The ringbuf is 650k in size. This is obscenely large and
in practical experimentation FRR never even approaches
that size at all. Let's reduce this to 1.5 max packet sizes.
If a BGP_MAX_PACKET_SIZE packet is ever received having a bit
of extra space ensures that we can read at least 1 packet.
This also will significantly reduce memory usage when the
operator has a lot of peers.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit fe1c72a573)
Commit: a0b937de42
Introduced the idea of a input Q packet limit. Say you read in
635000 bytes of data and the input Q is already at it's limit
(currently 1000) then when bgp_process_reads runs it will
assert because there is less then a BGP_MAX_PACKET_SIZE in ibuf_work.
Don't assert as that it's irrelevant. Even if we can't read a full packet
in let's let the whole system keep working as that as the input Q length
comes down we will start pulling down the ibuf_work and it will be ok.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 102bad0a9b)
The peer->ibuf_scratch was allocating 65535 * 10 bytes
for scratch space to hold data incoming from a read
from a peer. When you have 4k peers this is 262,1400,000
or 262 mb of data. Which is crazy large. Especially
since the i/o pthread is reading per peer without
any chance of having the data interfere with other reads.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit bdc1762405)
This is never used. Free up another 65k of stream data
never used per peer.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit acf4defcd8)
This was only ever being allocated and de-allocated.
Let's save 65k per peer
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit b157af0ac1)
configure: error: in `/src':
configure: error: protobuf requested but protoc-c not found. Install protobuf-c.
See `config.log' for more details
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
While running MLD conformance test 9.2 core is getting generated.
Test setps:
1. ANVL: Listen (for upto <GeneralQueryRecvWaitTime> seconds) on <AIface-0>.
2. DUT: Send MLD General Query Message.
3. ANVL: Send MLD Report Message to <DIface-0> containing:
• IPv6 Source Address field set to link-local IPv6 Address of HOST-1
• IPv6 Destination Address field set to <McastAddrGroup>
• MLD Multicast Address field set to <McastAddrGroup>.
4. ANVL: Wait for <ProcessTime> seconds for DUT to process and add <Mcas- tAddrGroup> to its Multicast Address list.
5. ANVL: Send MLD General Query Message to <DIface-0> containing:
• IPv6 Source Address field set to link-local IPv6 Address of RTR-1 which is numerically less than the link-local IPv6 unicast address of <DIface-0>
• IPv6 Destination Address field set to link-scope all-nodes multicast address.
6. ANVL: Send MLD Multicast-Address-Specific Query Message to <DIface-0> containing:
• IPv6 Source Address field set to link-local IPv6 Address of RTR-1
• IPv6 Destination Address field set to <McastAddrGroup>
• MLD Multicast Address field set to <McastAddrGroup>
• MLD Maximum Response Delay field value set to 0.
7. ANVL: Verify that the Maximum Response Delay timer for <McastAd- drGroup> is set to zero.
While running above test, when group specific query is received we start gm_t_sg_expire timer.
Once this timer expires, we clear the corresponding entry.
During this sg->state was still set to JOIN. This happened because receiver went down without sending leave.
Added a condition to update the sg->state before starting the timer.
If receiver goes down without sending leave we will update sg->state to GM_SG_JOIN_EXPIRING or GM_SG_NOPRUNE_EXPIRING based on previous state.
If we receive a join then sg->state will be refreshed and will be updated to JOIN state.
