Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There are lib debugs being set but never show up in
`show debug` commands because there was no way to show
that they were being used. Add a bit of infrastructure
to allow this and then use it for `debug route-map`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
It already "looks" like a bitmask, but we currently can't flag a command
both YANG and HIDDEN at the same time. It really should be a bitmask.
Also clarify DEPRECATED behaviour (or the absence thereof.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
It will be used to allow/deny using IPv4 reserved ranges (Class E) for Zebra
(configuring interface address) or BGP (allow next-hop to be from this range).
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
Add to lib/command.c the ability to remember the
release/version/system information and to allow
`show version` to dump some of it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Not much to say here, user docs are coming up in a separate commit.
RFC5424 and (systemd's) journald allow passing structured key-value
data. This stuffs the metadata we have available into there.
The "does the system syslogd support RFC5424" question is unfortunately
not easily answered, so we can only give an affirmative answer on NetBSD
5.0+ or FreeBSD 12+.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
After `<daemon_name> is not running` message vtysh does not return
error. For example if you disable ospf in `/etc/frr/daemons` and run
`vtysh -c configure -c "router ospf"` it prints the message to stderr,
but returns 0.
This commit will make vtysh return error when not in interractive mode.
But if you run commands from vtysh, you will still be able to enter
views and exit them if daemon is not running.
Signed-off-by: Yaroslav Fedoriachenko <yar.fed99@gmail.com>
While defaults are good picks for "reasonable" guesses, min and max
range values really aren't. Operators and experimenters often like to
configure "unreasonable" values to stress test, tests boundary
conditions and explore innovations.
With that in mind, change all ranges to 1..max (of type).
While we're here add optional ignored values in the "no" CLI forms.
Signed-off-by: Christian Hopps <chopps@labn.net>
RFC 3623 specifies the Graceful Restart enhancement to the OSPF
routing protocol. This PR implements support for the restarting mode,
whereas the helper mode was implemented by #6811.
This work is based on #6782, which implemented the pre-restart part
and settled the foundations for the post-restart part (behavioral
changes, GR exit conditions, and on-exit actions).
Here's a quick summary of how the GR restarting mode works:
* GR can be enabled on a per-instance basis using the `graceful-restart
[grace-period (1-1800)]` command;
* To perform a graceful shutdown, the `graceful-restart prepare ospf`
EXEC-level command needs to be issued before restarting the ospfd
daemon (there's no specific requirement on how the daemon should
be restarted);
* `graceful-restart prepare ospf` will initiate the graceful restart
for all GR-enabled instances by taking the following actions:
o Flooding Grace-LSAs over all interfaces
o Freezing the OSPF routes in the RIB
o Saving the end of the grace period in non-volatile memory (a JSON
file stored in `$frr_statedir`)
* Once ospfd is started again, it will follow the procedures
described in RFC 3623 until it detects it's time to exit the graceful
restart (either successfully or unsuccessfully).
Testing done:
* New topotest featuring a multi-area OSPF topology (including stub
and NSSA areas);
* Successful interop tests against IOS-XR routers acting as helpers.
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This commit is a part of #5853 that add new cmd-node for SRv6 configuration.
This commit just add cmd-node and moving node cli only, acutual SRv6 config
command isn't added. (that is added later commit. of this branch)
new cli nodes:
* SRv6
* SRv6-locators
* SRv6-locator
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Show alias name instead of numerical value in `show bgp <prefix>. E.g.:
```
root@exit1-debian-9:~/frr# vtysh -c 'sh run' | grep 'bgp community alias'
bgp community alias 65001:123 community-1
bgp community alias 65001:123:1 lcommunity-1
root@exit1-debian-9:~/frr#
```
```
exit1-debian-9# sh ip bgp 172.16.16.1/32
BGP routing table entry for 172.16.16.1/32, version 21
Paths: (2 available, best #2, table default)
Advertised to non peer-group peers:
65030
192.168.0.2 from home-spine1.donatas.net(192.168.0.2) (172.16.16.1)
Origin incomplete, metric 0, valid, external, best (Neighbor IP)
Community: 65001:12 65001:13 community-1 65001:65534
Large Community: lcommunity-1 65001:123:2
Last update: Fri Apr 16 12:51:27 2021
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The (legacy) code for reading split configs tries to execute config
commands in parent nodes, but doesn't call the node_exit function when
it goes up to a parent node. This breaks BGP RPKI setup (and extended
syslog, which is in the next commit.)
Doing this correctly is a slight bit involved since the node_exit
callbacks should only be called if the command is actually executed on a
parent node.
Signed-off-by: David Lamparter <equinox@diac24.net>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
This allows grabbing a list of all DEFUNs and their help texts through
the xref extraction mechanics.
