a) Rename rib_init to zebra_rib_init() to better follow how
things are named
b) on shutdown cycle through the rib_dplane_q and free
up any contexts sitting in it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
INTERFACE_NAMSIZ is just a redefine of IFNAMSIZ and IFNAMSIZ
is the standard for interface name length on all platforms
that FRR currently compiles on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The fpm code path in building a ecmp route for evpn has
a bug that caused it to not add the encap attribute to
the netlink message. See #f0f7b285b99dbd971400d33feea007232c0bd4a9
for the single path case being fixed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Replace several switch blocks that contain every dplane opcode
with simpler sets of if()s. In these cases the code only
uses a couple of opcodes.
Signed-off-by: Mark Stapp <mjs@labn.net>
Fix memory leaks by allocating `json_segs` conditionally on `nexthop->nh_srv6->seg6_segs`.
The previous code allocated memory even when not in use or attached to the JSON tree.
The ASan leak log for reference:
```
Direct leak of 3240 byte(s) in 45 object(s) allocated from:
#0 0x7f6e84a35d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f6e83de9e6f in json_object_new_array (/lib/x86_64-linux-gnu/libjson-c.so.3+0x3e6f)
#2 0x564dcab5c1a6 in vty_show_ip_route zebra/zebra_vty.c:705
#3 0x564dcab5cc71 in do_show_route_helper zebra/zebra_vty.c:955
#4 0x564dcab5d418 in do_show_ip_route zebra/zebra_vty.c:1039
#5 0x564dcab63ee5 in show_route_magic zebra/zebra_vty.c:1878
#6 0x564dcab63ee5 in show_route zebra/zebra_vty_clippy.c:659
#7 0x7f6e843b6fb1 in cmd_execute_command_real lib/command.c:978
#8 0x7f6e843b7475 in cmd_execute_command lib/command.c:1036
#9 0x7f6e843b78f4 in cmd_execute lib/command.c:1203
#10 0x7f6e844dfe3b in vty_command lib/vty.c:594
#11 0x7f6e844e02e6 in vty_execute lib/vty.c:1357
#12 0x7f6e844e8bb7 in vtysh_read lib/vty.c:2365
#13 0x7f6e844d3b7a in event_call lib/event.c:1965
#14 0x7f6e844172b0 in frr_run lib/libfrr.c:1214
#15 0x564dcaa50e81 in main zebra/main.c:488
#16 0x7f6e837f7c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Indirect leak of 11520 byte(s) in 45 object(s) allocated from:
#0 0x7f6e84a35d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f6e83de88c0 in array_list_new (/lib/x86_64-linux-gnu/libjson-c.so.3+0x28c0)
Indirect leak of 1080 byte(s) in 45 object(s) allocated from:
#0 0x7f6e84a35d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f6e83de8897 in array_list_new (/lib/x86_64-linux-gnu/libjson-c.so.3+0x2897)
```
Signed-off-by: Keelan Cannoo <keelan.cannoo@icloud.com>
Signed-off-by: ryndia <dindyalsarvesh@gmail.com>
a) nl_batch_tx_buf was not being freed
b) the mlag_fifo was not being freed
c) the vrf->ns_ctxt was not being freed
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We cannot build on apple machines at all due
to our usage of some gcc extensions that will
probably never see the light of day again.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The headers associated with netlink code
really only belong in those that need it.
Move these headers out of lib/zebra.h and
into more appropriate places. bgp's usage
of the RT_TABLE_XXX defines are probably not
appropriate and will be cleaned up in future
commits.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The nexthop group route replace operation was made consistent
across all versions of the kernel. A v6 route replacement
does not need to do a delete than add when using nexthop
groups
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The v6_rr_semantics variable was being set but never
reported and had to be inferred from watching netlink
messages to the kernel. Let's add a bit of code
to `show zebra` so that we can know how it is being
used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Without this patch, static ARP entries remain active even if the interface is
down, but the kernel already removed them.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Recent Changes added the -Wimplicit-fallthrough flag
to FRR's compilation. Implementor does not build with
lua support and as such this one was missed in the compilation
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
...so that multiple functions can be subscribed.
The create/destroy hooks are renamed to real/unreal because that's what
they *actually* signal.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Create Local routes in FRR:
S 0.0.0.0/0 [1/0] via 192.168.119.1, enp39s0, weight 1, 00:03:46
K>* 0.0.0.0/0 [0/100] via 192.168.119.1, enp39s0, 00:03:51
O 192.168.119.0/24 [110/100] is directly connected, enp39s0, weight 1, 00:03:46
C>* 192.168.119.0/24 is directly connected, enp39s0, 00:03:51
L>* 192.168.119.224/32 is directly connected, enp39s0, 00:03:51
O 192.168.119.229/32 [110/100] via 0.0.0.0, enp39s0 inactive, weight 1, 00:03:46
C>* 192.168.119.229/32 is directly connected, enp39s0, 00:03:46
Create ability to redistribute local routes.
Modify tests to support this change.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
A dead code. When `is_table_direct` is true, vrf_id is always VRF_DEFAULT.
So this block is never called.
CID 1570863.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
This is addressing remaining places returning
empty dict, earlier PR-13214 addressed few places.
Code has been changed to return {} for all the evpn clis
when evpn is disabled or no entry available.
```
cumulus@r2:mgmt:~$ sudo vtysh -c "show evpn json"
cumulus@r2:mgmt:~$
```
After Fix:-
```
cumulus@r1:mgmt:~$ sudo vtysh -c "show evpn json"
{
}
cumulus@r1:mgmt:~$
```
Ticket:#3417955
Issue:3417955
Testing: UT done
Signed-off-by: Sindhu Parvathi Gopinathan's <sgopinathan@nvidia.com>
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Currently in the single nexthop case w/ evpn sending
down via the FPM the encap type is not being set
for the nexthop.
This looks like the result of some code reorg for the
nexthop happened but the fpm failed to be accounted for.
Let's just move the encap type encoding to where it
will happen.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Zebra currently does a shortest prefix match for
resolving nexthops for a prefix. This is typically
an ok thing to do but fails in several specific scenarios.
If a nexthop matches to a route that is not usable, nexthop
resolution just gives up and refuses to use that particular
route. For example if zebra currently has a covering prefix
say a 10.0.0.0/8. And about the same time it receives a
10.1.0.0/16 ( a more specific than the /8 ) and another
route A, who's nexthop is 10.1.1.1. Imagine the 10.1.0.0/16
is processed enough to know we want to install it and the
prefix is sent to the dataplane for installation( it is queued )
and then route A is processed, nexthop resolution will fail
and the route A will be left in limbo as uninstallable.
Let's modify the nexthop resolution code in zebra such that
if a nexthop's most specific match is unusable, continue looking
up the table till we get to the 0.0.0.0/0 route( if it's even
installed ). If we find a usable route for the nexthop accept
it and use it.
The bgp_default_originate topology test is frequently failing
with this exact problem:
B>* 0.0.0.0/0 [200/0] via 192.168.1.1, r2-r1-eth0, weight 1, 00:00:21
B 1.0.1.17/32 [200/0] via 192.168.0.1 inactive, weight 1, 00:00:21
B>* 1.0.2.17/32 [200/0] via 192.168.1.1, r2-r1-eth0, weight 1, 00:00:21
C>* 1.0.3.17/32 is directly connected, lo, 00:02:00
B>* 1.0.5.17/32 [20/0] via 192.168.2.2, r2-r3-eth1, weight 1, 00:00:32
B>* 192.168.0.0/24 [200/0] via 192.168.1.1, r2-r1-eth0, weight 1, 00:00:21
B 192.168.1.0/24 [200/0] via 192.168.1.1 inactive, weight 1, 00:00:21
C>* 192.168.1.0/24 is directly connected, r2-r1-eth0, 00:02:00
C>* 192.168.2.0/24 is directly connected, r2-r3-eth1, 00:02:00
B>* 192.168.3.0/24 [20/0] via 192.168.2.2, r2-r3-eth1, weight 1, 00:00:32
B 198.51.1.1/32 [200/0] via 192.168.0.1 inactive, weight 1, 00:00:21
B>* 198.51.1.2/32 [20/0] via 192.168.2.2, r2-r3-eth1, weight 1, 00:00:32
Notice that the 1.0.1.17/32 route is inactive but the nexthop
192.168.0.1 is covered by both the 192.168.0.0/24 prefix( shortest match )
*and* the 0.0.0.0/0 route ( longest match ). When looking at the logs
the 1.0.1.17/32 route was not being installed because the matching
route was not in a usable state, which is because the 192.168.0.0/24
route was in the process of being installed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Redistributing routes from a specific routing table to a particular routing
protocol necessitates copying route entries to the main routing table using the
"ip import-table" command. Once copied, these routes are assigned a distinct
"table" route type, which the "redistribute table" command of the routing
protocol then picks up.
For illustration, here is a configuration that showcases the use of
"import-table" and "redistribute":
> # show running-config
> [..]
> ip route 172.31.0.10/32 172.31.1.10 table 100
> router bgp 65500
> address-family ipv4 unicast
> redistribute table 100
> exit-address-family
> exit
> ip import-table 100
>
> # show ip route vrf default
> [..]
> T[100]>* 172.31.0.10/32 [15/0] via 172.31.1.10, r2-eth1, weight 1, 00:00:05
However, this method has inherent constraints:
- The 'import-table' parameter only handles route table id up to 252. The
253/254/255 table ids are reserved in the linux system, and adding other table
IDs above 255 leads to a design issue, where the size of some tables is directly
related to the maximum number of table ids to support.
- Duplicated route entries might interfere with original default table routes,
leading to potential conflicts. There is no guarantee that the zebra RIB will
favor these duplicated entries during redistribution.
- There are cases where the table ID can be checked independently of the default
routing table, as seen in Linux where the "ip rule" command is able to divert
traffic to that routing table. In that case, there is no need to duplicate route
entries in the default routing table.
To overcome these issues, a new redistribution type is proposed to redistribute
route entries directly from a specified routing table, eliminating the need for
an initial import into the default table.