Fixes: #13387
Signed-off-by: Abhishek N R <abnr@vmware.com>
(cherry picked from commit e9484001ee)
problem:
In CLI config codeflow there are memory leaks in failure scenario
Fix:
Code changes are done to free ecommunity
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
(cherry picked from commit 56b895c172)
When switching `router bgp`, `no router bgp` and doing redistributions, we should
ignore this action, otherwise memory leak happens:
```
Indirect leak of 400 byte(s) in 2 object(s) allocated from:
0 0x7f81b36b3a06 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:153
1 0x7f81b327bd2e in qcalloc lib/memory.c:105
2 0x55f301d28628 in bgp_node_create bgpd/bgp_table.c:92
3 0x7f81b3309d0b in route_node_new lib/table.c:52
4 0x7f81b3309d0b in route_node_set lib/table.c:61
5 0x7f81b330be0a in route_node_get lib/table.c:319
6 0x55f301ce89df in bgp_redistribute_add bgpd/bgp_route.c:8907
7 0x55f301dac182 in zebra_read_route bgpd/bgp_zebra.c:593
8 0x7f81b334dcd7 in zclient_read lib/zclient.c:4179
9 0x7f81b331d702 in event_call lib/event.c:1995
10 0x7f81b325d597 in frr_run lib/libfrr.c:1213
11 0x55f301b94b12 in main bgpd/bgp_main.c:505
12 0x7f81b2b57082 in __libc_start_main ../csu/libc-start.c:308
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit bddf5c13b2)
When an upper level protocol is installing a route X that needs to be
route replaced and at the same time the same or another protocol installs a
different route that depends on route X for nexthop resolution can leave
us with a state where the route is not accepted because zebra is still
really early in the route replace semantics ( route X is still on the work
Queue to be processed ) then the dependent route would not be installed.
This came up in the bgp_default_originate test cases frequently.
Further extendd the ROUTE_ENTR_ROUTE_REPLACING flag to cover this case
as well. This has come up because the early route processing queueing
that was implemented late last year.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit af80201876)
If the command is ipv6 nht protocol route-map rmap, this parameter should use AFI_IP6
Signed-off-by: guozhongfeng <guozhongfeng.gzf@alibaba-inc.com>
(cherry picked from commit 1193611f8e)
When running bgp_always_compare_med, I am frequently seeing a crash
After running with valgrind I am seeing this and a invalid write
immediately after this as well.
==311743== Invalid read of size 2
==311743== at 0x4992421: route_map_counter_decrement (routemap.c:3308)
==311743== by 0x35664D: peer_route_map_unset (bgpd.c:7259)
==311743== by 0x306546: peer_route_map_unset_vty (bgp_vty.c:8037)
==311743== by 0x3066AC: no_neighbor_route_map (bgp_vty.c:8081)
==311743== by 0x49078DE: cmd_execute_command_real (command.c:990)
==311743== by 0x4907A63: cmd_execute_command (command.c:1050)
==311743== by 0x490801F: cmd_execute (command.c:1217)
==311743== by 0x49C5535: vty_command (vty.c:551)
==311743== by 0x49C7459: vty_execute (vty.c:1314)
==311743== by 0x49C97D1: vtysh_read (vty.c:2223)
==311743== by 0x49BE5E2: event_call (event.c:1995)
==311743== by 0x494786C: frr_run (libfrr.c:1204)
==311743== by 0x1F7655: main (bgp_main.c:505)
==311743== Address 0x9ec2180 is 64 bytes inside a block of size 120 free'd
==311743== at 0x484B27F: free (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==311743== by 0x495A1BA: qfree (memory.c:130)
==311743== by 0x498D412: route_map_free_map (routemap.c:748)
==311743== by 0x498D176: route_map_add (routemap.c:672)
==311743== by 0x498D79B: route_map_get (routemap.c:857)
==311743== by 0x499C256: lib_route_map_create (routemap_northbound.c:102)
==311743== by 0x49702D8: nb_callback_create (northbound.c:1234)
==311743== by 0x497107F: nb_callback_configuration (northbound.c:1578)
==311743== by 0x4971693: nb_transaction_process (northbound.c:1709)
==311743== by 0x496FCF4: nb_candidate_commit_apply (northbound.c:1103)
==311743== by 0x496FE4E: nb_candidate_commit (northbound.c:1136)
