show error all was displaying 0 value for code, whereas real code value
was not displayed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The hash_get function when called and the alloc_func returns
a NULL value, we do not create a backet nor do we insert
anything into the hash. As such backet->data must always
be non-NULL.
Modify the description in hash_get to inform of this.
Additionally indicate that hash_walk and hash_iterate
cannot have a NULL backet->data value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The CMSG_FIRSTHDR was broken on solaris pre version 9. Version 9
was released in May of 2002 and EOL'ed in 2014. Version 8 EOL'ed
in 2012. Remove special case code for a little used platform
that has not seen the light of day in a very long time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Used as:
frr_elevate_privs(&my_privs) {
... code ...
}
and handles privilege raise/lower automatically in conjunction with the
C expression block. This makes it impossible to accidentally exit a
function with privileges raised (and then running a whole bunch of other
code with privs.)
Signed-off-by: David Lamparter <equinox@diac24.net>
* Use the correct license header
* Stop headers from including themselves
* Use uniform relative include conventions
* Ensure that sources include what they use
* Turn off clang-format around struct array blocks
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The clippy code does not need to log the error messages
as errors as that it is only run as part of the build
itself and as long as we see the notifications we are good.
So convert zlog_err to zlog_notice so that we do not think
we have any zlog_err's in lib anymore
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Sometimes a error state is detected when we have added
new code to FRR, but not updated all the places that
we should have. Consider this a developmental escape
that needs to be fixed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a new error code LIB_ERR_SYSTEM_CALL to the ferr subsystem.
Additionally convert LIB_ERR_VRF_SOCKET to a more generic
LIB_ERR_SOCKET.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are logging a commands via the `log commands`
cli, use zlog_notice instead of zlog_err, since that
this is not an actual error situation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
Add code to auto-create the ferr infrastructure as well as add
some initial error handling for vrf.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Simplify addition of new messages to the system by allow passage of
arrays of data, instead of one at a time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Add zlog_* function to log with a reference code
* Add ability to track reference cards for errors to ferr.[ch]
* Assign some reference code ranges
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The definition of the interface commands in vtysh.c were outdated.
Currently, all daemons that call if_cmd_init() will have the "no interface
IFNAME" command and the "[no] description" commands as well, so there's
no need to define exceptions for these commands anymore.
To fix this, make extract.pl parse the if.c file so that vtysh can get the
interface commands from there automatically. Only the "interface IFNAME
[vrf NAME]" must be kept in vtysh.c because it changes the vty node and
thus needs special treatment.
Finally, make pimd and pbrd display interface descriptions on "sh run"
when they are configured.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Only zebra and pimd call vrf_cmd_init(), so these are the only daemons
that should receive VRF commands from vtysh;
* "netns NAME" and "no netns NAME" are available only in zebra, write
custom DEFSHs in vtysh to make it aware of that;
* Remove the "no vrf NAME" definition from vtysh.c and expose the
original command to vtysh by converting the DEFUN_NOSH to a simple
DEFUN. This command doesn't change the vty node so there's no need to
special case it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When `bfdd` is enabled - which it is by default - re-route the PTM-BFD
messages to the FRR's internal BFD daemon instead of the external
PTM daemon.
This will help the migration of BFD implementations and avoid
duplicating code.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Implement vty shell integration and allow `bfdd` to be configured
through FRR's vtysh.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If malloc_usable_size() or malloc_size() are available, we can count
total usage of a particular MTYPE. (Without the functions, we don't
know how much to subtract on free.)
Signed-off-by: David Lamparter <equinox@diac24.net>
When calling route_map_finish, every place that we do we must
first set the deletion event to NULL, or we will create an infinite
loop, if we are using the delayed route-map application code.
As such we might as well just make the route_map_finish code
do this work, as that there is really no viable alternative here
and route_map_finish should only be called on shutdown.