Add a 'ZEBRA_ROUTE_TABLE_DIRECT' type to the 'REDISTRIBUTE' ZAPI messages. It
allows sending routes from a given non default table ID from zebra to a routing
daemon. The destination routing protocol table must be the default table.
The redistributed route inherit from the default distance value of 14: this is
the distance value reserved for routes redistributed via ROUTE_TABLE_DIRECT.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A static label allocation should not be accepted if the desired range
conflicts with the configured dynamic-block configuration.
Do not accept such label requests, only when dynamic blocks are
configured.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This commit adds support for the label chunk allocation in
the configured dynamic block range.
An additional check ensures the upper bound does not go
over the upper bound of the dynamic-block.
Otherwise, a chunk is created with the lower bound set
to the first label element available in the defined
range.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The label chunk algorithm needs to be revisited to support a
configured dynamic-block or the default one.
Reuse the 'lbl_mgr.dynamic_block_[start/end]' variables,
whereever needed, and simplify the algorithm.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Hardset label values (eg. ISIS Segment-routing label blocks,
hardset BGP L3VPN service label) may conflict with label chunks
dynamically allocated by zebra.
Add an optional 'mpls label dynamic-block' command to let the user
define a range that is not in conflict with the hardset values.
Restarting control planes is recommended when dynamic label
chunks are already allocated. Command is aborted when any hardset
label chunks conflict with the dynamic block.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
After ISIS first allocates a label chunk at [1000;2000],
the '16' label value is not used when BGP tries to
allocate a label chunk in auto mode. This does not happen
when BGP is the only one to do the label allocation.
When a label chunk has been accepted, the next label
request checks if there is room space before the existing
label chunk, and uses the lower label value to 17, and not
16.
Fix this by changing the previous range end 'prev_end' label
value to 15 which is the end of the reserved MPLS label
range.
Fixes: 3c84497943 ("zebra: label manager should never return a reserved block")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The zebra label manager stores the mpls label chunks,
but does not record if the label request was for a
dynamic or a static chunk.
For all label requests accepted, mark the label chunk
if the 'base' parameter is set to MPLS_LABEL_BASE_ANY,
unmark it otherwise.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When the label manager is unable to provide a label chunk to
a routing service, an error message is displayed:
> Oct 11 11:47:27 vsr zebra[163745]: [YMY6E-K9JYD][EC 4043309085] Unable to assign Label Chunk to bgp instance 0
There is missing information on the range that was requested.
Add this information in the log message.
> Oct 11 11:47:27 vsr zebra[163745]: [YMY6E-K9JYD][EC 4043309085] Unable to assign Label Chunk 60 - 60 to bgp instance 0
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This function lm_get_chunk_response() is only called
by label_manager_get_chunk(). Let us move the code of
the function in the caller.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Also:
- replace all /* fallthrough */ comments with portable fallthrough;
pseudo keyword to accomodate both gcc and clang
- add missing break; statements as required by older versions of gcc
- cleanup some code to remove unnecessary fallthrough
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The weight scale value might be useful to have it
change it's behavior at a later time or controlled
by something depending on how FRR is compiled/ran.
Let's start that process
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently underlying asics get into a bit of trouble when the
nexthop weight passed down varies wildly between the different
numbers. Let's normalize the weight values between 1 and 255
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Separate commit for clang-format cleanup of string
messages because I felt it would hide the actual
changes being made to the system.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We may receive some xxxCHAIN netlink messages, but we ignore
them (currently). Add them to the basic handler callback so
that we don't log errors about them.
Signed-off-by: Mark Stapp <mjs@labn.net>
`ng` was not properly freed, leading to a memory leak.
The commit calls `nexthop_group_delete` to free memory associated with `ng`.
The ASan leak log for reference:
```
***********************************************************************************
Address Sanitizer Error detected in isis_topo1.test_isis_topo1/r5.asan.zebra.24308
=================================================================
==24308==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7f4f47b43d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f4f4753c0a8 in qcalloc lib/memory.c:105
#2 0x7f4f47559526 in nexthop_group_new lib/nexthop_group.c:270
#3 0x562ded6a39d4 in zebra_add_import_table_entry zebra/redistribute.c:681
#4 0x562ded787c35 in rib_link zebra/zebra_rib.c:3972
#5 0x562ded787c35 in rib_addnode zebra/zebra_rib.c:3993
#6 0x562ded787c35 in process_subq_early_route_add zebra/zebra_rib.c:2860
#7 0x562ded787c35 in process_subq_early_route zebra/zebra_rib.c:3138
#8 0x562ded787c35 in process_subq zebra/zebra_rib.c:3178
#9 0x562ded787c35 in meta_queue_process zebra/zebra_rib.c:3228
#10 0x7f4f475f7118 in work_queue_run lib/workqueue.c:266
#11 0x7f4f475dc7f2 in event_call lib/event.c:1969
#12 0x7f4f4751f347 in frr_run lib/libfrr.c:1213
#13 0x562ded69e818 in main zebra/main.c:486
#14 0x7f4f468ffc86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Indirect leak of 152 byte(s) in 1 object(s) allocated from:
#0 0x7f4f47b43d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f4f4753c0a8 in qcalloc lib/memory.c:105
#2 0x7f4f475510ad in nexthop_new lib/nexthop.c:376
#3 0x7f4f475539c5 in nexthop_dup lib/nexthop.c:914
#4 0x7f4f4755b27a in copy_nexthops lib/nexthop_group.c:444
#5 0x562ded6a3a1c in zebra_add_import_table_entry zebra/redistribute.c:682
#6 0x562ded787c35 in rib_link zebra/zebra_rib.c:3972
#7 0x562ded787c35 in rib_addnode zebra/zebra_rib.c:3993
#8 0x562ded787c35 in process_subq_early_route_add zebra/zebra_rib.c:2860
#9 0x562ded787c35 in process_subq_early_route zebra/zebra_rib.c:3138
#10 0x562ded787c35 in process_subq zebra/zebra_rib.c:3178
#11 0x562ded787c35 in meta_queue_process zebra/zebra_rib.c:3228
#12 0x7f4f475f7118 in work_queue_run lib/workqueue.c:266
#13 0x7f4f475dc7f2 in event_call lib/event.c:1969
#14 0x7f4f4751f347 in frr_run lib/libfrr.c:1213
#15 0x562ded69e818 in main zebra/main.c:486
#16 0x7f4f468ffc86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
SUMMARY: AddressSanitizer: 184 byte(s) leaked in 2 allocation(s).
***********************************************************************************
```
Signed-off-by: Keelan Cannoo <keelan.cannoo@icloud.com>
When netlink_link_change() errors out for a new link for
interface without MTU set, the allocated ctx is not freed..
Adding code for correctness
Ticket# 3628313
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Currently when one interface changes its VRF, zebra will send these messages to
all daemons in *order*:
1) `ZEBRA_INTERFACE_DELETE` ( notify them delete from old VRF )
2) `ZEBRA_INTERFACE_VRF_UPDATE` ( notify them move from old to new VRF )
3) `ZEBRA_INTERFACE_ADD` ( notify them added into new VRF )
When daemons deal with `VRF_UPDATE`, they use
`zebra_interface_vrf_update_read()->if_lookup_by_name()`
to check the interface exist or not in old VRF. This check will always return
*NULL* because `DELETE` ( deleted from old VRF ) is already done, so can't
find this interface in old VRF.
Send `VRF_UPDATE` is redundant and unuseful. `DELETE` and `ADD` are enough,
they will deal with RB tree, so don't send this `VRF_UPDATE` message when
vrf changes.
Since all daemons have good mechanism to deal with changing vrf, and don't
use this `VRF_UPDATE` mechanism. So, it is safe to completely remove
all the code with `VRF_UPDATE`.
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Include a zclient value in the hash and tree key computations
for iprules in zebra: clients may collide without this.
Signed-off-by: Mark Stapp <mjs@labn.net>
The iprule/pbr rule object has a vrf id, and zebra uses
that internally, but the vrf id isn't returned to clients
who install rules and are waiting for results. Include the
vrf_id sent by the client in the zapi result notification
message; update the existing clients so they decode the id.
Signed-off-by: Mark Stapp <mjs@labn.net>
When interface addresses change, we examine nhgs associated
with the interface in case they need to be reinstalled. As
part of that, we may need to reinstall ecmp nhgs that use the
interface being examined - but not always.
Signed-off-by: Mark Stapp <mjs@labn.net>
In zebra/label_manager.c the releasing of the label chunk is done by
disowning the chunk to the system. The presence of this system label
chunk will cause label assignment to fail for this use case example:
label chunk ospf: 300-320
label chunk system: 510-520
label chunk isis: 1200-1300
Then we try to allocate the chunk 500-530, we get this error:
"Allocation of mpls label chunk [500/530] failed"
The error is raised when the below condition is true:
/* if chunk is used, cannot honor request */
if (lmc->proto != NO_PROTO)
return NULL;
Delete the label chunk instead of disowning it when the label releasing
is done.
Signed-off-by: Farid MIHOUB <farid.mihoub@6wind.com>
Add the new command "show debugging labeltable" to show allocated label
chunks in the label table managed with label_manager.c
Signed-off-by: Farid Mihoub <farid.mihoub@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Provide skeleton hooks for nexthop segments
Those hooks address seg6 segs stack entries defined in the YANG
model
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
Append zebra and lib to use muliple SRv6 segs SIDs, and keep one
seg SID for bgpd and sharpd.
Note: bgpd and sharpd compilation relies on the lib and zebra files,
i.e if we separate this: lib or zebra or bgpd or sharpd in different
commits - this will not compile.
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
When zebra receives a Netlink message containing a seg6local nexthop,
let's use the default values for optional attributes `lcblock_len` and
`lcnode_fn_len`, if they are not specified.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
When zebra receives a Netlink message containing a seg6local nexthop,
let's use the default values for optional attributes `lcblock_len` and
`lcnode_fn_len`, if they are not specified.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend the `parse_encap_seg6local` function to parse SRv6 flavors
information contained in the Netlink message.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Only attempt to install in netlink iprules that include supported
actions; ignore requests with actions that aren't supported by
netlink.