==311743== by 0x497798F: nb_cli_classic_commit (northbound_cli.c:49)
==311743== by 0x4977B4F: nb_cli_pending_commit_check (northbound_cli.c:88)
==311743== by 0x49078C1: cmd_execute_command_real (command.c:987)
==311743== by 0x4907B44: cmd_execute_command (command.c:1068)
==311743== by 0x490801F: cmd_execute (command.c:1217)
==311743== by 0x49C5535: vty_command (vty.c:551)
==311743== by 0x49C7459: vty_execute (vty.c:1314)
==311743== by 0x49C97D1: vtysh_read (vty.c:2223)
==311743== by 0x49BE5E2: event_call (event.c:1995)
==311743== by 0x494786C: frr_run (libfrr.c:1204)
==311743== by 0x1F7655: main (bgp_main.c:505)
==311743== Block was alloc'd at
==311743== at 0x484DA83: calloc (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==311743== by 0x495A068: qcalloc (memory.c:105)
==311743== by 0x498D0C8: route_map_new (routemap.c:646)
==311743== by 0x498D128: route_map_add (routemap.c:658)
==311743== by 0x498D79B: route_map_get (routemap.c:857)
==311743== by 0x499C256: lib_route_map_create (routemap_northbound.c:102)
==311743== by 0x49702D8: nb_callback_create (northbound.c:1234)
==311743== by 0x497107F: nb_callback_configuration (northbound.c:1578)
==311743== by 0x4971693: nb_transaction_process (northbound.c:1709)
==311743== by 0x496FCF4: nb_candidate_commit_apply (northbound.c:1103)
==311743== by 0x496FE4E: nb_candidate_commit (northbound.c:1136)
==311743== by 0x497798F: nb_cli_classic_commit (northbound_cli.c:49)
==311743== by 0x4977B4F: nb_cli_pending_commit_check (northbound_cli.c:88)
==311743== by 0x49078C1: cmd_execute_command_real (command.c:987)
==311743== by 0x4907B44: cmd_execute_command (command.c:1068)
==311743== by 0x490801F: cmd_execute (command.c:1217)
==311743== by 0x49C5535: vty_command (vty.c:551)
==311743== by 0x49C7459: vty_execute (vty.c:1314)
==311743== by 0x49C97D1: vtysh_read (vty.c:2223)
==311743== by 0x49BE5E2: event_call (event.c:1995)
==311743== by 0x494786C: frr_run (libfrr.c:1204)
Effectively the route_map that is being stored has been freed already
but we have not cleaned up properly yet. Go through and clean the
code up by ensuring that the pointer actually exists instead of trusting
it does when doing the decrement operation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 2ba2c284ba)
There's a workaround in the code from a bug from back in 2004, it ends
and re-enters config mode anytime an `exit` is done from a level below
the top-level config node (e.g., from a `router isis` node). We need to
re-enter config mode with or without a lock according to how we actually
entered it to begin with.
fixes#13920
Signed-off-by: Christian Hopps <chopps@labn.net>
The lock/unlocks are being done short-circuit so they are never pending;
however, the handling of the unlock notification was always resuming the command
if pending was set. In all cases pending is set for another command. For example
implicit commit locks then when notified its done unlocks which was clearing the
set-config pending flag and resuming that command incorrectly.
Signed-off-by: Christian Hopps <chopps@labn.net>
- move from the static allocated and initialize xpath map to using the
new darr (dynamic array) code.
Signed-off-by: Christian Hopps <chopps@labn.net>
(cherry picked from commit 5447d16b73)
Currently, "on-match (next|goto)" only works if already present in a
route-map entry when the route-map is applied to the routes. However, if
the command is added to an existing route-map entry, the route-map is
not reapplied to the routes in order to accommodate the changes. And
service restart is needed. The problem is that setting the command
doesn't signal about the change to the listener (i.e. to a routing
daemon).
With this fix, signal to the listener about addition of "on-match
(next|goto)" to a route-map entry.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
(cherry picked from commit 633eb6ee77)
The bgp vpn policy had some attribute not free when the function bgp_free was called leading to memory leak as shown below.