Signed-off-by: David Lamparter <equinox@diac24.net>
```
exit1-debian-9(config-route-map)# set community
AA:NN Community number in AA:NN format (where AA and NN are (0-65535)) or local-AS|no-advertise|no-export|internet|graceful-shutdown|accept-own-nexthop|accept-own|route-filter-translated-v4|route-filter-v4|route-filter-translated-v6|route-filter-v6|llgr-stale|no-llgr|blackhole|no-peer or additive
none No community attribute
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This new dynamic module makes pathd behave as a PCC for dynamic candidate path
using the external library pcpelib https://github.com/volta-networks/pceplib .
The candidate paths defined as dynamic will trigger computation requests to the
configured PCE, and the PCE response will be used to update the policy.
It supports multiple PCE. The one with smaller precedence will be elected
as the master PCE, and only if the connection repeatedly fails, the PCC will
switch to another PCE.
Example of configuration:
segment-routing
traffic-eng
pcep
pce-config CONF
source-address ip 10.10.10.10
sr-draft07
!
pce PCE1
config CONF
address ip 1.1.1.1
!
pce PCE2
config CONF
address ip 2.2.2.2
!
pcc
peer PCE1 precedence 10
peer PCE2 precedence 20
!
!
!
!
Co-authored-by: Brady Johnson <brady@voltanet.io>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Javier Garcia <javier.garcia@voltanet.io>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
This new daemon manages Segment-Routing Traffic-Engineering
(SR-TE) Policies and installs them into zebra. It provides
the usual yang support and vtysh commands to define or change
SR-TE Policies.
In a nutshell SR-TE Policies provide the possibility to steer
traffic through a (possibly dynamic) list of Segment Routing
segments to the endpoint of the policy. This list of segments
is part of a Candidate Path which again belongs to the SR-TE
Policy. SR-TE Policies are uniquely identified by their color
and endpoint. The color can be used to e.g. match BGP
communities on incoming traffic.
There can be multiple Candidate Paths for a single
policy, the active Candidate Path is chosen according to
certain conditions of which the most important is its
preference. Candidate Paths can be explicit (fixed list of
segments) or dynamic (list of segment comes from e.g. PCEP, see
below).
Configuration example:
segment-routing
traffic-eng
segment-list SL
index 10 mpls label 1111
index 20 mpls label 2222
!
policy color 4 endpoint 10.10.10.4
name POL4
binding-sid 104
candidate-path preference 100 name exp explicit segment-list SL
candidate-path preference 200 name dyn dynamic
!
!
!
There is an important connection between dynamic Candidate
Paths and the overall topic of Path Computation. Later on for
pathd a dynamic module will be introduced that is capable
of communicating via the PCEP protocol with a PCE (Path
Computation Element) which again is capable of calculating
paths according to its local TED (Traffic Engineering Database).
This dynamic module will be able to inject the mentioned
dynamic Candidate Paths into pathd based on calculated paths
from a PCE.
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-policy-06
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
start_config and end_config are already used as function names in DEFUN,
so the current naming is a little bit confusing. Let's use different
names for arguments.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Consolidate evpn type help strings into one single
macro for use on commands that need to support all
the types.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
For the sake of Segment Routing (SR) and Traffic Engineering (TE)
Policies there's a need for additional infrastructure within zebra.
The infrastructure in this PR is supposed to manage such policies
in terms of installing binding SIDs and LSPs. Also it is capable of
managing MPLS labels using the label manager, keeping track of
nexthops (for resolving labels) and notifying interested parties about
changes of a policy/LSP state. Further it enables a route map mechanism
for BGP and SR-TE colors such that learned BGP routes can be mapped
onto SR-TE Policies.
This PR does not introduce any usable features by now, it is just
infrastructure for other upcoming PRs which will introduce 'pathd',
a new SR-TE daemon.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
DEFPY_YANG will allow the CLI to identify which commands are
YANG-modeled or not before executing them. This is going to be
useful for the upcoming configuration back-off timer work that
needs to commit pending configuration changes before executing a
command that isn't YANG-modeled.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Currently, all DEFPY commands are translated into one-liners in
vtysh_cmd.c. After the patch, DEFPY commands are correctly indented just
like DEFUN/ALIAS commands.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
rpki vrf subnode is instantiated under the vrf subnode.
It it to be noted that this commit contains a change in vtysh.
Actually, the output of bgp daemon from show running-config is extracted
in vtysh, and reengineered ( hence the vtysh_config.c change done). This
permits having a subnode under vrf sub node.
Also, add vrf node support to bgpd, as rpki command can not be found
under vrf node.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Rather than doing a f*gly hack for the RPKI code, let's do an on-exit
hook in cmd_node. Also allows replacing some special-casing in the vty
code.
Signed-off-by: David Lamparter <equinox@diac24.net>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