Signed-off-by: Mark Stapp <mjs@labn.net>
If the kernel sends us bad data then the kind_str
will be NULL and a later strcmp operation will
cause a crash.
As a note: If the kernel is not sending us properly
formated netlink messages then we got bigger problems
than zebra crashing. But at least let's prevent zebra
from crashing.
Reported-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the txqlen attribute to the common interface struct. Capture
the value in zebra, and distribute it through the interface lib
module's zapi messaging.
Signed-off-by: Mark Stapp <mjs@labn.net>
During replace of a NHE from upper proto in zebra_nhg_proto_add(),
- rib_handle_nhg_replace() is invoked with old NHE where we walk all
RNs/REs & replace the re->nhe whose address points to old NHE.
- In this walk, if prev re->nhe refcnt is decremented to 0, we free up
the memory which the old NHE is pointing to.
Later in zebra_nhg_proto_add(), we end up accessing this freed memory
and crash.
Logs:
1380766 2023/08/16 22:34:11.994671 ZEBRA: [WDEB1-93HCZ] zebra_nhg_decrement_ref: nhe 0x56091d890840 (70312519[2756/2762/2810]) 2 => 1
1380773 2023/08/16 22:34:11.994678 ZEBRA: [WDEB1-93HCZ] zebra_nhg_decrement_ref: nhe 0x56091d890840 (70312519[2756/2762/2810]) 1 => 0
1380777 2023/08/16 22:34:11.994844 ZEBRA: [JE46R-G2NEE] zebra_nhg_release: nhe 0x56091d890840 (70312519[2756/2762/2810])
1380778 2023/08/16 22:34:11.994849 ZEBRA: [SCDBM-4H062] zebra_nhg_free: nhe 0x56091d890840 (70312519[2756/2762/2810]), refcnt 0
1380782 2023/08/16 22:34:11.995000 ZEBRA: [SCDBM-4H062] zebra_nhg_free: nhe 0x56091d890840 (0[]), refcnt 0
1380783 2023/08/16 22:34:11.995011 ZEBRA: lib/memory.c:84: mt_count_free(): assertion (mt->n_alloc) failed
Backtrace:
0 0x00007f833f5f48eb in raise () from /lib/x86_64-linux-gnu/libc.so.6
1 0x00007f833f5df535 in abort () from /lib/x86_64-linux-gnu/libc.so.6
2 0x00007f833f636648 in ?? () from /lib/x86_64-linux-gnu/libc.so.6
3 0x00007f833f63cd6a in ?? () from /lib/x86_64-linux-gnu/libc.so.6
4 0x00007f833f63cfb4 in ?? () from /lib/x86_64-linux-gnu/libc.so.6
5 0x00007f833f63fbc8 in ?? () from /lib/x86_64-linux-gnu/libc.so.6
6 0x00007f833f64172a in malloc () from /lib/x86_64-linux-gnu/libc.so.6
7 0x00007f833f6c3fd2 in backtrace_symbols () from /lib/x86_64-linux-gnu/libc.so.6
8 0x00007f833f9013fc in zlog_backtrace_sigsafe (priority=priority@entry=2, program_counter=program_counter@entry=0x7f833f5f48eb <raise+267>) at lib/log.c:222
9 0x00007f833f901593 in zlog_signal (signo=signo@entry=6, action=action@entry=0x7f833f988ee8 "aborting...", siginfo_v=siginfo_v@entry=0x7ffee1ce4a30,
program_counter=program_counter@entry=0x7f833f5f48eb <raise+267>) at lib/log.c:154
10 0x00007f833f92dbd1 in core_handler (signo=6, siginfo=0x7ffee1ce4a30, context=<optimized out>) at lib/sigevent.c:254
11 <signal handler called>
12 0x00007f833f5f48eb in raise () from /lib/x86_64-linux-gnu/libc.so.6
13 0x00007f833f5df535 in abort () from /lib/x86_64-linux-gnu/libc.so.6
14 0x00007f833f958f96 in _zlog_assert_failed (xref=xref@entry=0x7f833f9e4080 <_xref.10705>, extra=extra@entry=0x0) at lib/zlog.c:680
15 0x00007f833f905400 in mt_count_free (mt=0x7f833fa02800 <MTYPE_NH_LABEL>, ptr=0x51) at lib/memory.c:84
16 mt_count_free (ptr=0x51, mt=0x7f833fa02800 <MTYPE_NH_LABEL>) at lib/memory.c:80
17 qfree (mt=0x7f833fa02800 <MTYPE_NH_LABEL>, ptr=0x51) at lib/memory.c:140
18 0x00007f833f90799c in nexthop_del_labels (nexthop=nexthop@entry=0x56091d776640) at lib/nexthop.c:563
19 0x00007f833f907b91 in nexthop_free (nexthop=0x56091d776640) at lib/nexthop.c:393
20 0x00007f833f907be8 in nexthops_free (nexthop=<optimized out>) at lib/nexthop.c:408
21 0x000056091c21aa76 in zebra_nhg_free_members (nhe=0x56091d890840) at zebra/zebra_nhg.c:1628
22 zebra_nhg_free (nhe=0x56091d890840) at zebra/zebra_nhg.c:1628
23 0x000056091c21bab2 in zebra_nhg_proto_add (id=<optimized out>, type=9, instance=<optimized out>, session=0, nhg=nhg@entry=0x56091d7da028, afi=afi@entry=AFI_UNSPEC)
at zebra/zebra_nhg.c:3532
24 0x000056091c22bc4e in process_subq_nhg (lnode=0x56091d88c540) at zebra/zebra_rib.c:2689
25 process_subq (qindex=META_QUEUE_NHG, subq=0x56091d24cea0) at zebra/zebra_rib.c:3290
26 meta_queue_process (dummy=<optimized out>, data=0x56091d24d4c0) at zebra/zebra_rib.c:3343
27 0x00007f833f9492c8 in work_queue_run (thread=0x7ffee1ce55a0) at lib/workqueue.c:285
28 0x00007f833f93f60d in thread_call (thread=thread@entry=0x7ffee1ce55a0) at lib/thread.c:2008
29 0x00007f833f8f9888 in frr_run (master=0x56091d068660) at lib/libfrr.c:1223
30 0x000056091c1b8366 in main (argc=12, argv=0x7ffee1ce5988) at zebra/main.c:551
Issue: 3492162
Ticket# 3492162
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
The code that handles the protodown_rc setting for
VRRP interfaces in zebra is sending a interface
to be set into a protodown state *before* the
interface has been learned by the kernel. Resulting
in crashes when the data plane sends the ctx back
to us saying hey man you are uncool.
Additionally change the protodown code to refuse
to send any protodown_rc codes *until* the interface
has actually been learned about from the kernel.
Ticket: 3582375
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Upon some internal testing some crashes were found. This fixes
the several crashes and normalizes the code to be closer in
it's execution pre and post changes to use the data plane.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The zebra_rmap_obj was storing the re->metric and allowing
matches against it, but in most cases it was just using 0.
Use the Route entries metric instead. This should fix
some bugs where a match metric never worked.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In all cases the instance is derived from the re pointer
and since the re pointer is already stored, let's just
remove it from the game and cut to the chase.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Replace the source_protocol with just saving a pointer to the re
in the `struct zebra_rmap_obj` data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The nexthop that is stored already knows it's nexthop and
in all cases the vrf id is derived from the nexthop->vrf_id
let's just cut to the chase and not do this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
If an import table route-map is trying to match against
a particular interface, The code is matching against
the actual vrf the route entry is in -vs- the vrf
the nexthop entry is in. Let's modify the code
to actually allow the import table entry to match
against the nexthops vrf.
Not working:
ip import-table 91
ip import-table 93 route-map FOO
no service integrated-vtysh-config
!
debug zebra events
!
interface green
ip address 192.168.4.3/24
exit
!
route-map FOO permit 10
match interface green
exit
eva# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
K>* 0.0.0.0/0 [0/100] via 192.168.119.1, enp13s0, 1d10h07m
T[91]>* 1.2.3.5/32 [15/0] via 192.168.119.1, enp13s0, 00:00:05
K>* 169.254.0.0/16 [0/1000] is directly connected, virbr0 linkdown, 1d16h34m
C>* 192.168.44.0/24 is directly connected, virbr1, 01:30:51
C>* 192.168.45.0/24 is directly connected, virbr2, 01:30:51
C>* 192.168.119.0/24 is directly connected, enp13s0, 1d16h34m
C>* 192.168.122.0/24 is directly connected, virbr0 linkdown, 01:30:51
eva# show ip route table 91
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
VRF default table 91:
K>* 1.2.3.5/32 [0/0] via 192.168.119.1, enp13s0, 00:00:15
eva# show ip route table 93
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
VRF default table 93:
K * 1.2.3.4/32 [0/0] via 192.168.4.5, green (vrf green), 00:03:05
Working:
eva# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
K>* 0.0.0.0/0 [0/100] via 192.168.119.1, enp13s0, 00:03:09
T[93]>* 1.2.3.4/32 [15/0] via 192.168.4.5, green (vrf green), 00:02:21
T[91]>* 1.2.3.5/32 [15/0] via 192.168.119.1, enp13s0, 00:02:26
K>* 169.254.0.0/16 [0/1000] is directly connected, virbr0, 00:03:09
C>* 192.168.44.0/24 is directly connected, virbr1, 00:03:09
C>* 192.168.45.0/24 is directly connected, virbr2, 00:03:09
C>* 192.168.119.0/24 is directly connected, enp13s0, 00:03:09
C>* 192.168.122.0/24 is directly connected, virbr0, 00:03:09
eva# show ip route table 91
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
VRF default table 91:
K * 1.2.3.5/32 [0/0] via 192.168.119.1, enp13s0, 00:03:12
eva# show ip route table 93
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
VRF default table 93:
K * 1.2.3.4/32 [0/0] via 192.168.4.5, green (vrf green), 00:03:14
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This structure is really the generic route map object for
handling routemaps in zebra. Let's name it appropriately.