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251:Direct leak of 592 byte(s) in 2 object(s) allocated from:
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #0 0x7f4b7ae92037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #1 0x7f4b7aa96e38 in qcalloc lib/memory.c:105
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #2 0x7f4b7aa9bec9 in srv6_locator_chunk_alloc lib/srv6.c:135
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #3 0x56396f8e56f8 in ensure_vrf_tovpn_sid_per_af bgpd/bgp_mplsvpn.c:752
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #4 0x56396f8e608a in ensure_vrf_tovpn_sid bgpd/bgp_mplsvpn.c:846
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #5 0x56396f8e075d in vpn_leak_postchange bgpd/bgp_mplsvpn.h:259
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #6 0x56396f8f3e5b in vpn_leak_postchange_all bgpd/bgp_mplsvpn.c:3397
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #7 0x56396fa920ef in bgp_zebra_process_srv6_locator_chunk bgpd/bgp_zebra.c:3238
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #8 0x7f4b7abb2913 in zclient_read lib/zclient.c:4134
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #9 0x7f4b7ab62010 in thread_call lib/thread.c:1991
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #10 0x7f4b7aa5a418 in frr_run lib/libfrr.c:1185
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #11 0x56396f7d756d in main bgpd/bgp_main.c:505
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #12 0x7f4b7a479d09 in __libc_start_main ../csu/libc-start.c:308
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251-
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251:Direct leak of 32 byte(s) in 2 object(s) allocated from:
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #0 0x7f4b7ae92037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #1 0x7f4b7aa96e38 in qcalloc lib/memory.c:105
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #2 0x56396f8e31b8 in vpn_leak_zebra_vrf_sid_update_per_af bgpd/bgp_mplsvpn.c:386
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #3 0x56396f8e3ae8 in vpn_leak_zebra_vrf_sid_update bgpd/bgp_mplsvpn.c:448
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #4 0x56396f8e09b0 in vpn_leak_postchange bgpd/bgp_mplsvpn.h:271
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #5 0x56396f8f3e5b in vpn_leak_postchange_all bgpd/bgp_mplsvpn.c:3397
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #6 0x56396fa920ef in bgp_zebra_process_srv6_locator_chunk bgpd/bgp_zebra.c:3238
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #7 0x7f4b7abb2913 in zclient_read lib/zclient.c:4134
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #8 0x7f4b7ab62010 in thread_call lib/thread.c:1991
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #9 0x7f4b7aa5a418 in frr_run lib/libfrr.c:1185
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #10 0x56396f7d756d in main bgpd/bgp_main.c:505
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #11 0x7f4b7a479d09 in __libc_start_main ../csu/libc-start.c:308
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251-
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251:Direct leak of 32 byte(s) in 2 object(s) allocated from:
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #0 0x7f4b7ae92037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #1 0x7f4b7aa96e38 in qcalloc lib/memory.c:105
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #2 0x56396f8e5730 in ensure_vrf_tovpn_sid_per_af bgpd/bgp_mplsvpn.c:753
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #3 0x56396f8e608a in ensure_vrf_tovpn_sid bgpd/bgp_mplsvpn.c:846
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #4 0x56396f8e075d in vpn_leak_postchange bgpd/bgp_mplsvpn.h:259
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #5 0x56396f8f3e5b in vpn_leak_postchange_all bgpd/bgp_mplsvpn.c:3397
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #6 0x56396fa920ef in bgp_zebra_process_srv6_locator_chunk bgpd/bgp_zebra.c:3238
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #7 0x7f4b7abb2913 in zclient_read lib/zclient.c:4134
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #8 0x7f4b7ab62010 in thread_call lib/thread.c:1991
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #9 0x7f4b7aa5a418 in frr_run lib/libfrr.c:1185
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #10 0x56396f7d756d in main bgpd/bgp_main.c:505
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251- #11 0x7f4b7a479d09 in __libc_start_main ../csu/libc-start.c:308
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251-
./bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.bgpd.asan.603251-SUMMARY: AddressSanitizer: 656 byte(s) leaked in 6 allocation(s).
