If you are including a network statement of a /32
then the current bgp martian checks will match the /32
together.
Problem:
!
router bgp 3235
neighbor 192.168.161.2 remote-as external
neighbor 192.168.161.131 remote-as external
!
address-family ipv4 unicast
network 10.10.3.11/32
network 192.168.161.0/24
no neighbor 192.168.161.2 activate
neighbor 192.168.161.2 route-map BLUE in
exit-address-family
!
eva# show bgp ipv4 uni
BGP table version is 1, local router ID is 10.10.3.11, vrf id 0
Default local pref 100, local AS 3235
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
10.10.3.11/32 0.0.0.0(eva) 0 32768 i
*> 192.168.161.0/24 0.0.0.0(eva) 0 32768 i
Displayed 2 routes and 2 total paths
eva# show bgp import-check-table
Current BGP import check cache:
192.168.161.0 valid [IGP metric 0], #paths 1
if enp39s0
Last update: Fri Sep 25 08:00:42 2020
10.10.3.11 valid [IGP metric 0], #paths 1
if lo
Last update: Fri Sep 25 08:00:42 2020
eva# show bgp ipv4 uni summ
BGP router identifier 10.10.3.11, local AS number 3235 vrf-id 0
BGP table version 1
RIB entries 3, using 576 bytes of memory
Peers 1, using 21 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt
janelle(192.168.161.131) 4 60000 69 70 0 0 0 00:03:21 0 1
Total number of neighbors 1
When we are deciding that a nexthop is valid there is not much point in checking
that a static route has a martian nexthop or not, since we self derived it already.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
bgp->default_keepalive was not considered when setting
peer->v_keepalive, causing the effective keepalive interval to
always be (holdtime/3), even when default_keepalive < (holdtime/3).
This ensures that the default_keepalive is used when it's set and
is < (holdtime/3).
Signed-off-by: Trey Aspelund <taspelund@cumulusnetworks.com>
(cherry picked from commit d8bf8c6128f2e493d473148213bd663a500c7f73)
An adjacency should be removed when the holdtimer expires, but if the
system is overloaded we may end up doing it late. In the meanwhile vtysh
will display an incorrect value in the show isis neighbor output, due to
an overflow of the unsigned variable used to display the Holdtime, e.g.:
pe1# show isis neighbor
Area test:
System Id Interface L state Holdtime SNPA
Spirent-1 2.201 1 Down 26 2020.2020.2020
Spirent-1 2.203 1 Up 21 2020.2020.2020
Spirent-1 2.204 1 Up 18446744073709551615 2020.2020.2020
Spirent-1 2.207 1 Up 18446744073709551615 2020.2020.2020
Spirent-1 2.208 1 Up 18446744073709551615 2020.2020.2020
Spirent-1 2.209 1 Up 0 2020.2020.2020
Spirent-1 2.210 1 Up 18446744073709551615 2020.2020.2020
pe2 12.200 1 Up 30 2020.2020.2020
Guard against that by printing an "Expiring" message instead.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
There is no need to call isis_adj_state_change_hook once per level
in isis_adj_state_change, we can just do it once at the end.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Problem found that if a router-id was not defined or derived
initially, the bgp->router_id would be set to 0x0 and used
for determining auto-rd values. When bgp received a subsequent
router-id update from zebra, bgp would not completely process
the update since it was treated as updating an already derived
router-id with a new value, which is not desired. This also
could leave the auto rd/rt inforamation missing or invalid in
some cases. This fix allows updating the derived router-id if
the previous value was 0/0.
Ticket: CM-31441
Signed-off-by: Don Slice <dslice@nvidia.com>
The pbra variable is already derefed in all paths to this spot
and as such we cannot be NULL at this point.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Clean up the rare situation when bind fails to not
close the fd that was just opened and have the socket
leaked.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When doing multiplication of (int) * (uint_8t) we can
have overflow and end up in a weird state. Intentionally
upgrade the type then do the math.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When calling yang_snodes_iterate_subtree we don't care about
the return code. So explicitly say we don't care so that
SA tools can be on the same page as us.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When attempting to limit the amount of data sent from the kernel
to FRR, some kernels we can run against may not have this ability
in which case the setsockopt will fail. Notice that in the log.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This problem was reported by the sanitizer -
=================================================================
==24764==ERROR: AddressSanitizer: heap-use-after-free on address 0x60d0000115c8 at pc 0x55cb9cfad312 bp 0x7fffa0552140 sp 0x7fffa0552138
READ of size 8 at 0x60d0000115c8 thread T0
#0 0x55cb9cfad311 in zebra_evpn_remote_es_flush zebra/zebra_evpn_mh.c:2041
#1 0x55cb9cfad311 in zebra_evpn_es_cleanup zebra/zebra_evpn_mh.c:2234
#2 0x55cb9cf6ae78 in zebra_vrf_disable zebra/zebra_vrf.c:205
#3 0x7fc8d478f114 in vrf_delete lib/vrf.c:229
#4 0x7fc8d478f99a in vrf_terminate lib/vrf.c:541
#5 0x55cb9ceba0af in sigint zebra/main.c:176
#6 0x55cb9ceba0af in sigint zebra/main.c:130
#7 0x7fc8d4765d20 in quagga_sigevent_process lib/sigevent.c:103
#8 0x7fc8d4787e8c in thread_fetch lib/thread.c:1396
#9 0x7fc8d4708782 in frr_run lib/libfrr.c:1092
#10 0x55cb9ce931d8 in main zebra/main.c:488
#11 0x7fc8d43ee09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
#12 0x55cb9ce94c09 in _start (/usr/lib/frr/zebra+0x8ac09)
=================================================================
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The read/write mlag buffer sizes of 2k were sufficient
for ~100 S,G notifications at one go. Increase to 32k
to give us 16 times the space.
Ticket: CM-31576
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
If we receive a message that is greater than our buffer
size we are in a situation where both the read and write
buffers are fubar'ed beyond the end. Assert when we notice
this fact.
Ticket: CM-31576
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The normal pattern of writing the type/length at the beginning
of the packet was not being quite followed. Modify the mlag
code to respect the proper way of doing things and get rid
of a stream_new and copy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The neigh hold timer was firing after the neigh was deleted resulting
in the following crash -
[
at ./zebra/zebra_evpn_neigh.h:155
at zebra/zebra_evpn_neigh.c:447
at lib/thread.c:1578
at zebra/main.c:488
]
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Found that the command "evpn mh neigh-holdtime" can be set but
not deleted. This fix solves the delete process
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
When an ES peer withdraws a MAC-IP route we hold the entry for N seconds
to allow an external daemon (neighmgr) to establish host reachability
independent of the peer. Add config commands to allow the user to set
this holdtime (N).
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Ensure the list of daemons to start is either the one specified
by a caller or the default one from the router configuration.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Let's not make the entire `depend_finds` function pay
for the data gathering needed for the debug. There
are numerous other places in the code that check
the NEXTHOP_FLAG_RECURSIVE and do the same output.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The linux kernel is getting RTM_F_TRAP and RTM_F_OFFLOAD for
kernel routes that have an underlying asic offload. Write the
code to receive these notifications from the linux kernel and
to store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some linux kernels are starting to support the idea of knowledge
about the underlying asic. Add a boolean that we can set/unset
to track whether or not we think the router has this functionality
available.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