Future commits will consolidate the data to using the
struct route_entry as part of this data instead of copying
bits and bobs of it. This will allow future work to
set/control the route_entry more directly.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The yang NB API does not handle the mpls configuration
on its leaf.
Add an mpls leaf to stick to the mpls configuration.
- true or false to mean if config
- not defined, means no config.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The 'no mpls' command wrongly assumes the user wants to disable
the mpls handling on the interface whereas this is just a config
knob that should mean 'I don't care with mpls'.
Fix this by adding a 'disable' option to the mpls command.
Fixes: 39ffa8e8e8 ("zebra: Add a `mpls enable` interface node command")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Bug is reporoduced in case of switching interfaces betwean VRFs.
ospf6d is enabled and configured in each VRF.
'dest' can be removed from the route node in the time when the same
route node waiting processing in another sub-queue.
A route node must only be in one sub-queue at a time.
Details:
1. Config:
interface if0
ipv6 address 2001:db8:cafe:2::2/64
ipv6 nat inside
ipv6 ospf6 area 0.0.0.51
ipv6 ospf6 cost 10
vrf test2
exit
!
interface if1
ipv6 address 2001:db8:cafe:4::1/64
ipv6 nat outside
ipv6 ospf6 area 0.0.0.0
ipv6 ospf6 cost 10
vrf test2
exit
!
router ospf6
ospf6 router-id 2.2.2.2
exit
!
router ospf6 vrf test1
ospf6 router-id 2.2.2.2
exit
!
router ospf6 vrf test2
ospf6 router-id 2.2.2.2
exit
I just quickly switched interfaces between different VRFs (default/test1/test2).
2. Log messages:
Aug 02 16:51:56 ubuntu zebra[386985]: [MFYWV-KH3MC] process_subq_early_route_add: (0:?):2001:db8:cafe:2::/64: Inserting route rn 0x56267593de90, re 0x56267595ae40 (connected) existing 0x0, same_count 0
Aug 02 16:51:56 ubuntu zebra[386985]: [Q4T2G-E2SQF] process_subq_early_route_add: dumping RE entry 0x56267595ae40 for 2001:db8:cafe:2::/64 vrf default(0)
Aug 02 16:51:56 ubuntu zebra[386985]: [GCGMT-SQR82] rib_link: (0:?):2001:db8:cafe:2::/64: rn 0x56267593de90 adding dest
Aug 02 16:51:56 ubuntu zebra[386985]: [JF0K0-DVHWH] rib_meta_queue_add: (0:254):2001:db8:cafe:2::/64: queued rn 0x56267593de90 into sub-queue Connected Routes
Aug 02 16:51:56 ubuntu zebra[386985]: [QE6V0-J8BG5] rib_delnode: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, re 0x56267595ae40, removing
Aug 02 16:51:56 ubuntu zebra[386985]: [KMPGN-JBRKW] rib_meta_queue_add: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90 is already queued in sub-queue Connected Routes
Aug 02 16:51:56 ubuntu zebra[386985]: [MFYWV-KH3MC] process_subq_early_route_add: (0:254):2001:db8:cafe:2::/64: Inserting route rn 0x56267593de90, re 0x56267595abf0 (ospf6) existing 0x0, same_count 1
Aug 02 16:51:56 ubuntu zebra[386985]: [Q4T2G-E2SQF] process_subq_early_route_add: dumping RE entry 0x56267595abf0 for 2001:db8:cafe:2::/64 vrf default(0)
Aug 02 16:51:56 ubuntu zebra[386985]: [KMPGN-JBRKW] rib_meta_queue_add: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90 is already queued in sub-queue Connected Routes
Aug 02 16:51:56 ubuntu zebra[386985]: [YEYFX-TDSC2] process_subq_early_route_add: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, removing unneeded re 0x56267595ae40
Aug 02 16:51:56 ubuntu zebra[386985]: [Y53JX-CBC5H] rib_unlink: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, re 0x56267595ae40
Aug 02 16:51:56 ubuntu zebra[386985]: [QE6V0-J8BG5] rib_delnode: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, re 0x56267595abf0, removing
Aug 02 16:51:56 ubuntu zebra[386985]: [JF0K0-DVHWH] rib_meta_queue_add: (0:254):2001:db8:cafe:2::/64: queued rn 0x56267593de90 into sub-queue RIP/OSPF/ISIS/EIGRP/NHRP Routes
Aug 02 16:51:56 ubuntu zebra[386985]: [NZNZ4-7P54Y] default(0:254):2001:db8:cafe:2::/64: Processing rn 0x56267593de90
Aug 02 16:51:56 ubuntu zebra[386985]: [ZJVZ4-XEGPF] default(0:254):2001:db8:cafe:2::/64: Examine re 0x56267595abf0 (ospf6) status: Removed Changed flags: None dist 110 metric 10
Aug 02 16:51:56 ubuntu zebra[386985]: [NM15X-X83N9] rib_process: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, removing re 0x56267595abf0
Aug 02 16:51:56 ubuntu zebra[386985]: [Y53JX-CBC5H] rib_unlink: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, re 0x56267595abf0
Aug 02 16:51:56 ubuntu zebra[386985]: [KT8QQ-45WQ0] rib_gc_dest: (0:?):2001:db8:cafe:2::/64: removing dest from table
Aug 02 16:51:56 ubuntu zebra[386985]: [HH6N2-PDCJS] default(0:0):2001:db8:cafe:2::/64 rn 0x56267593de90 dequeued from sub-queue Connected Routes
3. ...and then assert:
(gdb) bt
#0 __pthread_kill_implementation (no_tid=0, signo=6, threadid=140662163115136) at ./nptl/pthread_kill.c:44
#1 __pthread_kill_internal (signo=6, threadid=140662163115136) at ./nptl/pthread_kill.c:78
#2 __GI___pthread_kill (threadid=140662163115136, signo=signo@entry=6) at ./nptl/pthread_kill.c:89
#3 0x00007fee76753476 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
#4 0x00007fee767397f3 in __GI_abort () at ./stdlib/abort.c:79
#5 0x00007fee76a420fd in _zlog_assert_failed () from target:/usr/lib/x86_64-linux-gnu/frr/libfrr.so.0
#6 0x0000562674efe0f0 in process_subq_route (qindex=7 '\a', lnode=0x562675940c60) at zebra/zebra_rib.c:2540
#7 process_subq (qindex=META_QUEUE_NOTBGP, subq=0x562675574580) at zebra/zebra_rib.c:3055
#8 meta_queue_process (dummy=<optimized out>, data=0x56267556d430) at zebra/zebra_rib.c:3091
#9 0x00007fee76a386e8 in work_queue_run () from target:/usr/lib/x86_64-linux-gnu/frr/libfrr.so.0
#10 0x00007fee76a31c91 in thread_call () from target:/usr/lib/x86_64-linux-gnu/frr/libfrr.so.0
#11 0x00007fee769ee528 in frr_run () from target:/usr/lib/x86_64-linux-gnu/frr/libfrr.so.0
#12 0x0000562674e97ec5 in main (argc=5, argv=0x7ffd1e275958) at zebra/main.c:478
(gdb) print lnode->data
$10 = (void *) 0x56267593de90
(gdb) p/x *(struct route_node *)0x56267593de90
$11 = {
p = {
family = 0xa,
prefixlen = 0x40,
u = {
prefix = 0x20,
prefix4 = {
s_addr = 0xb80d0120
},
prefix6 = {
__in6_u = {
__u6_addr8 = {0x20, 0x1, 0xd, 0xb8, 0xca, 0xfe, 0x0, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
__u6_addr16 = {0x120, 0xb80d, 0xfeca, 0x200, 0x0, 0x0, 0x0, 0x0},
__u6_addr32 = {0xb80d0120, 0x200feca, 0x0, 0x0}
}
},
...
table = 0x5626755ae010,
parent = 0x5626755ae070,
link = {0x0, 0x0},
lock = 0x4,
nodehash = {
hi = {
next = 0x5626755ae0d0,
hashval = 0xebe8bdbf
}
},
info = 0x0
3. What's happen:
We removed unneeded re 0x56267595ae40 while adding re 0x56267595abf0. It was the last connected re,
but rn 0x56267593de90 is still in the connected sub-queue.
Then rib_delnode was called for 0x56267595abf0. (rn 0x56267593de90 is still in the connected sub-queue).
rib_delnode have called rib_meta_queue_add which have checked, that rn is absent in sub-queue RIP/OSPF/ISIS/EIGRP/NHRP
and have added rn in the second sub-queue.
Fixes: d7ac4c4d88 ("zebra: Introduce early route processing on the MetaQ")
Signed-off-by: Pavel Ivashchenko <pivashchenko@nfware.com>
Before now, PBRD used non-zero values to imply that a rule's
match or action field was active. This approach was getting
cumbersome for fields where 0 is a valid active value and
various field-specific magic values had to be used.
This commit changes PBRD to use a flag bit per field to
indicate that the field is active.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
DSCP and ECN matching are configured independently. Maintain
these values in independent fields in pbrd, zapi, and zebra.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
After Zebra knows it's capability surrounding v6 with v4 nexthops
have it send this ability up to interested parties.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When zebra send msg to fpm client, it doesn't handle duplicated nexthops especially, which means if zebra has a route with NUM1 recursive nexthops, each resolved to the same NUM2 connected nexthops, it will send to fpm client a route with NUM1*NUM2 nexthops. But actually there are only NUM2 useful nexthops, the left NUM1*NUM2-NUM2 nexthops are all duplicated nexthops. By the way, zebra has duplicated nexthop remove logic when sending msg to kernel.
Add duplicated nexthop remove logic to zebra when sending msg to fpm client.
Signed-off-by: 恭简 <gongjian.lhr@alibaba-inc.com>
When frr.service is going down(restart or stop),
zebra core can be seen.
