update /home/sharpd/frr8/bgpd/bgp_route.c:4842:3
#14 0x583fa0 in process_type2_route /home/sharpd/frr8/bgpd/bgp_evpn.c:4518:9
#15 0x5824ba in bgp_nlri_parse_evpn /home/sharpd/frr8/bgpd/bgp_evpn.c:5732:8
#16 0x6ae6a2 in bgp_nlri_parse /home/sharpd/frr8/bgpd/bgp_packet.c:363:10
#17 0x6be6fa in bgp_update_receive /home/sharpd/frr8/bgpd/bgp_packet.c:2020:15
#18 0x6b7433 in bgp_process_packet /home/sharpd/frr8/bgpd/bgp_packet.c:2929:11
#19 0xd00146 in thread_call /home/sharpd/frr8/lib/thread.c:2006:2
```
The list itself was not being cleaned up when the final list entry was
removed, so make sure we do that instead of leaking memory.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
The list delete function on creation was set to srv6_locator_chunk_free
Which takes a double pointer and dereferences it to free the data.
When list_delete is called it calls the delete function like this:
if (*list->del)
(*list->del)(node->data);
The data is not passed in by reference and as such we do not have
a double pointer. Fortunately this list_delete is only really
called on shutdown when the locator was deleted and we do not
have a fun situation where we were suddenly freeing 'something'.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When using auth keys in ospfv3, there are some memory
leaks when you change the key or remove the interface
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The early route queue has a series of `struct zebra_early_route *`
entries. Zebra is treating this memory as just a `struct route entry`.
This is wrong. Correct this to free the memory correctly.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The wq->spec.errorfunc is never used in the code.
It's been in the code base since 2005 and I also
do not remember ever seeing it being called. No
workqueue process function ever returns error.
Since it's not used let's just remove it from the
code base.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Building FRR with --enable-address-sanitizer and then running the
config_timing test makes the test run for over an hour on my machine.
The goal of this test is to ensure that the test runs 10000 routes
in/out in a reasonable amount of time. We cannot test this with
address-sanitizer enabled. So just make the test meaningless
from a timing perspective but keep it `alive` from a it might
catch some address sanitizer issue with 50 -vs- 10000 routes
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Address Sanitizer found this:
=================================================================
==418623==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 128 byte(s) in 4 object(s) allocated from:
#0 0x4bd732 in calloc (/usr/lib/frr/zebra+0x4bd732)
#1 0x7feaeab8f798 in qcalloc /home/sharpd/frr8/lib/memory.c:116:27
#2 0x7feaeaba40f4 in nexthop_group_new /home/sharpd/frr8/lib/nexthop_group.c:270:9
#3 0x56859b in netlink_route_change_read_unicast /home/sharpd/frr8/zebra/rt_netlink.c:950:9
#4 0x5651c2 in netlink_route_change /home/sharpd/frr8/zebra/rt_netlink.c:1204:2
#5 0x54af15 in netlink_information_fetch /home/sharpd/frr8/zebra/kernel_netlink.c:407:10
#6 0x53e7a3 in netlink_parse_info /home/sharpd/frr8/zebra/kernel_netlink.c:1184:12
#7 0x548d46 in kernel_read /home/sharpd/frr8/zebra/kernel_netlink.c:501:2
#8 0x7feaeacc87f6 in thread_call /home/sharpd/frr8/lib/thread.c:2006:2
#9 0x7feaeab36503 in frr_run /home/sharpd/frr8/lib/libfrr.c:1198:3
#10 0x550d38 in main /home/sharpd/frr8/zebra/main.c:476:2
#11 0x7feaea492d09 in __libc_start_main csu/../csu/libc-start.c:308:16
Indirect leak of 576 byte(s) in 4 object(s) allocated from:
#0 0x4bd732 in calloc (/usr/lib/frr/zebra+0x4bd732)
#1 0x7feaeab8f798 in qcalloc /home/sharpd/frr8/lib/memory.c:116:27
#2 0x7feaeab9b3f8 in nexthop_new /home/sharpd/frr8/lib/nexthop.c:373:7
#3 0x56875e in netlink_route_change_read_unicast /home/sharpd/frr8/zebra/rt_netlink.c:960:15
#4 0x5651c2 in netlink_route_change /home/sharpd/frr8/zebra/rt_netlink.c:1204:2
#5 0x54af15 in netlink_information_fetch /home/sharpd/frr8/zebra/kernel_netlink.c:407:10
#6 0x53e7a3 in netlink_parse_info /home/sharpd/frr8/zebra/kernel_netlink.c:1184:12
#7 0x548d46 in kernel_read /home/sharpd/frr8/zebra/kernel_netlink.c:501:2
#8 0x7feaeacc87f6 in thread_call /home/sharpd/frr8/lib/thread.c:2006:2
#9 0x7feaeab36503 in frr_run /home/sharpd/frr8/lib/libfrr.c:1198:3
#10 0x550d38 in main /home/sharpd/frr8/zebra/main.c:476:2
#11 0x7feaea492d09 in __libc_start_main csu/../csu/libc-start.c:308:16
SUMMARY: AddressSanitizer: 704 byte(s) leaked in 8 allocation(s).
Fix this!
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When shutting down ensure that any daemon operating with
snmp tells it to stop operating so no more data is sent.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The L3VPN best path computation now takes into accound the IGP metric.
Adapt the bgp_l3vpn_to_bgp_vrf tests so that routes with the best IGP
metric are selected when needed.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Display the IGP metric of the ultimate path in the SNMP OID
mplsL3VpnVrfRteInetCidrMetric1.
Fixes: da0c0ef70c ("bgpd: VRF-Lite fix best path selection")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Display IGP metric of the ultimate path in the command
"show bgp vrf X ipv(4|6)".
Fixes: da0c0ef70c ("bgpd: VRF-Lite fix best path selection")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Since the commit da0c0ef70c ("bgpd: VRF-Lite fix best path selection"),
the best path selection is made from the comparison of the attributes
of the original route i.e. the ultimate path.
The IGP metric is currently set on the child path instead of the
ultimate path (i.e. the parent path). On eBGP, the ultimate path is the
child path. However, for imported routes, the ultimate path is always
set to 0, which results in skipping the IGP metric comparison when
selecting the best path.
Set the IGP metric on the ultimate path when a BGP nexthop is added or
updated.
Fixes: da0c0ef70c ("bgpd: VRF-Lite fix best path selection")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Currently, bgp_packet_mpattr_prefix_size (bgpd/bgp_attr.c:3978) always returns zero for Flowspec prefixes.
This is because, for flowspec prefixes, the prefixlen attribute of the prefix struct is always set to 0, and the actual length is bytes is set inside the flowspec_prefix struct instead (see lib/prefix.h:293 and lib/prefix.h:178).
Because of this, with a large number of flowspec NLRIs, bgpd ends up building update messages that exceed the maximum size and cause the peer to drop the connection (bgpd/bgp_updgrp_packet.c:L719).
The proposed change allows the bgp_packet_mpattr_prefix_size to return correct result for flowspec prefixes.
Signed-off-by: Stephane Poignant <stephane.poignant@proton.ch>
The bgp_fsm_change_status function takes an int
for the new bgp state, which is an `enum bgp_fsm_status status`
let's convert over to being explicit.bgpd: use the enum instead of an int
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