This fixes an infinite loop in zebra on shutdown when there
are route-maps.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Take the source-prefix sub-TLV into consideration when running SPF
and support creation/deletion of dst-src routes as result.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Modify stream_new in this way:
1) ALLOC allocations do not fail, they cause a crash so remove
if tests for it.
2) Modify usage of XCALLOC to XMALLOC and then hand set all the
relevant data in the stream pointer.
With this modification stream allocation of 10000000 streams at
10k bytes each reduced from on average 1.43 seconds to 0.65 seconds.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we issue this command, we are getting:
robot# show ip route vrf green json
{}
% VRF green not found
robot# show ip route vrf green
% VRF green not found
% VRF green not found
robot#
Fix the command so it only displays one line of output
for json or non-json output.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fix ripd crash of null pointer.
when authenticate a rip packet,
the key pointer or the key string pointer may be null,
the code have to return then.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
The `type` parameter was not being compared with `cmsg_type`, so the
result of this function was always a pointer to the first header
matching the level.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When we read in a backup file, we should save the original
host.config so that we can put it back to the correct original
location after we read in the backup config.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow protocols to specify to zebra that they would like zebra
to use the distance passed down as part of determine sameness for
Route Replace semantics.
This will be used by the static daemon to allow it to have
backup static routes with greater distances.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When I did a show ip route with `json` on a vrf when it didn't exist,
frr would output invalid json.
Signed-off-by: Nathan Van Gheem <nathan@cumulusnetworks.com>
Modify the unlock code for a route_node to return NULL on
pointer freed or to return the node itself again.
We'll need to go through the code and fix this pattern,
but this is a problem for another day. Get this fix in
place and we can make it a low hanging problem to fix.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add some parameter names to functions in table.h to give a
clue as to what we expect people to pass in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On old compilers CPP_NOTICE should be a macro evaluating to an empty
statement, instead of being undefined.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
EVPN ND ext community support NA flag R-bit, to have proxy ND.
Set R-bit in EVPN NA if a given router is default gateway or there is a
local
router attached, which can be determine based on local neighbor entry.
Implement BGP ext community attribute to generate and parse R-bit and
pass along zebra to program neigh entry in kernel.
Upon receiving MAC/IP update with community type 0x06 and sub_type 0x08,
pass the R-bit to zebra to program neigh entry.
Set NTF_ROUTER in neigh entry and inform kernel to do proxy NA for EVPN.
Ref:
https://tools.ietf.org/html/draft-ietf-bess-evpn-na-flags-01
Ticket:CM-21712, CM-21711
Reviewed By:
Testing Done:
Configure Local vni enabled L3 Gateway, which would act as router,
checked
show evpn arp-cache vni x ip <ip of svi> on originated and remote VTEPs.
"Router" flag is set.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add 'const' to prefix args to several zebra route update,
redistribution, and route owner notification apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This function should be called with a known vrf_id. All other cases, the
other API should be called.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Sometimes, the file under /var/run/netns may not be authorised to be
read ( because it is not read permission for frr user, for instance).
so it is good to know what happened.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Some values for icmp type/code can not be encoded like port source or
port destination. This is the case of 0 value that is authorized for
icmp.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The flowspec fragment attribute is taken into account to be pushed in
BGP policy routing entries. Valid values are enumerate list of 1, 2, 4,
or 8 values. no combined value is supported yet.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The packet length can be injected from fs entry with an enumerate list;
the negation of the value is also taken into account.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Those flags can be shared between BGP and Zebra. That is why
those flags are moved to common pbr.h header file.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When in a dev build add a bit of code to track max
depth of a fifo and to allow zebra to report on it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Previous correction (2c2d5cb397) was not enough,
so now it is ensured that the argument shift is not negative nor zero.
Signed-off-by: F. Aragon <paco@voltanet.io>
If your daemon does not need any special privileges
and you are compiling with HAVE_CAPABILIES, the
zprivs->change pointer will end up NULL due
to the way zprivs_caps_init. So as a check
let's add a NULL check for zprivs->change
and set it to a function that will do nothing.