Sequence of events leading to crash:
Increments of nhe refcnt:
- Upper level creates a new nhe(say NHE1) —> nhe->refcnt=1
- Two RE’s (Say RE1 & RE2) associate with NHE1 —> nhe->refcnt = 3
Decrements of nhe refcnt:
- BGP sends a zapi msg to zebra to delete NHG. —> nhe->refcnt = 2
- RE1 is queued for delete in META-Q
- As zebra is dissociating with its clients, zebra_nhg_score_proto() is
invoked -> nhe->refcnt=1
- RE2 is no more associated with the NHE1 —>nhe->refcnt=0 &
hence NHE IS FREED
- Now RE1 is dequeued from META-Q for processing the re delete. —> At
this point re->nhe is pointing to freed pointer. CRASH CRASH!!!!
Fix:
- When we iterate zebra_nhg_score_proto_entry() to delete the upper
proto specific nhe’s, we need to skip the additional nhe->refcnt
decrement in case nhe->flags has NEXTHOP_GROUP_PROTO_RELEASED set.
Backtrace-1
0x00007fa8449ce8eb in raise () from /lib/x86_64-linux-gnu/libc.so.6
0x00007fa8449b9535 in abort () from /lib/x86_64-linux-gnu/libc.so.6
0x00007fa844d32f86 in _zlog_assert_failed (xref=xref@entry=0x55fa37871040 <_xref.28142>, extra=extra@entry=0x0) at lib/zlog.c:680
0x000055fa3778f770 in rib_re_nhg_free (re=0x55fa39e33770) at zebra/zebra_rib.c:2578
rib_unlink (rn=0x55fa39e27a60, re=0x55fa39e33770) at zebra/zebra_rib.c:3930
0x000055fa3778ff18 in rib_process (rn=0x55fa39e27a60) at zebra/zebra_rib.c:1439
0x000055fa37790b1c in process_subq_route (qindex=8 '\b', lnode=0x55fa39e1c1b0) at zebra/zebra_rib.c:2549
process_subq (qindex=META_QUEUE_BGP, subq=0x55fa3999c580) at zebra/zebra_rib.c:3107
meta_queue_process (dummy=<optimized out>, data=0x55fa3999c480) at zebra/zebra_rib.c:3146
0x00007fa844d232b8 in work_queue_run (thread=0x7ffffbdf6cb0) at lib/workqueue.c:285
0x00007fa844d195fd in thread_call (thread=thread@entry=0x7ffffbdf6cb0) at lib/thread.c:2008
0x00007fa844cd3888 in frr_run (master=0x55fa397b7630) at lib/libfrr.c:1223
0x000055fa3771e294 in main (argc=12, argv=0x7ffffbdf7098) at zebra/main.c:526
Backtrace-2
0x00007f125af3f535 in abort () from /lib/x86_64-linux-gnu/libc.so.6
0x00007f125b2b8f96 in _zlog_assert_failed (xref=xref@entry=0x7f125b344260 <_xref.18768>, extra=extra@entry=0x0) at lib/zlog.c:680
0x00007f125b268190 in nexthop_copy_no_recurse (copy=copy@entry=0x5606dd726f10, nexthop=nexthop@entry=0x7f125b0d7f90, rparent=<optimized out>) at lib/nexthop.c:806
0x00007f125b2681b2 in nexthop_copy (copy=0x5606dd726f10, nexthop=0x7f125b0d7f90, rparent=<optimized out>) at lib/nexthop.c:836
0x00007f125b268249 in nexthop_dup (nexthop=nexthop@entry=0x7f125b0d7f90, rparent=rparent@entry=0x0) at lib/nexthop.c:860
0x00007f125b26b67b in copy_nexthops (tnh=tnh@entry=0x5606dd9ec748, nh=<optimized out>, rparent=rparent@entry=0x0) at lib/nexthop_group.c:457
0x00007f125b26b6ba in nexthop_group_copy (to=to@entry=0x5606dd9ec748, from=from@entry=0x5606dd9ee9f8) at lib/nexthop_group.c:291
0x00005606db6ec678 in zebra_nhe_copy (orig=0x5606dd9ee9d0, id=id@entry=0) at zebra/zebra_nhg.c:431
0x00005606db6ddc63 in mpls_ftn_uninstall_all (zvrf=zvrf@entry=0x5606dd6e7cd0, afi=afi@entry=2, lsp_type=ZEBRA_LSP_NONE) at zebra/zebra_mpls.c:3410
0x00005606db6de108 in zebra_mpls_cleanup_zclient_labels (client=0x5606dd8e03b0) at ./zebra/zebra_mpls.h:471
0x00005606db73e575 in hook_call_zserv_client_close (client=0x5606dd8e03b0) at zebra/zserv.c:566
zserv_client_free (client=0x5606dd8e03b0) at zebra/zserv.c:585
zserv_close_client (client=0x5606dd8e03b0) at zebra/zserv.c:706
0x00007f125b29f60d in thread_call (thread=thread@entry=0x7ffc2a740290) at lib/thread.c:2008
0x00007f125b259888 in frr_run (master=0x5606dd3b7630) at lib/libfrr.c:1223
0x00005606db68d298 in main (argc=12, argv=0x7ffc2a740678) at zebra/main.c:534
Issue: 3492031
Ticket# 3492031
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Include an event ptr-to-ptr in the event_execute() api
call, like the various schedule api calls. This allows the
execute() api to cancel an existing scheduled task if that
task is being executed inline.
Signed-off-by: Mark Stapp <mjs@labn.net>
Two changes for debug:
1. Add a field to indicate its vrf for nexthop. When the interface changes
vrf, we can't easily know the vrf of this nexthop according to current log.
2. Add a field to indicate operation type. We can't know whether to add or
remove route according to current log.
Before:
```
zebra_nhg_increment_ref: nhe 0x555623eb82c0 (76[if 6]) 0 => 1
zebra_interface_nhg_reinstall install nhe 75[77.75.1.75 if 6] nh type 3 flags 0x1
Route 77.75.1.0/24(8) queued for processing into sub-queue Early Route Processing
Route 77.75.1.0/24(8) queued for processing into sub-queue Early Route Processing
```
After:
```
zebra_nhg_increment_ref: nhe 0x555623eb82c0 (76[if 6 vrfid 9]) 0 => 1
zebra_interface_nhg_reinstall install nhe 75[77.75.1.75 if 6 vrfid 8] nh type 3 flags 0x1
Route 77.75.1.0/24(8) (add) queued for processing into sub-queue Early Route Processing
Route 77.75.1.0/24(8) (delete) queued for processing into sub-queue Early Route Processing
```
Signed-off-by: anlan_cs <anlan_cs@tom.com>
PR#13413 introduces reinstall mechanism, but there is problem with the route
leak scenario.
With route leak configuration: ( `x1` and `x2` are binded to `vrf1` )
```
vrf vrf2
ip route 75.75.75.75/32 77.75.1.75 nexthop-vrf vrf1
ip route 75.75.75.75/32 77.75.2.75 nexthop-vrf vrf1
exit-vrf
```
Firstly, all are ok. But after `x1` is set down and up ( The interval
between the down and up operations should be less than 180 seconds. ) ,
`x1` is lost from the nexthop group:
```
anlan# ip nexthop
id 121 group 122/123 proto zebra
id 122 via 77.75.1.75 dev x1 scope link proto zebra
id 123 via 77.75.2.75 dev x2 scope link proto zebra
anlan# ip route show table 2
75.75.75.75 nhid 121 proto 196 metric 20
nexthop via 77.75.1.75 dev x1 weight 1
nexthop via 77.75.2.75 dev x2 weight 1
anlan# ip link set dev x1 down
anlan# ip link set dev x1 up
anlan# ip route show table 2 <- Wrong, one nexthop lost from group
75.75.75.75 nhid 121 via 77.75.2.75 dev x2 proto 196 metric 20
anlan# ip nexthop
id 121 group 123 proto zebra
id 122 via 77.75.1.75 dev x1 scope link proto zebra
id 123 via 77.75.2.75 dev x2 scope link proto zebra
anlan# show ip route vrf vrf2 <- Still ok
VRF vrf2:
S>* 75.75.75.75/32 [1/0] via 77.75.1.75, x1 (vrf vrf1), weight 1, 00:00:05
* via 77.75.2.75, x2 (vrf vrf1), weight 1, 00:00:05
```
From the impact on kernel:
The `nh->type` of `id 122` is *always* `NEXTHOP_TYPE_IPV4` in the route leak
case. Then, `nexthop_is_ifindex_type()` introduced by commit `5bb877` always
returns `false`, so its dependents can't be reinstalled. After `x1` is down,
there is only `id 123` in the group of `id 121`. So, Finally `id 121` remains
unchanged after `x1` is up, i.e., `id 122` is not added to the group even it is
reinstalled itself.
From the impact on zebra:
The `show ip route vrf vrf2` is still ok because the `id`s are reused/reinstalled
successfully within 180 seconds after `x1` is down and up. The group of `id 121`
is with old `NEXTHOP_GROUP_INSTALLED` flag, and it is still the group of `id 122`
and `id 123` as before.
In this way, kernel and zebra have become out of sync.
The `nh->type` of `id 122` should be adjusted to `NEXTHOP_TYPE_IPV4_IFINDEX`
after nexthop resolved. This commit is for doing this to make that reinstall
mechanism work.
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Currently, json output of evpn route command are no pretty format.
This is an extremely expensive operation at high VNI scale
EVPN json non-pretty command support added:
```
show evpn mac vni <vni-id> detail json
show evpn vni detail json
```
Ticket:#3513256
Issue:3513256
Testing: UT done
Signed-off-by: Sindhu Parvathi Gopinathan's <sgopinathan@nvidia.com>
Currently, json output of show ip route command are no pretty format.
This is an extremely expensive operation at high scale
(with high number of routes with many paths).
