Add the zapi code for encoding/decoding of backup nexthops for when
we are ready for it, but disable it for now so that we revert
to the old way with them.
When zebra gets a proto-NHG with a backup in it, we early fail and
tell the upper level proto. In this case sharpd. Sharpd then reverts
to the old way of installation with the route.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Align the zapi NHG apis to be more consistent with the zapi_route
apis. Add a struct zapi_nhg to use for encodings as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add some header documentation to make it clear that you
cannot delete more than one item during each iteration.
Doing so could cause memory corruption for next pointer
if its also deleted from the table.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add the proto Nexthop Group Notify Owner header to
the log command types for string conversion.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Make the message parameters align better with other zapi
notifications and change the ID to correctly be a uint32.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add logging info for the new zapi ZEBRA_NHG_ADD[DEL]
message types. With this patch, they are logged properly
when debugs are turned on.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a command `set installable` that allows configured nexthop
groups to be treated as separate/installable objects in the RIB.
A callback needs to be implemented per daemon to handle installing
the NHG into the rib via zapi when this command is set. This
patch includes the implementation for sharpd.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add setting the onlink flag to the zapi_nh conversion
helper function so that we can set the onlink flag with
it when passing down NHGs from upper level protos.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Determine the NHG ID spacing and lower bound with ZEBRA_ROUTE_MAX
in macros.
Directly set the upperbound to be the lower 28bits of the uint32_t ID
space (the top 4 are reserved for l2-NHGs). Round that number down
a bit to make it more even.
Convert all former lower_bound calls to just use the macro.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a command/functionality to only install proto-based nexthops.
That is nexthops owned/created by upper level protocols, not ones
implicitly created by zebra.
There are some scenarios where you would not want zebra to be
arbitrarily installing nexthop groups and but you still want
to use ones you have control over via lib/nexthop_group config
and an upper level protocol.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Implement the underlying zebra functionality to Add/Del an
internal zebra and kernel NHG.
These NHGs are managed by the upperlevel protocols that send them
down via zapi messaging.
They are not put into the overall zebra NHG hash table and only
put into to the ID table. Therefore, different protos cannot
and will not share NHGs.
The proto is also set appropriately when sent to the kernel.
Expand the separation of Zebra hashed/shared/created NHGs and
proto created and mangaged NHGs.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Modify the send down of a route to use the nexthop group id
if we have one associated with the route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to send a NHG from an upper level protocol down to
zebra. ZAPI_NHG_ADD encompasses both the addition and replace
semantics ( If the id passed down does not exist yet, it's Add,
else it's a replace ).
Effectively zebra will take this nhg passed down save the nhg
in the id hash for nhg's and then create the appropriate nhg's
and finally install them into the linux kernel. Notification
will be the ZAPI_NHG_NOTIFY_OWNER zapi message for normal
success/failure messaging to the installing protocol.
This work is being done to allow us to work with EVPN MH
which needs the ability to modify NHG's that BGP will own
and operate on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add new function zclient_get_nhg_start that will allow an
upper level protocol to get a starting point for it's own
nhg space. Give each protocol a space of 50 million.
zebra will own the space from 0 - 199999999 because
of SYSTEM, KERNEL and CONNECT route types.
This is the start of some work that will allow upper
level protocols to install and maintain their own NHG's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When calling yang_snodes_iterate_subtree we don't care about
the return code. So explicitly say we don't care so that
SA tools can be on the same page as us.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The linux kernel is getting RTM_F_TRAP and RTM_F_OFFLOAD for
kernel routes that have an underlying asic offload. Write the
code to receive these notifications from the linux kernel and
to store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The Solaris code has gone through a deprecation cycle. No-one
has said anything to us and worse of all we don't have any test
systems running Solaris to know if we are making changes that
are breaking on Solaris. Remove it from the system so
we can clean up a bit.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
* use actual error code instead of "false"
* add missing new line
Before:
```
nfware# show interface | include (a]
% Regex compilation error: Success% Bad regexp '(a]'
% Unknown command: show interface | include (a]
```
After:
```
nfware# show interface | include (a]
% Regex compilation error: Unmatched ( or \(
% Bad regexp '(a]'
% Unknown command: show interface | include (a]
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Code was added in the past to support a value of VRF_DEFAULT different
from 0. This option was abandoned, the default vrf id is always 0.
Remove this code, this will simplify the code and improve performance
(use a constant value instead of a function that performs tests).
Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com>
vrf_id_to_name() looks up in a RB_TREE to find the VRF entry, then
reads the name.
Avoid it for VRF_DEFAULT, which always exists and for which the
translation is straightforward.
Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com>
The vrf_get function is called throughout the code base
so much so that when you turn on vrf debugging it eclipses
everything else to a degree that is completely unreasonable.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The vrf name was not being printed out in some vrf debugs. Add
this data in so people don't have to remember the vrf id.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When the nexthop-groups were added to FRR for some
reason the call to nexthop_group_disable_vrf was
not added although it was written.
Add it in.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In the new Sysrepo, all SR_EV_ENABLED notifications are followed by
SR_EV_DONE notifications (assuming no errors occur), so there's no
need to special case the SR_EV_ENABLED event anymore (e.g. do full
transactions in one step).
While here, add a few more guarded debug messages to facilitate
troubleshooting.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Make the sysrepo plugin ignore the deletion of configuration
nodes that don't exist anymore instead of logging an error and
rejecting the changes. This is necessary because Sysrepo delivers
delete notifications for all nodes of a deleted data tree instead
of delivering a single delete notification of the top-level subtree
node (which would suffice for the northbound layer).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
From Sysrepo's documentation:
"Note: do not use fork() after creating a connection. Sysrepo
internally stores PID of every created connection and this way a
mismatch of PID and connection is created".
Introduce a new "frr_very_late_init" hook in libfrr that is only
called after the daemon is forked (when the '-d' option is used)
and after the configuration is read. This way we can initialize
the sysrepo plugin correctly even when the daemon is daemonized,
and after the Sysrepo CLI commands are processed (only "debug
northbound client sysrepo" for now).
Fixes#7062
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When installing rules pass by the interface name across
zapi.
This is being changed because we have a situation where
if you quickly create/destroy ephermeal interfaces under
linux the upper level protocol may be trying to add
a rule for a interface that does not quite exist
at the moment. Since ip rules actually want the
interface name ( to handle just this sort of situation )
convert over to passing the interface name and storing
it and using it in zebra.
Ticket: CM-31042
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Change the way the YANG schema node iteration functions work so that
the northbound layer won't have issues with more complex YANG modules
that contain multiple levels of YANG augmentations or modules that
augment themselves indirectly (by augmenting groupings).
Summary of the changes:
* Change the yang_snodes_iterate_subtree() function to always follow
augmentations and add an optional "module" parameter to narrow down
the iteration to nodes of a single module (which is necessary in
some cases). Also, remove the YANG_ITER_ALLOW_AUGMENTATIONS flag
as it's no longer necessary.
* Change yang_snodes_iterate_all() to do a DFS iteration on the resolved
YANG data hierarchy instead of iterating over each module and their
augmentations sequentially.
Reported-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Whenever libyang loads a module that contains a leafref, it will
also implicitly load the module of the referring node if it's
not loaded already. That makes sense as otherwise it wouldn't be
possible to validate the leafref value correctly.
The problem is that loading a module implicitly violates the
assumption of the northbound layer that all loaded modules
are implemented (i.e. they have a northbound node associated
to each schema node). This means that loading a module that
isn't implemented can lead to crashes as the "priv" pointer
of schema nodes is no longer guaranteed to be valid. To fix this
problem, add a few null checks to ignore data nodes associated
to non-implemented modules.
The side effect of this change is harmless. If a daemon receives
configuration it doesn't support (e.g. BFD peers on staticd),
that configuration will be stored but otherwise ignored. This can
only happen when using a northbound client like gRPC, as the CLI
will never send to a daemon a command it doesn't support. This
minor problem should go away in the long run as FRR migrates to
a centralized management model, at which point the YANG-modeled
configuration of all daemons will be maintained in a single place.
Finally, update some daemons to stop implementing YANG modules
they don't need to (i.e. revert 1b741a01c and a74b47f5).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
the walk routine is used by vxlan service to identify some contexts in
each specific network namespace, when vrf netns backend is used. that
walk mechanism is extended with some additional paramters to the walk
routine.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Changed negating set metric route-map command to be usable in
conjunction with the affirming command.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
The "set metric" command wasn't processing metric additions and
subtractions (using + and -) correctly. Fix those problems.
Also, remove the "+metric" and "-metric" options since they don't
work and don't make any sense (they could be interpreted as unitary
increments/decrements but that was never supported).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