This change prevents a crash if you raise privileges
when your daemon needs no special privileges.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The route_map_walk_update_list callback function
never uses the return code, so just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
route_map_clear_updated is only used by routemap.c,
don't expose it too be used by the outside world.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
route_map_mark_updated has a `int del_later` variable
that is passed in but never used. Just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to specify the designated log level at startup.
--log-level <emergencies|alerts|critical|errors|warnings|notifications|informational|debugging>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove the special case code to use syslog for Cumulus.
They can specify this via startup now instead of having
a special compile flag for this option.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are starting a daemon, allow the user to specify:
--log <stdout|syslog|file:file_name>
This can be used on early startup to put the log files
where the end user wants them to show up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The read in of cli was happening prior to thread
event handling for non-integrated configs. This
is interesting for 2 reasons:
1) Read-in of integrated configs was after thread
event loop startup, so we had a difference of behavior
2) Read-in can cause a series of events that cause
us to attempt to communicate with zebra. The zebra
zapi connection only happens after the thread event
loop has been started. This can cause data that
is being written down to zebra to be lost and
no real way to notice that this has happened and
to recover gracefully.
Modify the code to create a thread event for read
in of client config.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we fail to read in the config file and we have
specified a backup of the backup, attempt to
read that information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When reading the config file add an ability to know
if we have properly read in anything. So that a daemon
can make fallback plans.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are iterating through the hash, keep count of how many
we've called and if we have finished calling the hash->size
iterator times, then short-circuit and stop looping over
the entire array.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Unfortunately user CFLAGS causes #define conflicts with #defines in
Python development headers, which causes build failures under certain
platforms when using -Werror.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The current implementation of peer flags (e.g. shutdown, passive, ...)
only has partial support for overriding flags of a peer-group when the
peer is a member. Often settings might get lost if the user toys around
with the peer-group configuration, which can lead to disaster.
This commit introduces the same override implementation which was
previously integrated to support proper peer flag/attribute override on
the address-family level. The code is very similar and the global
attributes now use their separate state-arrays *flags_invert* and
*flags_override*.
The test suite for BGP peer attributes was extended to also check peer
global attributes, so that the newly introduced changes are covered. An
additional feature was added which allows to test an attribute with an
*interface-peer*, which can be configured by running `neighbor IF-TEST
interface`. This was introduced so that the dynamic runtime inversion of
the `extended-nexthop` flag, which is only enabled by default for
interface peers, can also be tested.
Last but not least, two small changes have been made to the current bgpd
implementation:
- The command `strict-capability-match` can now also be set on a
peer-group, it seems like this command slipped through while
implementing peer-groups in the very past.
- The macro `COND_FLAG` was introduced inside lib/zebra.h, which now
allows to either set or unset a flag based on a condition. The syntax
for using this macro is: `COND_FLAG(flag_variable, flag, condition)`
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
* Move configure flag propagations out of user flags
* Use AC_SUBST to transfer flag values to Automake
* Set default AM_CFLAGS and AM_CPPFLAGS in common.am and change child
Makefiles to modify these base variables
* Add flag override to turn off all sanitizers when building clippy
* Remove LSAN suppressions blacklist as it's no longer needed
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
With a new version of clang 6.0, the compiler is detecting more
issues where we may be possibly be truncating the output string.
Fix by increasing the size of the output string to make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Sometimes output would be mangled when filtering with include as a
result of the following bugs:
* Filters were applied per each call to vty_out() instead of buffering
until a line break and then applying
* Long output would sometimes be cut due to using the wrong buffer
pointer
Also remove the trailing \n as it should no longer be necessary to
ensure the vty prompt ends up on a new line.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add function to move all data to the start of a vector by shifting
over contiguous empty slots
* Use this function to remove empty slots leftover after
frrstr_filter_vec
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Fix potential NULL dereference
* Fix use of uninitialized value
* Fix leaking memory by not freeing regex_t
* Fix extra \n when using empty regex filter
* Clean up still-reachable hook memory
* Handle nonexistent pager
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
An optimized version of this has already been implemented within graph.c
that assumes some specialized constraints for that code. It's generally
useful so this change implements a general purpose version of it.