Signed-off-by: ryndia <dindyalsarvesh@gmail.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When `dplane_fpm_nl` receives a route, it allocates memory for a dplane
context and calls `netlink_route_change_read_unicast_internal` without
initializing the `intf_extra_list` contained in the dplane context. If
`netlink_route_change_read_unicast_internal` is not able to process the
route, we call `dplane_ctx_fini` to free the dplane context. This causes
a crash because `dplane_ctx_fini` attempts to access the intf_extra_list
which is not initialized.
To solve this issue, we can call `dplane_ctx_route_init`to initialize
the dplane route context properly, just after the dplane context
allocation.
(gdb) bt
#0 0x0000555dd5ceae80 in dplane_intf_extra_list_pop (h=0x7fae1c007e68) at ../zebra/zebra_dplane.c:427
#1 dplane_ctx_free_internal (ctx=0x7fae1c0074b0) at ../zebra/zebra_dplane.c:724
#2 0x0000555dd5cebc99 in dplane_ctx_free (pctx=0x7fae2aa88c98) at ../zebra/zebra_dplane.c:869
#3 dplane_ctx_free (pctx=0x7fae2aa88c98, pctx@entry=0x7fae2aa78c28) at ../zebra/zebra_dplane.c:855
#4 dplane_ctx_fini (pctx=pctx@entry=0x7fae2aa88c98) at ../zebra/zebra_dplane.c:890
#5 0x00007fae31e93f29 in fpm_read (t=) at ../zebra/dplane_fpm_nl.c:605
#6 0x00007fae325191dd in thread_call (thread=thread@entry=0x7fae2aa98da0) at ../lib/thread.c:2006
#7 0x00007fae324c42b8 in fpt_run (arg=0x555dd74777c0) at ../lib/frr_pthread.c:309
#8 0x00007fae32405ea7 in start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0
#9 0x00007fae32325a2f in clone () from /lib/x86_64-linux-gnu/libc.so.6
Fixes: #13754
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
(cherry picked from commit 7f2dec4f09)
The function `dplane_ctx_route_init` initializes a dplane route context
from the route object passed as an argument. Let's abstract this
function to allow initializing the dplane route context without actually
copying a route object.
This allows us to use this function for initializing a dplane route
context when we don't have any route to copy in it.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
(cherry picked from commit 745a0fcbb2)
Check `show ip route` for specific kernel routes after
the interface as their nexthop changes vrf.
After moving interface's vrf, there should be no kernel
route in old vrf.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
(cherry picked from commit 019ac03e5b)
When changing one interface's vrf, the kernel routes are wrongly kept
in old vrf. Finally, the forwarding table in that old vrf can't forward
traffic correctly for those residual entries.
Follow these steps to make this problem happen:
( Firstly, "x1" interface of default vrf is with address of "6.6.6.6/24". )
```
anlan# ip route add 4.4.4.0/24 via 6.6.6.8 dev x1
anlan# ip link add vrf1 type vrf table 1
anlan# ip link set vrf1 up
anlan# ip link set x1 master vrf1
```
Then check `show ip route`, the route of "4.4.4.0/24" is still selected
in default vrf.
If the interface goes down, the kernel routes will be reevaluated. Those
kernel routes with active interface of nexthop can be kept no change, it
is a fast path. Otherwise, it enters into slow path to do careful examination
on this nexthop.
After the interface's vrf had been changed into new vrf, the down message of
this interface came. It means the interface is not in old vrf although it
still exists during that checking, so the kernel routes should be dropped
after this nexthop matching against a default route in slow path. But, in
current code they are wrongly kept in fast path for not checking vrf.
So, modified the checking active nexthop with vrf comparision for the interface
during reevaluation.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
(cherry picked from commit 098519caf8)
There are relaxed nexthop requirements for kernel routes because we
trust kernel routes.
Two minor changes for kernel routes:
1. `if_is_up()` is one of the necessary conditions for `if_is_operative()`.
Here, we can remove this unnecessary check for clarity.
2. Since `nexthop_active()` doesn't distinguish whether it is kernel route,
modified the corresponding comment in it.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
(cherry picked from commit caf896d6ef)