Zebra json non-pretty command support added:
```
show ip route json
```
Ticket:#3513256
Issue:3513256
Testing: UT done
Signed-off-by: Sindhu Parvathi Gopinathan's <sgopinathan@nvidia.com>
bgpd, pbrd: use common pbr encoder
zebra: use common pbr decoder
tests: pbr_topo1: check more filter fields
Purpose:
1. Reduce likelihood of zapi format mismatches when adding
PBR fields due to multiple parallel encoder implementations
2. Encourage common PBR structure usage among various daemons
3. Reduce coding errors via explicit per-field enable flags
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Subset: zebra dataplane
Add new vlan filter fields. No kernel dataplane
implementation yet (linux does not support).
Changes by:
Josh Werner <joshuawerner@mitre.org>
Eli Baum <ebaum@mitre.org>
G. Paul Ziemba <paulz@labn.net>
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Subset: ZAPI changes to send the new data
Also adds filter_bm field; currently for PBR_FILTER_PCP, but in the
future to be used for all of the filter fields.
Changes by:
Josh Werner <joshuawerner@mitre.org>
Eli Baum <ebaum@mitre.org>
G. Paul Ziemba <paulz@labn.net>
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
When the MAC address of the neighbor changes, a possible crash issue may occur.
In the zebra_evpn_local_neigh_update function, the value of old_zmac (n->mac) will be updated to the new MAC address when the neighbor's MAC address changes.
The pointer to the memory that this pointer points to may be released in the zebra_evpn_local_neigh_deref_mac function. This will cause old_zmac to become a dangling pointer. Accessing this dangling pointer in the zebra_evpn_ip_inherit_dad_from_mac function below will cause the zebra process to crash.
Here is the backtrace:
(gdb) bt
0 0x00007fc12c5f1fbf in raise () from /lib/x86_64-linux-gnu/libpthread.so.0
1 0x00007fc12d52e19c in core_handler (signo=11, siginfo=0x7ffda1fd1570, context=<optimized out>) at lib/sigevent.c:262
2 <signal handler called>
3 zebra_evpn_ip_inherit_dad_from_mac (zvrf=<optimized out>, old_zmac=0x5579ac3ca520, new_zmac=0x5579aba82f80, nbr=0x5579abd65ec0) at zebra/ze
4 0x00005579aa8dbf6d in zebra_evpn_local_neigh_update (zevpn=0x5579abb81440, ifp=ifp@entry=0x5579ab8a1640, ip=ip@entry=0x7ffda1fd1b40, macadd
local_inactive=local_inactive@entry=253, dp_static=false) at zebra/zebra_evpn_neigh.c:1729
5 0x00005579aa9190a9 in zebra_vxlan_handle_kernel_neigh_update (ifp=ifp@entry=0x5579ab8a1640, link_if=link_if@entry=0x5579abd14f90, ip=ip@ent
is_ext=is_ext@entry=false, is_router=<optimized out>, local_inactive=false, dp_static=false) at zebra/zebra_vxlan.c:3791
6 0x00005579aa8b3048 in netlink_ipneigh_change (h=0x7ffda1fd1d50, len=<optimized out>, ns_id=<optimized out>) at zebra/rt_netlink.c:3649
7 0x00005579aa8ac667 in netlink_parse_info (filter=filter@entry=0x5579aa8ab630 <netlink_information_fetch>, nl=nl@entry=0x5579ab5861e8, zns=z
startup=startup@entry=0) at zebra/kernel_netlink.c:965
8 0x00005579aa8ac8c8 in kernel_read (thread=<optimized out>) at zebra/kernel_netlink.c:402
9 0x00007fc12d53e60b in thread_call (thread=thread@entry=0x7ffda1fd9fd0) at lib/thread.c:1834
10 0x00007fc12d4fba78 in frr_run (master=0x5579ab3a1740) at lib/libfrr.c:1155
11 0x00005579aa89c6e3 in main (argc=11, argv=0x7ffda1fda3c8) at zebra/main.c:485
(gdb) f 3
3 zebra_evpn_ip_inherit_dad_from_mac (zvrf=<optimized out>, old_zmac=0x5579ac3ca520, new_zmac=0x5579aba82f80, nbr=0x5579abd65ec0) at zebra/ze
1230 zebra/zebra_evpn_neigh.c: No such file or directory.
(gdb) p *old_zmac
Cannot access memory at address 0x5579ac3ca520
(gdb)
To fix this issue, the ZEBRA_MAC_DUPLICATE flag should be retrieved before old_zmac is released and used in the zebra_evpn_ip_inherit_dad_from_mac function.
Signed-off-by: Jack.zhang <hanyu.zly@alibaba-inc.com>
When route_next return node, it has lock the node. if return or break loop, should unlock node.
Signed-off-by: guozhongfeng <guozhongfeng.gzf@alibaba-inc.com>
When an upper level protocol is installing a route X that needs to be
route replaced and at the same time the same or another protocol installs a
different route that depends on route X for nexthop resolution can leave
us with a state where the route is not accepted because zebra is still
really early in the route replace semantics ( route X is still on the work
Queue to be processed ) then the dependent route would not be installed.
This came up in the bgp_default_originate test cases frequently.
Further extendd the ROUTE_ENTR_ROUTE_REPLACING flag to cover this case
as well. This has come up because the early route processing queueing
that was implemented late last year.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently the vrf change procedure for the deleted interface is after
its deletion, it causes problem for upper daemons.
Here is the problem of `bgp`:
After deletion of one **irrelevant** interface in the same vrf, its
`ifindex` is set to 0. And then, the vrf change procedure will send
"ZEBRA_INTERFACE_DOWN" to `bgpd`.
Normally, `bgp_nht_ifp_table_handle()` should igore this message for
no correlation. However, it wrongly matched `ifindex` of 0, and removed
the related routes for the down `bnc`.
Adjust the location of the vrf change procedure to fix this issue.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
When unconfiguring 'no import <table>', a static route imported
from a routing table number is never deleted.
When importing a route from a given table, a default distance of
15 is applied. At the time of deletion, when trying to compare
the original route with the new one, the distance does not match,
because the static route applies a default distance of 1.
If the imported route has the distance set, unset the distance
flag to avoid comparing it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The default vrf is generally non-NULL, except when shutdown. So, most
of the time it is not necessary to check if it is NULL, we should
remove the useless checks for it.
Searched them with exact match:
```
grep -rI "zebra_vrf_lookup_by_id(VRF_DEFAULT)" | wc -l
31
```
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Adjust one debug info, separate the ip address from it. Just like it is processed
in `redistribute_update()`.
Before:
```
34:1375.75.75.75/32: Redist del: re 0x55c1112067e0 (0:static), new re 0x55c1112de7c0 (0:static)
```
After:
```
(34:13):75.75.75.75/32: Redist del: re 0x55c1112067e0 (0:static), new re 0x55c1112de7c0 (0:static)
```
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Treat NHRP-installed routes as valid, as if they were
CONNECTED routes, when checking candidate routes'
nexthops for validity. This allows use of NHRP by an
IGP, for example, that doesn't normally want recursive
nexthop resolution.
Signed-off-by: Mark Stapp <mjs@labn.net>
Code is looking up the nlsock to generate the batch messages
and then looking it up again to get the response. Let's
just look it up one time.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The mpls configuration does not work when an interface is
created after having applied the frr configuration. The
below scenario illustrates:
> root@dut:~# modprobe mpls
> root@dut:~# zebra &
> [..]
> dut(config)# interface ifacenotcreated
> dut(config-if)# mpls enable
> dut(config-if)# Ctrl-D
> root@dut:~# ip li show ifacenotcreated
> Device "ifacenotcreated" does not exist.
> root@dut:~# ip li add ifacenotcreated type dummy
> 0
Fix this by forcing the mpls flag when the interface is detected.
> root@dut:~# cat /proc/sys/net/mpls/conf/ifacenotcreat/input
> 1
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When `dplane_fpm_nl` receives a route, it allocates memory for a dplane
context and calls `netlink_route_change_read_unicast_internal` without
initializing the `intf_extra_list` contained in the dplane context. If
`netlink_route_change_read_unicast_internal` is not able to process the
route, we call `dplane_ctx_fini` to free the dplane context. This causes
a crash because `dplane_ctx_fini` attempts to access the intf_extra_list
which is not initialized.
To solve this issue, we can call `dplane_ctx_route_init`to initialize
the dplane route context properly, just after the dplane context
allocation.
(gdb) bt
#0 0x0000555dd5ceae80 in dplane_intf_extra_list_pop (h=0x7fae1c007e68) at ../zebra/zebra_dplane.c:427
#1 dplane_ctx_free_internal (ctx=0x7fae1c0074b0) at ../zebra/zebra_dplane.c:724
#2 0x0000555dd5cebc99 in dplane_ctx_free (pctx=0x7fae2aa88c98) at ../zebra/zebra_dplane.c:869
#3 dplane_ctx_free (pctx=0x7fae2aa88c98, pctx@entry=0x7fae2aa78c28) at ../zebra/zebra_dplane.c:855
#4 dplane_ctx_fini (pctx=pctx@entry=0x7fae2aa88c98) at ../zebra/zebra_dplane.c:890
#5 0x00007fae31e93f29 in fpm_read (t=) at ../zebra/dplane_fpm_nl.c:605
#6 0x00007fae325191dd in thread_call (thread=thread@entry=0x7fae2aa98da0) at ../lib/thread.c:2006
#7 0x00007fae324c42b8 in fpt_run (arg=0x555dd74777c0) at ../lib/frr_pthread.c:309
#8 0x00007fae32405ea7 in start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0
#9 0x00007fae32325a2f in clone () from /lib/x86_64-linux-gnu/libc.so.6
Fixes: #13754
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
The function `dplane_ctx_route_init` initializes a dplane route context
from the route object passed as an argument. Let's abstract this
function to allow initializing the dplane route context without actually
copying a route object.
This allows us to use this function for initializing a dplane route
context when we don't have any route to copy in it.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
a) Move the reads of link and address information
into the dplane
b) Move the startup read of data into the dplane
as well.
c) Break up startup reading of the linux kernel data
into multiple phases. As that we have implied ordering
of data that must be read first and if the dplane has
taken over some data reading then we must delay initial
read-in of other data.
Fixes: #13288
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1) Add a bunch of get/set functions and associated data
structure in zebra_dplane to allow the setting and retrieval
of interface netlink data up into the master pthread.