This fixes cmd_make_strvec() that was broken by some code shuffling in
previous commits.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rewrite pager implementation
* Replace fprintf() with vty_out()
* Modify vty_out() for better vtysh support
* Remove static global outputfile var
* Remove fp argument from many vtysh functions
* Add some docs for stuff along the way
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This patch adds a CLI preprocessor function that activates when `|` is
found in the command. This is the start of adding support for some text
processing utilities intended for inline use. The first one implemented
here is `| include`, which provides grep-like filtering of command
output.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This patch adds a hook point intended to allow subscribers to modify the
raw text of a CLI command before it is passed to the rest of the CLI
pipeline. To give access to the raw text of the command, a new function
for executing CLI has been defined whose only difference from
`cmd_execute_command` is that it accepts the command to execute as a
string rather than as a string vector.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
I see lots of the same code being copy-pasted and slightly tweaked for
string processing all over the codebase. Time to start aggregating these
pieces into something consistent and correct.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Programs that link to libnetsnmp must be compiled using a special set
of flags as specified by the "net-snmp-config --base-cflags" command
(whose output is stored in the SNMP_CFLAGS variable). The problem is
that "net-snmp-config --base-cflags" can output -std=c99 in addition to
other compiler flags in some platforms, and this breaks the build since
FRR souce code makes use of some GNU compiler extensions (e.g. allow
trailing commas in function parameter lists). In order to solve this
problem, append -std=gnu99 after SNMP_CFLAGS in all makefiles where this
variable is used. This way the -std=c99 flag will be overwritten when it's
present. Source files that don't link to libnetsnmp will be compiled using
either -std=gnu99 or -std=gnu11 depending on the compiler availability.
Fixes#1617.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Remove references to ospf source files from linklist.[ch]
* Remove documentation comments from hash.c and linklist.c
* Add comprehensive documentation comments to linklist.h and hash.h
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* list_dup(): duplicates a linked list
* list_sort(): in-place sort of linked list w/ ascending quicksort
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
After PBR or BGP sends back a request for sending a rule/ipset/ipset
entry/iptable delete, there may be issue in deleting it. A notification
is sent back with a new value indicating that the removal failed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Those 3 fields are read and written between zebra and bgpd.
This permits extending the ipset_entry structure.
Combinatories will be possible:
- filtering with one of the src/dst port.
- filtering with one of the range src/ range dst port
usage of src or dst is exclusive in a FS entry.
- filtering a port or a port range based on either src or dst port.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The warning string which appears when the users executes 'no (enable)
password' was moved into command.h and declared as a constant named
'NO_PASSWD_CMD_WARNING'.
This avoids duplicate code and makes it easy to change the warning
message in all places at once.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
When the user executes one of the commands 'no password' or 'no enable
password', a warning message gets shown to inform the user of the
security implications.
While the current implementation works, a warning message gets printed
once for each daemon, which can lead to seeing the same message many
times. This does not affect functionality, but looks like an error to
the user as it can be seen within issue #1432.
This commit only prints the warning message inside lib when vtysh
dispatch is not being used. Additionally, the warning message was copied
into the vtysh command handlers, so that they get printed exactly once.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The pull request #1545 from @donaldsharp introduced the command 'no
password' to remove an existing terminal connection password.
Additionally, warnings have been added to both 'no password' and 'no
enable password' to make the user aware of any security implications.
It seems that this specific pull request was never merged against master
and got lost. This commit is a cherry-pick of d4961273cb with fixed
conflicts and updated documentation.
Thanks to @donaldsharp and @pogojotz for the original PR.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
For ipv6 host, the next hop is conevrted to ipv6 mapped address.
However, the remote rmac should still be programmed with the ipv4 address.
