There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
* Added FSM for peer and global configuration for graceful restart
* Added debug option BGP_GRACEFUL_RESTART for logs specific to
graceful restart processing
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
This allows to set motd from an input instead of creating a file.
Example:
root@exit2-debian-9:~/frr# telnet 127.0.0.1 2605
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
Hello, this is bgpd
User Access Verification
Password:
exit2-debian-9> enable
exit2-debian-9# sh run
Current configuration:
!
frr version 7.3-dev-MyOwnFRRVersion
frr defaults traditional
!
hostname exit2-debian-9
password belekas
log file /var/log/frr/labas.log
log syslog informational
banner motd line Hello, this is bgpd
!
!
!
line vty
!
end
exit2-debian-9#
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This implements BMP. There's no fine-grained history here, the non-BMP
preparations are already split out from here so all that remains is BMP
proper.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add vrrpd and sharpd to the DAEMONS_* list so they
can be dispatched daemons independent commands
such as `show work-queues` and `log-filter`.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add vtysh commands to add/del/clear/show filters across
all daemons and independently on each one. Add automake and
clippy boilerplate for those commands as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Added a CLI "debug route-map" to enble route-map debugs
Added debugs for following triggers
1. Add/delete a route-map
2. Add/delete a sequence in route-map
3. Add/delete a match statement(dependency)
4. Update a dependency
5. Apply a route-map
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
Although the RFC states hostname length should be < 255 chars,
FRR allows infinite length technically. However, when you try
to set a hostname > 80 chars, you would immediately notice a crash.
RCA: Crash due to buffer overflow. Large buffer sprintf'd into smaller
buffer. Usage of sprintf function instead of snprintf which is safer.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
These are necessary to use functions defined in these headers from C++.
Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When reading in config files and we have failures on multiple
lines actually note the actual failure lines and return them.
This fixes an issue where we stopped counting errors after
the first one and we got missleading line numbers that
did not correspond to the actual problem.
This is fixed:
sharpd@donna ~/frr> sudo /usr/lib/frr/pimd --log=stdout -A 127.0.0.1 -f /etc/frr/pimd.conf
2018/10/11 09:41:01 PIM: VRF Created: default(0)
2018/10/11 09:41:01 PIM: pim_vrf_enable: for default
2018/10/11 09:41:01 PIM: zclient_lookup_sched_now: zclient lookup immediate connection scheduled
2018/10/11 09:41:01 PIM: zclient_lookup_new: zclient lookup socket initialized
2018/10/11 09:41:01 PIM: pimd 6.1-dev starting: vty@2611
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 2: inteface lo
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 3: ip igmp
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 4: ip igmp join 224.1.1.1 13.13.13.2
^C2018/10/11 09:45:09 PIM: Terminating on signal SIGINT
2018/10/11 09:45:09 PIM: VRF Deletion: default(0)
Fixes: #3161
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
fabricd is built using the sources of isisd. To allow differentiation
in the code, -DFABRICD=1 is added to its preprocessor flags.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Implement vty shell integration and allow `bfdd` to be configured
through FRR's vtysh.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add the ability to specify the designated log level at startup.
--log-level <emergencies|alerts|critical|errors|warnings|notifications|informational|debugging>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are starting a daemon, allow the user to specify:
--log <stdout|syslog|file:file_name>
This can be used on early startup to put the log files
where the end user wants them to show up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch adds a hook point intended to allow subscribers to modify the
raw text of a CLI command before it is passed to the rest of the CLI
pipeline. To give access to the raw text of the command, a new function
for executing CLI has been defined whose only difference from
`cmd_execute_command` is that it accepts the command to execute as a
string rather than as a string vector.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
I see lots of the same code being copy-pasted and slightly tweaked for
string processing all over the codebase. Time to start aggregating these
pieces into something consistent and correct.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The warning string which appears when the users executes 'no (enable)
password' was moved into command.h and declared as a constant named
'NO_PASSWD_CMD_WARNING'.
This avoids duplicate code and makes it easy to change the warning
message in all places at once.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
VRF static route commands adopt global static config if static config is
placed after a vrf context with no separator, workaround by always
writing static route config before vrf config
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The grammar sandbox has had the ability to dump individual commands as
DOT graphs, but now that generalized DOT support is present it's trivial
to extend this to entire submodes. This is quite useful for visualizing
the CLI space when debugging CLI errors.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This work is derived from a work done by China-Telecom.