2) Add a bit of code to breakup startup into stages. This is
because FRR currently has a mix of dplane and non dplane interactions
and the code needs to be paused before continuing on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Turns out FRR has 2 functions one specifically for startup
and one for normal day to day operations. There were only
a couple of minor differences from what I could tell, and
where they were different the after startup functionality should
have been updated too. I cannot figure out why we have 2.
Non-startup handling of bonds appears to be incorrect
so let's fix that. Additionally the speed was not
properly being set in non-startup situations.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Since we are moving some code handling out of the dataplane
and into zebra proper, lets move the protodown r bit as well.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Rename the vrf_lookup_by_id function to zebra_vrf_lookup_by_id
and move to zebra_vrf.c where it nominally belongs, as that
we need zebra specific data to find this vrf_id and as such
it does not belong in vrf.c
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When changing one interface's vrf, the kernel routes are wrongly kept
in old vrf. Finally, the forwarding table in that old vrf can't forward
traffic correctly for those residual entries.
Follow these steps to make this problem happen:
( Firstly, "x1" interface of default vrf is with address of "6.6.6.6/24". )
```
anlan# ip route add 4.4.4.0/24 via 6.6.6.8 dev x1
anlan# ip link add vrf1 type vrf table 1
anlan# ip link set vrf1 up
anlan# ip link set x1 master vrf1
```
Then check `show ip route`, the route of "4.4.4.0/24" is still selected
in default vrf.
If the interface goes down, the kernel routes will be reevaluated. Those
kernel routes with active interface of nexthop can be kept no change, it
is a fast path. Otherwise, it enters into slow path to do careful examination
on this nexthop.
After the interface's vrf had been changed into new vrf, the down message of
this interface came. It means the interface is not in old vrf although it
still exists during that checking, so the kernel routes should be dropped
after this nexthop matching against a default route in slow path. But, in
current code they are wrongly kept in fast path for not checking vrf.
So, modified the checking active nexthop with vrf comparision for the interface
during reevaluation.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
There are relaxed nexthop requirements for kernel routes because we
trust kernel routes.
Two minor changes for kernel routes:
1. `if_is_up()` is one of the necessary conditions for `if_is_operative()`.
Here, we can remove this unnecessary check for clarity.
2. Since `nexthop_active()` doesn't distinguish whether it is kernel route,
modified the corresponding comment in it.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
When using asic_offload with an asynchronous notification the
rib_route_match_ctx function is testing for distance and tag
being correct against the re.
Normal route notification for static routes is this(well really all routes):
a) zebra dplane generates a ctx to send to the dplane for route install
b) dplane installs it in the kernel
c) if the dplane_fpm_nl.c module is being used it installs it.
d) The context's success code is set to it worked and passes the context
back up to zebra for processing.
e) Zebra master receives this and checks the distance and tag are correct
for static routes and accepts the route and marks it installed.
If the operator is using a wait for install mechansim where the dplane
is asynchronously sending the result back up at a future time *and*
it is using the dplane_fpm_nl.c code where it uses the rt_netlink.c
route parsing code, then there is no way to set distance as that we
do not pass distance to the kernel.
As such static routes were never being properly handled since the re and
context would not match and the route would still be marked as queued.
Modify the code such that the asynchronous path notification for static
routes ignores the distance and tag's as that there is no way to test
for this data from that path at this point in time.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
EVPN RMAC (Router MAC) nexthop list compare
function needs to return all values so
the list element can be compared and added/deleted
properly.
Ticket:#3486989
Testing Done:
Originate EVPN Type-5 route with PIP IP and MAC as remote
nexthops.
Change the PIP IP address which triggers nexthop change.
Before fix:
When PIP IP changes RMAC is deleted from remote VTEPs.
TORS1# show evpn next-hops vni 4001 | include 00:02:00:00:00:2d
27.0.0.11 00:02:00:00:00:2d
TORS1# show evpn rmac vni 4001 | include 00:02:00:00:00:2d
00:02:00:00:00:2d 27.0.0.11
----- Remote VTEP change nexthop IP to 172.16.16.16 -----
TORS1# show evpn next-hops vni 4001 | include 00:02:00:00:00:2d
172.16.16.16 00:02:00:00:00:2d
TORS1# show evpn rmac vni 4001 | include 00:02:00:00:00:2d
TORS1#
After fix:
RMAC is retained as its nexthop list is not empty,
thus it is not deleted from remote VTEPs.
TORS1# show evpn rmac vni 4001 | include 00:02:00:00:00:2d
00:02:00:00:00:2d 172.16.16.16
Log:
2023/06/27 00:50:36.833474 ZEBRA: [XREH0-ZYMH6] L3VNI 4001 Remote VTEP
change(27.0.0.11 -> 172.16.16.16) for RMAC 00:02:00:00:00:2d
Signed-off-by: Chirag Shah <chirag@nvidia.com>
When running all daemons with config for most of them, FRR has
sharpd@janelle:~/frr$ vtysh -c "show debug hashtable" | grep "VRF BIT HASH" | wc -l
3570
3570 hashes for bitmaps associated with the vrf. This is a very
large number of hashes. Let's do two things:
a) Reduce the created size of the actually created hashes to 2
instead of 32.
b) Delay generation of the hash *until* a set operation happens.
As that no hash directly implies a unset value if/when checked.
This reduces the number of hashes to 61 in my setup for normal
operation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Allow zapi clients to register to be notified when a server
for an opaque message type is present. Zebra maintains these
notification registrations in the same data structures that it
uses for opaque message handling.
Signed-off-by: Mark Stapp <mjs@labn.net>
Include the sending zapi client info (proto, instance, and
session id) in each opaque zapi message. Add opaque 'init'
apis for clients who want to encode their opaque data inline,
into the zclient's internal stream buffer. Use these init apis
in the TE/link-state lib code, instead of hand-coding the
zapi opaque header info.
Signed-off-by: Mark Stapp <mjs@labn.net>
In pbrd, don't encode a rule without a table. There are cases
where the zapi encoding was incorrect because the 4-octet
table id was missing. In zebra, mask off the ECN bits in the
TOS byte when encoding an iprule to match netlink's
expectation.
Signed-off-by: Mark Stapp <mjs@labn.net>
When shutting down the main pthread was first closing
the sockets associated with the dplane pthread and
then telling it to shutdown the pthread at a later point
in time. This caused the dplane to crash because the nl
data has been freed already. Change the shutdown order
to stop the dplane pthread *and* then close the sockets.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The msg value is always reset to something new before it is used inside
the mutex. No need to set it to NULL.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When using a context to send route notifications to upper
level protocols, the code was using a locking function to
get the route node. There is no need for this to be locked
as such FRR should free it up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
On removal, ensure that the ifp->node is set to a null
pointer so that FRR does not use data after freed.
In addition ensure that the ifp->node exists before
attempting to free it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There is no path in some functions where the ctx
has not already been de-refed. As such no need
to test for it's existence.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When shutting down zebra, the hook for the rmac update was
not being unregistered. As such it would be possible
to get into a condition where more rmacs are being
added to the queue for handling in the future after we
are told to shutdown.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The t_conn_down pointer was being set to NULL when it already
was. The t_conn_down pointer was being dropped( and leaving
a thread possibly running in the background ) which could
cause problems on shutdown. And finally when shutting down
the t_conn_down event was not being stopped at all.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
On shutdown, the old FPM queues up dests to be sent to
the FPM listener. This is done through the rib_shutdown
hook. Which is called when the table that the routes are
stored in are being deleted. This dest has pointers
to the rnode. The rnode has pointers to the table it
is associated with as well as the table->info pointer for
the zebra data associated with this table.
The FPM after this attempts to tell this to it's listener
via events. Unfortunately the zvrf, table_id and nl_pid
was being grabbed from memory that had been freed! Since
all this can be grabbed from memory that has not been freed
on shutdown let's switch over to using that instead of freed
memory for gathering data.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When FRR is built with the option `--disable-bfdd`, the build process
fails with the following error:
```
zebra/zebra_ptm.c: In function ‘zebra_ptm_init’:
zebra/zebra_ptm.c:119:35: error: ‘FRR_PTM_NAME’ undeclared (first use in this function)
119 | snprintf(buf, sizeof(buf), "%s", FRR_PTM_NAME);
| ^~~~~~~~~~~~
zebra/zebra_ptm.c:119:35: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [Makefile:10520: zebra/zebra_ptm.o] Error 1
```
The reason is that `FRR_PTM_NAME` is defined in `version.h` which is not
imported.
This commit adds the missing import.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
The prov->dp_out_queued counter was never being decremented
when a ctx was pulled off of the list. Let's change it to
accurately reflect real life.
Broken:
janelle.pinkbelly.org# show zebra dplane providers detailed
Zebra dataplane providers:
Kernel (1): in: 330872, q: 0, q_max: 100, out: 330872, q: 330872, q_max: 330872
janelle.pinkbelly.org#
Fixed:
sharpd@janelle:/tmp/topotests$ vtysh -c "show zebra dplane providers detailed"
Zebra dataplane providers:
Kernel (1): in: 221495, q: 0, q_max: 100, out: 221495, q: 0, q_max: 100
sharpd@janelle:/tmp/topotests$
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The 'show mpls table json' command displays the outgoing interface
name only when the nexthop type is either NEXTHOP_TYPE_IFINDEX or
NEXTHOP_TYPE_IPV6_IFINDEX. add the interface name for the nexthop
type NEXTHOP_TYPE_IPV4_IFINDEX.
Fixes: ("b78b820d46d6") MPLS: Display enhancements and JSON support
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This commit addresses the case where a service wants to install
an LSP entry to a next-hop located in a VRF instance. The incoming
MPLS packet is on the namespace and has to be directed to a nexthop
located behind an interface that sits in a specific VRF instance.