This is how the entries will look in the kernel for ipv6 hosts routing.
vrf routing table:
ipv6 -> ipv6_mapped remote vtep on l3vni SVI
neigh table:
ipv6_mapped remote vtep -> remote RMAC
bridge fdb:
remote rmac -> ipv4 vtep tunnel
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
VRF static route commands adopt global static config if static config is
placed after a vrf context with no separator, workaround by always
writing static route config before vrf config
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
stream_fifo is used as our standard internal message queue. Message
queues are useful in multithreaded environments. Up until now I have
been doing my own synchronization when using stream_fifo in this way;
this patch gets rid of the need for that boilerplate and decreases the
risk of locking mistakes when working with this datastructure.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
EVPN prefix depends on the EVPN route type.
Currently, in FRR we have a prefix_evpn/evpn_addr which relates to a evpn prefix.
We need to convert this to encompass an union of various EVPN route-types.
This diff handles the necessary code changes to adopt the new struct evpn_addr.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Customers have requested the ability to name their devices starting
with a number instead of a letter. This fix changes the check for
hostname to allow either a letter or a number.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add client proto and instance number in all msg (request and
responses) to/form a label manager. This is required for a
label manager acting as 'proxy' (i.e. relaying messages towards
another label manager) to correctly deliver responses to the
requesting clients.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
The API for filling in an IPTABLE_ADD and IPTABLE_DELETE message.
Also, the API is handling the notification callback, so as to know if
zebra managed to add or delete the relevant iptable entry.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
With the usage of a 32 bit number as a integer, but storing
non-signed values in it, we have cases where numbers greater
than 2 billion are being read in and stored and used before
lower value numbers, which of course is awful and mean.
Fixes: #2126
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
When popping a stream from a stream_fifo, the stream->next pointer is
not NULL'd out. If this same stream is subsequently pushed onto a
stream_fifo (either the same one or a different one), because
stream_fifo's use tail insertion the ->next pointer is not updated and
thus will point to whatever the next stream in the first stream_fifo
was. stream_fifo_free does not check the count of the stream_fifo when
freeing its constituent elements, and instead walks the linked list.
Consequently it will continue walking into the first stream_fifo from
which the last stream was popped, freeing each stream contained there.
This leads to use-after-free errors.
This patch makes sure to set the ->next pointer to NULL when doing tail
insertion in stream_fifo_push and when popping a stream from a
stream_fifo.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The addr value will never be null because of the way we do the
cli, but the SA system doesn't understand this. Add an assert
to make it happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The grammar sandbox has had the ability to dump individual commands as
DOT graphs, but now that generalized DOT support is present it's trivial
to extend this to entire submodes. This is quite useful for visualizing
the CLI space when debugging CLI errors.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add general-purpose DFS traversal code
* Add ability to dump any graph to DOT language
* Add tests for graph datastructure
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Thread statistics are collected and stored in a hashtable shared across
threads, but while the hashtable itself is protected by a mutex, the
records themselves were not being updated safely. Change all thread
history collection to use atomic operations.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
For the last six years this source file has been using a type defined in
a header it did not include.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add general-purpose DFS traversal code
* Add ability to dump any graph to DOT language
* Add tests for graph datastructure
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Zebra is starting to have some run-time capabilites that would be
useful to pass up to the higher level protocols so that they
can act in an appropriate manner when needed.
Send the ecmp value zebra is being run with and whether or not
we believe mpls is enabled in the kernel or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The mpls_label2str and mpls_str2label functions should not
be zebra exclusive functions. Move them to lib/mpls.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Properly notice when we get if up/down and vrf enable/disable
events and attempt to properly install nexthops as they
come in.
Ticket: CM20489
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Store Nexthop's as the incoming raw data. This will allow
us to separate the act of inputting the cli from the
act of instantiating the cli.
Ticket: CM-20489
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The delete was not properly deleting the nexthop from
the nexthop group and it was not properly setting the
nexthop's pointers to NULL.
Ticket: CM-20261
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prevent the creation of a v6 LL nexthop that does not include an interface
for proper resolution.
Ticket: CM-20276
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