That initial work can be found in [0].
As the gap between frr and quagga is important, a reworks has been
done in the meantime.
The initial work consists of bringing the following:
- Bringing the client side of flowspec.
- the enhancement of address-family ipv4/ipv6 flowspec
- partial data path handling at reception has been prepared
- the support for ipv4 flowspec or ipv6 flowspec in BGP open messages,
and the internals of BGP has been done.
- the memory contexts necessary for flowspec has been provisioned
In addition to this work, the following has been done:
- the complement of adaptation for FS safi in bgp code
- the code checkstyle has been reworked so as to match frr checkstyle
- the processing of IPv6 FS NLRI is prevented
- the processing of FS NLRI is stopped ( temporary)
[0] https://github.com/chinatelecom-sdn-group/quagga_flowspec/
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: jaydom <chinatelecom-sdn-group@github.com>
PR #1739 added code to leak routes between (default VRF) VPN safi and unicast RIBs in any VRF. That set of changes included temporary CLI including vpn-policy blocks to specify RD/RT/label/&c. After considerable discussion, we arrived at a consensus CLI shown below.
The code of this PR implements the vpn-specific parts of this syntax:
router bgp <as> [vrf <FOO>]
address-family <afi> unicast
rd (vpn|evpn) export (AS:NN | IP:nn)
label (vpn|evpn) export (0..1048575)
rt (vpn|evpn) (import|export|both) RTLIST...
nexthop vpn (import|export) (A.B.C.D | X:X::X:X)
route-map (vpn|evpn|vrf NAME) (import|export) MAP
[no] import|export [vpn|evpn|evpn8]
[no] import|export vrf NAME
User documentation of the vpn-specific parts of the above syntax is in PR #1937
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
This split is introducing logicalrouter.[ch] as the file that contains
the vty commands to configure logical router feature. The split has as
consequence that the backend of logical router is linux_netns.c formerly
called ns.c. The same relationship exists between VRF and its backend
which may be linux_netns.c file.
The split is adapting ns and vrf fiels so as to :
- clarify header
- ensure that the daemon persepctive, the feature VRF or logical router
is called instead of calling directly ns.
- this implies that VRF will call NS apis, as logical router does.
Also, like it is done for default NS and default VRF, the associated VRF
is enabled first, before NETNS is enabled, so that zvrf->zns pointer is
valid when NETNS discovery applies.
Also, other_netns.c file is a stub handler that will be used for non
linux systems. As NETNS feature is only used by Linux, some BSD systems
may want to use the same backend API to benefit from NETNS. This is what
that file has been done.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The PIM_NODE command is only being used to display
default vrf configuration. Move this into the
vrf display and remove PIM_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is an implementation of draft-ietf-ospf-segment-routing-extensions-24
and RFC7684 for Extended Link & Prefix Opaque LSA.
Look to doc/OSPF_SR.rst for implementation details & known limitations.
New files:
- ospfd/ospf_sr.h: Segment Routing structure definition (SubTLVs + SRDB)
- ospfd/ospf_sr.c: Main functions for Segment Routing support
- ospfd/ospf_ext.h: TLVs and SubTLVs definition for RFC7684
- ospfd/ospf_ext.c: RFC7684 Extended Link / Prefix implementation
- doc/OSPF-SRr.rst: Documentation
Modified Files:
- doc/ospfd.texi: Add new Segment Routing CLI command definition
- lib/command.h: Add new string command for Segment Routing CLI
- lib/mpls.h: Add default value for SRGB
- lib/route_types.txt: Add new OSPF Segment Routing route type
- ospfd/ospf_dump.[c,h]: Add OSPF SR debug
- ospfd/ospf_memory.[c,h]: Add new Segment Routing memory type
- ospfd/ospf_opaque.[c,h]: Add ospf_sr_init() starting function
- ospfd/ospf_ri.c: Add new functions to Set/Get Segment Routing TLVs
Add new ospf_router_info_lsa_upadte() to send Opaque LSA to ospf_sr.c()
- ospfd/ospf_ri.h: Add new Router Information SR SubTLVs
- ospfd/ospf_spf.c: Add new scheduler when running SPF to trigger
update of NHLFE
- ospfd/ospfd.h: Add new thread for Segment Routing scheduler
- ospfd/subdir.am: Add new files
- vtysh/Makefile.am: Add new ospf_sr.c file for vtysh
- zebra/kernel_netlink.c: Add new OSPF_SR route type
- zebra/rt_netlink.[c,h]: Add new OSPF_SR route type
- zebra/zebra_mpls.h: Add new OSPF_SR route type
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The constant to limit # of allowed cli tokens on any one line was
defined in multiple places, all inconsistent with each other. Fix.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit adds support for the RTR protocol to receive ROA
information from a RPKI cache server. That information can than be used
to validate the BGP origin AS of IP prefixes.