The below iproute command can illustrate:
> ip link add vrf1 type vrf table 10
> ip link set dev vrf1 up
> ip link set dev eth0 master vrf1
> ip a a 192.0.2.1/24 dev eth0
> ip -f mpls route add 105 via inet 192.0.2.45 dev eth0
If a service uses the ZEBRA_MPLS_LABELS messages, then the LSP
message is ignored: from zebra perspective, the MPLS entries are
visible via the 'show mpls table' command, but no LSP entry is
installed in the kernel.
The issue is in the nhlfe_nexthop_active_ipv[4/6] function: the
outgoing interface mentioned in the nexthop is searched in the
main VRF, whereas the interface is in a separate VRF. The interface
is not found, and the nhlfe to install is considered not active.
To address this issue, reuse the incoming vrf_id parameter transmitted
in the nexthop structure from the ZEBRA_MPLS_LABELS message. When
creating an NHLFE entry, the vrf_id is used instead of the DEFAULT_VRF.
And the nhlfe entry can be considered as active.
One alternate solution to reuse the vrf_id parameter in the mpls network
context would be to modify the search function in nhlfe_nexthop_active..()
function: looking for an existing ifindex in the zns. However, this
solution may not fit later when netns backend would be used.
Note that some changes have not been done yet and are considered
sufficient for now:
- The 'nhlfe_find' API: the assumption is done that only the linux vrf
backend is used for now.
- The 'mpls_lsp_install()' API: It is currently used by the CLI command
which does not handle the interface parameter, and the SRTE service, whih
always sends LSPs towards a nexthop located in the VRF_DEFAULT.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The ZEBRA_MPLS_LABELS_[ADD/DELETE/REPLACE] messages may change an
LSP entry based on an incoming MPLS entry, followed by a given
next-hop.
Having a next hop with no label information inside is rejected
by the zebra layer. As illustration, the following ZAPI message
would be rejected, because the next hop does not contain any
label information.
> ip -f mpls route add 105 via inet 192.0.2.45
At the same time, such configuration is desirable to be
supported:
An attempt has been done to configure the next-hop with an implicit-
null label. But the message is rejected by the kernel:
> ip -f mpls route add 104 as 3 via inet 192.0.2.45
> Error: Implicit NULL Label (3) can not be used in encapsulation.
The commit proposes to accept ZEBRA_MPLS_LABELS_[XX] messages with
a nexthop that does not contain any label information.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Having tests for memory allocation success makes no sense
given what happens when frr fails to allocate memory.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Upon interface up associated singleton NHG's
dependent NHGs needs to be reinstalled as
kernel would have deleted if there is no route
referencing it.
Ticket:#3416477
Issue:3416477
Testing Done:
flap interfaces which are part of route NHG,
upon interfaces up event, NHGs are resynced
into dplane.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Intermittently zebra and kernel are out of sync
when interface flaps and the add's/dels are in
same processing queue and zebra assumes no change in nexthop.
Hence we need to bring in a reinstall to kernel
of the nexthops and routes to sync their states.
Upon interface flap kernel would have deleted NHGs
associated to a interface (the one flapped),
zebra retains NHGs for 3 mins even though upper
layer protocol removes the nexthops (associated NHG).
As part of interface address add ,
re-add singleton NHGs associated to interface.
Ticket: #3173663
Issue: 3173663
Signed-off-by: Ashwini Reddy <ashred@nvidia.com>
Signed-off-by: Chirag Shah <chirag@nvidia.com>
There are two issues being addressed:
a) The ZEBRA_ON_RIB_PROCESS_HOOK_CALL script point
was creating a fs pointer per dplane ctx in
rib_process_dplane_results().
b) The fs pointer was not being deleted and directly
leaked.
For (a) Move the creation of the fs to outside
the do while loop.
For (b) At function end ensure that the pointer
is actually deleted.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. No any configuration in FRR, and `ip link add vrf1 type vrf ...`.
Currently, everything is ok.
2. `ip link del vrf1`.
`zebra` will wrongly/redundantly notify clients to add "vrf1" as a normal
interface after correct deletion of "vrf1".
```
ZEBRA: [KMXEB-K771Y] netlink_parse_info: netlink-listen (NS 0) type RTM_DELLINK(17), len=588, seq=0, pid=0
ZEBRA: [TDJW2-B9KJW] RTM_DELLINK for vrf1(93) <- Wrongly as normal interface, not vrf
ZEBRA: [WEEJX-M4HA0] interface vrf1 vrf vrf1(93) index 93 is now inactive.
ZEBRA: [NXAHW-290AC] MESSAGE: ZEBRA_INTERFACE_DELETE vrf1 vrf vrf1(93)
ZEBRA: [H97XA-ABB3A] MESSAGE: ZEBRA_INTERFACE_VRF_UPDATE/DEL vrf1 VRF Id 93 -> 0
ZEBRA: [HP8PZ-7D6D2] MESSAGE: ZEBRA_INTERFACE_VRF_UPDATE/ADD vrf1 VRF Id 93 -> 0 <-
ZEBRA: [Y6R2N-EF2N4] interface vrf1 is being deleted from the system
ZEBRA: [KNFMR-AFZ53] RTM_DELLINK for VRF vrf1(93)
ZEBRA: [P0CZ5-RF5FH] VRF vrf1 id 93 is now inactive
ZEBRA: [XC3P3-1DG4D] MESSAGE: ZEBRA_VRF_DELETE vrf1
ZEBRA: [ZMS2F-6K837] VRF vrf1 id 4294967295 deleted
OSPF: [JKWE3-97M3J] Zebra: interface add vrf1 vrf default[0] index 0 flags 480 metric 0 mtu 65575 speed 0 <- Wrongly add interface
```
`if_handle_vrf_change()` moved the interface from specific vrf to default
vrf. But it doesn't skip interface of vrf type. So, the wrong/redundant
add operation is done.
Note, the wrong add operation is regarded as an normal interface because
the `ifp->status` is cleared too early, so it is without VRF flag
( `ZEBRA_INTERFACE_VRF_LOOPBACK` ). Now, ospfd will initialize `ifp->type`
to `OSPF_IFTYPE_BROADCAST`.
3. `ip link add vrf1 type vrf ...`, add "vrf1" again. FRR will be with
wrong display:
```
interface vrf1
ip ospf network broadcast
exit
```
Here, zebra will send `ZEBRA_INTERFACE_ADD` again for "vrf1" with
correct `ifp->status`, so it will be updated into vrf type. But
it can't update `ifp->type` from `OSPF_IFTYPE_BROADCAST` to
`OSPF_IFTYPE_LOOPBACK` because it had been already configured in above
step 2.
Two changes to fix it:
1. Skip the procedure of switching VRF for interfaces of vrf type.
It means, don't send `ZEBRA_INTERFACE_ADD` to clients when deleting vrf.
2. Put the deletion of this flag at the last.
It means, clients should get correct `ifp->status`.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Remove the pointer check for ctx. At this point in the
function it has to be non null since we deref'ed it.
Additionally the alloc function that creates it cannot
fail.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The current local mac delete event send to flag with force
always which breaks the duplicate detected MACs where
it requires to be resynced from bgpd to earlier state.
Ticket:#3233019
Issue:3233019
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Upon receiving local mobility event for MAC + NEIGH,
both are detected as duplicate upon hitting DAD threshold.
Duplicated detected ( freezed) MAC + NEIGH are not known
to bgpd.
If locally learnt MAC + NEIGH are deleted in kernel,
the MAC is marked as AUTO after sending delete event
to bgpd.
Bgpd only reinstalls best route for MAC_IP route (NEIGH)
but not for MAC event.
This puts a situation where MAC is AUTO state and
associated neigh as remote.
Fix:
DUPLICATE + LOCAL MAC deletion, set MAC delete request
as reinstall from bgpd.
Ticket:#2873307
Reviewed By:
Testing Done:
Freeze MAC + two NEIGHs in local mobility event.
Delete MAC and NEIGH from kerenl.
bgp rsync remote mac route which puts MAC to remote state.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
When multiple interfaces have addresses in the same network, deleting
one of them may cause the wrong connected route being deleted.
For example:
ip link add veth1 type veth peer veth2
ip link set veth1 up
ip link set veth2 up
ip addr add dev veth1 192.168.0.1/24
ip addr add dev veth2 192.168.0.2/24
ip addr flush dev veth1
Zebra deletes the route of interface veth2 rather than veth1.
Should match nexthop against ere->re_nhe instead of ere->re->nhe.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
EVPN MH ES reduendant VTEPs need to install
sync MAC as notify inactive and generate
ND:Proxy stamped extended community on Type-2
route.
Ticket:#3436621
Issue:3436621
Testing Done:
tor-11 originates type-2 MAC route:
tor-11# bridge -d fdb show | grep 00:65:00:00:00:01
00:65:00:00:00:01 dev hostbond1 vlan 1000 notify master bridge static
tor-12 receives sync MAC route:
Before fix:
----------
tor-12:/# bridge -d fdb show | grep 00:65:00:00:00:01
00:65:00:00:00:01 dev hostbond1 vlan 1000 notify master bridge static
After fix: inactive is set to MAC entry
----------
tor-12:/#bridge -d fdb show | grep 00:65:00:00:00:01
00:65:00:00:00:01 dev hostbond1 vlan 1000 notify inactive master bridge
static
Notice the difference in `inactive` post notify on tor-12
with the fix.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Srv6 nexthop segments may not be set when configuring seg6local
attributes. This is the case for the following seg6local route:
Dump in vtysh, extract from 'show ipv6 route'
> B>* 2001:db8:1:1:1::/128 [20/0] is directly connected, vrf1, seg6local End.DT46 table 10, seg6 ::, weight 1, 00:02:10
Dump in iproute2, extract from 'ip -6 route show'
> 2001:db8:1:1:1:: nhid 22 encap seg6local action End.DT46 vrftable 10 dev vrf1 proto bgp metric 20 pref medium
As can be seen, the 'seg6 ::' nexthop segment is not visible on iproute2,
because it is not set. Do not display seg6 ipv6 nexthop when not set.
After:
> B>* 2001:db8:1:1:1::/128 [20/0] is directly connected, vrf1, seg6local End.DT46 table 10, weight 1, 00:02:10
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