Both features are implemented using [rtrlib](http://rtrlib.realmv6.org/).
Signed-off-by: Marcel Röthke <marcel.roethke@haw-hamburg.de>
We expect that the index value passed in for argv_find
should be initially set to 0. This way if the cli
ever changes there is no need to modify the initial
value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This fixes the following
cel-redxp-10# show debugging
Debugging Information for zebra:
Zebra debugging status:
Debugging Information for bgpd:
BGP debugging status:
Debugging Information for watchfrr:
% Command incomplete.
% Command incomplete.
cel-redxp-10#
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Set default hostname in frr to unix hostname.
Provide APIs to get the hostname/domaninanme
Use this APIs where needed
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
1. Added support to create mac filters
2. Enabled route-map commands for EVPN address family
3. Provision to add mac filters under match clause in route-maps
Ticket: CM-16349
Review: CCR-6190
Unit-test: Manual (logs attached to ticket)
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Multi-Instance OSPF configuration CLI would fail because
first client return error upon seeing qobj_index being 0.
With new marco generate new error code to return from each
instance (vtysh client) and if the command is intended for given
instance, its qobj_index would be nonzero and process the command
and push correct ospf context. Other instance would return the error.
On vtysh end, check all instance return an error log a message to a
file.
Testing Done:
Verfied various MI-OSPF configuration CLI with multi instances.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Adds an array of descriptive names for each CLI node, plus a runtime
check to make sure folks don't forget to update it.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Pretty-prints variable autocompletions by breaking them up into multiple
lines, indenting them consistently and respecting the column width of
the terminal.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Implement configuration options for EVPN. The configuration options include
VNI configuration with RD and Import and Export Route Targets. Also, display
the EVPN configuration.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Restoring some code that was unintentionally removed when we were
migrating to Quentin's parser.
Adds "DEFPY()" which invokes an additional layer of preprocessing, so
that we get pre-parsed and named function arguments for the CLI.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Shows known values in the appropriate naming domain when the user hits
<?> or <Tab>. This patch only works in the telnet CLI, the next patch
adds vtysh support.
Included completions:
- interface names
- route-map names
- prefix-list names
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Put core CLI graph stuff in lib/command_graph.[ch] and consistently
prefix all function names with "cmd_".
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
struct cmd_token now has a "varname" field which is derived from the
DEFUN's string definition. It can be manually specified with "$name"
after some token, e.g. "foo WORD$var". A later commit adds code to
automatically fill the value if nothing is specified.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is a direct copy of:
https://github.com/boutier/quagga-merge
From the branch babel-merge
I copied the babeld directory into FRR and then fixed up everything to
compile.
Babeld at this point in time when run will more than likely crash and burn
in it's interfactions with zebra.
I might have messed up the cli, which will need to be looked at
extract.pl.in and vtysh.c need to be fixed up. Additionally we probably
need to work on DEFUN_NOSH conversion in babeld as well
This code comes from:
Matthieu Boutier <boutier@irif.fr>
Juliusz Chroboczek <jch@irif.fr>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove the UNDEFINED_NODE as that it's implementation breaks
our ability in BGP to figure out where we are by allowing
default: in the switch statement.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement support for activating the labeled-unicast address family in
BGP and relevant configuration for this address family.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Please Note, I will be redoing this commit message with
more information.
Additionally I will rework the lib/* changes into their
own commits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Merge the parsed graph into the existing one as a separate step. This
makes it possible to merge identical subgraphs, which is used e.g. in
bgpd for <A.B.C.D|X:X::X:X|WORD> neighbor names.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
